Merge tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "A handful of fixes, mostly for new code:

   - some reworking of the new STRICT_KERNEL_RWX support to make sure we
     also remove executable permission from __init memory before it's
     freed.

   - a fix to some recent optimisations to the hypercall entry where we
     were clobbering r12, this was breaking nested guests (PR KVM).

   - a fix for the recent patch to opal_configure_cores(). This could
     break booting on bare metal Power8 boxes if the kernel was built
     without CONFIG_JUMP_LABEL_FEATURE_CHECK_DEBUG.

   - .. and finally a workaround for spurious PMU interrupts on Power9
     DD2.

  Thanks to: Nicholas Piggin, Anton Blanchard, Balbir Singh"

* tag 'powerpc-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Mark __init memory no-execute when STRICT_KERNEL_RWX=y
  powerpc/mm/hash: Refactor hash__mark_rodata_ro()
  powerpc/mm/radix: Refactor radix__mark_rodata_ro()
  powerpc/64s: Fix hypercall entry clobbering r12 input
  powerpc/perf: Avoid spurious PMU interrupts after idle
  powerpc/powernv: Fix boot on Power8 bare metal due to opal_configure_cores()

2 files changed, 28 insertions, 15 deletions

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e6d8354d79ef..9029afd1fa2a 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -824,7 +824,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  * r3 volatile parameter and return value for status
  * r4-r10 volatile input and output value
  * r11 volatile hypercall number and output value
- * r12 volatile
+ * r12 volatile input and output value
  * r13-r31 nonvolatile
  * LR nonvolatile
  * CTR volatile
@@ -834,25 +834,26 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  * Other registers nonvolatile
  *
  * The intersection of volatile registers that don't contain possible
- * inputs is: r12, cr0, xer, ctr. We may use these as scratch regs
- * upon entry without saving.
+ * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
+ * without saving, though xer is not a good idea to use, as hardware may
+ * interpret some bits so it may be costly to change them.
  */
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 	/*
 	 * There is a little bit of juggling to get syscall and hcall
-	 * working well. Save r10 in ctr to be restored in case it is a
-	 * hcall.
+	 * working well. Save r13 in ctr to avoid using SPRG scratch
+	 * register.
 	 *
 	 * Userspace syscalls have already saved the PPR, hcalls must save
 	 * it before setting HMT_MEDIUM.
 	 */
 #define SYSCALL_KVMTEST							\
-	mr	r12,r13;						\
+	mtctr	r13;							\
 	GET_PACA(r13);							\
-	mtctr	r10;							\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
 	HMT_MEDIUM;							\
-	mr	r9,r12;							\
+	mfctr	r9;
 
 #else
 #define SYSCALL_KVMTEST							\
@@ -935,8 +936,8 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100)
 	 * This is a hcall, so register convention is as above, with these
 	 * differences:
 	 * r13 = PACA
-	 * r12 = orig r13
-	 * ctr = orig r10
+	 * ctr = orig r13
+	 * orig r10 saved in PACA
 	 */
 TRAMP_KVM_BEGIN(do_kvm_0xc00)
 	 /*
@@ -944,14 +945,13 @@ TRAMP_KVM_BEGIN(do_kvm_0xc00)
 	  * HMT_MEDIUM. That allows the KVM code to save that value into the
 	  * guest state (it is the guest's PPR value).
 	  */
-	OPT_GET_SPR(r0, SPRN_PPR, CPU_FTR_HAS_PPR)
+	OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
-	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r0, CPU_FTR_HAS_PPR)
+	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
 	mfctr	r10
-	SET_SCRATCH0(r12)
+	SET_SCRATCH0(r10)
 	std	r9,PACA_EXGEN+EX_R9(r13)
 	mfcr	r9
-	std	r10,PACA_EXGEN+EX_R10(r13)
 	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
 #endif
 
diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S
index 5adb390e773b..516ebef905c0 100644
--- a/arch/powerpc/kernel/idle_book3s.S
+++ b/arch/powerpc/kernel/idle_book3s.S
@@ -30,6 +30,7 @@
  * Use unused space in the interrupt stack to save and restore
  * registers for winkle support.
  */
+#define _MMCR0	GPR0
 #define _SDR1	GPR3
 #define _PTCR	GPR3
 #define _RPR	GPR4
@@ -272,6 +273,14 @@ power_enter_stop:
 	b 	pnv_wakeup_noloss
 
 .Lhandle_esl_ec_set:
+	/*
+	 * POWER9 DD2 can incorrectly set PMAO when waking up after a
+	 * state-loss idle. Saving and restoring MMCR0 over idle is a
+	 * workaround.
+	 */
+	mfspr	r4,SPRN_MMCR0
+	std	r4,_MMCR0(r1)
+
 /*
  * Check if the requested state is a deep idle state.
  */
@@ -450,10 +459,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 pnv_restore_hyp_resource_arch300:
 	/*
 	 * Workaround for POWER9, if we lost resources, the ERAT
-	 * might have been mixed up and needs flushing.
+	 * might have been mixed up and needs flushing. We also need
+	 * to reload MMCR0 (see comment above).
 	 */
 	blt	cr3,1f
 	PPC_INVALIDATE_ERAT
+	ld	r1,PACAR1(r13)
+	ld	r4,_MMCR0(r1)
+	mtspr	SPRN_MMCR0,r4
 1:
 	/*
 	 * POWER ISA 3. Use PSSCR to determine if we