Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

The UDP reuseport conflict was a little bit tricky.

The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.

At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.

This requires moving the reuseport_has_conns() logic into the callers.

While we are here, get rid of inline directives as they do not belong
in foo.c files.

The other changes were cases of more straightforward overlapping
modifications.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 71 insertions, 33 deletions

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 128192e14ff2..3230c1d48562 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -23,6 +23,8 @@ config RISCV
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
diff --git a/arch/riscv/include/asm/barrier.h b/arch/riscv/include/asm/barrier.h
index 3f1737f301cc..d0e24aaa2aa0 100644
--- a/arch/riscv/include/asm/barrier.h
+++ b/arch/riscv/include/asm/barrier.h
@@ -58,8 +58,16 @@ do {									\
  * The AQ/RL pair provides a RCpc critical section, but there's not really any
  * way we can take advantage of that here because the ordering is only enforced
  * on that one lock.  Thus, we're just doing a full fence.
+ *
+ * Since we allow writeX to be called from preemptive regions we need at least
+ * an "o" in the predecessor set to ensure device writes are visible before the
+ * task is marked as available for scheduling on a new hart.  While I don't see
+ * any concrete reason we need a full IO fence, it seems safer to just upgrade
+ * this in order to avoid any IO crossing a scheduling boundary.  In both
+ * instances the scheduler pairs this with an mb(), so nothing is necessary on
+ * the new hart.
  */
-#define smp_mb__after_spinlock()	RISCV_FENCE(rw,rw)
+#define smp_mb__after_spinlock()	RISCV_FENCE(iorw,iorw)
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/riscv/include/asm/gdb_xml.h b/arch/riscv/include/asm/gdb_xml.h
index 041b45f5b997..09342111f227 100644
--- a/arch/riscv/include/asm/gdb_xml.h
+++ b/arch/riscv/include/asm/gdb_xml.h
@@ -3,8 +3,7 @@
 #ifndef __ASM_GDB_XML_H_
 #define __ASM_GDB_XML_H_
 
-#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
-static const char riscv_gdb_stub_feature[64] =
+const char riscv_gdb_stub_feature[64] =
 			"PacketSize=800;qXfer:features:read+;";
 
 static const char gdb_xfer_read_target[31] = "qXfer:features:read:target.xml:";
diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h
index 8177a457caff..46677daf708b 100644
--- a/arch/riscv/include/asm/kgdb.h
+++ b/arch/riscv/include/asm/kgdb.h
@@ -19,7 +19,6 @@
 
 #ifndef	__ASSEMBLY__
 
-extern int kgdb_has_hit_break(unsigned long addr);
 extern unsigned long kgdb_compiled_break;
 
 static inline void arch_kgdb_breakpoint(void)
@@ -106,7 +105,9 @@ static inline void arch_kgdb_breakpoint(void)
 #define DBG_REG_BADADDR_OFF 34
 #define DBG_REG_CAUSE_OFF 35
 
-#include <asm/gdb_xml.h>
+extern const char riscv_gdb_stub_feature[64];
+
+#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
 
 #endif
 #endif
diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
index 1dd12a0cbb2b..464a2bbc97ea 100644
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -12,7 +12,11 @@
 #include <linux/const.h>
 
 /* thread information allocation */
+#ifdef CONFIG_64BIT
+#define THREAD_SIZE_ORDER	(2)
+#else
 #define THREAD_SIZE_ORDER	(1)
+#endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
 #ifndef __ASSEMBLY__
diff --git a/arch/riscv/kernel/kgdb.c b/arch/riscv/kernel/kgdb.c
index c3275f42d1ac..963ed7edcff2 100644
--- a/arch/riscv/kernel/kgdb.c
+++ b/arch/riscv/kernel/kgdb.c
@@ -44,18 +44,18 @@ DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ)
 DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ)
 DECLARE_INSN(sret, MATCH_SRET, MASK_SRET)
 
-int decode_register_index(unsigned long opcode, int offset)
+static int decode_register_index(unsigned long opcode, int offset)
 {
 	return (opcode >> offset) & 0x1F;
 }
 
-int decode_register_index_short(unsigned long opcode, int offset)
+static int decode_register_index_short(unsigned long opcode, int offset)
 {
 	return ((opcode >> offset) & 0x7) + 8;
 }
 
