diff options
author | Ingo Molnar <mingo@elte.hu> | 2009-04-02 16:33:42 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2009-04-02 16:33:51 +0200 |
commit | 83f2f0ed715eb15a8e13c07df479d65bbc10d8d5 (patch) | |
tree | e47d7edefa210b328f8cfba43d170fc67d6e0671 /arch/powerpc/boot/dts/pcm030.dts | |
parent | 3de46fda4c104deef17ec70f85361f5c6b84ce0e (diff) | |
parent | 4fe70410d9a219dabb47328effccae7e7f2a6e26 (diff) | |
download | linux-83f2f0ed715eb15a8e13c07df479d65bbc10d8d5.tar.bz2 |
Merge branch 'linus' into x86/urgent
Merge needed to go past commit 7ca43e756 (mm: use debug_kmap_atomic)
and fix it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/powerpc/boot/dts/pcm030.dts')
-rw-r--r-- | arch/powerpc/boot/dts/pcm030.dts | 182 |
1 files changed, 68 insertions, 114 deletions
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index be2c11ca0594..895834713894 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -19,6 +19,7 @@ compatible = "phytec,pcm030"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -29,26 +30,26 @@ reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; - d-cache-size = <0x4000>; /* L1, 16K */ - i-cache-size = <0x4000>; /* L1, 16K */ - timebase-frequency = <0>; /* From Bootloader */ - bus-frequency = <0>; /* From Bootloader */ - clock-frequency = <0>; /* From Bootloader */ + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; - reg = <0x00000000 0x04000000>; /* 64MB */ + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0x0 0xf0000000 0x0000c000>; - bus-frequency = <0>; /* From bootloader */ - system-frequency = <0>; /* From bootloader */ + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; @@ -56,87 +57,70 @@ }; mpc5200_pic: interrupt-controller@500 { - /* 5200 interrupts are encoded into two levels; */ + // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; - timer@600 { /* General Purpose Timer */ + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; - interrupts = <0x1 0x9 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { /* General Purpose Timer */ + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; - interrupts = <0x1 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 10 0>; }; - gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ + gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <2>; reg = <0x620 0x10>; - interrupts = <0x1 0xb 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; - gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <3>; reg = <0x630 0x10>; - interrupts = <0x1 0xc 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; - gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <4>; reg = <0x640 0x10>; - interrupts = <0x1 0xd 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; - gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <5>; reg = <0x650 0x10>; - interrupts = <0x1 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; - gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ + gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <6>; reg = <0x660 0x10>; - interrupts = <0x1 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; - gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ + gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <7>; reg = <0x670 0x10>; - interrupts = <0x1 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; @@ -144,40 +128,33 @@ rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; - interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 5 0 1 6 0>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; - interrupts = <0x2 0x11 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 17 0>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; - interrupts = <0x2 0x12 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 18 0>; reg = <0x980 0x80>; }; gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; - interrupts = <0x1 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio-wkup@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; - interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 8 0 0 3 0>; gpio-controller; #gpio-cells = <2>; }; @@ -185,26 +162,22 @@ spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; - interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 13 0 2 14 0>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; - interrupts = <0x2 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 6 0>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; - interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 - 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 - 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 - 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; }; xlb@1f00 { @@ -213,24 +186,19 @@ }; ac97@2000 { /* PSC1 in ac97 mode */ - device_type = "sound"; compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; - interrupts = <0x2 0x2 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ serial@2400 { /* PSC3 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; cell-index = <2>; reg = <0x2400 0x100>; - interrupts = <0x2 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 3 0>; }; /* PSC4 is ??? */ @@ -238,55 +206,44 @@ /* PSC5 is ??? */ serial@2c00 { /* PSC6 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <1>; cell-index = <5>; reg = <0x2c00 0x100>; - interrupts = <0x2 0x4 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 4 0>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; - local-mac-address = [00 00 00 00 00 00]; - interrupts = <0x2 0x5 0x0>; - interrupt-parent = <&mpc5200_pic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ - interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ - interrupt-parent = <&mpc5200_pic>; - - phy0:ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0x0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; - interrupts = <0x2 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 7 0>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; - interrupts = <0x2 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 15 0>; fsl5200-clocking; }; @@ -294,10 +251,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; - interrupts = <0x2 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 16 0>; fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; @@ -307,7 +262,7 @@ }; sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; @@ -340,22 +295,21 @@ device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <0xf0000d00 0x100>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ - 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 - 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 - 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 - - 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ - 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 - 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 - 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 8 0 2 9 0 2 10 0>; bus-range = <0 0>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; |