ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc

32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>

4 files changed, 1 insertions, 2443 deletions

diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 5cb62c6a51c8..490749ca88f9 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -38,8 +38,6 @@ endif
 obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
 				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
 obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_OF)		+= prom_init.o prom.o
-obj-$(CONFIG_PPC_CHRP)		+= open_pic.o
 obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
 obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 38e5b93fbe41..70456c8f998c 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -216,7 +216,7 @@ static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
 u_int openpic_read_IPI(volatile u_int __iomem * addr)
 {
          u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN) || defined(CONFIG_POWER3)
+#if defined(OPENPIC_BIG_ENDIAN)
         val = in_be32(addr);
 #else
         val = in_le32(addr);
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
deleted file mode 100644
index 482f837fd373..000000000000
--- a/arch/ppc/syslib/prom.c
+++ /dev/null
@@ -1,1429 +0,0 @@
-/*
- * Procedures for interfacing to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * In particular, we are interested in the device tree
- * and in using some of its services (exit, write to stdout).
- *
- * Paul Mackerras	August 1996.
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <stdarg.h>
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-
-
-struct pci_address {
-	unsigned a_hi;
-	unsigned a_mid;
-	unsigned a_lo;
-};
-
-struct pci_reg_property {
-	struct pci_address addr;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct isa_reg_property {
-	unsigned space;
-	unsigned address;
-	unsigned size;
-};
-
-typedef unsigned long interpret_func(struct device_node *, unsigned long,
-				     int, int);
-static interpret_func interpret_pci_props;
-static interpret_func interpret_dbdma_props;
-static interpret_func interpret_isa_props;
-static interpret_func interpret_macio_props;
-static interpret_func interpret_root_props;
-
-extern char *klimit;
-
-/* Set for a newworld or CHRP machine */
-int use_of_interrupt_tree;
-struct device_node *dflt_interrupt_controller;
-int num_interrupt_controllers;
-
-extern unsigned int rtas_entry;  /* physical pointer */
-
-extern struct device_node *allnodes;
-
-static unsigned long finish_node(struct device_node *, unsigned long,
-				 interpret_func *, int, int);
-static unsigned long finish_node_interrupts(struct device_node *, unsigned long);
-static struct device_node *find_phandle(phandle);
-
-extern void enter_rtas(void *);
-void phys_call_rtas(int, int, int, ...);
-
-extern char cmd_line[512];	/* XXX */
-extern boot_infos_t *boot_infos;
-unsigned long dev_tree_size;
-
-void
-phys_call_rtas(int service, int nargs, int nret, ...)
-{
-	va_list list;
-	union {
-		unsigned long words[16];
-		double align;
-	} u;
-	void (*rtas)(void *, unsigned long);
-	int i;
-
-	u.words[0] = service;
-	u.words[1] = nargs;
-	u.words[2] = nret;
-	va_start(list, nret);
-	for (i = 0; i < nargs; ++i)
-		u.words[i+3] = va_arg(list, unsigned long);
-	va_end(list);
-
-	rtas = (void (*)(void *, unsigned long)) rtas_entry;
-	rtas(&u, rtas_data);
-}
-
-/*
- * finish_device_tree is called once things are running normally
- * (i.e. with text and data mapped to the address they were linked at).
- * It traverses the device tree and fills in the name, type,
- * {n_}addrs and {n_}intrs fields of each node.
- */
-void __init
-finish_device_tree(void)
-{
-	unsigned long mem = (unsigned long) klimit;
-	struct device_node *np;
-
-	/* All CHRPs now use the interrupt tree */
-	for (np = allnodes; np != NULL; np = np->allnext) {
-		if (get_property(np, "interrupt-parent", NULL)) {
-			use_of_interrupt_tree = 1;
-			break;
-		}
-	}
-
-	if (use_of_interrupt_tree) {
-		/*
-		 * We want to find out here how many interrupt-controller
-		 * nodes there are, and if we are booted from BootX,
-		 * we need a pointer to the first (and hopefully only)
-		 * such node.  But we can't use find_devices here since
-		 * np->name has not been set yet.  -- paulus
-		 */
-		int n = 0;
-		char *name, *ic;
-		int iclen;
-
-		for (np = allnodes; np != NULL; np = np->allnext) {
-			ic = get_property(np, "interrupt-controller", &iclen);
-			name = get_property(np, "name", NULL);
-			/* checking iclen makes sure we don't get a false
-			   match on /chosen.interrupt_controller */
-			if ((name != NULL
-			     && strcmp(name, "interrupt-controller") == 0)
-			    || (ic != NULL && iclen == 0 && strcmp(name, "AppleKiwi"))) {
-				if (n == 0)
-					dflt_interrupt_controller = np;
-				++n;
-			}
-		}
-		num_interrupt_controllers = n;
-	}
-
-	mem = finish_node(allnodes, mem, NULL, 1, 1);
-	dev_tree_size = mem - (unsigned long) allnodes;
-	klimit = (char *) mem;
-}
-
-static unsigned long __init
-finish_node(struct device_node *np, unsigned long mem_start,
-	    interpret_func *ifunc, int naddrc, int nsizec)
-{
-	struct device_node *child;
-	int *ip;
-
-	np->name = get_property(np, "name", NULL);
-	np->type = get_property(np, "device_type", NULL);
-
-	if (!np->name)
-		np->name = "<NULL>";
-	if (!np->type)
-		np->type = "<NULL>";
-
-	/* get the device addresses and interrupts */
-	if (ifunc != NULL)
-		mem_start = ifunc(np, mem_start, naddrc, nsizec);
-
-	if (use_of_interrupt_tree)
-		mem_start = finish_node_interrupts(np, mem_start);
-
-	/* Look for #address-cells and #size-cells properties. */
-	ip = (int *) get_property(np, "#address-cells", NULL);
-	if (ip != NULL)
-		naddrc = *ip;
-	ip = (int *) get_property(np, "#size-cells", NULL);
-	if (ip != NULL)
-		nsizec = *ip;
-
-	if (np->parent == NULL)
-		ifunc = interpret_root_props;
-	else if (np->type == 0)
-		ifunc = NULL;
-	else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci"))
-		ifunc = interpret_pci_props;
-	else if (!strcmp(np->type, "dbdma"))
-		ifunc = interpret_dbdma_props;
-	else if (!strcmp(np->type, "mac-io")
-		 || ifunc == interpret_macio_props)
-		ifunc = interpret_macio_props;
-	else if (!strcmp(np->type, "isa"))
-		ifunc = interpret_isa_props;
-	else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3"))
-		ifunc = interpret_root_props;
-	else if (!((ifunc == interpret_dbdma_props
-		    || ifunc == interpret_macio_props)
-		   && (!strcmp(np->type, "escc")
-		       || !strcmp(np->type, "media-bay"))))
-		ifunc = NULL;
-
-	/* if we were booted from BootX, convert the full name */
-	if (boot_infos
-	    && strncmp(np->full_name, "Devices:device-tree", 19) == 0) {
-		if (np->full_name[19] == 0) {
-			strcpy(np->full_name, "/");
-		} else if (np->full_name[19] == ':') {
-			char *p = np->full_name + 19;
-			np->full_name = p;
-			for (; *p; ++p)
-				if (*p == ':')
-					*p = '/';
-		}
-	}
-
-	for (child = np->child; child != NULL; child = child->sibling)
-		mem_start = finish_node(child, mem_start, ifunc,
-					naddrc, nsizec);
-
-	return mem_start;
-}
-
-/*
- * Find the interrupt parent of a node.
- */
-static struct device_node * __init
-intr_parent(struct device_node *p)
-{
-	phandle *parp;
-
-	parp = (phandle *) get_property(p, "interrupt-parent", NULL);
-	if (parp == NULL)
-		return p->parent;
-	p = find_phandle(*parp);
-	if (p != NULL)
-		return p;
-	/*
-	 * On a powermac booted with BootX, we don't get to know the
-	 * phandles for any nodes, so find_phandle will return NULL.
-	 * Fortunately these machines only have one interrupt controller
-	 * so there isn't in fact any ambiguity.  -- paulus
-	 */
-	if (num_interrupt_controllers == 1)
-		p = dflt_interrupt_controller;
-	return p;
-}
-
-/*
- * Find out the size of each entry of the interrupts property
- * for a node.
- */
-static int __init
-prom_n_intr_cells(struct device_node *np)
-{
-	struct device_node *p;
-	unsigned int *icp;
-
-	for (p = np; (p = intr_parent(p)) != NULL; ) {
-		icp = (unsigned int *)
-			get_property(p, "#interrupt-cells", NULL);
-		if (icp != NULL)
-			return *icp;
-		if (get_property(p, "interrupt-controller", NULL) != NULL
-		    || get_property(p, "interrupt-map", NULL) != NULL) {
-			printk("oops, node %s doesn't have #interrupt-cells\n",
-			       p->full_name);
-			return 1;
-		}
-	}
-	printk("prom_n_intr_cells failed for %s\n", np->full_name);
-	return 1;
-}
-
-/*
- * Map an interrupt from a device up to the platform interrupt
- * descriptor.