 /* Calculate the new address for after a step */
-int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
+static int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
 {
 	unsigned long pc = regs->epc;
 	unsigned long *regs_ptr = (unsigned long *)regs;
@@ -136,7 +136,7 @@ int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
 	return 0;
 }
 
-int do_single_step(struct pt_regs *regs)
+static int do_single_step(struct pt_regs *regs)
 {
 	/* Determine where the target instruction will send us to */
 	unsigned long addr = 0;
@@ -320,7 +320,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 	return err;
 }
 
-int kgdb_riscv_kgdbbreak(unsigned long addr)
+static int kgdb_riscv_kgdbbreak(unsigned long addr)
 {
 	if (stepped_address == addr)
 		return KGDB_SW_SINGLE_STEP;
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index f4adb3684f3d..79e9d55bdf1a 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -95,19 +95,40 @@ void __init mem_init(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
+	phys_addr_t start;
 	unsigned long size;
 
-	if (initrd_start >= initrd_end) {
-		pr_info("initrd not found or empty");
+	/* Ignore the virtul address computed during device tree parsing */
+	initrd_start = initrd_end = 0;
+
+	if (!phys_initrd_size)
+		return;
+	/*
+	 * Round the memory region to page boundaries as per free_initrd_mem()
+	 * This allows us to detect whether the pages overlapping the initrd
+	 * are in use, but more importantly, reserves the entire set of pages
+	 * as we don't want these pages allocated for other purposes.
+	 */
+	start = round_down(phys_initrd_start, PAGE_SIZE);
+	size = phys_initrd_size + (phys_initrd_start - start);
+	size = round_up(size, PAGE_SIZE);
+
+	if (!memblock_is_region_memory(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region",
+		       (u64)start, size);
 		goto disable;
 	}
-	if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		pr_err("initrd extends beyond end of memory");
+
+	if (memblock_is_region_reserved(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n",
+		       (u64)start, size);
 		goto disable;
 	}
 
-	size = initrd_end - initrd_start;
-	memblock_reserve(__pa_symbol(initrd_start), size);
+	memblock_reserve(start, size);
+	/* Now convert initrd to virtual addresses */
+	initrd_start = (unsigned long)__va(phys_initrd_start);
+	initrd_end = initrd_start + phys_initrd_size;
 	initrd_below_start_ok = 1;
 
 	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
@@ -126,33 +147,36 @@ void __init setup_bootmem(void)
 {
 	struct memblock_region *reg;
 	phys_addr_t mem_size = 0;
+	phys_addr_t total_mem = 0;
+	phys_addr_t mem_start, end = 0;
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
 	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 
 	/* Find the memory region containing the kernel */
 	for_each_memblock(memory, reg) {
-		phys_addr_t end = reg->base + reg->size;
-
-		if (reg->base <= vmlinux_start && vmlinux_end <= end) {
-			mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
-
-			/*
-			 * Remove memblock from the end of usable area to the
-			 * end of region
-			 */
-			if (reg->base + mem_size < end)
-				memblock_remove(reg->base + mem_size,
-						end - reg->base - mem_size);
-		}
+		end = reg->base + reg->size;
+		if (!total_mem)
+			mem_start = reg->base;
+		if (reg->base <= vmlinux_start && vmlinux_end <= end)
+			BUG_ON(reg->size == 0);
+		total_mem = total_mem + reg->size;
 	}
-	BUG_ON(mem_size == 0);
+
+	/*
+	 * Remove memblock from the end of usable area to the
+	 * end of region
+	 */
+	mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET);
+	if (mem_start + mem_size < end)
+		memblock_remove(mem_start + mem_size,
+				end - mem_start - mem_size);
 
 	/* Reserve from the start of the kernel to the end of the kernel */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-	set_max_mapnr(PFN_DOWN(mem_size));
 	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 	max_low_pfn = max_pfn;
+	set_max_mapnr(max_low_pfn);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	setup_initrd();
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index 4a8b61806633..87b4ab3d3c77 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void)
 				(__pa(((uintptr_t) kasan_early_shadow_pmd))),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 }
 
 static void __init populate(void *start, void *end)
@@ -79,7 +79,7 @@ static void __init populate(void *start, void *end)
 			pfn_pgd(PFN_DOWN(__pa(&pmd[offset])),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 	memset(start, 0, end - start);
 }