diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2008-08-01 15:20:30 +1000 |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2008-08-04 12:02:00 +1000 |
commit | b8b572e1015f81b4e748417be2629dfe51ab99f9 (patch) | |
tree | 7df58667d5ed71d6c8f8f4ce40ca16b6fb776d0b /arch/powerpc/include/asm/io.h | |
parent | 2b12a4c524812fb3f6ee590a02e65b95c8c32229 (diff) | |
download | linux-b8b572e1015f81b4e748417be2629dfe51ab99f9.tar.bz2 |
powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc. This is the result of a
mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm
Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/include/asm/io.h')
-rw-r--r-- | arch/powerpc/include/asm/io.h | 787 |
1 files changed, 787 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h new file mode 100644 index 000000000000..77c7fa025e65 --- /dev/null +++ b/arch/powerpc/include/asm/io.h @@ -0,0 +1,787 @@ +#ifndef _ASM_POWERPC_IO_H +#define _ASM_POWERPC_IO_H +#ifdef __KERNEL__ + +/* + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Check of existence of legacy devices */ +extern int check_legacy_ioport(unsigned long base_port); +#define I8042_DATA_REG 0x60 +#define FDC_BASE 0x3f0 +/* only relevant for PReP */ +#define _PIDXR 0x279 +#define _PNPWRP 0xa79 +#define PNPBIOS_BASE 0xf000 + +#include <linux/device.h> +#include <linux/io.h> + +#include <linux/compiler.h> +#include <asm/page.h> +#include <asm/byteorder.h> +#include <asm/synch.h> +#include <asm/delay.h> +#include <asm/mmu.h> + +#include <asm-generic/iomap.h> + +#ifdef CONFIG_PPC64 +#include <asm/paca.h> +#endif + +#define SIO_CONFIG_RA 0x398 +#define SIO_CONFIG_RD 0x399 + +#define SLOW_DOWN_IO + +/* 32 bits uses slightly different variables for the various IO + * bases. Most of this file only uses _IO_BASE though which we + * define properly based on the platform + */ +#ifndef CONFIG_PCI +#define _IO_BASE 0 +#define _ISA_MEM_BASE 0 +#define PCI_DRAM_OFFSET 0 +#elif defined(CONFIG_PPC32) +#define _IO_BASE isa_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET pci_dram_offset +#else +#define _IO_BASE pci_io_base +#define _ISA_MEM_BASE isa_mem_base +#define PCI_DRAM_OFFSET 0 +#endif + +extern unsigned long isa_io_base; +extern unsigned long pci_io_base; +extern unsigned long pci_dram_offset; + +extern resource_size_t isa_mem_base; + +#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO) +#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits +#endif + +/* + * + * Low level MMIO accessors + * + * This provides the non-bus specific accessors to MMIO. Those are PowerPC + * specific and thus shouldn't be used in generic code. The accessors + * provided here are: + * + * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64 + * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64 + * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns + * + * Those operate directly on a kernel virtual address. Note that the prototype + * for the out_* accessors has the arguments in opposite order from the usual + * linux PCI accessors. Unlike those, they take the address first and the value + * next. + * + * Note: I might drop the _ns suffix on the stream operations soon as it is + * simply normal for stream operations to not swap in the first place. + * + */ + +#ifdef CONFIG_PPC64 +#define IO_SET_SYNC_FLAG() do { local_paca->io_sync = 1; } while(0) +#else +#define IO_SET_SYNC_FLAG() +#endif + +/* gcc 4.0 and older doesn't have 'Z' constraint */ +#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0) +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync" \ + : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,0,%2" \ + : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#else /* newer gcc */ +#define DEF_MMIO_IN_LE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \ + : "=r" (ret) : "Z" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_LE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn" %1,%y0" \ + : "=Z" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} +#endif + +#define DEF_MMIO_IN_BE(name, size, insn) \ +static inline u##size name(const volatile u##size __iomem *addr) \ +{ \ + u##size ret; \ + __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\ + : "=r" (ret) : "m" (*addr) : "memory"); \ + return ret; \ +} + +#define DEF_MMIO_OUT_BE(name, size, insn) \ +static inline void name(volatile u##size __iomem *addr, u##size val) \ +{ \ + __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \ + : "=m" (*addr) : "r" (val) : "memory"); \ + IO_SET_SYNC_FLAG(); \ +} + + +DEF_MMIO_IN_BE(in_8, 8, lbz); +DEF_MMIO_IN_BE(in_be16, 16, lhz); +DEF_MMIO_IN_BE(in_be32, 32, lwz); +DEF_MMIO_IN_LE(in_le16, 16, lhbrx); +DEF_MMIO_IN_LE(in_le32, 32, lwbrx); + +DEF_MMIO_OUT_BE(out_8, 8, stb); +DEF_MMIO_OUT_BE(out_be16, 