Merge remote-tracking branch 'scott/next' into next

Freescale updates from Scott:

<<
Highlights include 32-bit booke relocatable support, e6500 hardware
tablewalk support, various e500 SPE fixes, some new/revived boards, and
e6500 deeper idle and altivec powerdown modes.
>>

11 files changed, 447 insertions, 57 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 4d4634958cfb..c17aae80e7ff 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -123,6 +123,12 @@ config P1023_RDS
 	help
 	  This option enables support for the P1023 RDS and RDB boards
 
+config TWR_P102x
+	bool "Freescale TWR-P102x"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the TWR-P1025 board.
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index dd4c0b59577b..25cebe74ac46 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
+obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
 obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
diff --git a/arch/powerpc/platforms/85xx/common.c b/arch/powerpc/platforms/85xx/common.c
index eba78c85303f..3b085c7ee539 100644
--- a/arch/powerpc/platforms/85xx/common.c
+++ b/arch/powerpc/platforms/85xx/common.c
@@ -9,6 +9,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
+#include <asm/qe.h>
 #include <sysdev/cpm2_pic.h>
 
 #include "mpc85xx.h"
@@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void)
 	irq_set_chained_handler(irq, cpm2_cascade);
 }
 #endif
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc85xx_qe_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np) {
+		np = of_find_node_by_name(NULL, "qe");
+		if (!np) {
+			pr_err("%s: Could not find Quicc Engine node\n",
+					__func__);
+			return;
+		}
+	}
+
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	qe_reset();
+	of_node_put(np);
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np) {
+		struct device_node *ucc;
+
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(ucc, "ucc")
+			par_io_of_config(ucc);
+
+	}
+}
+#endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx.h b/arch/powerpc/platforms/85xx/mpc85xx.h
index 2aa7c5dc2c7f..fc51dd4092e5 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx.h
+++ b/arch/powerpc/platforms/85xx/mpc85xx.h
@@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void);
 static inline void __init mpc85xx_cpm2_pic_init(void) {}
 #endif /* CONFIG_CPM2 */
 
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc85xx_qe_init(void);
+#else
+static inline void __init mpc85xx_qe_init(void) {}
+#endif
+
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index a7b3621a8df5..34f3c5eb3bee 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
  * All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
@@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void)
 {
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "qe");
-		if (!np)
-			return;
-	}
-
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	qe_reset();
-	of_node_put(np);
-
-	np = of_find_node_by_name(NULL, "par_io");
-	if (np) {
-		struct device_node *ucc;
-
-		par_io_init(np);
-		of_node_put(np);
-
-		for_each_node_by_name(ucc, "ucc")
-			par_io_of_config(ucc);
-	}
-
+	mpc85xx_qe_init();
 	mpc85xx_mds_reset_ucc_phys();
 
 	if (machine_is(p1021_mds)) {
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
index 53b6fb0a3d56..e15bdd18fdb2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -1,7 +1,7 @@
 /*
  * MPC85xx RDB Board Setup
  *
- * Copyright 2009,2012 Freescale Semiconductor Inc.
+ * Copyright 2009,2012-2013 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 	fsl_pci_assign_primary();
 
 #ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np) {
-		pr_err("%s: Could not find Quicc Engine node\n", __func__);
-		goto qe_fail;
-	}
-
-	qe_reset();
-	of_node_put(np);
-
-	np = of_find_node_by_name(NULL, "par_io");
-	if (np) {
-		struct device_node *ucc;
-
-		par_io_init(np);
-		of_node_put(np);
-
-		for_each_node_by_name(ucc, "ucc")
-			par_io_of_config(ucc);
-
-	}
+	mpc85xx_qe_init();
 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
 	if (machine_is(p1025_rdb)) {
 
@@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 	}
 #endif
-
-qe_fail:
 #endif	/* CONFIG_QUICC_ENGINE */
 
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 393f975ab397..6382098d6f8d 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void smp_85xx_setup_cpu(int cpu_nr)
+static void smp_85xx_basic_setup(int cpu_nr)
 {
-	if (smp_85xx_ops.probe == smp_mpic_probe)
-		mpic_setup_this_cpu();
-
 	if (cpu_has_feature(CPU_FTR_DBELL))
 		doorbell_setup_this_cpu();
 }
 
