powerpc: Move include files to arch/powerpc/include/asm

from include/asm-powerpc.  This is the result of a

mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm

Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly.  Of the latter only
one was outside the arch code and it is a driver only built for powerpc.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 42 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 000000000000..e8ea346b21d3
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */