Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO

4 files changed, 3 insertions, 10 deletions

diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 421fa3585798..28a0d1cb374c 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -54,6 +54,7 @@
 /* Interrupt Enable and Interrupt Pending flags */
 #define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */
 #define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */
+#define SIE_SEIE _AC(0x00000200, UL) /* External Interrupt Enable */
 
 #define EXC_INST_MISALIGNED     0
 #define EXC_INST_ACCESS         1
diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h
index 4dee9d4c13c0..996b6fbe17a6 100644
--- a/arch/riscv/include/asm/irq.h
+++ b/arch/riscv/include/asm/irq.h
@@ -17,11 +17,8 @@
 
 #define NR_IRQS         0
 
-#define INTERRUPT_CAUSE_SOFTWARE    1
-#define INTERRUPT_CAUSE_TIMER       5
-#define INTERRUPT_CAUSE_EXTERNAL    9
-
 void riscv_timer_interrupt(void);
+void riscv_software_interrupt(void);
 
 #include <asm-generic/irq.h>
 
diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
index 0e638a0c3feb..aefbfaa6a781 100644
--- a/arch/riscv/include/asm/perf_event.h
+++ b/arch/riscv/include/asm/perf_event.h
@@ -10,6 +10,7 @@
 
 #include <linux/perf_event.h>
 #include <linux/ptrace.h>
+#include <linux/interrupt.h>
 
 #define RISCV_BASE_COUNTERS	2
 
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 85e4220839b0..36016845461d 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -25,9 +25,6 @@
 #ifdef CONFIG_SMP
 
 /* SMP initialization hook for setup_arch */
-void __init init_clockevent(void);
-
-/* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
 /* Hook for the generic smp_call_function_many() routine. */
@@ -44,9 +41,6 @@ void arch_send_call_function_single_ipi(int cpu);
  */
 #define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
 
-/* Interprocessor interrupt handler */
-irqreturn_t handle_ipi(void);
-
 #endif /* CONFIG_SMP */
 
 #endif /* _ASM_RISCV_SMP_H */