summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/head_44x.S
diff options
context:
space:
mode:
authorDave Kleikamp <shaggy@linux.vnet.ibm.com>2010-03-05 10:43:07 +0000
committerJosh Boyer <jwboyer@linux.vnet.ibm.com>2010-05-05 08:04:36 -0400
commit795033c344d88dc6aa5106d0cc358656f29bd722 (patch)
tree0dd6eebb3626a093bd1e20af09c0d25925397788 /arch/powerpc/kernel/head_44x.S
parent471c70ff39809af783c7718defe574a9ba81dd26 (diff)
downloadlinux-795033c344d88dc6aa5106d0cc358656f29bd722.tar.bz2
powerpc/44x: break out cpu init code into stand-alone function
The 47x platform supports multiple cores and shares code with 44x. Break out code that is common for initializing the primary and secondary cpus into a function which can be called for both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Diffstat (limited to 'arch/powerpc/kernel/head_44x.S')
-rw-r--r--arch/powerpc/kernel/head_44x.S330
1 files changed, 171 insertions, 159 deletions
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 711368b993f2..39be049a7850 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -69,165 +69,7 @@ _ENTRY(_start);
mr r27,r7
li r24,0 /* CPU number */
-/*
- * In case the firmware didn't do it, we apply some workarounds
- * that are good for all 440 core variants here
- */
- mfspr r3,SPRN_CCR0
- rlwinm r3,r3,0,0,27 /* disable icache prefetch */
- isync
- mtspr SPRN_CCR0,r3
- isync
- sync
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from. We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- * determine which physical region we are located
- * in. This can be used to determine where in RAM
- * (on a shared CPU system) or PCI memory space
- * (on a DRAMless system) we are located.
- * For now, we assume a perfect world which means
- * we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
- /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
- mfspr r3,SPRN_PID /* Get PID */
- mfmsr r4 /* Get MSR */
- andi. r4,r4,MSR_IS@l /* TS=1? */
- beq wmmucr /* If not, leave STS=0 */
- oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
-wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
- sync
-
- bl invstr /* Find our address */
-invstr: mflr r5 /* Make it accessible */
- tlbsx r23,0,r5 /* Find entry we are in */
- li r4,0 /* Start at TLB entry 0 */
- li r3,0 /* Set PAGEID inval value */
-1: cmpw r23,r4 /* Is this our entry? */
- beq skpinv /* If so, skip the inval */
- tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
-skpinv: addi r4,r4,1 /* Increment */
- cmpwi r4,64 /* Are we done? */
- bne 1b /* If not, repeat */
- isync /* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
- lis r3,PAGE_OFFSET@h
- ori r3,r3,PAGE_OFFSET@l
-
- /* Kernel is at the base of RAM */
- li r4, 0 /* Load the kernel physical address */
-
- /* Load the kernel PID = 0 */
- li r0,0
- mtspr SPRN_PID,r0
- sync
-
- /* Initialize MMUCR */
- li r5,0
- mtspr SPRN_MMUCR,r5
- sync
-
- /* pageid fields */
- clrrwi r3,r3,10 /* Mask off the effective page number */
- ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
- /* xlat fields */
- clrrwi r4,r4,10 /* Mask off the real page number */
- /* ERPN is 0 for first 4GB page */
-
- /* attrib fields */
- /* Added guarded bit to protect against speculative loads/stores */
- li r5,0
- ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
- li r0,63 /* TLB slot 63 */
-
- tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
- tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
- tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
-
- /* Force context change */
- mfmsr r0
- mtspr SPRN_SRR1, r0
- lis r0,3f@h
- ori r0,r0,3f@l
- mtspr SPRN_SRR0,r0
- sync
- rfi
-
- /* If necessary, invalidate original entry we used */
-3: cmpwi r23,63
- beq 4f
- li r6,0
- tlbwe r6,r23,PPC44x_TLB_PAGEID
- isync
-
-4:
-#ifdef CONFIG_PPC_EARLY_DEBUG_44x
- /* Add UART mapping for early debug. */
-
- /* pageid fields */
- lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
- ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
-
- /* xlat fields */
- lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
- ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
-
- /* attrib fields */
- li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
- li r0,62 /* TLB slot 0 */
-
- tlbwe r3,r0,PPC44x_TLB_PAGEID
- tlbwe r4,r0,PPC44x_TLB_XLAT
- tlbwe r5,r0,PPC44x_TLB_ATTRIB
-
- /* Force context change */
- isync
-#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
-
- /* Establish the interrupt vector offsets */
- SET_IVOR(0, CriticalInput);
- SET_IVOR(1, MachineCheck);
- SET_IVOR(2, DataStorage);
- SET_IVOR(3, InstructionStorage);
- SET_IVOR(4, ExternalInput);
- SET_IVOR(5, Alignment);
- SET_IVOR(6, Program);
- SET_IVOR(7, FloatingPointUnavailable);
- SET_IVOR(8, SystemCall);
- SET_IVOR(9, AuxillaryProcessorUnavailable);
- SET_IVOR(10, Decrementer);
- SET_IVOR(11, FixedIntervalTimer);
- SET_IVOR(12, WatchdogTimer);
- SET_IVOR(13, DataTLBError);
- SET_IVOR(14, InstructionTLBError);
- SET_IVOR(15, DebugCrit);
-
- /* Establish the interrupt vector base */
- lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
- mtspr SPRN_IVPR,r4
+ bl init_cpu_state
/*
* This is where the main kernel code starts.
@@ -647,6 +489,176 @@ _GLOBAL(set_context)
blr
/*
+ * Init CPU state. This is called at boot time or for secondary CPUs
+ * to setup initial TLB entries, setup IVORs, etc...
+ */
+_GLOBAL(init_cpu_state)
+ mflr r22
+/*
+ * In case the firmware didn't do it, we apply some workarounds
+ * that are good for all 440 core variants here
+ */
+ mfspr r3,SPRN_CCR0
+ rlwinm r3,r3,0,0,27 /* disable icache prefetch */
+ isync
+ mtspr SPRN_CCR0,r3
+ isync
+ sync
+
+/*
+ * Set up the initial MMU state
+ *
+ * We are still executing code at the virtual address
+ * mappings set by the firmware for the base of RAM.
+ *
+ * We first invalidate all TLB entries but the one
+ * we are running from. We then load the KERNELBASE
+ * mappings so we can begin to use kernel addresses
+ * natively and so the interrupt vector locations are
+ * permanently pinned (necessary since Book E
+ * implementations always have translation enabled).
+ *
+ * TODO: Use the known TLB entry we are running from to
+ * determine which physical region we are located
+ * in. This can be used to determine where in RAM
+ * (on a shared CPU system) or PCI memory space
+ * (on a DRAMless system) we are located.
+ * For now, we assume a perfect world which means
+ * we are located at the base of DRAM (physical 0).
+ */
+
+/*
+ * Search TLB for entry that we are currently using.
+ * Invalidate all entries but the one we are using.
+ */
+ /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
+ mfspr r3,SPRN_PID /* Get PID */
+ mfmsr r4 /* Get MSR */
+ andi. r4,r4,MSR_IS@l /* TS=1? */
+ beq wmmucr /* If not, leave STS=0 */
+ oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */
+wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */
+ sync
+
+ bl invstr /* Find our address */
+invstr: mflr r5 /* Make it accessible */
+ tlbsx r23,0,r5 /* Find entry we are in */
+ li r4,0 /* Start at TLB entry 0 */
+ li r3,0 /* Set PAGEID inval value */
+1: cmpw r23,r4 /* Is this our entry? */
+ beq skpinv /* If so, skip the inval */
+ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */
+skpinv: addi r4,r4,1 /* Increment */
+ cmpwi r4,64 /* Are we done? */
+ bne 1b /* If not, repeat */
+ isync /* If so, context change */
+
+/*
+ * Configure and load pinned entry into TLB slot 63.
+ */
+
+ lis r3,PAGE_OFFSET@h
+ ori r3,r3,PAGE_OFFSET@l
+
+ /* Kernel is at the base of RAM */
+ li r4, 0 /* Load the kernel physical address */
+
+ /* Load the kernel PID = 0 */
+ li r0,0
+ mtspr SPRN_PID,r0
+ sync
+
+ /* Initialize MMUCR */
+ li r5,0
+ mtspr SPRN_MMUCR,r5
+ sync
+
+ /* pageid fields */
+ clrrwi r3,r3,10 /* Mask off the effective page number */
+ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
+
+ /* xlat fields */
+ clrrwi r4,r4,10 /* Mask off the real page number */
+ /* ERPN is 0 for first 4GB page */
+
+ /* attrib fields */
+ /* Added guarded bit to protect against speculative loads/stores */
+ li r5,0
+ ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+ li r0,63 /* TLB slot 63 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */
+ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */
+
+ /* Force context change */
+ mfmsr r0
+ mtspr SPRN_SRR1, r0
+ lis r0,3f@h
+ ori r0,r0,3f@l
+ mtspr SPRN_SRR0,r0
+ sync
+ rfi
+
+ /* If necessary, invalidate original entry we used */
+3: cmpwi r23,63
+ beq 4f
+ li r6,0
+ tlbwe r6,r23,PPC44x_TLB_PAGEID
+ isync
+
+4:
+#ifdef CONFIG_PPC_EARLY_DEBUG_44x
+ /* Add UART mapping for early debug. */
+
+ /* pageid fields */
+ lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h
+ ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K
+
+ /* xlat fields */
+ lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h
+ ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH
+
+ /* attrib fields */
+ li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G)
+ li r0,62 /* TLB slot 0 */
+
+ tlbwe r3,r0,PPC44x_TLB_PAGEID
+ tlbwe r4,r0,PPC44x_TLB_XLAT
+ tlbwe r5,r0,PPC44x_TLB_ATTRIB
+
+ /* Force context change */
+ isync
+#endif /* CONFIG_PPC_EARLY_DEBUG_44x */
+
+ /* Establish the interrupt vector offsets */
+ SET_IVOR(0, CriticalInput);
+ SET_IVOR(1, MachineCheck);
+ SET_IVOR(2, DataStorage);
+ SET_IVOR(3, InstructionStorage);
+ SET_IVOR(4, ExternalInput);
+ SET_IVOR(5, Alignment);
+ SET_IVOR(6, Program);
+ SET_IVOR(7, FloatingPointUnavailable);
+ SET_IVOR(8, SystemCall);
+ SET_IVOR(9, AuxillaryProcessorUnavailable);
+ SET_IVOR(10, Decrementer);
+ SET_IVOR(11, FixedIntervalTimer);
+ SET_IVOR(12, WatchdogTimer);
+ SET_IVOR(13, DataTLBError);
+ SET_IVOR(14, InstructionTLBError);
+ SET_IVOR(15, DebugCrit);
+
+ /* Establish the interrupt vector base */
+ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */
+ mtspr SPRN_IVPR,r4
+
+ addis r22,r22,KERNELBASE@h
+ mtlr r22
+ blr
+
+/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
*/