powerpc/64: Enable use of radix MMU under hypervisor on POWER9

To use radix as a guest, we first need to tell the hypervisor via
the ibm,client-architecture call first that we support POWER9 and
architecture v3.00, and that we can do either radix or hash and
that we would like to choose later using an hcall (the
H_REGISTER_PROC_TBL hcall).

Then we need to check whether the hypervisor agreed to us using
radix.  We need to do this very early on in the kernel boot process
before any of the MMU initialization is done.  If the hypervisor
doesn't agree, we can't use radix and therefore clear the radix
MMU feature bit.

Later, when we have set up our process table, which points to the
radix tree for each process, we need to install that using the
H_REGISTER_PROC_TBL hcall.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

3 files changed, 26 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index 8afb0e00f7d9..cea522c3bcae 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -138,5 +138,11 @@ static inline void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 extern int (*register_process_table)(unsigned long base, unsigned long page_size,
 				     unsigned long tbl_size);
 
+#ifdef CONFIG_PPC_PSERIES
+extern void radix_init_pseries(void);
+#else
+static inline void radix_init_pseries(void) { };
+#endif
+
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_MMU_H_ */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index 77ff1ba99d1f..54d11b3a6bf7 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -276,6 +276,7 @@
 #define H_GET_MPP_X		0x314
 #define H_SET_MODE		0x31C
 #define H_CLEAR_HPT		0x358
+#define H_REGISTER_PROC_TBL	0x37C
 #define H_SIGNAL_SYS_RESET	0x380
 #define MAX_HCALL_OPCODE	H_SIGNAL_SYS_RESET
 
@@ -313,6 +314,16 @@
 #define H_SIGNAL_SYS_RESET_ALL_OTHERS		-2
 /* >= 0 values are CPU number */
 
+/* Flag values used in H_REGISTER_PROC_TBL hcall */
+#define PROC_TABLE_OP_MASK	0x18
+#define PROC_TABLE_DEREG	0x10
+#define PROC_TABLE_NEW		0x18
+#define PROC_TABLE_TYPE_MASK	0x06
+#define PROC_TABLE_HPT_SLB	0x00
+#define PROC_TABLE_HPT_PT	0x02
+#define PROC_TABLE_RADIX	0x04
+#define PROC_TABLE_GTSE		0x01
+
 #ifndef __ASSEMBLY__
 
 /**
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index e6d83d0fada7..8af2546ea593 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -121,6 +121,8 @@ struct of_drconf_cell {
 #define OV1_PPC_2_06		0x02	/* set if we support PowerPC 2.06 */
 #define OV1_PPC_2_07		0x01	/* set if we support PowerPC 2.07 */
 
+#define OV1_PPC_3_00		0x80	/* set if we support PowerPC 3.00 */
+
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
 
@@ -155,6 +157,13 @@ struct of_drconf_cell {
 #define OV5_PFO_HW_842		0x1140	/* PFO Compression Accelerator */
 #define OV5_PFO_HW_ENCR		0x1120	/* PFO Encryption Accelerator */
 #define OV5_SUB_PROCESSORS	0x1501	/* 1,2,or 4 Sub-Processors supported */
+#define OV5_XIVE_EXPLOIT	0x1701	/* XIVE exploitation supported */
+#define OV5_MMU_RADIX_300	0x1880	/* ISA v3.00 radix MMU supported */
+#define OV5_MMU_HASH_300	0x1840	/* ISA v3.00 hash MMU supported */
+#define OV5_MMU_SEGM_RADIX	0x1820	/* radix mode (no segmentation) */
+#define OV5_MMU_PROC_TBL	0x1810	/* hcall selects SLB or proc table */
+#define OV5_MMU_SLB		0x1800	/* always use SLB */
+#define OV5_MMU_GTSE		0x1808	/* Guest translation shootdown */
 
 /* Option Vector 6: IBM PAPR hints */
 #define OV6_LINUX		0x02	/* Linux is our OS */