- */
-static int __init
-map_interrupt(unsigned int **irq, struct device_node **ictrler,
-	      struct device_node *np, unsigned int *ints, int nintrc)
-{
-	struct device_node *p, *ipar;
-	unsigned int *imap, *imask, *ip;
-	int i, imaplen, match;
-	int newintrc = 1, newaddrc = 1;
-	unsigned int *reg;
-	int naddrc;
-
-	reg = (unsigned int *) get_property(np, "reg", NULL);
-	naddrc = prom_n_addr_cells(np);
-	p = intr_parent(np);
-	while (p != NULL) {
-		if (get_property(p, "interrupt-controller", NULL) != NULL)
-			/* this node is an interrupt controller, stop here */
-			break;
-		imap = (unsigned int *)
-			get_property(p, "interrupt-map", &imaplen);
-		if (imap == NULL) {
-			p = intr_parent(p);
-			continue;
-		}
-		imask = (unsigned int *)
-			get_property(p, "interrupt-map-mask", NULL);
-		if (imask == NULL) {
-			printk("oops, %s has interrupt-map but no mask\n",
-			       p->full_name);
-			return 0;
-		}
-		imaplen /= sizeof(unsigned int);
-		match = 0;
-		ipar = NULL;
-		while (imaplen > 0 && !match) {
-			/* check the child-interrupt field */
-			match = 1;
-			for (i = 0; i < naddrc && match; ++i)
-				match = ((reg[i] ^ imap[i]) & imask[i]) == 0;
-			for (; i < naddrc + nintrc && match; ++i)
-				match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0;
-			imap += naddrc + nintrc;
-			imaplen -= naddrc + nintrc;
-			/* grab the interrupt parent */
-			ipar = find_phandle((phandle) *imap++);
-			--imaplen;
-			if (ipar == NULL && num_interrupt_controllers == 1)
-				/* cope with BootX not giving us phandles */
-				ipar = dflt_interrupt_controller;
-			if (ipar == NULL) {
-				printk("oops, no int parent %x in map of %s\n",
-				       imap[-1], p->full_name);
-				return 0;
-			}
-			/* find the parent's # addr and intr cells */
-			ip = (unsigned int *)
-				get_property(ipar, "#interrupt-cells", NULL);
-			if (ip == NULL) {
-				printk("oops, no #interrupt-cells on %s\n",
-				       ipar->full_name);
-				return 0;
-			}
-			newintrc = *ip;
-			ip = (unsigned int *)
-				get_property(ipar, "#address-cells", NULL);
-			newaddrc = (ip == NULL)? 0: *ip;
-			imap += newaddrc + newintrc;
-			imaplen -= newaddrc + newintrc;
-		}
-		if (imaplen < 0) {
-			printk("oops, error decoding int-map on %s, len=%d\n",
-			       p->full_name, imaplen);
-			return 0;
-		}
-		if (!match) {
-			printk("oops, no match in %s int-map for %s\n",
-			       p->full_name, np->full_name);
-			return 0;
-		}
-		p = ipar;
-		naddrc = newaddrc;
-		nintrc = newintrc;
-		ints = imap - nintrc;
-		reg = ints - naddrc;
-	}
-	if (p == NULL)
-		printk("hmmm, int tree for %s doesn't have ctrler\n",
-		       np->full_name);
-	*irq = ints;
-	*ictrler = p;
-	return nintrc;
-}
-
-/*
- * New version of finish_node_interrupts.
- */
-static unsigned long __init
-finish_node_interrupts(struct device_node *np, unsigned long mem_start)
-{
-	unsigned int *ints;
-	int intlen, intrcells;
-	int i, j, n, offset;
-	unsigned int *irq;
-	struct device_node *ic;
-
-	ints = (unsigned int *) get_property(np, "interrupts", &intlen);
-	if (ints == NULL)
-		return mem_start;
-	intrcells = prom_n_intr_cells(np);
-	intlen /= intrcells * sizeof(unsigned int);
-	np->n_intrs = intlen;
-	np->intrs = (struct interrupt_info *) mem_start;
-	mem_start += intlen * sizeof(struct interrupt_info);
-
-	for (i = 0; i < intlen; ++i) {
-		np->intrs[i].line = 0;
-		np->intrs[i].sense = 1;
-		n = map_interrupt(&irq, &ic, np, ints, intrcells);
-		if (n <= 0)
-			continue;
-		offset = 0;
-		/*
-		 * On a CHRP we have an 8259 which is subordinate to
-		 * the openpic in the interrupt tree, but we want the
-		 * openpic's interrupt numbers offsetted, not the 8259's.
-		 * So we apply the offset if the controller is at the
-		 * root of the interrupt tree, i.e. has no interrupt-parent.
-		 * This doesn't cope with the general case of multiple
-		 * cascaded interrupt controllers, but then neither will
-		 * irq.c at the moment either.  -- paulus
-		 * The G5 triggers that code, I add a machine test. On
-		 * those machines, we want to offset interrupts from the
-		 * second openpic by 128 -- BenH
-		 */
-		if (num_interrupt_controllers > 1
-		    && ic != NULL
-		    && get_property(ic, "interrupt-parent", NULL) == NULL)
-			offset = 16;
-
-		np->intrs[i].line = irq[0] + offset;
-		if (n > 1)
-			np->intrs[i].sense = irq[1];
-		if (n > 2) {
-			printk("hmmm, got %d intr cells for %s:", n,
-			       np->full_name);
-			for (j = 0; j < n; ++j)
-				printk(" %d", irq[j]);
-			printk("\n");
-		}
-		ints += intrcells;
-	}
-
-	return mem_start;
-}
-
-/*
- * When BootX makes a copy of the device tree from the MacOS
- * Name Registry, it is in the format we use but all of the pointers
- * are offsets from the start of the tree.
- * This procedure updates the pointers.
- */
-void __init
-relocate_nodes(void)
-{
-	unsigned long base;
-	struct device_node *np;
-	struct property *pp;
-
-#define ADDBASE(x)	(x = (typeof (x))((x)? ((unsigned long)(x) + base): 0))
-
-	base = (unsigned long) boot_infos + boot_infos->deviceTreeOffset;
-	allnodes = (struct device_node *)(base + 4);
-	for (np = allnodes; np != 0; np = np->allnext) {
-		ADDBASE(np->full_name);
-		ADDBASE(np->properties);
-		ADDBASE(np->parent);
-		ADDBASE(np->child);
-		ADDBASE(np->sibling);
-		ADDBASE(np->allnext);
-		for (pp = np->properties; pp != 0; pp = pp->next) {
-			ADDBASE(pp->name);
-			ADDBASE(pp->value);
-			ADDBASE(pp->next);
-		}
-	}
-}
-
-int
-prom_n_addr_cells(struct device_node* np)
-{
-	int* ip;
-	do {
-		if (np->parent)
-			np = np->parent;
-		ip = (int *) get_property(np, "#address-cells", NULL);
-		if (ip != NULL)
-			return *ip;
-	} while (np->parent);
-	/* No #address-cells property for the root node, default to 1 */
-	return 1;
-}
-
-int
-prom_n_size_cells(struct device_node* np)
-{
-	int* ip;
-	do {
-		if (np->parent)
-			np = np->parent;
-		ip = (int *) get_property(np, "#size-cells", NULL);
-		if (ip != NULL)
-			return *ip;
-	} while (np->parent);
-	/* No #size-cells property for the root node, default to 1 */
-	return 1;
-}
-
-static unsigned long __init
-map_addr(struct device_node *np, unsigned long space, unsigned long addr)
-{
-	int na;
-	unsigned int *ranges;
-	int rlen = 0;
-	unsigned int type;
-
-	type = (space >> 24) & 3;
-	if (type == 0)
-		return addr;
-
-	while ((np = np->parent) != NULL) {
-		if (strcmp(np->type, "pci") != 0)
-			continue;
-		/* PCI bridge: map the address through the ranges property */
-		na = prom_n_addr_cells(np);
-		ranges = (unsigned int *) get_property(np, "ranges", &rlen);
-		while ((rlen -= (na + 5) * sizeof(unsigned int)) >= 0) {
-			if (((ranges[0] >> 24) & 3) == type
-			    && ranges[2] <= addr
-			    && addr - ranges[2] < ranges[na+4]) {
-				/* ok, this matches, translate it */
-				addr += ranges[na+2] - ranges[2];
-				break;
-			}
-			ranges += na + 5;
-		}
-	}
-	return addr;
-}
-
-static unsigned long __init
-interpret_pci_props(struct device_node *np, unsigned long mem_start,
-		    int naddrc, int nsizec)
-{
-	struct address_range *adr;
-	struct pci_reg_property *pci_addrs;
-	int i, l, *ip;
-
-	pci_addrs = (struct pci_reg_property *)
-		get_property(np, "assigned-addresses", &l);
-	if (pci_addrs != 0 && l >= sizeof(struct pci_reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct pci_reg_property)) >= 0) {
-			adr[i].space = pci_addrs[i].addr.a_hi;
-			adr[i].address = map_addr(np, pci_addrs[i].addr.a_hi,
-						  pci_addrs[i].addr.a_lo);
-			adr[i].size = pci_addrs[i].size_lo;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0 && np->parent)
-		ip = (int *) get_property(np->parent, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_dbdma_props(struct device_node *np, unsigned long mem_start,
-		      int naddrc, int nsizec)
-{
-	struct reg_property *rp;
-	struct address_range *adr;
-	unsigned long base_address;
-	int i, l, *ip;
-	struct device_node *db;
-
-	base_address = 0;
-	for (db = np->parent; db != NULL; db = db->parent) {
-		if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) {
-			base_address = db->addrs[0].address;
-			break;
-		}
-	}
-
-	rp = (struct reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = 2;
-			adr[i].address = rp[i].address + base_address;
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_macio_props(struct device_node *np, unsigned long mem_start,
-		      int naddrc, int nsizec)
-{
-	struct reg_property *rp;
-	struct address_range *adr;
-	unsigned long base_address;
-	int i, l, *ip;
-	struct device_node *db;
-
-	base_address = 0;
-	for (db = np->parent; db != NULL; db = db->parent) {
-		if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) {
-			base_address = db->addrs[0].address;
-			break;
-		}
-	}
-
-	rp = (struct reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = 2;
-			adr[i].address = rp[i].address + base_address;
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_isa_props(struct device_node *np, unsigned long mem_start,
-		    int naddrc, int nsizec)
-{
-	struct isa_reg_property *rp;
-	struct address_range *adr;
-	int i, l, *ip;
-
-	rp = (struct isa_reg_property *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= sizeof(struct isa_reg_property)) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= sizeof(struct reg_property)) >= 0) {
-			adr[i].space = rp[i].space;
-			adr[i].address = rp[i].address
-				+ (adr[i].space? 0: _ISA_MEM_BASE);
-			adr[i].size = rp[i].size;
-			++i;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / (2 * sizeof(int));
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = *ip++;
-		}
-	}
-
-	return mem_start;
-}
-
-static unsigned long __init
-interpret_root_props(struct device_node *np, unsigned long mem_start,
-		     int naddrc, int nsizec)
-{
-	struct address_range *adr;
-	int i, l, *ip;
-	unsigned int *rp;
-	int rpsize = (naddrc + nsizec) * sizeof(unsigned int);
-
-	rp = (unsigned int *) get_property(np, "reg", &l);
-	if (rp != 0 && l >= rpsize) {
-		i = 0;
-		adr = (struct address_range *) mem_start;
-		while ((l -= rpsize) >= 0) {
-			adr[i].space = (naddrc >= 2? rp[naddrc-2]: 2);
-			adr[i].address = rp[naddrc - 1];
-			adr[i].size = rp[naddrc + nsizec - 1];
-			++i;
-			rp += naddrc + nsizec;
-		}
-		np->addrs = adr;
-		np->n_addrs = i;
-		mem_start += i * sizeof(struct address_range);
-	}
-
-	if (use_of_interrupt_tree)
-		return mem_start;
-
-	ip = (int *) get_property(np, "AAPL,interrupts", &l);
-	if (ip == 0)
-		ip = (int *) get_property(np, "interrupts", &l);
-	if (ip != 0) {
-		np->intrs = (struct interrupt_info *) mem_start;
-		np->n_intrs = l / sizeof(int);
-		mem_start += np->n_intrs * sizeof(struct interrupt_info);
-		for (i = 0; i < np->n_intrs; ++i) {
-			np->intrs[i].line = *ip++;
-			np->intrs[i].sense = 1;
-		}
-	}
-
-	return mem_start;
-}
-
-/*
- * Work out the sense (active-low level / active-high edge)
- * of each interrupt from the device tree.
- */
-void __init
-prom_get_irq_senses(unsigned char *senses, int off, int max)
-{
-	struct device_node *np;
-	int i, j;
-
-	/* default to level-triggered */
-	memset(senses, 1, max - off);
-	if (!use_of_interrupt_tree)
-		return;
-
-	for (np = allnodes; np != 0; np = np->allnext) {
-		for (j = 0; j < np->n_intrs; j++) {
-			i = np->intrs[j].line;
-			if (i >= off && i < max) {
-				if (np->intrs[j].sense == 1)
-					senses[i-off] = (IRQ_SENSE_LEVEL
-						| IRQ_POLARITY_NEGATIVE);
-				else
-					senses[i-off] = (IRQ_SENSE_EDGE
-						| IRQ_POLARITY_POSITIVE);
-			}
-		}
-	}
-}
-
-/*
- * Construct and return a list of the device_nodes with a given name.
- */
-struct device_node *
-find_devices(const char *name)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->name != 0 && strcasecmp(np->name, name) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type.
- */
-struct device_node *
-find_type_devices(const char *type)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (np->type != 0 && strcasecmp(np->type, type) == 0) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Returns all nodes linked together
- */
-struct device_node *
-find_all_nodes(void)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		*prevp = np;
-		prevp = &np->next;
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/* Checks if the given "compat" string matches one of the strings in
- * the device's "compatible" property
- */
-int
-device_is_compatible(struct device_node *device, const char *compat)
-{
-	const char* cp;
-	int cplen, l;
-
-	cp = (char *) get_property(device, "compatible", &cplen);
-	if (cp == NULL)
-		return 0;
-	while (cplen > 0) {
-		if (strncasecmp(cp, compat, strlen(compat)) == 0)
-			return 1;
-		l = strlen(cp) + 1;
-		cp += l;
-		cplen -= l;
-	}
-
-	return 0;
-}
-
-
-/*
- * Indicates whether the root node has a given value in its
- * compatible property.
- */
-int
-machine_is_compatible(const char *compat)
-{
-	struct device_node *root;
-
-	root = find_path_device("/");
-	if (root == 0)
-		return 0;
-	return device_is_compatible(root, compat);
-}
-
-/*
- * Construct and return a list of the device_nodes with a given type
- * and compatible property.
- */
-struct device_node *
-find_compatible_devices(const char *type, const char *compat)
-{
-	struct device_node *head, **prevp, *np;
-
-	prevp = &head;
-	for (np = allnodes; np != 0; np = np->allnext) {
-		if (type != NULL
-		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
-			continue;
-		if (device_is_compatible(np, compat)) {
-			*prevp = np;
-			prevp = &np->next;
-		}
-	}
-	*prevp = NULL;
-	return head;
-}
-
-/*
- * Find the device_node with a given full_name.
- */
-struct device_node *
-find_path_device(const char *path)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
-			return np;
-	return NULL;
-}
-
-/*******
- *
- * New implementation of the OF "find" APIs, return a refcounted
- * object, call of_node_put() when done. Currently, still lacks
- * locking as old implementation, this is beeing done for ppc64.
- *
- * Note that property management will need some locking as well,
- * this isn't dealt with yet
- *
- *******/
-
-/**
- *	of_find_node_by_name - Find a node by it's "name" property
- *	@from:	The node to start searching from or NULL, the node
- *		you pass will not be searched, only the next one
- *		will; typically, you pass what the previous call
- *		returned. of_node_put() will be called on it
- *	@name:	The name string to match against
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_name(struct device_node *from,
-	const char *name)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->name != 0 && strcasecmp(np->name, name) == 0)
-			break;
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_node_by_type - Find a node by it's "device_type" property
- *	@from:	The node to start searching from or NULL, the node
- *		you pass will not be searched, only the next one
- *		will; typically, you pass what the previous call
- *		returned. of_node_put() will be called on it
- *	@name:	The type string to match against
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_type(struct device_node *from,
-	const char *type)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->type != 0 && strcasecmp(np->type, type) == 0)
-			break;
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_compatible_node - Find a node based on type and one of the
- *                                tokens in it's "compatible" property
- *	@from:		The node to start searching from or NULL, the node
- *			you pass will not be searched, only the next one
- *			will; typically, you pass what the previous call
- *			returned. of_node_put() will be called on it
- *	@type:		The type string to match "device_type" or NULL to ignore
- *	@compatible:	The string to match to one of the tokens in the device
- *			"compatible" list.
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_compatible_node(struct device_node *from,
-	const char *type, const char *compatible)
-{
-	struct device_node *np = from ? from->allnext : allnodes;
-
-	for (; np != 0; np = np->allnext) {
-		if (type != NULL
-		    && !(np->type != 0 && strcasecmp(np->type, type) == 0))
-			continue;
-		if (device_is_compatible(np, compatible))
-			break;
-	}
-	if (from)
-		of_node_put(from);
-	return of_node_get(np);
-}
-
-/**
- *	of_find_node_by_path - Find a node matching a full OF path
- *	@path:	The full path to match
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_node_by_path(const char *path)
-{
-	struct device_node *np = allnodes;
-
-	for (; np != 0; np = np->allnext)
-		if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0)
-			break;
-	return of_node_get(np);
-}
-
-/**
- *	of_find_all_nodes - Get next node in global list
- *	@prev:	Previous node or NULL to start iteration
- *		of_node_put() will be called on it
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_find_all_nodes(struct device_node *prev)
-{
-	return of_node_get(prev ? prev->allnext : allnodes);
-}
-
-/**
- *	of_get_parent - Get a node's parent if any
- *	@node:	Node to get parent
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_get_parent(const struct device_node *node)
-{
-	return node ? of_node_get(node->parent) : NULL;
-}
-
-/**
- *	of_get_next_child - Iterate a node childs
- *	@node:	parent node
- *	@prev:	previous child of the parent node, or NULL to get first
- *
- *	Returns a node pointer with refcount incremented, use
- *	of_node_put() on it when done.
