Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "So here's my next branch for powerpc.  A bit late as I was on vacation
  last week.  It's mostly the same stuff that was in next already, I
  just added two patches today which are the wiring up of lockref for
  powerpc, which for some reason fell through the cracks last time and
  is trivial.

  The highlights are, in addition to a bunch of bug fixes:

   - Reworked Machine Check handling on kernels running without a
     hypervisor (or acting as a hypervisor).  Provides hooks to handle
     some errors in real mode such as TLB errors, handle SLB errors,
     etc...

   - Support for retrieving memory error information from the service
     processor on IBM servers running without a hypervisor and routing
     them to the memory poison infrastructure.

   - _PAGE_NUMA support on server processors

   - 32-bit BookE relocatable kernel support

   - FSL e6500 hardware tablewalk support

   - A bunch of new/revived board support

   - FSL e6500 deeper idle states and altivec powerdown support

  You'll notice a generic mm change here, it has been acked by the
  relevant authorities and is a pre-req for our _PAGE_NUMA support"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (121 commits)
  powerpc: Implement arch_spin_is_locked() using arch_spin_value_unlocked()
  powerpc: Add support for the optimised lockref implementation
  powerpc/powernv: Call OPAL sync before kexec'ing
  powerpc/eeh: Escalate error on non-existing PE
  powerpc/eeh: Handle multiple EEH errors
  powerpc: Fix transactional FP/VMX/VSX unavailable handlers
  powerpc: Don't corrupt transactional state when using FP/VMX in kernel
  powerpc: Reclaim two unused thread_info flag bits
  powerpc: Fix races with irq_work
  Move precessing of MCE queued event out from syscall exit path.
  pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines
  powerpc: Make add_system_ram_resources() __init
  powerpc: add SATA_MV to ppc64_defconfig
  powerpc/powernv: Increase candidate fw image size
  powerpc: Add debug checks to catch invalid cpu-to-node mappings
  powerpc: Fix the setup of CPU-to-Node mappings during CPU online
  powerpc/iommu: Don't detach device without IOMMU group
  powerpc/eeh: Hotplug improvement
  powerpc/eeh: Call opal_pci_reinit() on powernv for restoring config space
  powerpc/eeh: Add restore_config operation
  ...

1 files changed, 77 insertions, 3 deletions

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 07ba45b0f07c..94cd728166d3 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -52,6 +52,7 @@
 #include <asm/smp.h>
 #include <asm/machdep.h>
 #include <asm/setup.h>
+#include <asm/paca.h>
 
 #include "mmu_decl.h"
 
@@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 	return 1UL << camsize;
 }
 
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+					unsigned long ram, int max_cam_idx)
 {
 	int i;
-	unsigned long virt = PAGE_OFFSET;
-	phys_addr_t phys = memstart_addr;
 	unsigned long amount_mapped = 0;
 
 	/* Calculate CAM values */
@@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 	}
 	tlbcam_index = i;
 
+#ifdef CONFIG_PPC64
+	get_paca()->tcd.esel_next = i;
+	get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+	get_paca()->tcd.esel_first = i;
+#endif
+
 	return amount_mapped;
 }
 
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+{
+	unsigned long virt = PAGE_OFFSET;
+	phys_addr_t phys = memstart_addr;
+
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+}
+
 #ifdef CONFIG_PPC32
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
@@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void)
 	/* adjust lowmem size to __max_low_memory */
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
+	i = switch_to_as1();
 	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+	restore_to_as0(i, 0, 0, 1);
 
 	pr_info("Memory CAM mapping: ");
 	for (i = 0; i < tlbcam_index - 1; i++)
@@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	/* 64M mapped initially according to head_fsl_booke.S */
 	memblock_set_current_limit(min_t(u64, limit, 0x04000000));
 }
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+	unsigned long base = KERNELBASE;
+
+	kernstart_addr = start;
+	if (is_second_reloc) {
+		virt_phys_offset = PAGE_OFFSET - memstart_addr;
+		return;
+	}
+
+	/*
+	 * Relocatable kernel support based on processing of dynamic
+	 * relocation entries. Before we get the real memstart_addr,
+	 * We will compute the virt_phys_offset like this:
+	 * virt_phys_offset = stext.run - kernstart_addr
+	 *
+	 * stext.run = (KERNELBASE & ~0x3ffffff) +
+	 *				(kernstart_addr & 0x3ffffff)
+	 * When we relocate, we have :
+	 *
+	 *	(kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+	 *
+	 * hence:
+	 *  virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+	 *                              (kernstart_addr & ~0x3ffffff)
+	 *
+	 */
+	start &= ~0x3ffffff;
+	base &= ~0x3ffffff;
+	virt_phys_offset = base - start;
+	early_get_first_memblock_info(__va(dt_ptr), NULL);
+	/*
+	 * We now get the memstart_addr, then we should check if this
+	 * address is the same as what the PAGE_OFFSET map to now. If
+	 * not we have to change the map of PAGE_OFFSET to memstart_addr
+	 * and do a second relocation.
+	 */
+	if (start != memstart_addr) {
+		int n;
+		long offset = start - memstart_addr;
+
+		is_second_reloc = 1;
+		n = switch_to_as1();
+		/* map a 64M area for the second relocation */
+		if (memstart_addr > start)
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+		else
+			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+					0x4000000, CONFIG_LOWMEM_CAM_NUM);
+		restore_to_as0(n, offset, __va(dt_ptr), 1);
+		/* We should never reach here */
+		panic("Relocation error");
+	}
+}
+#endif
 #endif