+static void smp_85xx_setup_cpu(int cpu_nr)
+{
+	mpic_setup_this_cpu();
+	smp_85xx_basic_setup(cpu_nr);
+}
+
 static const struct of_device_id mpc85xx_smp_guts_ids[] = {
 	{ .compatible = "fsl,mpc8572-guts", },
 	{ .compatible = "fsl,p1020-guts", },
@@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
 
-	smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np) {
 		smp_85xx_ops.probe = smp_mpic_probe;
+		smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 		smp_85xx_ops.message_pass = smp_mpic_message_pass;
-	}
+	} else
+		smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
 
 	if (cpu_has_feature(CPU_FTR_DBELL)) {
 		/*
@@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void)
 		 */
 		smp_85xx_ops.message_pass = NULL;
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
+		smp_85xx_ops.probe = NULL;
 	}
 
 	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
new file mode 100644
index 000000000000..c25ff10f05ee
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/twr_p102x.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Michael Johnston <michael.johnston@freescale.com>
+ *
+ * Description:
+ * TWR-P102x Board Setup
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+static void __init twr_p1025_pic_init(void)
+{
+	struct mpic *mpic;
+
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SINGLE_DEST_CPU,
+			0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (np) {
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+		of_node_put(np);
+	} else
+		pr_err("Could not find qe-ic node\n");
+#endif
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init twr_p1025_setup_arch(void)
+{
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("twr_p1025_setup_arch()", 0);
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+
+#ifdef CONFIG_QUICC_ENGINE
+	mpc85xx_qe_init();
+
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+	if (machine_is(twr_p1025)) {
+		struct ccsr_guts __iomem *guts;
+
+		np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
+		if (np) {
+			guts = of_iomap(np, 0);
+			if (!guts)
+				pr_err("twr_p1025: could not map global utilities register\n");
+			else {
+			/* P1025 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management signals in PMUXCR
+			 * register.
+			 * Set QE mux bits in PMUXCR */
+			setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+					MPC85xx_PMUXCR_QE(3) |
+					MPC85xx_PMUXCR_QE(9) |
+					MPC85xx_PMUXCR_QE(12));
+			iounmap(guts);
+
+#if defined(CONFIG_SERIAL_QE)
+			/* On P1025TWR board, the UCC7 acted as UART port.
+			 * However, The UCC7's CTS pin is low level in default,
+			 * it will impact the transmission in full duplex
+			 * communication. So disable the Flow control pin PA18.
+			 * The UCC7 UART just can use RXD and TXD pins.
+			 */
+			par_io_config_pin(0, 18, 0, 0, 0, 0);
+#endif
+			/* Drive PB29 to CPLD low - CPLD will then change
+			 * muxing from LBC to QE */
+			par_io_config_pin(1, 29, 1, 0, 0, 0);
+			par_io_data_set(1, 29, 0);
+			}
+			of_node_put(np);
+		}
+	}
+#endif
+#endif	/* CONFIG_QUICC_ENGINE */
+
+	pr_info("TWR-P1025 board from Freescale Semiconductor\n");
+}
+
+machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices);
+
+static int __init twr_p1025_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,TWR-P1025");
+}
+
+define_machine(twr_p1025) {
+	.name			= "TWR-P1025",
+	.probe			= twr_p1025_probe,
+	.setup_arch		= twr_p1025_setup_arch,
+	.init_IRQ		= twr_p1025_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 302ba43d73a1..6d3c7a9fd047 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -67,6 +67,18 @@ config PPC_C2K
 	  This option enables support for the GE Fanuc C2K board (formerly
 	  an SBS board).
 