- */
-struct device_node *of_get_next_child(const struct device_node *node,
-				      struct device_node *prev)
-{
-	struct device_node *next = prev ? prev->sibling : node->child;
-
-	for (; next != 0; next = next->sibling)
-		if (of_node_get(next))
-			break;
-	if (prev)
-		of_node_put(prev);
-	return next;
-}
-
-/**
- *	of_node_get - Increment refcount of a node
- *	@node:	Node to inc refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Returns the node itself or NULL if gone. Current implementation
- *	does nothing as we don't yet do dynamic node allocation on ppc32
- */
-struct device_node *of_node_get(struct device_node *node)
-{
-	return node;
-}
-
-/**
- *	of_node_put - Decrement refcount of a node
- *	@node:	Node to dec refcount, NULL is supported to
- *		simplify writing of callers
- *
- *	Current implementation does nothing as we don't yet do dynamic node
- *	allocation on ppc32
- */
-void  of_node_put(struct device_node *node)
-{
-}
-
-/*
- * Find the device_node with a given phandle.
- */
-static struct device_node * __init
-find_phandle(phandle ph)
-{
-	struct device_node *np;
-
-	for (np = allnodes; np != 0; np = np->allnext)
-		if (np->node == ph)
-			return np;
-	return NULL;
-}
-
-/*
- * Find a property with a given name for a given node
- * and return the value.
- */
-unsigned char *
-get_property(struct device_node *np, const char *name, int *lenp)
-{
-	struct property *pp;
-
-	for (pp = np->properties; pp != 0; pp = pp->next)
-		if (pp->name != NULL && strcmp(pp->name, name) == 0) {
-			if (lenp != 0)
-				*lenp = pp->length;
-			return pp->value;
-		}
-	return NULL;
-}
-
-/*
- * Add a property to a node
- */
-int
-prom_add_property(struct device_node* np, struct property* prop)
-{
-	struct property **next = &np->properties;
-
-	prop->next = NULL;
-	while (*next)
-		next = &(*next)->next;
-	*next = prop;
-
-	return 0;
-}
-
-/* I quickly hacked that one, check against spec ! */
-static inline unsigned long
-bus_space_to_resource_flags(unsigned int bus_space)
-{
-	u8 space = (bus_space >> 24) & 0xf;
-	if (space == 0)
-		space = 0x02;
-	if (space == 0x02)
-		return IORESOURCE_MEM;
-	else if (space == 0x01)
-		return IORESOURCE_IO;
-	else {
-		printk(KERN_WARNING "prom.c: bus_space_to_resource_flags(), space: %x\n",
-		    	bus_space);
-		return 0;
-	}
-}
-
-static struct resource*
-find_parent_pci_resource(struct pci_dev* pdev, struct address_range *range)
-{
-	unsigned long mask;
-	int i;
-
-	/* Check this one */
-	mask = bus_space_to_resource_flags(range->space);
-	for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
-		if ((pdev->resource[i].flags & mask) == mask &&
-			pdev->resource[i].start <= range->address &&
-			pdev->resource[i].end > range->address) {
-				if ((range->address + range->size - 1) > pdev->resource[i].end) {
-					/* Add better message */
-					printk(KERN_WARNING "PCI/OF resource overlap !\n");
-					return NULL;
-				}
-				break;
-			}
-	}
-	if (i == DEVICE_COUNT_RESOURCE)
-		return NULL;
-	return &pdev->resource[i];
-}
-
-/*
- * Request an OF device resource. Currently handles child of PCI devices,
- * or other nodes attached to the root node. Ultimately, put some
- * link to resources in the OF node.
- */
-struct resource*
-request_OF_resource(struct device_node* node, int index, const char* name_postfix)
-{
-	struct pci_dev* pcidev;
-	u8 pci_bus, pci_devfn;
-	unsigned long iomask;
-	struct device_node* nd;
-	struct resource* parent;
-	struct resource *res = NULL;
-	int nlen, plen;
-
-	if (index >= node->n_addrs)
-		goto fail;
-
-	/* Sanity check on bus space */
-	iomask = bus_space_to_resource_flags(node->addrs[index].space);
-	if (iomask & IORESOURCE_MEM)
-		parent = &iomem_resource;
-	else if (iomask & IORESOURCE_IO)
-		parent = &ioport_resource;
-	else
-		goto fail;
-
-	/* Find a PCI parent if any */
-	nd = node;
-	pcidev = NULL;
-	while(nd) {
-		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
-			pcidev = pci_find_slot(pci_bus, pci_devfn);
-		if (pcidev) break;
-		nd = nd->parent;
-	}
-	if (pcidev)
-		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
-	if (!parent) {
-		printk(KERN_WARNING "request_OF_resource(%s), parent not found\n",
-			node->name);
-		goto fail;
-	}
-
-	res = __request_region(parent, node->addrs[index].address, node->addrs[index].size, NULL);
-	if (!res)
-		goto fail;
-	nlen = strlen(node->name);
-	plen = name_postfix ? strlen(name_postfix) : 0;
-	res->name = (const char *)kmalloc(nlen+plen+1, GFP_KERNEL);
-	if (res->name) {
-		strcpy((char *)res->name, node->name);
-		if (plen)
-			strcpy((char *)res->name+nlen, name_postfix);
-	}
-	return res;
-fail:
-	return NULL;
-}
-
-int
-release_OF_resource(struct device_node* node, int index)
-{
-	struct pci_dev* pcidev;
-	u8 pci_bus, pci_devfn;
-	unsigned long iomask, start, end;
-	struct device_node* nd;
-	struct resource* parent;
-	struct resource *res = NULL;
-
-	if (index >= node->n_addrs)
-		return -EINVAL;
-
-	/* Sanity check on bus space */
-	iomask = bus_space_to_resource_flags(node->addrs[index].space);
-	if (iomask & IORESOURCE_MEM)
-		parent = &iomem_resource;
-	else if (iomask & IORESOURCE_IO)
-		parent = &ioport_resource;
-	else
-		return -EINVAL;
-
-	/* Find a PCI parent if any */
-	nd = node;
-	pcidev = NULL;
-	while(nd) {
-		if (!pci_device_from_OF_node(nd, &pci_bus, &pci_devfn))
-			pcidev = pci_find_slot(pci_bus, pci_devfn);
-		if (pcidev) break;
-		nd = nd->parent;
-	}
-	if (pcidev)
-		parent = find_parent_pci_resource(pcidev, &node->addrs[index]);
-	if (!parent) {
-		printk(KERN_WARNING "release_OF_resource(%s), parent not found\n",
-			node->name);
-		return -ENODEV;
-	}
-
-	/* Find us in the parent and its childs */
-	res = parent->child;
-	start = node->addrs[index].address;
-	end = start + node->addrs[index].size - 1;
-	while (res) {
-		if (res->start == start && res->end == end &&
-		    (res->flags & IORESOURCE_BUSY))
-		    	break;
-		if (res->start <= start && res->end >= end)
-			res = res->child;
-		else
-			res = res->sibling;
-	}
-	if (!res)
-		return -ENODEV;
-
-	kfree(res->name);
-	res->name = NULL;
-	release_resource(res);
-	kfree(res);
-
-	return 0;
-}
-
-#if 0
-void
-print_properties(struct device_node *np)
-{
-	struct property *pp;
-	char *cp;
-	int i, n;
-
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		printk(KERN_INFO "%s", pp->name);
-		for (i = strlen(pp->name); i < 16; ++i)
-			printk(" ");
-		cp = (char *) pp->value;
-		for (i = pp->length; i > 0; --i, ++cp)
-			if ((i > 1 && (*cp < 0x20 || *cp > 0x7e))
-			    || (i == 1 && *cp != 0))
-				break;
-		if (i == 0 && pp->length > 1) {
-			/* looks like a string */
-			printk(" %s\n", (char *) pp->value);
-		} else {
-			/* dump it in hex */
-			n = pp->length;
-			if (n > 64)
-				n = 64;
-			if (pp->length % 4 == 0) {
-				unsigned int *p = (unsigned int *) pp->value;
-
-				n /= 4;
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 4) == 0)
-						printk("\n                ");
-					printk(" %08x", *p++);
-				}
-			} else {
-				unsigned char *bp = pp->value;
-
-				for (i = 0; i < n; ++i) {
-					if (i != 0 && (i % 16) == 0)
-						printk("\n                ");
-					printk(" %02x", *bp++);
-				}
-			}
-			printk("\n");
-			if (pp->length > 64)
-				printk("                 ... (length = %d)\n",
-				       pp->length);
-		}
-	}
-}
-#endif
-
-static DEFINE_SPINLOCK(rtas_lock);
-
-/* this can be called after setup -- Cort */
-int
-call_rtas(const char *service, int nargs, int nret,
-	  unsigned long *outputs, ...)
