summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/power5+-pmu.c
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2009-04-29 22:38:51 +1000
committerIngo Molnar <mingo@elte.hu>2009-04-29 14:58:35 +0200
commitab7ef2e50a557af92f4f90689f51fadadafc16b2 (patch)
tree71ef1cbc279e5d2ad96b6c701617ac60ff36c363 /arch/powerpc/kernel/power5+-pmu.c
parent98144511427c192e4249ff66a3f9debc55c59411 (diff)
downloadlinux-ab7ef2e50a557af92f4f90689f51fadadafc16b2.tar.bz2
perf_counter: powerpc: allow use of limited-function counters
POWER5+ and POWER6 have two hardware counters with limited functionality: PMC5 counts instructions completed in run state and PMC6 counts cycles in run state. (Run state is the state when a hardware RUN bit is 1; the idle task clears RUN while waiting for work to do and sets it when there is work to do.) These counters can't be written to by the kernel, can't generate interrupts, and don't obey the freeze conditions. That means we can only use them for per-task counters (where we know we'll always be in run state; we can't put a per-task counter on an idle task), and only if we don't want interrupts and we do want to count in all processor modes. Obviously some counters can't go on a limited hardware counter, but there are also situations where we can only put a counter on a limited hardware counter - if there are already counters on that exclude some processor modes and we want to put on a per-task cycle or instruction counter that doesn't exclude any processor mode, it could go on if it can use a limited hardware counter. To keep track of these constraints, this adds a flags argument to the processor-specific get_alternatives() functions, with three bits defined: one to say that we can accept alternative event codes that go on limited counters, one to say we only want alternatives on limited counters, and one to say that this is a per-task counter and therefore events that are gated by run state are equivalent to those that aren't (e.g. a "cycles" event is equivalent to a "cycles in run state" event). These flags are computed for each counter and stored in the counter->hw.counter_base field (slightly wonky name for what it does, but it was an existing unused field). Since the limited counters don't freeze when we freeze the other counters, we need some special handling to avoid getting skew between things counted on the limited counters and those counted on normal counters. To minimize this skew, if we are using any limited counters, we read PMC5 and PMC6 immediately after setting and clearing the freeze bit. This is done in a single asm in the new write_mmcr0() function. The code here is specific to PMC5 and PMC6 being the limited hardware counters. Being more general (e.g. having a bitmap of limited hardware counter numbers) would have meant more complex code to read the limited counters when freezing and unfreezing the normal counters, with conditional branches, which would have increased the skew. Since it isn't necessary for the code to be more general at this stage, it isn't. This also extends the back-ends for POWER5+ and POWER6 to be able to handle up to 6 counters rather than the 4 they previously handled. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <18936.19035.163066.892208@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/powerpc/kernel/power5+-pmu.c')
-rw-r--r--arch/powerpc/kernel/power5+-pmu.c117
1 files changed, 98 insertions, 19 deletions
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 1222c8ea3c26..8154eaa2404f 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -78,8 +78,8 @@