+config MVME5100
+	bool "Motorola/Emerson MVME5100"
+	depends on EMBEDDED6xx
+	select MPIC
+	select PCI
+	select PPC_INDIRECT_PCI
+	select PPC_I8259
+	select PPC_NATIVE
+	help
+	  This option enables support for the Motorola (now Emerson) MVME5100
+	  board.
+
 config TSI108_BRIDGE
 	bool
 	select PCI
@@ -113,4 +125,3 @@ config WII
 	help
 	  Select WII if configuring for the Nintendo Wii.
 	  More information at: <http://gc-linux.sourceforge.net/>
-
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 66c23e423f40..cdd48d402b93 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
 obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
 obj-$(CONFIG_GAMECUBE)		+= gamecube.o
 obj-$(CONFIG_WII)		+= wii.o hlwd-pic.o
+obj-$(CONFIG_MVME5100)		+= mvme5100.o
diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c
new file mode 100644
index 000000000000..25e3bfb64efb
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c
@@ -0,0 +1,221 @@
+/*
+ * Board setup routines for the Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * Based on earlier code by:
+ *
+ *    Matt Porter, MontaVista Software Inc.
+ *    Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/i8259.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#define HAWK_MPIC_SIZE		0x00040000U
+#define MVME5100_PCI_MEM_OFFSET 0x00000000
+
+/* Board register addresses. */
+#define BOARD_STATUS_REG	0xfef88080
+#define BOARD_MODFAIL_REG	0xfef88090
+#define BOARD_MODRST_REG	0xfef880a0
+#define BOARD_TBEN_REG		0xfef880c0
+#define BOARD_SW_READ_REG	0xfef880e0
+#define BOARD_GEO_ADDR_REG	0xfef880e8
+#define BOARD_EXT_FEATURE1_REG	0xfef880f0
+#define BOARD_EXT_FEATURE2_REG	0xfef88100
+
+static phys_addr_t pci_membase;
+static u_char *restart;
+
+static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init mvme5100_pic_init(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct device_node *cp = NULL;
+	unsigned int cirq;
+	unsigned long intack = 0;
+	const u32 *prop = NULL;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		pr_err("Could not find open-pic node\n");
+		return;
+	}
+
+	mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
+
+	mpic_init(mpic);
+
+	cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (cp == NULL) {
+		pr_warn("mvme5100_pic_init: couldn't find i8259\n");
+		return;
+	}
+
+	cirq = irq_of_parse_and_map(cp, 0);
+	if (cirq == NO_IRQ) {
+		pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
+	if (np) {
+		prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+
+		if (prop)
+			intack = prop[0];
+
+		of_node_put(np);
+	}
+
+	if (intack)
+		pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
+		   intack);
+
+	i8259_init(cp, intack);
+	of_node_put(cp);
+	irq_set_chained_handler(cirq, mvme5100_8259_cascade);
+}
+
+static int __init mvme5100_add_bridge(struct device_node *dev)
+{
+	const int		*bus_range;
+	int			len;
+	struct pci_controller	*hose;
+	unsigned short		devid;
+
+	pr_info("Adding PCI host bridge %s\n", dev->full_name);
+
+	bus_range = of_get_property(dev, "bus-range", &len);
+
+	hose = pcibios_alloc_controller(dev);
+	if (hose == NULL)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
+
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+
+	early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
+
+	if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
+		pr_err("HAWK PHB not present?\n");
+		return 0;
+	}
+
+	early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+	if (pci_membase == 0) {
+		pr_err("HAWK PHB mibar not correctly set?\n");
+		return 0;
+	}
+
+	pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
+
+	return 0;
+}
+
+static struct of_device_id mvme5100_of_bus_ids[] __initdata = {
+	{ .compatible = "hawk-bridge", },
+	{},
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme5100_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mvme5100_setup_arch()", 0);
+
+	for_each_compatible_node(np, "pci", "hawk-pci")
+		mvme5100_add_bridge(np);
+
+	restart = ioremap(BOARD_MODRST_REG, 4);
+}
+
+
+static void mvme5100_show_cpuinfo(struct seq_file *m)
+{
+	seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
+	seq_puts(m, "Machine\t\t: MVME5100\n");
+}
+
+static void mvme5100_restart(char *cmd)
+{
+
+	local_irq_disable();
+	mtmsr(mfmsr() | MSR_IP);
+
+	out_8((u_char *) restart, 0x01);
+
+	while (1)
+		;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme5100_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MVME5100");
+}
+
+static int __init probe_of_platform_devices(void)
+{
+
+	of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
+	return 0;
+}
+
+machine_device_initcall(mvme5100, probe_of_platform_devices);
+
+define_machine(mvme5100) {
+	.name			= "MVME5100",
+	.probe			= mvme5100_probe,
+	.setup_arch		= mvme5100_setup_arch,
+	.init_IRQ		= mvme5100_pic_init,
+	.show_cpuinfo		= mvme5100_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= mvme5100_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};