-{
-	va_list list;
-	int i;
-	unsigned long s;
-	struct device_node *rtas;
-	int *tokp;
-	union {
-		unsigned long words[16];
-		double align;
-	} u;
-
-	rtas = find_devices("rtas");
-	if (rtas == NULL)
-		return -1;
-	tokp = (int *) get_property(rtas, service, NULL);
-	if (tokp == NULL) {
-		printk(KERN_ERR "No RTAS service called %s\n", service);
-		return -1;
-	}
-	u.words[0] = *tokp;
-	u.words[1] = nargs;
-	u.words[2] = nret;
-	va_start(list, outputs);
-	for (i = 0; i < nargs; ++i)
-		u.words[i+3] = va_arg(list, unsigned long);
-	va_end(list);
-
-	/*
-	 * RTAS doesn't use floating point.
-	 * Or at least, according to the CHRP spec we enter RTAS
-	 * with FP disabled, and it doesn't change the FP registers.
-	 *  -- paulus.
-	 */
-	spin_lock_irqsave(&rtas_lock, s);
-	enter_rtas((void *)__pa(&u));
-	spin_unlock_irqrestore(&rtas_lock, s);
-
-	if (nret > 1 && outputs != NULL)
-		for (i = 0; i < nret-1; ++i)
-			outputs[i] = u.words[i+nargs+4];
-	return u.words[nargs+3];
-}
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
deleted file mode 100644
index df14422ae1c6..000000000000
--- a/arch/ppc/syslib/prom_init.c
+++ /dev/null
@@ -1,1011 +0,0 @@
-/*
- * Note that prom_init() and anything called from prom_init()
- * may be running at an address that is different from the address
- * that it was linked at.  References to static data items are
- * handled by compiling this file with -mrelocatable-lib.
- */
-
-#include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/bitops.h>
-
-#include <asm/sections.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/system.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/btext.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/cacheflush.h>
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
-#include <linux/linux_logo.h>
-extern const struct linux_logo logo_linux_clut224;
-#endif
-
-/*
- * Properties whose value is longer than this get excluded from our
- * copy of the device tree.  This way we don't waste space storing
- * things like "driver,AAPL,MacOS,PowerPC" properties.  But this value
- * does need to be big enough to ensure that we don't lose things
- * like the interrupt-map property on a PCI-PCI bridge.
- */
-#define MAX_PROPERTY_LENGTH	4096
-
-#ifndef FB_MAX			/* avoid pulling in all of the fb stuff */
-#define FB_MAX	8
-#endif
-
-#define ALIGNUL(x) (((x) + sizeof(unsigned long)-1) & -sizeof(unsigned long))
-
-typedef u32 prom_arg_t;
-
-struct prom_args {
-	const char *service;
-	int nargs;
-	int nret;
-	prom_arg_t args[10];
-};
-
-struct pci_address {
-	unsigned a_hi;
-	unsigned a_mid;
-	unsigned a_lo;
-};
-
-struct pci_reg_property {
-	struct pci_address addr;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct pci_range {
-	struct pci_address addr;
-	unsigned phys;
-	unsigned size_hi;
-	unsigned size_lo;
-};
-
-struct isa_reg_property {
-	unsigned space;
-	unsigned address;
-	unsigned size;
-};
-
-struct pci_intr_map {
-	struct pci_address addr;
-	unsigned dunno;
-	phandle int_ctrler;
-	unsigned intr;
-};
-
-static void prom_exit(void);
-static int  call_prom(const char *service, int nargs, int nret, ...);
-static int  call_prom_ret(const char *service, int nargs, int nret,
-			  prom_arg_t *rets, ...);
-static void prom_print_hex(unsigned int v);
-static int  prom_set_color(ihandle ih, int i, int r, int g, int b);
-static int  prom_next_node(phandle *nodep);
-static unsigned long check_display(unsigned long mem);
-static void setup_disp_fake_bi(ihandle dp);
-static unsigned long copy_device_tree(unsigned long mem_start,
-				unsigned long mem_end);
-static unsigned long inspect_node(phandle node, struct device_node *dad,
-				unsigned long mem_start, unsigned long mem_end,
-				struct device_node ***allnextpp);
-static void prom_hold_cpus(unsigned long mem);
-static void prom_instantiate_rtas(void);
-static void * early_get_property(unsigned long base, unsigned long node,
-				char *prop);
-
-prom_entry prom __initdata;
-ihandle prom_chosen __initdata;
-ihandle prom_stdout __initdata;
-
-static char *prom_display_paths[FB_MAX] __initdata;
-static phandle prom_display_nodes[FB_MAX] __initdata;
-static unsigned int prom_num_displays __initdata;
-static ihandle prom_disp_node __initdata;
-char *of_stdout_device __initdata;
-
-unsigned int rtas_data;   /* physical pointer */
-unsigned int rtas_entry;  /* physical pointer */
-unsigned int rtas_size;
-unsigned int old_rtas;
-
-boot_infos_t *boot_infos;
-char *bootpath;
-char *bootdevice;
-struct device_node *allnodes;
-
-extern char *klimit;
-
-static void __init
-prom_exit(void)
-{
-	struct prom_args args;
-
-	args.service = "exit";
-	args.nargs = 0;
-	args.nret = 0;
-	prom(&args);
-	for (;;)			/* should never get here */
-		;
-}
-
-static int __init
-call_prom(const char *service, int nargs, int nret, ...)
-{
-	va_list list;
-	int i;
-	struct prom_args prom_args;
-
-	prom_args.service = service;
-	prom_args.nargs = nargs;
-	prom_args.nret = nret;
-	va_start(list, nret);
-	for (i = 0; i < nargs; ++i)
-		prom_args.args[i] = va_arg(list, prom_arg_t);
-	va_end(list);
-	for (i = 0; i < nret; ++i)
-		prom_args.args[i + nargs] = 0;
-	prom(&prom_args);
-	return prom_args.args[nargs];
-}
-
-static int __init
-call_prom_ret(const char *service, int nargs, int nret, prom_arg_t *rets, ...)
-{
-	va_list list;
-	int i;
-	struct prom_args prom_args;
-
-	prom_args.service = service;
-	prom_args.nargs = nargs;
-	prom_args.nret = nret;
-	va_start(list, rets);
-	for (i = 0; i < nargs; ++i)
-		prom_args.args[i] = va_arg(list, int);
-	va_end(list);
-	for (i = 0; i < nret; ++i)
-		prom_args.args[i + nargs] = 0;
-	prom(&prom_args);
-	for (i = 1; i < nret; ++i)
-		rets[i-1] = prom_args.args[nargs + i];
-	return prom_args.args[nargs];
-}
-
-void __init
-prom_print(const char *msg)
-{
-	const char *p, *q;
-
-	if (prom_stdout == 0)
-		return;
-
-	for (p = msg; *p != 0; p = q) {
-		for (q = p; *q != 0 && *q != '\n'; ++q)
-			;
-		if (q > p)
-			call_prom("write", 3, 1, prom_stdout, p, q - p);
-		if (*q != 0) {
-			++q;
-			call_prom("write", 3, 1, prom_stdout, "\r\n", 2);
-		}
-	}
-}
-
-static void __init
-prom_print_hex(unsigned int v)
-{
-	char buf[16];
-	int i, c;
-
-	for (i = 0; i < 8; ++i) {
-		c = (v >> ((7-i)*4)) & 0xf;
-		c += (c >= 10)? ('a' - 10): '0';
-		buf[i] = c;
-	}
-	buf[i] = ' ';
-	buf[i+1] = 0;
-	prom_print(buf);
-}
-
-static int __init
-prom_set_color(ihandle ih, int i, int r, int g, int b)
-{
-	return call_prom("call-method", 6, 1, "color!", ih, i, b, g, r);
-}
-
-static int __init
-prom_next_node(phandle *nodep)
-{
-	phandle node;
-
-	if ((node = *nodep) != 0
-	    && (*nodep = call_prom("child", 1, 1, node)) != 0)
-		return 1;
-	if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
-		return 1;
-	for (;;) {
-		if ((node = call_prom("parent", 1, 1, node)) == 0)
-			return 0;
-		if ((*nodep = call_prom("peer", 1, 1, node)) != 0)
-			return 1;
-	}
-}
-
-#ifdef CONFIG_POWER4
-/*
- * Set up a hash table with a set of entries in it to map the
- * first 64MB of RAM.  This is used on 64-bit machines since
- * some of them don't have BATs.
