summaryrefslogtreecommitdiffstats
path: root/arch/mips
diff options
context:
space:
mode:
authorRalf Baechle <ralf@linux-mips.org>2007-03-24 14:26:13 +0000
committerRalf Baechle <ralf@linux-mips.org>2007-03-24 17:01:50 +0000
commit8fb303c7f1118b0a82aa08e33429adf9b5ad192c (patch)
treef0da545839b23136dd2dd167125d3c4bef920348 /arch/mips
parent41a8198f61d858bcad7ef705d5d3ec3e3a8dea4a (diff)
downloadlinux-8fb303c7f1118b0a82aa08e33429adf9b5ad192c.tar.bz2
[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r--arch/mips/mm/pg-sb1.c3
-rw-r--r--arch/mips/pci/pci-bcm1480.c2
-rw-r--r--arch/mips/pci/pci-sb1250.c2
-rw-r--r--arch/mips/sibyte/bcm1480/smp.c6
-rw-r--r--arch/mips/sibyte/swarm/setup.c18
5 files changed, 16 insertions, 15 deletions
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index fc3c7878fb45..adb37d0a30ea 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -218,8 +218,7 @@ void sb1_dma_init(void)
for (i = 0; i < DM_NUM_CHANNELS; i++) {
const u64 base_val = CPHYSADDR(&page_descr[i]) |
V_DM_DSCR_BASE_RINGSZ(1);
- volatile void *base_reg =
- IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
+ void *base_reg = IOADDR(A_DM_REGISTER(i, R_DM_DSCR_BASE));
__raw_writeq(base_val, base_reg);
__raw_writeq(base_val | M_DM_DSCR_BASE_RESET, base_reg);
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index f6774f54cd3c..d7b9e1349f6d 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -216,7 +216,7 @@ static int __init bcm1480_pcibios_init(void)
/*
* See if the PCI bus has been configured by the firmware.
*/
- reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
if (!(reg & M_BCM1480_SYS_PCI_HOST)) {
bcm1480_bus_status |= PCI_DEVICE_MODE;
} else {
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 80f5e8c4bcd4..75c1246ced5f 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -228,7 +228,7 @@ static int __init sb1250_pcibios_init(void)
/*
* See if the PCI bus has been configured by the firmware.
*/
- reg = *((volatile uint64_t *) IOADDR(A_SCD_SYSTEM_CFG));
+ reg = __raw_readq(IOADDR(A_SCD_SYSTEM_CFG));
if (!(reg & M_SYS_PCI_HOST)) {
sb1250_bus_status |= PCI_DEVICE_MODE;
} else {
diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c
index bf328277c775..6eac36d1b8c8 100644
--- a/arch/mips/sibyte/bcm1480/smp.c
+++ b/arch/mips/sibyte/bcm1480/smp.c
@@ -34,21 +34,21 @@ extern void smp_call_function_interrupt(void);
* independent of board/firmware
*/
-static volatile void *mailbox_0_set_regs[] = {
+static void *mailbox_0_set_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
};
-static volatile void *mailbox_0_clear_regs[] = {
+static void *mailbox_0_clear_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
};
-static volatile void *mailbox_0_regs[] = {
+static void *mailbox_0_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index defa1f1452ad..83572d8f3e14 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -169,17 +169,19 @@ void __init plat_mem_setup(void)
#define LEDS_PHYS MLEDS_PHYS
#endif
-#define setled(index, c) \
- ((unsigned char *)(IOADDR(LEDS_PHYS)+0x20))[(3-(index))<<3] = (c)
void setleds(char *str)
{
+ void *reg;
int i;
+
for (i = 0; i < 4; i++) {
- if (!str[i]) {
- setled(i, ' ');
- } else {
- setled(i, str[i]);
- }
+ reg = IOADDR(LEDS_PHYS) + 0x20 + ((3 - i) << 3);
+
+ if (!str[i])
+ writeb(' ', reg);
+ else
+ writeb(str[i], reg);
}
}
-#endif
+
+#endif /* LEDS_PHYS */