diff options
author | Sven Schnelle <svens@linux.ibm.com> | 2020-04-28 09:52:23 +0200 |
---|---|---|
committer | Vasily Gorbik <gor@linux.ibm.com> | 2020-08-26 18:47:21 +0200 |
commit | 4bff8cb5450287e246d365b719148b2d9364c292 (patch) | |
tree | 4cc4c378f7541d4b8fd080663d2f0847a24c2cfc /arch/s390/kernel/time.c | |
parent | 98ad45fb58c14ebef6da27f91905e5b8fcff8686 (diff) | |
download | linux-4bff8cb5450287e246d365b719148b2d9364c292.tar.bz2 |
s390: convert to GENERIC_VDSO
Convert s390 to generic vDSO. There are a few special things on s390:
- vDSO can be called without a stack frame - glibc did this in the past.
So we need to allocate a stackframe on our own.
- The former assembly code used stcke to get the TOD clock and applied
time steering to it. We need to do the same in the new code. This is done
in the architecture specific __arch_get_hw_counter function. The steering
information is stored in an architecure specific area in the vDSO data.
- CPUCLOCK_VIRT is now handled with a syscall fallback, which might
be slower/less accurate than the old implementation.
The getcpu() function stays as an assembly function because there is no
generic implementation and the code is just a few lines.
Performance number from my system do 100 mio gettimeofday() calls:
Plain syscall: 8.6s
Generic VDSO: 1.3s
old ASM VDSO: 1s
So it's a bit slower but still much faster than syscalls.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Diffstat (limited to 'arch/s390/kernel/time.c')
-rw-r--r-- | arch/s390/kernel/time.c | 66 |
1 files changed, 10 insertions, 56 deletions
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 513e59d08a55..bc806e1547d6 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -41,6 +41,9 @@ #include <linux/gfp.h> #include <linux/kprobes.h> #include <linux/uaccess.h> +#include <vdso/vsyscall.h> +#include <vdso/clocksource.h> +#include <vdso/helpers.h> #include <asm/facility.h> #include <asm/delay.h> #include <asm/div64.h> @@ -84,7 +87,7 @@ void __init time_early_init(void) /* Initialize TOD steering parameters */ tod_steering_end = *(unsigned long long *) &tod_clock_base[1]; - vdso_data->ts_end = tod_steering_end; + vdso_data->arch_data.tod_steering_end = tod_steering_end; if (!test_facility(28)) return; @@ -257,6 +260,7 @@ static struct clocksource clocksource_tod = { .mult = 1000, .shift = 12, .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .vdso_clock_mode = VDSO_CLOCKMODE_TOD, }; struct clocksource * __init clocksource_default_clock(void) @@ -264,56 +268,6 @@ struct clocksource * __init clocksource_default_clock(void) return &clocksource_tod; } -void update_vsyscall(struct timekeeper *tk) -{ - u64 nsecps; - - if (tk->tkr_mono.clock != &clocksource_tod) - return; - - /* Make userspace gettimeofday spin until we're done. */ - ++vdso_data->tb_update_count; - smp_wmb(); - vdso_data->xtime_tod_stamp = tk->tkr_mono.cycle_last; - vdso_data->xtime_clock_sec = tk->xtime_sec; - vdso_data->xtime_clock_nsec = tk->tkr_mono.xtime_nsec; - vdso_data->wtom_clock_sec = - tk->xtime_sec + tk->wall_to_monotonic.tv_sec; - vdso_data->wtom_clock_nsec = tk->tkr_mono.xtime_nsec + - + ((u64) tk->wall_to_monotonic.tv_nsec << tk->tkr_mono.shift); - nsecps = (u64) NSEC_PER_SEC << tk->tkr_mono.shift; - while (vdso_data->wtom_clock_nsec >= nsecps) { - vdso_data->wtom_clock_nsec -= nsecps; - vdso_data->wtom_clock_sec++; - } - - vdso_data->xtime_coarse_sec = tk->xtime_sec; - vdso_data->xtime_coarse_nsec = - (long)(tk->tkr_mono.xtime_nsec >> tk->tkr_mono.shift); - vdso_data->wtom_coarse_sec = - vdso_data->xtime_coarse_sec + tk->wall_to_monotonic.tv_sec; - vdso_data->wtom_coarse_nsec = - vdso_data->xtime_coarse_nsec + tk->wall_to_monotonic.tv_nsec; - while (vdso_data->wtom_coarse_nsec >= NSEC_PER_SEC) { - vdso_data->wtom_coarse_nsec -= NSEC_PER_SEC; - vdso_data->wtom_coarse_sec++; - } - - vdso_data->tk_mult = tk->tkr_mono.mult; - vdso_data->tk_shift = tk->tkr_mono.shift; - vdso_data->hrtimer_res = hrtimer_resolution; - smp_wmb(); - ++vdso_data->tb_update_count; -} - -extern struct timezone sys_tz; - -void update_vsyscall_tz(void) -{ - vdso_data->tz_minuteswest = sys_tz.tz_minuteswest; - vdso_data->tz_dsttime = sys_tz.tz_dsttime; -} - /* * Initialize the TOD clock and the CPU timer of * the boot cpu. @@ -431,7 +385,6 @@ static void clock_sync_global(unsigned long long delta) /* Epoch overflow */ tod_clock_base[0]++; /* Adjust TOD steering parameters. */ - vdso_data->tb_update_count++; now = get_tod_clock(); adj = tod_steering_end - now; if (unlikely((s64) adj >= 0)) @@ -443,9 +396,8 @@ static void clock_sync_global(unsigned long long delta) panic("TOD clock sync offset %lli is too large to drift\n", tod_steering_delta); tod_steering_end = now + (abs(tod_steering_delta) << 15); - vdso_data->ts_dir = (tod_steering_delta < 0) ? 0 : 1; - vdso_data->ts_end = tod_steering_end; - vdso_data->tb_update_count++; + vdso_data->arch_data.tod_steering_end = tod_steering_end; + /* Update LPAR offset. */ if (ptff_query(PTFF_QTO) && ptff(&qto, sizeof(qto), PTFF_QTO) == 0) lpar_offset = qto.tod_epoch_difference; @@ -586,7 +538,7 @@ void stp_queue_work(void) static int stp_sync_clock(void *data) { struct clock_sync_data *sync = data; - unsigned long long clock_delta; + unsigned long long clock_delta, flags; static int first; int rc; @@ -599,6 +551,7 @@ static int stp_sync_clock(void *data) if (stp_info.todoff[0] || stp_info.todoff[1] || stp_info.todoff[2] || stp_info.todoff[3] || stp_info.tmd != 2) { + flags = vdso_update_begin(); rc = chsc_sstpc(stp_page, STP_OP_SYNC, 0, &clock_delta); if (rc == 0) { @@ -609,6 +562,7 @@ static int stp_sync_clock(void *data) if (rc == 0 && stp_info.tmd != 2) rc = -EAGAIN; } + vdso_update_end(flags); } sync->in_sync = rc ? -EAGAIN : 1; xchg(&first, 0); |