- */
-
-static inline void make_pte(unsigned long htab, unsigned int hsize,
-			    unsigned int va, unsigned int pa, int mode)
-{
-	unsigned int *pteg;
-	unsigned int hash, i, vsid;
-
-	vsid = ((va >> 28) * 0x111) << 12;
-	hash = ((va ^ vsid) >> 5) & 0x7fff80;
-	pteg = (unsigned int *)(htab + (hash & (hsize - 1)));
-	for (i = 0; i < 8; ++i, pteg += 4) {
-		if ((pteg[1] & 1) == 0) {
-			pteg[1] = vsid | ((va >> 16) & 0xf80) | 1;
-			pteg[3] = pa | mode;
-			break;
-		}
-	}
-}
-
-extern unsigned long _SDR1;
-extern PTE *Hash;
-extern unsigned long Hash_size;
-
-static void __init
-prom_alloc_htab(void)
-{
-	unsigned int hsize;
-	unsigned long htab;
-	unsigned int addr;
-
-	/*
-	 * Because of OF bugs we can't use the "claim" client
-	 * interface to allocate memory for the hash table.
-	 * This code is only used on 64-bit PPCs, and the only
-	 * 64-bit PPCs at the moment are RS/6000s, and their
-	 * OF is based at 0xc00000 (the 12M point), so we just
-	 * arbitrarily use the 0x800000 - 0xc00000 region for the
-	 * hash table.
-	 *  -- paulus.
-	 */
-	hsize = 4 << 20;	/* POWER4 has no BATs */
-	htab = (8 << 20);
-	call_prom("claim", 3, 1, htab, hsize, 0);
-	Hash = (void *)(htab + KERNELBASE);
-	Hash_size = hsize;
-	_SDR1 = htab + __ilog2(hsize) - 18;
-
-	/*
-	 * Put in PTEs for the first 64MB of RAM
-	 */
-	memset((void *)htab, 0, hsize);
-	for (addr = 0; addr < 0x4000000; addr += 0x1000)
-		make_pte(htab, hsize, addr + KERNELBASE, addr,
-			 _PAGE_ACCESSED | _PAGE_COHERENT | PP_RWXX);
-#if 0 /* DEBUG stuff mapping the SCC */
-	make_pte(htab, hsize, 0x80013000, 0x80013000,
-		 _PAGE_ACCESSED | _PAGE_NO_CACHE | _PAGE_GUARDED | PP_RWXX);
-#endif
-}
-#endif /* CONFIG_POWER4 */
-
-
-/*
- * If we have a display that we don't know how to drive,
- * we will want to try to execute OF's open method for it
- * later.  However, OF will probably fall over if we do that
- * we've taken over the MMU.
- * So we check whether we will need to open the display,
- * and if so, open it now.
- */
-static unsigned long __init
-check_display(unsigned long mem)
-{
-	phandle node;
-	ihandle ih;
-	int i, j;
-	char type[16], *path;
-	static unsigned char default_colors[] = {
-		0x00, 0x00, 0x00,
-		0x00, 0x00, 0xaa,
-		0x00, 0xaa, 0x00,
-		0x00, 0xaa, 0xaa,
-		0xaa, 0x00, 0x00,
-		0xaa, 0x00, 0xaa,
-		0xaa, 0xaa, 0x00,
-		0xaa, 0xaa, 0xaa,
-		0x55, 0x55, 0x55,
-		0x55, 0x55, 0xff,
-		0x55, 0xff, 0x55,
-		0x55, 0xff, 0xff,
-		0xff, 0x55, 0x55,
-		0xff, 0x55, 0xff,
-		0xff, 0xff, 0x55,
-		0xff, 0xff, 0xff
-	};
-	const unsigned char *clut;
-
-	prom_disp_node = 0;
-
-	for (node = 0; prom_next_node(&node); ) {
-		type[0] = 0;
-		call_prom("getprop", 4, 1, node, "device_type",
-			  type, sizeof(type));
-		if (strcmp(type, "display") != 0)
-			continue;
-		/* It seems OF doesn't null-terminate the path :-( */
-		path = (char *) mem;
-		memset(path, 0, 256);
-		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
-			continue;
-
-		/*
-		 * If this display is the device that OF is using for stdout,
-		 * move it to the front of the list.
-		 */
-		mem += strlen(path) + 1;
-		i = prom_num_displays++;
-		if (of_stdout_device != 0 && i > 0
-		    && strcmp(of_stdout_device, path) == 0) {
-			for (; i > 0; --i) {
-				prom_display_paths[i]
-					= prom_display_paths[i-1];
-				prom_display_nodes[i]
-					= prom_display_nodes[i-1];
-			}
-		}
-		prom_display_paths[i] = path;
-		prom_display_nodes[i] = node;
-		if (i == 0)
-			prom_disp_node = node;
-		if (prom_num_displays >= FB_MAX)
-			break;
-	}
-
-	for (j=0; j<prom_num_displays; j++) {
-		path = prom_display_paths[j];
-		node = prom_display_nodes[j];
-		prom_print("opening display ");
-		prom_print(path);
-		ih = call_prom("open", 1, 1, path);
-		if (ih == 0 || ih == (ihandle) -1) {
-			prom_print("... failed\n");
-			for (i=j+1; i<prom_num_displays; i++) {
-				prom_display_paths[i-1] = prom_display_paths[i];
-				prom_display_nodes[i-1] = prom_display_nodes[i];
-			}
-			if (--prom_num_displays > 0) {
-				prom_disp_node = prom_display_nodes[j];
-				j--;
-			} else
-				prom_disp_node = 0;
-			continue;
-		} else {
-			prom_print("... ok\n");
-			call_prom("setprop", 4, 1, node, "linux,opened", 0, 0);
-
-			/*
-			 * Setup a usable color table when the appropriate
-			 * method is available.
-			 * Should update this to use set-colors.
-			 */
-			clut = default_colors;
-			for (i = 0; i < 32; i++, clut += 3)
-				if (prom_set_color(ih, i, clut[0], clut[1],
-						   clut[2]) != 0)
-					break;
-
-#ifdef CONFIG_LOGO_LINUX_CLUT224
-			clut = PTRRELOC(logo_linux_clut224.clut);
-			for (i = 0; i < logo_linux_clut224.clutsize;
-			     i++, clut += 3)
-				if (prom_set_color(ih, i + 32, clut[0],
-						   clut[1], clut[2]) != 0)
-					break;
-#endif /* CONFIG_LOGO_LINUX_CLUT224 */
-		}
-	}
-	
-	if (prom_stdout) {
-		phandle p;
-		p = call_prom("instance-to-package", 1, 1, prom_stdout);
-		if (p && p != -1) {
-			type[0] = 0;
-			call_prom("getprop", 4, 1, p, "device_type",
-				  type, sizeof(type));
-			if (strcmp(type, "display") == 0)
-				call_prom("setprop", 4, 1, p, "linux,boot-display",
-					  0, 0);
-		}
-	}
-
-	return ALIGNUL(mem);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-static void __init
-setup_disp_fake_bi(ihandle dp)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	int width = 640, height = 480, depth = 8, pitch;
-	unsigned address;
-	struct pci_reg_property addrs[8];
-	int i, naddrs;
-	char name[32];
-	char *getprop = "getprop";
-
-	prom_print("Initializing fake screen: ");
-
-	memset(name, 0, sizeof(name));
-	call_prom(getprop, 4, 1, dp, "name", name, sizeof(name));
-	name[sizeof(name)-1] = 0;
-	prom_print(name);
-	prom_print("\n");
-	call_prom(getprop, 4, 1, dp, "width", &width, sizeof(width));
-	call_prom(getprop, 4, 1, dp, "height", &height, sizeof(height));
-	call_prom(getprop, 4, 1, dp, "depth", &depth, sizeof(depth));
-	pitch = width * ((depth + 7) / 8);
-	call_prom(getprop, 4, 1, dp, "linebytes",
-		  &pitch, sizeof(pitch));
-	if (pitch == 1)
-		pitch = 0x1000;		/* for strange IBM display */
-	address = 0;
-	call_prom(getprop, 4, 1, dp, "address",
-		  &address, sizeof(address));
-	if (address == 0) {
-		/* look for an assigned address with a size of >= 1MB */
-		naddrs = call_prom(getprop, 4, 1, dp, "assigned-addresses",
-				   addrs, sizeof(addrs));
-		naddrs /= sizeof(struct pci_reg_property);
-		for (i = 0; i < naddrs; ++i) {
-			if (addrs[i].size_lo >= (1 << 20)) {
-				address = addrs[i].addr.a_lo;
-				/* use the BE aperture if possible */
-				if (addrs[i].size_lo >= (16 << 20))
-					address += (8 << 20);
-				break;
-			}
-		}
-		if (address == 0) {
-			prom_print("Failed to get address\n");
-			return;
-		}
-	}
-	/* kludge for valkyrie */
-	if (strcmp(name, "valkyrie") == 0)
-		address += 0x1000;
-
-#ifdef CONFIG_POWER4
-#if CONFIG_TASK_SIZE > 0x80000000
-#error CONFIG_TASK_SIZE cannot be above 0x80000000 with BOOTX_TEXT on G5
-#endif
-	{
-		extern boot_infos_t disp_bi;
-		unsigned long va, pa, i, offset;
-       		va = 0x90000000;
-		pa = address & 0xfffff000ul;
-		offset = address & 0x00000fff;
-
-		for (i=0; i<0x4000; i++) {  
-			make_pte((unsigned long)Hash - KERNELBASE, Hash_size, va, pa, 
-				 _PAGE_ACCESSED | _PAGE_NO_CACHE |
-				 _PAGE_GUARDED | PP_RWXX);
-			va += 0x1000;
-			pa += 0x1000;
-		}
-		btext_setup_display(width, height, depth, pitch, 0x90000000 | offset);
-		disp_bi.dispDeviceBase = (u8 *)address;
-	}
-#else /* CONFIG_POWER4 */
-	btext_setup_display(width, height, depth, pitch, address);
-	btext_prepare_BAT();
-#endif /* CONFIG_POWER4 */
-#endif /* CONFIG_BOOTX_TEXT */
-}
-
-/*
- * Make a copy of the device tree from the PROM.