16, sth); +DEF_MMIO_OUT_BE(out_be32, 32, stw); +DEF_MMIO_OUT_LE(out_le16, 16, sthbrx); +DEF_MMIO_OUT_LE(out_le32, 32, stwbrx); + +#ifdef __powerpc64__ +DEF_MMIO_OUT_BE(out_be64, 64, std); +DEF_MMIO_IN_BE(in_be64, 64, ld); + +/* There is no asm instructions for 64 bits reverse loads and stores */ +static inline u64 in_le64(const volatile u64 __iomem *addr) +{ + return swab64(in_be64(addr)); +} + +static inline void out_le64(volatile u64 __iomem *addr, u64 val) +{ + out_be64(addr, swab64(val)); +} +#endif /* __powerpc64__ */ + +/* + * Low level IO stream instructions are defined out of line for now + */ +extern void _insb(const volatile u8 __iomem *addr, void *buf, long count); +extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count); +extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count); +extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count); +extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count); +extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count); + +/* The _ns naming is historical and will be removed. For now, just #define + * the non _ns equivalent names + */ +#define _insw _insw_ns +#define _insl _insl_ns +#define _outsw _outsw_ns +#define _outsl _outsl_ns + + +/* + * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line + */ + +extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n); +extern void _memcpy_fromio(void *dest, const volatile void __iomem *src, + unsigned long n); +extern void _memcpy_toio(volatile void __iomem *dest, const void *src, + unsigned long n); + +/* + * + * PCI and standard ISA accessors + * + * Those are globally defined linux accessors for devices on PCI or ISA + * busses. They follow the Linux defined semantics. The current implementation + * for PowerPC is as close as possible to the x86 version of these, and thus + * provides fairly heavy weight barriers for the non-raw versions + * + * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO + * allowing the platform to provide its own implementation of some or all + * of the accessors. + */ + +/* + * Include the EEH definitions when EEH is enabled only so they don't get + * in the way when building for 32 bits + */ +#ifdef CONFIG_EEH +#include <asm/eeh.h> +#endif + +/* Shortcut to the MMIO argument pointer */ +#define PCI_IO_ADDR volatile void __iomem * + +/* Indirect IO address tokens: + * + * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks + * on all IOs. (Note that this is all 64 bits only for now) + * + * To help platforms who may need to differenciate MMIO addresses in + * their hooks, a bitfield is reserved for use by the platform near the + * top of MMIO addresses (not PIO, those have to cope the hard way). + * + * This bit field is 12 bits and is at the top of the IO virtual + * addresses PCI_IO_INDIRECT_TOKEN_MASK. + * + * The kernel virtual space is thus: + * + * 0xD000000000000000 : vmalloc + * 0xD000080000000000 : PCI PHB IO space + * 0xD000080080000000 : ioremap + * 0xD0000fffffffffff : end of ioremap region + * + * Since the top 4 bits are reserved as the region ID, we use thus + * the next 12 bits and keep 4 bits available for the future if the + * virtual address space is ever to be extended. + * + * The direct IO mapping operations will then mask off those bits + * before doing the actual access, though that only happen when + * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that + * mechanism + */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define PCI_IO_IND_TOKEN_MASK 0x0fff000000000000ul +#define PCI_IO_IND_TOKEN_SHIFT 48 +#define PCI_FIX_ADDR(addr) \ + ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK)) +#define PCI_GET_ADDR_TOKEN(addr) \ + (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \ + PCI_IO_IND_TOKEN_SHIFT) +#define PCI_SET_ADDR_TOKEN(addr, token) \ +do { \ + unsigned long __a = (unsigned long)(addr); \ + __a &= ~PCI_IO_IND_TOKEN_MASK; \ + __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \ + (addr) = (void __iomem *)__a; \ +} while(0) +#else +#define PCI_FIX_ADDR(addr) (addr) +#endif + + +/* + * Non ordered and non-swapping "raw" accessors + */ + +static inline unsigned char __raw_readb(const volatile void __iomem *addr) +{ + return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned short __raw_readw(const volatile void __iomem *addr) +{ + return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr); +} +static inline unsigned int __raw_readl(const volatile void __iomem *addr) +{ + return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr) +{ + *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writew(unsigned short v, volatile void __iomem *addr) +{ + *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v; +} +static inline void __raw_writel(unsigned int v, volatile void __iomem *addr) +{ + *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v; +} + +#ifdef __powerpc64__ +static inline unsigned long __raw_readq(const volatile void __iomem *addr) +{ + return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr); +} +static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr) +{ + *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v; +} +#endif /* __powerpc64__ */ + +/* + * + * PCI PIO and MMIO accessors. + * + * + * On 32 bits, PIO operations have a recovery mechanism in case they trigger + * machine checks (which they occasionally do when probing non existing + * IO ports on some platforms, like PowerMac and 8xx). + * I always found it to be of dubious reliability and I am tempted to get + * rid of it one of these days. So if you think it's important to keep it, + * please voice up asap. We never had it for 64 bits and I do not intend + * to port it over + */ + +#ifdef CONFIG_PPC32 + +#define __do_in_asm(name, op) \ +static inline unsigned int name(unsigned int port) \ +{ \ + unsigned int x; \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: twi 0,%0,0\n" \ + "2: isync\n" \ + "3: nop\n" \ + "4:\n" \ + ".section .fixup,\"ax\"\n" \ + "5: li %0,-1\n" \ + " b 4b\n" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,5b\n" \ + " .long 1b,5b\n" \ + " .long 2b,5b\n" \ + " .long 3b,5b\n" \ + ".previous" \ + : "=&r" (x) \ + : "r" (port + _IO_BASE) \ + : "memory"); \ + return x; \ +} + +#define __do_out_asm(name, op) \ +static inline void name(unsigned int val, unsigned int port) \ +{ \ + __asm__ __volatile__( \ + "sync\n" \ + "0:" op " %0,0,%1\n" \ + "1: sync\n" \ + "2:\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 0b,2b\n" \ + " .long 1b,2b\n" \ + ".previous" \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ +} + +__do_in_asm(_rec_inb, "lbzx") +__do_in_asm(_rec_inw, "lhbrx") +__do_in_asm(_rec_inl, "lwbrx") +__do_out_asm(_rec_outb, "stbx") +__do_out_asm(_rec_outw, "sthbrx") +__do_out_asm(_rec_outl, "stwbrx") + +#endif /* CONFIG_PPC32 */ + +/* The "__do_*" operations below provide the actual "base" implementation + * for each of the defined acccessor. Some of them use the out_* functions + * directly, some of them still use EEH, though we might change that in the + * future. Those macros below provide the necessary argument swapping and + * handling of the IO base for PIO. + * + * They are themselves used by the macros that define the actual accessors + * and can be used by the hooks if any. + * + * Note that PIO operations are always defined in terms of their corresonding + * MMIO operations. That allows platforms like iSeries who want to modify the + * behaviour of both to only hook on the MMIO version and get both. It's also + * possible to hook directly at the toplevel PIO operation if they have to + * be handled differently + */ +#define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val) +#define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val) +#define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val) +#define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val) +#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val) +#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val) +#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val) + +#ifdef CONFIG_EEH +#define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr)) +#else /* CONFIG_EEH */ +#define __do_readb(addr) in_8(PCI_FIX_ADDR(addr)) +#define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr)) +#define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr)) +#define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr)) +#define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr)) +#define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr)) +#define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr)) +#endif /* !defined(CONFIG_EEH) */ + +#ifdef CONFIG_PPC32 +#define __do_outb(val, port) _rec_outb(val, port) +#define __do_outw(val, port) _rec_outw(val, port) +#define __do_outl(val, port) _rec_outl(val, port) +#define __do_inb(port) _rec_inb(port) +#define __do_inw(port) _rec_inw(port) +#define __do_inl(port) _rec_inl(port) +#else /* CONFIG_PPC32 */ +#define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port); +#define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port); +#define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port); +#endif /* !CONFIG_PPC32 */ + +#ifdef CONFIG_EEH +#define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n)) +#else /* CONFIG_EEH */ +#define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n)) +#define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n)) +#endif /* !CONFIG_EEH */ +#define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n)) +#define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n)) + +#define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n)) +#define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) +#define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n)) + +#define __do_memset_io(addr, c, n) \ + _memset_io(PCI_FIX_ADDR(addr), c, n) +#define __do_memcpy_toio(dst, src, n) \ + _memcpy_toio(PCI_FIX_ADDR(dst), src, n) + +#ifdef CONFIG_EEH +#define __do_memcpy_fromio(dst, src, n) \ + eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n) +#else /* CONFIG_EEH */ +#define __do_memcpy_fromio(dst, src, n) \ + _memcpy_fromio(dst,PCI_FIX_ADDR(src),n) +#endif /* !CONFIG_EEH */ + +#ifdef CONFIG_PPC_INDIRECT_IO +#define DEF_PCI_HOOK(x) x +#else +#define DEF_PCI_HOOK(x) NULL +#endif + +/* Structure containing all the hooks */ +extern struct ppc_pci_io { + +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at; +#define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at; + +#include <asm/io-defs.h> + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +} ppc_pci_io; + +/* The inline wrappers */ +#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \ +static inline ret name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + return ppc_pci_io.name al; \ + return __do_##name al; \ +} + +#define DEF_PCI_AC_NORET(name, at, al, space, aa) \ +static inline void name at \ +{ \ + if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL) \ + ppc_pci_io.name al; \ + else \ + __do_##name al; \ +} + +#include <asm/io-defs.h> + +#undef DEF_PCI_AC_RET +#undef DEF_PCI_AC_NORET + +/* Some drivers check for the presence of readq & writeq with + * a #ifdef, so we make them happy here. + */ +#ifdef __powerpc64__ +#define readq readq +#define writeq writeq +#endif + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +/* + * We don't do relaxed operations yet, at least not with this semantic + */ +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define readq_relaxed(addr) readq(addr) + +#ifdef CONFIG_PPC32 +#define mmiowb() +#else +/* + * Enforce synchronisation of stores vs. spin_unlock + * (this does it explicitly, though our implementation of spin_unlock + * does it implicitely too) + */ +static inline void mmiowb(void) +{ + unsigned long tmp; + + __asm__ __volatile__("sync; li %0,0; stb %0,%1(13)" + : "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync)) + : "memory"); +} +#endif /* !CONFIG_PPC32 */ + +static inline void iosync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} + +/* Enforce in-order execution of data I/O. + * No distinction between read/write on PPC; use eieio for all three. + * Those are fairly week though. They don't provide a barrier between + * MMIO and cacheable storage nor do they provide a barrier vs. locks, + * they only provide barriers between 2 __raw MMIO operations and + * possibly break write combining. + */ +#define iobarrier_rw() eieio() +#define iobarrier_r() eieio() +#define iobarrier_w() eieio() + + +/* + * output pause versions need a delay at least for the + * w83c105 ide controller in a p610. + */ +#define inb_p(port) inb(port) +#define outb_p(val, port) (udelay(1), outb((val), (port))) +#define inw_p(port) inw(port) +#define outw_p(val, port) (udelay(1), outw((val), (port))) +#define inl_p(port) inl(port) +#define outl_p(val, port) (udelay(1), outl((val), (port))) + + +#define IO_SPACE_LIMIT ~(0UL) + + +/** + * ioremap - map bus memory into CPU space + * @address: bus address of the memory + * @size: size of the resource to map + * + * ioremap performs a platform specific sequence of operations to + * make bus memory CPU accessible via the readb/readw/readl/writeb/ + * writew/writel functions and the other mmio helpers. The returned + * address is not guaranteed to be usable directly as a virtual + * address. + * + * We provide a few variations of it: + * + * * ioremap is the standard one and provides non-cacheable guarded mappings + * and can be hooked by the platform via ppc_md + * + * * ioremap_flags allows to specify the page flags as an argument and can + * also be hooked by the platform via ppc_md. ioremap_prot is the exact + * same thing as ioremap_flags. + * + * * ioremap_nocache is identical to ioremap + * + * * iounmap undoes such a mapping and can be hooked + * + * * __ioremap_at (and the pending __iounmap_at) are low level functions to + * create hand-made mappings for use only by the PCI code and cannot + * currently be hooked. Must be page aligned. + * + * * __ioremap is the low level implementation used by ioremap and + * ioremap_flags and cannot be hooked (but can be used by a hook on one + * of the previous ones) + * + * * __iounmap, is