powerpc: Update all configs using savedefconfig

It looks like it's ~4 years since we updated some of these, so do a bulk
update.

Verified that the before and after generated configs are exactly the
same.

Which begs the question why update them? The answer is that it can be
confusing when the stored defconfig drifts too far from the generated
result.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

1 files changed, 2 insertions, 21 deletions

diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 551e50a0be5e..ee434375fc24 100644
--- a/arch/powerpc/configs/44x/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
@@ -1,5 +1,4 @@
 CONFIG_44x=y
-CONFIG_EXPERIMENTAL=y
 CONFIG_LOCALVERSION="-pika"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
@@ -7,7 +6,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -16,7 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_WARP=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_HZ_1000=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="ip=on"
 # CONFIG_PCI is not set
@@ -35,8 +32,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -44,21 +39,14 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_NDFC=y
 CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
-CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_ETHERNET=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_MII=y
 CONFIG_IBM_EMAC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
@@ -72,7 +60,6 @@ CONFIG_I2C_IBM_IIC=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_SENSORS_AD7414=y
 CONFIG_THERMAL=y
-CONFIG_THERMAL_HWMON=y
 CONFIG_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_MON=y
@@ -83,14 +70,12 @@ CONFIG_MMC=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_GPIO_PLATFORM is not set
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
@@ -99,7 +84,6 @@ CONFIG_JFFS2_FS=y
 CONFIG_UBIFS_FS=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
@@ -110,13 +94,10 @@ CONFIG_NLS_UTF8=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_T10DIF=y
 CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set