- */
-static unsigned long __init
-copy_device_tree(unsigned long mem_start, unsigned long mem_end)
-{
-	phandle root;
-	unsigned long new_start;
-	struct device_node **allnextp;
-
-	root = call_prom("peer", 1, 1, (phandle)0);
-	if (root == (phandle)0) {
-		prom_print("couldn't get device tree root\n");
-		prom_exit();
-	}
-	allnextp = &allnodes;
-	mem_start = ALIGNUL(mem_start);
-	new_start = inspect_node(root, NULL, mem_start, mem_end, &allnextp);
-	*allnextp = NULL;
-	return new_start;
-}
-
-static unsigned long __init
-inspect_node(phandle node, struct device_node *dad,
-	     unsigned long mem_start, unsigned long mem_end,
-	     struct device_node ***allnextpp)
-{
-	int l;
-	phandle child;
-	struct device_node *np;
-	struct property *pp, **prev_propp;
-	char *prev_name, *namep;
-	unsigned char *valp;
-
-	np = (struct device_node *) mem_start;
-	mem_start += sizeof(struct device_node);
-	memset(np, 0, sizeof(*np));
-	np->node = node;
-	**allnextpp = PTRUNRELOC(np);
-	*allnextpp = &np->allnext;
-	if (dad != 0) {
-		np->parent = PTRUNRELOC(dad);
-		/* we temporarily use the `next' field as `last_child'. */
-		if (dad->next == 0)
-			dad->child = PTRUNRELOC(np);
-		else
-			dad->next->sibling = PTRUNRELOC(np);
-		dad->next = np;
-	}
-
-	/* get and store all properties */
-	prev_propp = &np->properties;
-	prev_name = "";
-	for (;;) {
-		pp = (struct property *) mem_start;
-		namep = (char *) (pp + 1);
-		pp->name = PTRUNRELOC(namep);
-		if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0)
-			break;
-		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
-		prev_name = namep;
-		valp = (unsigned char *) mem_start;
-		pp->value = PTRUNRELOC(valp);
-		pp->length = call_prom("getprop", 4, 1, node, namep,
-				       valp, mem_end - mem_start);
-		if (pp->length < 0)
-			continue;
-#ifdef MAX_PROPERTY_LENGTH
-		if (pp->length > MAX_PROPERTY_LENGTH)
-			continue; /* ignore this property */
-#endif
-		mem_start = ALIGNUL(mem_start + pp->length);
-		*prev_propp = PTRUNRELOC(pp);
-		prev_propp = &pp->next;
-	}
-	if (np->node != 0) {
-		/* Add a "linux,phandle" property" */
-		pp = (struct property *) mem_start;
-		*prev_propp = PTRUNRELOC(pp);
-		prev_propp = &pp->next;
-		namep = (char *) (pp + 1);
-		pp->name = PTRUNRELOC(namep);
-		strcpy(namep, "linux,phandle");
-		mem_start = ALIGNUL((unsigned long)namep + strlen(namep) + 1);
-		pp->value = (unsigned char *) PTRUNRELOC(&np->node);
-		pp->length = sizeof(np->node);
-	}
-	*prev_propp = NULL;
-
-	/* get the node's full name */
-	l = call_prom("package-to-path", 3, 1, node,
-		      mem_start, mem_end - mem_start);
-	if (l >= 0) {
-		char *p, *ep;
-
-		np->full_name = PTRUNRELOC((char *) mem_start);
-		*(char *)(mem_start + l) = 0;
-		/* Fixup an Apple bug where they have bogus \0 chars in the
-		 * middle of the path in some properties
-		 */
-		for (p = (char *)mem_start, ep = p + l; p < ep; p++)
-			if ((*p) == '\0') {
-				memmove(p, p+1, ep - p);
-				ep--;
-			}
-		mem_start = ALIGNUL(mem_start + l + 1);
-	}
-
-	/* do all our children */
-	child = call_prom("child", 1, 1, node);
-	while (child != 0) {
-		mem_start = inspect_node(child, np, mem_start, mem_end,
-					 allnextpp);
-		child = call_prom("peer", 1, 1, child);
-	}
-
-	return mem_start;
-}
-
-unsigned long smp_chrp_cpu_nr __initdata = 0;
-
-/*
- * With CHRP SMP we need to use the OF to start the other
- * processors so we can't wait until smp_boot_cpus (the OF is
- * trashed by then) so we have to put the processors into
- * a holding pattern controlled by the kernel (not OF) before
- * we destroy the OF.
- *
- * This uses a chunk of high memory, puts some holding pattern
- * code there and sends the other processors off to there until
- * smp_boot_cpus tells them to do something.  We do that by using
- * physical address 0x0.  The holding pattern checks that address
- * until its cpu # is there, when it is that cpu jumps to
- * __secondary_start().  smp_boot_cpus() takes care of setting those
- * values.
- *
- * We also use physical address 0x4 here to tell when a cpu
- * is in its holding pattern code.
- *
- * -- Cort
- *
- * Note that we have to do this if we have more than one CPU,
- * even if this is a UP kernel.  Otherwise when we trash OF
- * the other CPUs will start executing some random instructions
- * and crash the system.  -- paulus
- */
-static void __init
-prom_hold_cpus(unsigned long mem)
-{
-	extern void __secondary_hold(void);
-	unsigned long i;
-	int cpu;
-	phandle node;
-	char type[16], *path;
-	unsigned int reg;
-
-	/*
-	 * XXX: hack to make sure we're chrp, assume that if we're
-	 *      chrp we have a device_type property -- Cort
-	 */
-	node = call_prom("finddevice", 1, 1, "/");
-	if (call_prom("getprop", 4, 1, node,
-		      "device_type", type, sizeof(type)) <= 0)
-		return;
-
-	/* copy the holding pattern code to someplace safe (0) */
-	/* the holding pattern is now within the first 0x100
-	   bytes of the kernel image -- paulus */
-	memcpy((void *)0, _stext, 0x100);
-	flush_icache_range(0, 0x100);
-
-	/* look for cpus */
-	*(unsigned long *)(0x0) = 0;
-	asm volatile("dcbf 0,%0": : "r" (0) : "memory");
-	for (node = 0; prom_next_node(&node); ) {
-		type[0] = 0;
-		call_prom("getprop", 4, 1, node, "device_type",
-			  type, sizeof(type));
-		if (strcmp(type, "cpu") != 0)
-			continue;
-		path = (char *) mem;
-		memset(path, 0, 256);
-		if (call_prom("package-to-path", 3, 1, node, path, 255) < 0)
-			continue;
-		reg = -1;
-		call_prom("getprop", 4, 1, node, "reg", &reg, sizeof(reg));
-		cpu = smp_chrp_cpu_nr++;
-#ifdef CONFIG_SMP
-		smp_hw_index[cpu] = reg;
-#endif /* CONFIG_SMP */
-		/* XXX: hack - don't start cpu 0, this cpu -- Cort */
-		if (cpu == 0)
-			continue;
-		prom_print("starting cpu ");
-		prom_print(path);
-		*(ulong *)(0x4) = 0;
-		call_prom("start-cpu", 3, 0, node,
-			  (char *)__secondary_hold - _stext, cpu);
-		prom_print("...");
-		for ( i = 0 ; (i < 10000) && (*(ulong *)(0x4) == 0); i++ )
-			;
-		if (*(ulong *)(0x4) == cpu)
-			prom_print("ok\n");
-		else {
-			prom_print("failed: ");
-			prom_print_hex(*(ulong *)0x4);
-			prom_print("\n");
-		}
-	}
-}
-
-static void __init
-prom_instantiate_rtas(void)
-{
-	ihandle prom_rtas;
-	prom_arg_t result;
-
-	prom_rtas = call_prom("finddevice", 1, 1, "/rtas");
-	if (prom_rtas == -1)
-		return;
-
-	rtas_size = 0;
-	call_prom("getprop", 4, 1, prom_rtas,
-		  "rtas-size", &rtas_size, sizeof(rtas_size));
-	prom_print("instantiating rtas");
-	if (rtas_size == 0) {
-		rtas_data = 0;
-	} else {
-		/*
-		 * Ask OF for some space for RTAS.
-		 * Actually OF has bugs so we just arbitrarily
-		 * use memory at the 6MB point.
