summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/include/asm/reg_8xx.h
diff options
context:
space:
mode:
authorStephen Rothwell <sfr@canb.auug.org.au>2008-08-01 15:20:30 +1000
committerPaul Mackerras <paulus@samba.org>2008-08-04 12:02:00 +1000
commitb8b572e1015f81b4e748417be2629dfe51ab99f9 (patch)
tree7df58667d5ed71d6c8f8f4ce40ca16b6fb776d0b /arch/powerpc/include/asm/reg_8xx.h
parent2b12a4c524812fb3f6ee590a02e65b95c8c32229 (diff)
downloadlinux-b8b572e1015f81b4e748417be2629dfe51ab99f9.tar.bz2
powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc. This is the result of a mkdir arch/powerpc/include/asm git mv include/asm-powerpc/* arch/powerpc/include/asm Followed by a few documentation/comment fixups and a couple of places where <asm-powepc/...> was being used explicitly. Of the latter only one was outside the arch code and it is a driver only built for powerpc. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/include/asm/reg_8xx.h')
-rw-r--r--arch/powerpc/include/asm/reg_8xx.h42
1 files changed, 42 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 000000000000..e8ea346b21d3
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs. Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST 560 /* Instruction cache control/status */
+#define SPRN_IC_ADR 561 /* Address needed for some commands */
+#define SPRN_IC_DAT 562 /* Read-only data register */
+#define SPRN_DC_CST 568 /* Data cache control/status */
+#define SPRN_DC_ADR 569 /* Address needed for some commands */
+#define SPRN_DC_DAT 570 /* Read-only data register */
+
+/* Commands. Only the first few are available to the instruction cache.
+*/
+#define IDC_ENABLE 0x02000000 /* Cache enable */
+#define IDC_DISABLE 0x04000000 /* Cache disable */
+#define IDC_LDLCK 0x06000000 /* Load and lock */
+#define IDC_UNLINE 0x08000000 /* Unlock line */
+#define IDC_UNALL 0x0a000000 /* Unlock all */
+#define IDC_INVALL 0x0c000000 /* Invalidate all */
+
+#define DC_FLINE 0x0e000000 /* Flush data cache line */
+#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
+#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
+#define DC_SLES 0x05000000 /* Set little endian swap mode */
+#define DC_CLES 0x07000000 /* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED 0x80000000 /* Cache is enabled */
+#define IDC_CERR1 0x00200000 /* Cache error 1 */
+#define IDC_CERR2 0x00100000 /* Cache error 2 */
+#define IDC_CERR3 0x00080000 /* Cache error 3 */
+
+#define DC_DFWT 0x40000000 /* Data cache is forced write through */
+#define DC_LES 0x20000000 /* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */