diff options
author | Christophe Leroy <christophe.leroy@c-s.fr> | 2019-04-30 12:38:50 +0000 |
---|---|---|
committer | Michael Ellerman <mpe@ellerman.id.au> | 2019-05-03 01:20:26 +1000 |
commit | 8a23fdec3dbdc8bfde6f806d36e773236dab6663 (patch) | |
tree | ad2bebfc38b95673cca75c4ce92d30515f977cb1 /arch/powerpc | |
parent | e4dccf9092ab48a6f902003b9558c0e45d0e849a (diff) | |
download | linux-8a23fdec3dbdc8bfde6f806d36e773236dab6663.tar.bz2 |
powerpc/32: Refactor EXCEPTION entry macros for head_8xx.S and head_32.S
EXCEPTION_PROLOG is similar in head_8xx.S and head_32.S
This patch creates head_32.h and moves EXCEPTION_PROLOG macro
into it. It also converts it from a GCC macro to a GAS macro
in order to ease refactorisation with 40x later, since
GAS macros allows the use of #ifdef/#else/#endif inside it.
And it also has the advantage of not requiring the uggly "; \"
at the end of each line.
This patch also moves EXCEPTION() and EXC_XFER_XXXX() macros which
are also similar while adding START_EXCEPTION() out of EXCEPTION().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/kernel/head_32.S | 99 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_32.h | 118 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_8xx.S | 98 |
3 files changed, 122 insertions, 193 deletions
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 73288df1c5d6..f98e6b461238 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -37,6 +37,8 @@ #include <asm/export.h> #include <asm/feature-fixups.h> +#include "head_32.h" + /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */ #define LOAD_BAT(n, reg, RA, RB) \ /* see the comment for clear_bats() -- Cort */ \ @@ -246,103 +248,6 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .long -1 -/* - * Exception entry code. This code runs with address translation - * turned off, i.e. using physical addresses. - * We assume sprg3 has the physical address of the current - * task's thread_struct. - */ -#define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG_SCRATCH0,r10; \ - mtspr SPRN_SPRG_SCRATCH1,r11; \ - mfcr r10; \ - EXCEPTION_PROLOG_1; \ - EXCEPTION_PROLOG_2 - -#define EXCEPTION_PROLOG_1 \ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ - andi. r11,r11,MSR_PR; \ - tophys(r11,r1); /* use tophys(r1) if kernel */ \ - beq 1f; \ - mfspr r11,SPRN_SPRG_THREAD; \ - lwz r11,TASK_STACK-THREAD(r11); \ - addi r11,r11,THREAD_SIZE; \ - tophys(r11,r11); \ -1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ - - -#define EXCEPTION_PROLOG_2 \ - stw r10,_CCR(r11); /* save registers */ \ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG_SCRATCH0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG_SCRATCH1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_SRR0; \ - mfspr r9,SPRN_SRR1; \ - stw r1,GPR1(r11); \ - stw r1,0(r11); \ - tovirt(r1,r11); /* set new kernel sp */ \ - li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ - MTMSRD(r10); /* (except for mach check in rtas) */ \ - stw r0,GPR0(r11); \ - lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \ - addi r10,r10,STACK_FRAME_REGS_MARKER@l; \ - stw r10,8(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Note: code which follows this uses cr0.eq (set if from kernel), - * r11, r12 (SRR0), and r9 (SRR1). - * - * Note2: once we have set r1 we are in a position to take exceptions - * again, and we could thus set MSR:RI at that point. - */ - -/* - * Exception vectors. - */ -#define EXCEPTION(n, label, hdlr, xfer) \ - . = n; \ - DO_KVM n; \ -label: \ - EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,_TRAP(r11); \ - li r10,MSR_KERNEL; \ - copyee(r10, r9); \ - bl tfer; \ -i##n: \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ - ret_from_except) - /* System reset */ /* core99 pmac starts the seconary here by changing the vector, and putting it back to what it was (unknown_exception) when done. */ diff --git a/arch/powerpc/kernel/head_32.h b/arch/powerpc/kernel/head_32.h new file mode 100644 index 000000000000..7456e2a45acc --- /dev/null +++ b/arch/powerpc/kernel/head_32.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __HEAD_32_H__ +#define __HEAD_32_H__ + +#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */ + +/* + * Exception entry code. This code runs with address translation + * turned off, i.e. using physical addresses. + * We assume sprg3 has the physical address of the current + * task's thread_struct. + */ + +.macro EXCEPTION_PROLOG + mtspr SPRN_SPRG_SCRATCH0,r10 + mtspr SPRN_SPRG_SCRATCH1,r11 + mfcr r10 + EXCEPTION_PROLOG_1 + EXCEPTION_PROLOG_2 +.endm + +.macro EXCEPTION_PROLOG_1 + mfspr r11,SPRN_SRR1 /* check whether user or kernel */ + andi. r11,r11,MSR_PR + tophys(r11,r1) /* use tophys(r1) if kernel */ + beq 1f + mfspr r11,SPRN_SPRG_THREAD + lwz r11,TASK_STACK-THREAD(r11) + addi r11,r11,THREAD_SIZE + tophys(r11,r11) +1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ +.endm + +.macro EXCEPTION_PROLOG_2 + stw r10,_CCR(r11) /* save registers */ + stw r12,GPR12(r11) + stw r9,GPR9(r11) + mfspr r10,SPRN_SPRG_SCRATCH0 + stw r10,GPR10(r11) + mfspr r12,SPRN_SPRG_SCRATCH1 + stw r12,GPR11(r11) + mflr r10 + stw r10,_LINK(r11) + mfspr r12,SPRN_SRR0 + mfspr r9,SPRN_SRR1 + stw r1,GPR1(r11) + stw r1,0(r11) + tovirt(r1,r11) /* set new kernel sp */ + li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR) /* can take exceptions */ + MTMSRD(r10) /* (except for mach check in rtas) */ + stw r0,GPR0(r11) + lis r10,STACK_FRAME_REGS_MARKER@ha /* exception frame marker */ + addi r10,r10,STACK_FRAME_REGS_MARKER@l + stw r10,8(r11) + SAVE_4GPRS(3, r11) + SAVE_2GPRS(7, r11) +.endm + +/* + * Note: code which follows this uses cr0.eq (set if from kernel), + * r11, r12 (SRR0), and r9 (SRR1). + * + * Note2: once we have set r1 we are in a position to take exceptions + * again, and we could thus set MSR:RI at that point. + */ + +/* + * Exception vectors. + */ +#ifdef CONFIG_PPC_BOOK3S +#define START_EXCEPTION(n, label) \ + . = n; \ + DO_KVM n; \ +label: + +#else +#define START_EXCEPTION(n, label) \ + . = n; \ +label: + +#endif + +#define EXCEPTION(n, label, hdlr, xfer) \ + START_EXCEPTION(n, label) \ + EXCEPTION_PROLOG; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + xfer(n, hdlr) + +#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ + li r10,trap; \ + stw r10,_TRAP(r11); \ + li r10,MSR_KERNEL; \ + copyee(r10, r9); \ + bl tfer; \ +i##n: \ + .long hdlr; \ + .long ret + +#define COPY_EE(d, s) rlwimi d,s,0,MSR_EE +#define NOCOPY(d, s) + +#define EXC_XFER_STD(n, hdlr) \ + EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ + ret_from_except) + +#define EXC_XFER_EE(n, hdlr) \ + EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ + ret_from_except_full) + +#define EXC_XFER_EE_LITE(n, hdlr) \ + EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ + ret_from_except) + +#endif /* __HEAD_32_H__ */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index d25adb6ef235..14c3eb3267b8 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -33,6 +33,8 @@ #include <asm/export.h> #include <asm/code-patching-asm.h> +#include "head_32.h" + #if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000 /* By simply checking Address >= 0x80000000, we know if its a kernel address */ #define SIMPLE_KERNEL_ADDRESS 1 @@ -123,102 +125,6 @@ instruction_counter: .space 4 #endif -/* - * Exception entry code. This code runs with address translation - * turned off, i.e. using physical addresses. - * We assume sprg3 has the physical address of the current - * task's thread_struct. - */ -#define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG_SCRATCH0, r10; \ - mtspr SPRN_SPRG_SCRATCH1, r11; \ - mfcr r10; \ - EXCEPTION_PROLOG_1; \ - EXCEPTION_PROLOG_2 - -#define EXCEPTION_PROLOG_1 \ - mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ - andi. r11,r11,MSR_PR; \ - tophys(r11,r1); /* use tophys(r1) if kernel */ \ - beq 1f; \ - mfspr r11,SPRN_SPRG_THREAD; \ - lwz r11,TASK_STACK-THREAD(r11); \ - addi r11,r11,THREAD_SIZE; \ - tophys(r11,r11); \ -1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */ - - -#define EXCEPTION_PROLOG_2 \ - stw r10,_CCR(r11); /* save registers */ \ - stw r12,GPR12(r11); \ - stw r9,GPR9(r11); \ - mfspr r10,SPRN_SPRG_SCRATCH0; \ - stw r10,GPR10(r11); \ - mfspr r12,SPRN_SPRG_SCRATCH1; \ - stw r12,GPR11(r11); \ - mflr r10; \ - stw r10,_LINK(r11); \ - mfspr r12,SPRN_SRR0; \ - mfspr r9,SPRN_SRR1; \ - stw r1,GPR1(r11); \ - stw r1,0(r11); \ - tovirt(r1,r11); /* set new kernel sp */ \ - li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \ - mtmsr r10; \ - stw r0,GPR0(r11); \ - lis r10, STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \ - addi r10, r10, STACK_FRAME_REGS_MARKER@l; \ - stw r10, 8(r11); \ - SAVE_4GPRS(3, r11); \ - SAVE_2GPRS(7, r11) - -/* - * Note: code which follows this uses cr0.eq (set if from kernel), - * r11, r12 (SRR0), and r9 (SRR1). - * - * Note2: once we have set r1 we are in a position to take exceptions - * again, and we could thus set MSR:RI at that point. - */ - -/* - * Exception vectors. - */ -#define EXCEPTION(n, label, hdlr, xfer) \ - . = n; \ -label: \ - EXCEPTION_PROLOG; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - xfer(n, hdlr) - -#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \ - li r10,trap; \ - stw r10,_TRAP(r11); \ - li r10,MSR_KERNEL; \ - copyee(r10, r9); \ - bl tfer; \ -i##n: \ - .long hdlr; \ - .long ret - -#define COPY_EE(d, s) rlwimi d,s,0,16,16 -#define NOCOPY(d, s) - -#define EXC_XFER_STD(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \ - ret_from_except) - -#define EXC_XFER_EE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \ - ret_from_except_full) - -#define EXC_XFER_EE_LITE(n, hdlr) \ - EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \ - ret_from_except) - /* System reset */ EXCEPTION(0x100, Reset, system_reset_exception, EXC_XFER_STD) |