-		 */
-		rtas_data = 6 << 20;
-		prom_print(" at ");
-		prom_print_hex(rtas_data);
-	}
-
-	prom_rtas = call_prom("open", 1, 1, "/rtas");
-	prom_print("...");
-	rtas_entry = 0;
-	if (call_prom_ret("call-method", 3, 2, &result,
-			  "instantiate-rtas", prom_rtas, rtas_data) == 0)
-		rtas_entry = result;
-	if ((rtas_entry == -1) || (rtas_entry == 0))
-		prom_print(" failed\n");
-	else
-		prom_print(" done\n");
-}
-
-/*
- * We enter here early on, when the Open Firmware prom is still
- * handling exceptions and the MMU hash table for us.
- */
-unsigned long __init
-prom_init(int r3, int r4, prom_entry pp)
-{
-	unsigned long mem;
-	ihandle prom_mmu;
-	unsigned long offset = reloc_offset();
-	int i, l;
-	char *p, *d;
- 	unsigned long phys;
-	prom_arg_t result[3];
-	char model[32];
-	phandle node;
-	int rc;
-
- 	/* Default */
- 	phys = (unsigned long) &_stext;
-
-	/* First get a handle for the stdout device */
-	prom = pp;
-	prom_chosen = call_prom("finddevice", 1, 1, "/chosen");
-	if (prom_chosen == -1)
-		prom_exit();
-	if (call_prom("getprop", 4, 1, prom_chosen, "stdout",
-		      &prom_stdout, sizeof(prom_stdout)) <= 0)
-		prom_exit();
-
-	/* Get the full OF pathname of the stdout device */
-	mem = (unsigned long) klimit + offset;
-	p = (char *) mem;
-	memset(p, 0, 256);
-	call_prom("instance-to-path", 3, 1, prom_stdout, p, 255);
-	of_stdout_device = p;
-	mem += strlen(p) + 1;
-
-	/* Get the boot device and translate it to a full OF pathname. */
-	p = (char *) mem;
-	l = call_prom("getprop", 4, 1, prom_chosen, "bootpath", p, 1<<20);
-	if (l > 0) {
-		p[l] = 0;	/* should already be null-terminated */
-		bootpath = PTRUNRELOC(p);
-		mem += l + 1;
-		d = (char *) mem;
-		*d = 0;
-		call_prom("canon", 3, 1, p, d, 1<<20);
-		bootdevice = PTRUNRELOC(d);
-		mem = ALIGNUL(mem + strlen(d) + 1);
-	}
-
-	prom_instantiate_rtas();
-
-#ifdef CONFIG_POWER4
-	/*
-	 * Find out how much memory we have and allocate a
-	 * suitably-sized hash table.
-	 */
-	prom_alloc_htab();
-#endif
-	mem = check_display(mem);
-
-	prom_print("copying OF device tree...");
-	mem = copy_device_tree(mem, mem + (1<<20));
-	prom_print("done\n");
-
-	prom_hold_cpus(mem);
-
-	klimit = (char *) (mem - offset);
-
-	node = call_prom("finddevice", 1, 1, "/");
-	rc = call_prom("getprop", 4, 1, node, "model", model, sizeof(model));
-	if (rc > 0 && !strncmp (model, "Pegasos", 7)
-		&& strncmp (model, "Pegasos2", 8)) {
-		/* Pegasos 1 has a broken translate method in the OF,
-		 * and furthermore the BATs are mapped 1:1 so the phys
-		 * address calculated above is correct, so let's use
-		 * it directly.
-		 */
-	} else if (offset == 0) {
-		/* If we are already running at 0xc0000000, we assume we were
-	 	 * loaded by an OF bootloader which did set a BAT for us.
-	 	 * This breaks OF translate so we force phys to be 0.
-	 	 */
-		prom_print("(already at 0xc0000000) phys=0\n");
-		phys = 0;
-	} else if (call_prom("getprop", 4, 1, prom_chosen, "mmu",
-			     &prom_mmu, sizeof(prom_mmu)) <= 0) {
-		prom_print(" no MMU found\n");
-	} else if (call_prom_ret("call-method", 4, 4, result, "translate",
-				 prom_mmu, &_stext, 1) != 0) {
-		prom_print(" (translate failed)\n");
-	} else {
-		/* We assume the phys. address size is 3 cells */
-		phys = result[2];
-	}
-
-	if (prom_disp_node != 0)
-		setup_disp_fake_bi(prom_disp_node);
-
-	/* Use quiesce call to get OF to shut down any devices it's using */
-	prom_print("Calling quiesce ...\n");
-	call_prom("quiesce", 0, 0);
-
-	/* Relocate various pointers which will be used once the
-	   kernel is running at the address it was linked at. */
-	for (i = 0; i < prom_num_displays; ++i)
-		prom_display_paths[i] = PTRUNRELOC(prom_display_paths[i]);
-
-#ifdef CONFIG_SERIAL_CORE_CONSOLE
-	/* Relocate the of stdout for console autodetection */
-	of_stdout_device = PTRUNRELOC(of_stdout_device);
-#endif
-
-	prom_print("returning 0x");
-	prom_print_hex(phys);
-	prom_print("from prom_init\n");
-	prom_stdout = 0;
-
-	return phys;
-}
-
-/*
- * early_get_property is used to access the device tree image prepared
- * by BootX very early on, before the pointers in it have been relocated.
- */
-static void * __init
-early_get_property(unsigned long base, unsigned long node, char *prop)
-{
-	struct device_node *np = (struct device_node *)(base + node);
-	struct property *pp;
-
-	for (pp = np->properties; pp != 0; pp = pp->next) {
-		pp = (struct property *) (base + (unsigned long)pp);
-		if (strcmp((char *)((unsigned long)pp->name + base),
-			   prop) == 0) {
-			return (void *)((unsigned long)pp->value + base);
-		}
-	}
-	return NULL;
-}
-
-/* Is boot-info compatible ? */
-#define BOOT_INFO_IS_COMPATIBLE(bi)		((bi)->compatible_version <= BOOT_INFO_VERSION)
-#define BOOT_INFO_IS_V2_COMPATIBLE(bi)	((bi)->version >= 2)
-#define BOOT_INFO_IS_V4_COMPATIBLE(bi)	((bi)->version >= 4)
-
-void __init
-bootx_init(unsigned long r4, unsigned long phys)
-{
-	boot_infos_t *bi = (boot_infos_t *) r4;
-	unsigned long space;
-	unsigned long ptr, x;
-	char *model;
-
-	boot_infos = PTRUNRELOC(bi);
-	if (!BOOT_INFO_IS_V2_COMPATIBLE(bi))
-		bi->logicalDisplayBase = NULL;
-
-#ifdef CONFIG_BOOTX_TEXT
-	btext_init(bi);
-
-	/*
-	 * Test if boot-info is compatible.  Done only in config
-	 * CONFIG_BOOTX_TEXT since there is nothing much we can do
-	 * with an incompatible version, except display a message
-	 * and eventually hang the processor...
-	 *
-	 * I'll try to keep enough of boot-info compatible in the
-	 * future to always allow display of this message;
-	 */
-	if (!BOOT_INFO_IS_COMPATIBLE(bi)) {
-		btext_drawstring(" !!! WARNING - Incompatible version of BootX !!!\n\n\n");
-		btext_flushscreen();
-	}
-#endif	/* CONFIG_BOOTX_TEXT */
-
-	/* New BootX enters kernel with MMU off, i/os are not allowed
-	   here. This hack will have been done by the boostrap anyway.
-	*/
-	if (bi->version < 4) {
-		/*
-		 * XXX If this is an iMac, turn off the USB controller.
-		 */
-		model = (char *) early_get_property
-			(r4 + bi->deviceTreeOffset, 4, "model");
-		if (model
-		    && (strcmp(model, "iMac,1") == 0
-			|| strcmp(model, "PowerMac1,1") == 0)) {
-			out_le32((unsigned *)0x80880008, 1);	/* XXX */
-		}
-	}
-
-	/* Move klimit to enclose device tree, args, ramdisk, etc... */
-	if (bi->version < 5) {
-		space = bi->deviceTreeOffset + bi->deviceTreeSize;
-		if (bi->ramDisk)
-			space = bi->ramDisk + bi->ramDiskSize;
-	} else
-		space = bi->totalParamsSize;
-	klimit = PTRUNRELOC((char *) bi + space);
-
-	/* New BootX will have flushed all TLBs and enters kernel with
-	   MMU switched OFF, so this should not be useful anymore.
-	*/
-	if (bi->version < 4) {
-		/*
-		 * Touch each page to make sure the PTEs for them
-		 * are in the hash table - the aim is to try to avoid
-		 * getting DSI exceptions while copying the kernel image.
-		 */
-		for (ptr = ((unsigned long) &_stext) & PAGE_MASK;
-		     ptr < (unsigned long)bi + space; ptr += PAGE_SIZE)
-			x = *(volatile unsigned long *)ptr;
-	}
-
-#ifdef CONFIG_BOOTX_TEXT
-	/*
-	 * Note that after we call btext_prepare_BAT, we can't do
-	 * prom_draw*, flushscreen or clearscreen until we turn the MMU
-	 * on, since btext_prepare_BAT sets disp_bi.logicalDisplayBase
-	 * to a virtual address.
-	 */
-	btext_prepare_BAT();
-#endif
-}