the low level implementation used by iounmap and cannot + * be hooked (but can be used by a hook on iounmap) + * + */ +extern void __iomem *ioremap(phys_addr_t address, unsigned long size); +extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, + unsigned long flags); +#define ioremap_nocache(addr, size) ioremap((addr), (size)) +#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) + +extern void iounmap(volatile void __iomem *addr); + +extern void __iomem *__ioremap(phys_addr_t, unsigned long size, + unsigned long flags); +extern void __iounmap(volatile void __iomem *addr); + +extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea, + unsigned long size, unsigned long flags); +extern void __iounmap_at(void *ea, unsigned long size); + +/* + * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation + * which needs some additional definitions here. They basically allow PIO + * space overall to be 1GB. This will work as long as we never try to use + * iomap to map MMIO below 1GB which should be fine on ppc64 + */ +#define HAVE_ARCH_PIO_SIZE 1 +#define PIO_OFFSET 0x00000000UL +#define PIO_MASK (FULL_IO_SIZE - 1) +#define PIO_RESERVED (FULL_IO_SIZE) + +#define mmio_read16be(addr) readw_be(addr) +#define mmio_read32be(addr) readl_be(addr) +#define mmio_write16be(val, addr) writew_be(val, addr) +#define mmio_write32be(val, addr) writel_be(val, addr) +#define mmio_insb(addr, dst, count) readsb(addr, dst, count) +#define mmio_insw(addr, dst, count) readsw(addr, dst, count) +#define mmio_insl(addr, dst, count) readsl(addr, dst, count) +#define mmio_outsb(addr, src, count) writesb(addr, src, count) +#define mmio_outsw(addr, src, count) writesw(addr, src, count) +#define mmio_outsl(addr, src, count) writesl(addr, src, count) + +/** + * virt_to_phys - map virtual addresses to physical + * @address: address to remap + * + * The returned physical address is the physical (CPU) mapping for + * the memory address given. It is only valid to use this function on + * addresses directly mapped or allocated via kmalloc. + * + * This function does not give bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline unsigned long virt_to_phys(volatile void * address) +{ + return __pa((unsigned long)address); +} + +/** + * phys_to_virt - map physical address to virtual + * @address: address to remap + * + * The returned virtual address is a current CPU mapping for + * the memory address given. It is only valid to use this function on + * addresses that have a kernel mapping + * + * This function does not handle bus mappings for DMA transfers. In + * almost all conceivable cases a device driver should not be using + * this function + */ +static inline void * phys_to_virt(unsigned long address) +{ + return (void *)__va(address); +} + +/* + * Change "struct page" to physical address. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* We do NOT want virtual merging, it would put too much pressure on + * our iommu allocator. Instead, we want drivers to be smart enough + * to coalesce sglists that happen to have been mapped in a contiguous + * way by the iommu + */ +#define BIO_VMERGE_BOUNDARY 0 + +/* + * 32 bits still uses virt_to_bus() for it's implementation of DMA + * mappings se we have to keep it defined here. We also have some old + * drivers (shame shame shame) that use bus_to_virt() and haven't been + * fixed yet so I need to define it here. + */ +#ifdef CONFIG_PPC32 + +static inline unsigned long virt_to_bus(volatile void * address) +{ + if (address == NULL) + return 0; + return __pa(address) + PCI_DRAM_OFFSET; +} + +static inline void * bus_to_virt(unsigned long address) +{ + if (address == 0) + return NULL; + return __va(address - PCI_DRAM_OFFSET); +} + +#define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET) + +#endif /* CONFIG_PPC32 */ + +/* access ports */ +#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v)) +#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v)) + +#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v)) +#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v)) + +#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v)) +#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v)) + +/* Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single read-modify-write. These + * macros can also be used to set a multiple-bit bit pattern using a mask, + * by specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#ifdef __powerpc64__ +#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set) +#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set) +#endif + +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset, + size_t size, unsigned long flags); + +#endif /* __KERNEL__ */ + +#endif /* _ASM_POWERPC_IO_H */ |