Merge branch 'next' into for-linus

Prepare input updates for 4.12 merge window.

3 files changed, 61 insertions, 6 deletions

diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index ada29eaed6e2..f523ac883150 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -274,7 +274,9 @@ failed:
 			if (bank->disk->major > 0)
 				unregister_blkdev(bank->disk->major,
 						bank->disk->disk_name);
-			del_gendisk(bank->disk);
+			if (bank->disk->flags & GENHD_FL_UP)
+				del_gendisk(bank->disk);
+			put_disk(bank->disk);
 		}
 		device->dev.platform_data = NULL;
 		if (bank->io_addr != 0)
@@ -299,6 +301,7 @@ axon_ram_remove(struct platform_device *device)
 	device_remove_file(&device->dev, &dev_attr_ecc);
 	free_irq(bank->irq_id, device);
 	del_gendisk(bank->disk);
+	put_disk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
 	kfree(bank);
 
diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c
index 60c57657c772..b53f80f0b4d8 100644
--- a/arch/powerpc/sysdev/xics/icp-opal.c
+++ b/arch/powerpc/sysdev/xics/icp-opal.c
@@ -91,6 +91,16 @@ static unsigned int icp_opal_get_irq(void)
 
 static void icp_opal_set_cpu_priority(unsigned char cppr)
 {
+	/*
+	 * Here be dragons. The caller has asked to allow only IPI's and not
+	 * external interrupts. But OPAL XIVE doesn't support that. So instead
+	 * of allowing no interrupts allow all. That's still not right, but
+	 * currently the only caller who does this is xics_migrate_irqs_away()
+	 * and it works in that case.
+	 */
+	if (cppr >= DEFAULT_PRIORITY)
+		cppr = LOWEST_PRIORITY;
+
 	xics_set_base_cppr(cppr);
 	opal_int_set_cppr(cppr);
 	iosync();
@@ -120,18 +130,49 @@ static void icp_opal_cause_ipi(int cpu, unsigned long data)
 {
 	int hw_cpu = get_hard_smp_processor_id(cpu);
 
+	kvmppc_set_host_ipi(cpu, 1);
 	opal_int_set_mfrr(hw_cpu, IPI_PRIORITY);
 }
 
 static irqreturn_t icp_opal_ipi_action(int irq, void *dev_id)
 {
-	int hw_cpu = hard_smp_processor_id();
+	int cpu = smp_processor_id();
 
-	opal_int_set_mfrr(hw_cpu, 0xff);
+	kvmppc_set_host_ipi(cpu, 0);
+	opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff);
 
 	return smp_ipi_demux();
 }
 
+/*
+ * Called when an interrupt is received on an off-line CPU to
+ * clear the interrupt, so that the CPU can go back to nap mode.
+ */
+void icp_opal_flush_interrupt(void)
+{
+	unsigned int xirr;
+	unsigned int vec;
+
+	do {
+		xirr = icp_opal_get_xirr();
+		vec = xirr & 0x00ffffff;
+		if (vec == XICS_IRQ_SPURIOUS)
+			break;
+		if (vec == XICS_IPI) {
+			/* Clear pending IPI */
+			int cpu = smp_processor_id();
+			kvmppc_set_host_ipi(cpu, 0);
+			opal_int_set_mfrr(get_hard_smp_processor_id(cpu), 0xff);
+		} else {
+			pr_err("XICS: hw interrupt 0x%x to offline cpu, "
+			       "disabling\n", vec);
+			xics_mask_unknown_vec(vec);
+		}
+
+		/* EOI the interrupt */
+	} while (opal_int_eoi(xirr) > 0);
+}
+
 #endif /* CONFIG_SMP */
 
 static const struct icp_ops icp_opal_ops = {
diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c
index 69d858e51ac7..23efe4e42172 100644
--- a/arch/powerpc/sysdev/xics/xics-common.c
+++ b/arch/powerpc/sysdev/xics/xics-common.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/delay.h>
 
 #include <asm/prom.h>
 #include <asm/io.h>
@@ -198,9 +199,6 @@ void xics_migrate_irqs_away(void)
 	/* Remove ourselves from the global interrupt queue */
 	xics_set_cpu_giq(xics_default_distrib_server, 0);
 
-	/* Allow IPIs again... */
-	icp_ops->set_priority(DEFAULT_PRIORITY);
-
 	for_each_irq_desc(virq, desc) {
 		struct irq_chip *chip;
 		long server;
@@ -255,6 +253,19 @@ void xics_migrate_irqs_away(void)
 unlock:
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 	}
+
+	/* Allow "sufficient" time to drop any inflight IRQ's */
+	mdelay(5);
+
+	/*
+	 * Allow IPIs again. This is done at the very end, after migrating all
+	 * interrupts, the expectation is that we'll only get woken up by an IPI
+	 * interrupt beyond this point, but leave externals masked just to be
+	 * safe. If we're using icp-opal this may actually allow all
+	 * interrupts anyway, but that should be OK.
+	 */
+	icp_ops->set_priority(DEFAULT_PRIORITY);
+
 }
 #endif /* CONFIG_HOTPLUG_CPU */