[MIPS] Rewrite all the assembler interrupt handlers to C.

Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 27 insertions, 10 deletions

diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 952038aa4b90..7365b4853ddb 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -19,8 +19,6 @@
 
 DEFINE_SPINLOCK(pciasic_lock);
 
-extern asmlinkage void sni_rm200_pci_handle_int(void);
-
 static void enable_pciasic_irq(unsigned int irq)
 {
 	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
@@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = {
  * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
  * button interrupts.  Later ...
  */
-void pciasic_hwint0(struct pt_regs *regs)
+static void pciasic_hwint0(struct pt_regs *regs)
 {
 	panic("Received int0 but no handler yet ...");
 }
 
 /* This interrupt was used for the com1 console on the first prototypes.  */
-void pciasic_hwint2(struct pt_regs *regs)
+static void pciasic_hwint2(struct pt_regs *regs)
 {
 	/* I think this shouldn't happen on production machines.  */
 	panic("hwint2 and no handler yet");
 }
 
 /* hwint5 is the r4k count / compare interrupt  */
-void pciasic_hwint5(struct pt_regs *regs)
+static void pciasic_hwint5(struct pt_regs *regs)
 {
 	panic("hwint5 and no handler yet");
 }
@@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x)
  *
  * The EISA_INT bit in CSITPEND is high active, all others are low active.
  */
-void pciasic_hwint1(struct pt_regs *regs)
+static void pciasic_hwint1(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	unsigned long flags;
@@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs)
 /*
  * hwint 3 should deal with the PCI A - D interrupts,
  */
-void pciasic_hwint3(struct pt_regs *regs)
+static void pciasic_hwint3(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
@@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs)
 /*
  * hwint 4 is used for only the onboard PCnet 32.
  */
-void pciasic_hwint4(struct pt_regs *regs)
+static void pciasic_hwint4(struct pt_regs *regs)
 {
 	clear_c0_status(IE_IRQ4);
 	do_IRQ(PCIMT_IRQ_ETHERNET, regs);
 	set_c0_status(IE_IRQ4);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+	static unsigned char led_cache;
+
+	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
+
+	if (pending & 0x0800)
+		pciasic_hwint1(regs);
+	else if (pending & 0x4000)
+		pciasic_hwint4(regs);
+	else if (pending & 0x2000)
+		pciasic_hwint3(regs);
+	else if (pending & 0x1000)
+		pciasic_hwint2(regs);
+	else if (pending & 0x8000)
+		pciasic_hwint5(regs);
+	else if (pending & 0x0400)
+		pciasic_hwint0(regs);
+}
+
 void __init init_pciasic(void)
 {
 	unsigned long flags;
@@ -176,8 +195,6 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	set_except_vector(0, sni_rm200_pci_handle_int);
-
 	init_i8259_irqs();			/* Integrated i8259  */
 	init_pciasic();