Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues

3 files changed, 18 insertions, 18 deletions

diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 12885eda324e..549591d9aaa2 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -7,7 +7,7 @@ source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run
 	  other operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -54,7 +54,7 @@ config KVM_BOOK3S_32
 	select KVM
 	select KVM_BOOK3S_32_HANDLER
 	select KVM_BOOK3S_PR_POSSIBLE
-	---help---
+	help
 	  Support running unmodified book3s_32 guest kernels
 	  in virtual machines on book3s_32 host processors.
 
@@ -70,7 +70,7 @@ config KVM_BOOK3S_64
 	select KVM
 	select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
 	select SPAPR_TCE_IOMMU if IOMMU_SUPPORT && (PPC_PSERIES || PPC_POWERNV)
-	---help---
+	help
 	  Support running unmodified book3s_64 and book3s_32 guest kernels
 	  in virtual machines on book3s_64 host processors.
 
@@ -85,7 +85,7 @@ config KVM_BOOK3S_64_HV
 	select KVM_BOOK3S_HV_POSSIBLE
 	select MMU_NOTIFIER
 	select CMA
-	---help---
+	help
 	  Support running unmodified book3s_64 guest kernels in
 	  virtual machines on POWER7 and newer processors that have
 	  hypervisor mode available to the host.
@@ -104,7 +104,7 @@ config KVM_BOOK3S_64_PR
 	tristate "KVM support without using hypervisor mode in host"
 	depends on KVM_BOOK3S_64
 	select KVM_BOOK3S_PR_POSSIBLE
-	---help---
+	help
 	  Support running guest kernels in virtual machines on processors
 	  without using hypervisor mode in the host, by running the
 	  guest in user mode (problem state) and emulating all
@@ -119,7 +119,7 @@ config KVM_BOOK3S_64_PR
 config KVM_BOOK3S_HV_EXIT_TIMING
 	bool "Detailed timing for hypervisor real-mode code"
 	depends on KVM_BOOK3S_HV_POSSIBLE && DEBUG_FS
-	---help---
+	help
 	  Calculate time taken for each vcpu in the real-mode guest entry,
 	  exit, and interrupt handling code, plus time spent in the guest
 	  and in nap mode due to idle (cede) while other threads are still
@@ -136,7 +136,7 @@ config KVM_BOOKE_HV
 config KVM_EXIT_TIMING
 	bool "Detailed exit timing"
 	depends on KVM_E500V2 || KVM_E500MC
-	---help---
+	help
 	  Calculate elapsed time for every exit/enter cycle. A per-vcpu
 	  report is available in debugfs kvm/vm#_vcpu#_timing.
 	  The overhead is relatively small, however it is not recommended for
@@ -150,7 +150,7 @@ config KVM_E500V2
 	select KVM
 	select KVM_MMIO
 	select MMU_NOTIFIER
-	---help---
+	help
 	  Support running unmodified E500 guest kernels in virtual machines on
 	  E500v2 host processors.
 
@@ -166,7 +166,7 @@ config KVM_E500MC
 	select KVM_MMIO
 	select KVM_BOOKE_HV
 	select MMU_NOTIFIER
-	---help---
+	help
 	  Support running unmodified E500MC/E5500/E6500 guest kernels in
 	  virtual machines on E500MC/E5500/E6500 host processors.
 
@@ -194,7 +194,7 @@ config KVM_XICS
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_IRQFD
 	default y
-	---help---
+	help
 	  Include support for the XICS (eXternal Interrupt Controller
 	  Specification) interrupt controller architecture used on
 	  IBM POWER (pSeries) servers.
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 5e6479d409a0..fb7515b4fa9c 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -24,7 +24,7 @@ source "arch/powerpc/platforms/amigaone/Kconfig"
 config KVM_GUEST
 	bool "KVM Guest support"
 	select EPAPR_PARAVIRT
-	---help---
+	help
 	  This option enables various optimizations for running under the KVM
 	  hypervisor. Overhead for the kernel when not running inside KVM should
 	  be minimal.
@@ -230,7 +230,7 @@ config TAU
 config TAU_INT
 	bool "Interrupt driven TAU driver (DANGEROUS)"
 	depends on TAU
-	---help---
+	help
 	  The TAU supports an interrupt driven mode which causes an interrupt
 	  whenever the temperature goes out of range. This is the fastest way
 	  to get notified the temp has exceeded a range. With this option off,
@@ -246,7 +246,7 @@ config TAU_INT
 config TAU_AVERAGE
 	bool "Average high and low temp"
 	depends on TAU
-	---help---
+	help
 	  The TAU hardware can compare the temperature to an upper and lower
 	  bound.  The default behavior is to show both the upper and lower
 	  bound in /proc/cpuinfo. If the range is large, the temperature is
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d349603fb889..87737ec86d39 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -280,7 +280,7 @@ config PHYS_64BIT
 	bool 'Large physical address support' if E500 || PPC_86xx
 	depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
 	select PHYS_ADDR_T_64BIT
-	---help---
+	help
 	  This option enables kernel support for larger than 32-bit physical
 	  addresses.  This feature may not be available on all cores.
 
@@ -293,7 +293,7 @@ config PHYS_64BIT
 config ALTIVEC
 	bool "AltiVec Support"
 	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
-	---help---
+	help
 	  This option enables kernel support for the Altivec extensions to the
 	  PowerPC processor. The kernel currently supports saving and restoring
 	  altivec registers, and turning on the 'altivec enable' bit so user
@@ -309,7 +309,7 @@ config ALTIVEC
 config VSX
 	bool "VSX Support"
 	depends on PPC_BOOK3S_64 && ALTIVEC && PPC_FPU
-	---help---
+	help
 
 	  This option enables kernel support for the Vector Scaler extensions
 	  to the PowerPC processor. The kernel currently supports saving and
@@ -330,7 +330,7 @@ config SPE
 	bool "SPE Support"
 	depends on SPE_POSSIBLE
 	default y
-	---help---
+	help
 	  This option enables kernel support for the Signal Processing
 	  Extensions (SPE) to the PowerPC processor. The kernel currently
 	  supports saving and restoring SPE registers, and turning on the
@@ -446,7 +446,7 @@ config SMP
 	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE || PPC_47x
 	select GENERIC_IRQ_MIGRATION
 	bool "Symmetric multi-processing support" if !FORCE_SMP
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.  Note that the kernel does not currently