* Layout of constraint bits:
* 6666555555555544444444443333333333222222222211111111110000000000
* 3210987654321098765432109876543210987654321098765432109876543210
- * [ ><><>< ><> <><>[ > < >< >< >< ><><><><>
- * NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P4P3P2P1
+ * [ ><><>< ><> <><>[ > < >< >< >< ><><><><><><>
+ * NC G0G1G2 G3 T0T1 UC B0 B1 B2 B3 P6P5P4P3P2P1
*
* NC - number of counters
* 51: NC error 0x0008_0000_0000_0000
@@ -105,18 +105,18 @@
* 30: IDU|GRS events needed 0x00_4000_0000
*
* B0
- * 20-23: Byte 0 event source 0x00f0_0000
+ * 24-27: Byte 0 event source 0x0f00_0000
* Encoding as for the event code
*
* B1, B2, B3
- * 16-19, 12-15, 8-11: Byte 1, 2, 3 event sources
+ * 20-23, 16-19, 12-15: Byte 1, 2, 3 event sources
*
- * P4
- * 7: P1 error 0x80
- * 6-7: Count of events needing PMC4
+ * P6
+ * 11: P6 error 0x800
+ * 10-11: Count of events needing PMC6
*
- * P1..P3
- * 0-6: Count of events needing PMC1..PMC3
+ * P1..P5
+ * 0-9: Count of events needing PMC1..PMC5
*/
static const int grsel_shift[8] = {
@@ -143,11 +143,13 @@ static int power5p_get_constraint(unsigned int event, u64 *maskp, u64 *valp)
pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
- if (pmc > 4)
+ if (pmc > 6)
return -1;
sh = (pmc - 1) * 2;
mask |= 2 << sh;
value |= 1 << sh;
+ if (pmc >= 5 && !(event == 0x500009 || event == 0x600005))
+ return -1;
}
if (event & PM_BUSEVENT_MSK) {
unit = (event >> PM_UNIT_SH) & PM_UNIT_MSK;
@@ -173,16 +175,26 @@ static int power5p_get_constraint(unsigned int event, u64 *maskp, u64 *valp)
value |= (u64)((event >> PM_GRS_SH) & fmask) << sh;
}
/* Set byte lane select field */
- mask |= 0xfULL << (20 - 4 * byte);
- value |= (u64)unit << (20 - 4 * byte);
+ mask |= 0xfULL << (24 - 4 * byte);
+ value |= (u64)unit << (24 - 4 * byte);
+ }
+ if (pmc < 5) {
+ /* need a counter from PMC1-4 set */
+ mask |= 0x8000000000000ull;
+ value |= 0x1000000000000ull;
}
- mask |= 0x8000000000000ull;
- value |= 0x1000000000000ull;
*maskp = mask;
*valp = value;
return 0;
}
+static int power5p_limited_pmc_event(unsigned int event)
+{
+ int pmc = (event >> PM_PMC_SH) & PM_PMC_MSK;
+
+ return pmc == 5 || pmc == 6;
+}
+
#define MAX_ALT 3 /* at most 3 alternatives for any event */
static const unsigned int event_alternatives[][MAX_ALT] = {
@@ -193,6 +205,7 @@ static const unsigned int event_alternatives[][MAX_ALT] = {
{ 0x410c7, 0x441084 }, /* PM_THRD_L2MISS_BOTH_CYC */
{ 0x800c4, 0xc20e0 }, /* PM_DTLB_MISS */
{ 0xc50c6, 0xc60e0 }, /* PM_MRK_DTLB_MISS */
+ { 0x100005, 0x600005 }, /* PM_RUN_CYC */
{ 0x100009, 0x200009 }, /* PM_INST_CMPL */
{ 0x200015, 0x300015 }, /* PM_LSU_LMQ_SRQ_EMPTY_CYC */
{ 0x300009, 0x400009 }, /* PM_INST_DISP */
@@ -260,24 +273,85 @@ static int find_alternative_bdecode(unsigned int event)
return -1;
}
-static int power5p_get_alternatives(unsigned int event, unsigned int alt[])
+static int power5p_get_alternatives(unsigned int event, unsigned int flags,
+ unsigned int alt[])
{
int i, j, ae, nalt = 1;
+ int nlim;
alt[0] = event;
nalt = 1;
+ nlim = power5p_limited_pmc_event(event);
i = find_alternative(event);
if (i >= 0) {
for (j = 0; j < MAX_ALT; ++j) {
ae = event_alternatives[i][j];
if (ae && ae != event)
alt[nalt++] = ae;
+ nlim += power5p_limited_pmc_event(ae);
}
} else {
ae = find_alternative_bdecode(event);
if (ae > 0)
alt[nalt++] = ae;
}
+
+ if (flags & PPMU_ONLY_COUNT_RUN) {
+ /*
+ * We're only counting in RUN state,
+ * so PM_CYC is equivalent to PM_RUN_CYC
+ * and PM_INST_CMPL === PM_RUN_INST_CMPL.
+ * This doesn't include alternatives that don't provide
+ * any extra flexibility in assigning PMCs (e.g.
+ * 0x100005 for PM_RUN_CYC vs. 0xf for PM_CYC).
+ * Note that even with these additional alternatives
+ * we never end up with more than 3 alternatives for any event.
+ */
+ j = nalt;
+ for (i = 0; i < nalt; ++i) {
+ switch (alt[i]) {
+ case 0xf: /* PM_CYC */
+ alt[j++] = 0x600005; /* PM_RUN_CYC */
+ ++nlim;
+ break;
+ case 0x600005: /* PM_RUN_CYC */
+ alt[j++] = 0xf;
+ break;
+ case 0x100009: /* PM_INST_CMPL */
+ alt[j++] = 0x500009; /* PM_RUN_INST_CMPL */
+ ++nlim;
+ break;
+ case 0x500009: /* PM_RUN_INST_CMPL */
+ alt[j++] = 0x100009; /* PM_INST_CMPL */
+ alt[j++] = 0x200009;
+ break;
+ }
+ }
+ nalt = j;
+ }
+
+ if (!(flags & PPMU_LIMITED_PMC_OK) && nlim) {
+ /* remove the limited PMC events */
+ j = 0;
+ for (i = 0; i < nalt; ++i) {
+ if (!power5p_limited_pmc_event(alt[i])) {
+ alt[j] = alt[i];
+ ++j;
+ }
+ }
+ nalt = j;
+ } else if ((flags & PPMU_LIMITED_PMC_REQD) && nlim < nalt) {
+ /* remove all but the limited PMC events */
+ j = 0;
+ for (i = 0; i < nalt; ++i) {
+ if (power5p_limited_pmc_event(alt[i])) {
+ alt[j] = alt[i];
+ ++j;
+ }
+ }
+ nalt = j;
+ }
+
return nalt;
}
@@ -390,7 +464,7 @@ static int power5p_compute_mmcr(unsigned int event[], int n_ev,
unsigned char unituse[16];
int ttmuse;
- if (n_ev > 4)
+ if (n_ev > 6)
return -1;
/* First pass to count resource use */
@@ -399,7 +473,7 @@ static int power5p_compute_mmcr(unsigned int event[], int n_ev,
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> PM_PMC_SH) & PM_PMC_MSK;
if (pmc) {
- if (pmc > 4)
+ if (pmc > 6)
return -1;
if (pmc_inuse & (1 << (pmc - 1)))
return -1;
@@ -488,13 +562,16 @@ static int power5p_compute_mmcr(unsigned int event[], int n_ev,
if (pmc >= 4)
return -1;
pmc_inuse |= 1 << pmc;
- } else {
+ } else if (pmc <= 4) {
/* Direct event */
--pmc;
if (isbus && (byte & 2) &&
(psel == 8 || psel == 0x10 || psel == 0x28))
/* add events on higher-numbered bus */
mmcr1 |= 1ull << (MMCR1_PMC1_ADDER_SEL_SH - pmc);
+ } else {
+ /* Instructions or run cycles on PMC5/6 */
+ --pmc;
}
if (isbus && unit == PM_GRS) {
bit = psel & 7;
@@ -538,7 +615,7 @@ static int power5p_generic_events[] = {
};
struct power_pmu power5p_pmu = {
- .n_counter = 4,
+ .n_counter = 6,
.max_alternatives = MAX_ALT,
.add_fields = 0x7000000000055ull,
.test_adder = 0x3000040000000ull,
@@ -548,4 +625,6 @@ struct power_pmu power5p_pmu = {
.disable_pmc = power5p_disable_pmc,
.n_generic = ARRAY_SIZE(power5p_generic_events),
.generic_events = power5p_generic_events,
+ .limited_pmc5_6 = 1,
+ .limited_pmc_event = power5p_limited_pmc_event,
};