Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

23 files changed, 4143 insertions, 0 deletions

diff --git a/arch/mips/sibyte/cfe/Makefile b/arch/mips/sibyte/cfe/Makefile
new file mode 100644
index 000000000000..059d84a1d8a8
--- /dev/null
+++ b/arch/mips/sibyte/cfe/Makefile
@@ -0,0 +1,3 @@
+lib-y					= cfe_api.o setup.o
+lib-$(CONFIG_SMP)			+= smp.o
+lib-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= console.o
diff --git a/arch/mips/sibyte/cfe/cfe_api.c b/arch/mips/sibyte/cfe/cfe_api.c
new file mode 100644
index 000000000000..c0213605e18a
--- /dev/null
+++ b/arch/mips/sibyte/cfe/cfe_api.c
@@ -0,0 +1,502 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*  *********************************************************************
+    *
+    *  Broadcom Common Firmware Environment (CFE)
+    *
+    *  Device Function stubs			File: cfe_api.c
+    *
+    *  This module contains device function stubs (small routines to
+    *  call the standard "iocb" interface entry point to CFE).
+    *  There should be one routine here per iocb function call.
+    *
+    *  Authors:  Mitch Lichtenberg, Chris Demetriou
+    *
+    ********************************************************************* */
+
+#include "cfe_api.h"
+#include "cfe_api_int.h"
+
+/* Cast from a native pointer to a cfe_xptr_t and back.	 */
+#define XPTR_FROM_NATIVE(n)	((cfe_xptr_t) (intptr_t) (n))
+#define NATIVE_FROM_XPTR(x)	((void *) (intptr_t) (x))
+
+#ifdef CFE_API_IMPL_NAMESPACE
+#define cfe_iocb_dispatch(a)		__cfe_iocb_dispatch(a)
+#endif
+int cfe_iocb_dispatch(cfe_xiocb_t * xiocb);
+
+#if defined(CFE_API_common) || defined(CFE_API_ALL)
+/*
+ * Declare the dispatch function with args of "intptr_t".
+ * This makes sure whatever model we're compiling in
+ * puts the pointers in a single register.  For example,
+ * combining -mlong64 and -mips1 or -mips2 would lead to
+ * trouble, since the handle and IOCB pointer will be
+ * passed in two registers each, and CFE expects one.
+ */
+
+static int (*cfe_dispfunc) (intptr_t handle, intptr_t xiocb) = 0;
+static cfe_xuint_t cfe_handle = 0;
+
+int cfe_init(cfe_xuint_t handle, cfe_xuint_t ept)
+{
+	cfe_dispfunc = NATIVE_FROM_XPTR(ept);
+	cfe_handle = handle;
+	return 0;
+}
+
+int cfe_iocb_dispatch(cfe_xiocb_t * xiocb)
+{
+	if (!cfe_dispfunc)
+		return -1;
+	return (*cfe_dispfunc) ((intptr_t) cfe_handle, (intptr_t) xiocb);
+}
+#endif				/* CFE_API_common || CFE_API_ALL */
+
+#if defined(CFE_API_close) || defined(CFE_API_ALL)
+int cfe_close(int handle)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_CLOSE;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = handle;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = 0;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+
+}
+#endif				/* CFE_API_close || CFE_API_ALL */
+
+#if defined(CFE_API_cpu_start) || defined(CFE_API_ALL)
+int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t);
+	xiocb.plist.xiocb_cpuctl.cpu_number = cpu;
+	xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_START;
+	xiocb.plist.xiocb_cpuctl.gp_val = gp;
+	xiocb.plist.xiocb_cpuctl.sp_val = sp;
+	xiocb.plist.xiocb_cpuctl.a1_val = a1;
+	xiocb.plist.xiocb_cpuctl.start_addr = (long) fn;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_cpu_start || CFE_API_ALL */
+
+#if defined(CFE_API_cpu_stop) || defined(CFE_API_ALL)
+int cfe_cpu_stop(int cpu)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_CPUCTL;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_cpuctl_t);
+	xiocb.plist.xiocb_cpuctl.cpu_number = cpu;
+	xiocb.plist.xiocb_cpuctl.cpu_command = CFE_CPU_CMD_STOP;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_cpu_stop || CFE_API_ALL */
+
+#if defined(CFE_API_enumenv) || defined(CFE_API_ALL)
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_ENV_SET;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
+	xiocb.plist.xiocb_envbuf.enum_idx = idx;
+	xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
+	xiocb.plist.xiocb_envbuf.name_length = namelen;
+	xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(val);
+	xiocb.plist.xiocb_envbuf.val_length = vallen;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_enumenv || CFE_API_ALL */
+
+#if defined(CFE_API_enummem) || defined(CFE_API_ALL)
+int
+cfe_enummem(int idx, int flags, cfe_xuint_t * start, cfe_xuint_t * length,
+	    cfe_xuint_t * type)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_MEMENUM;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = flags;
+	xiocb.xiocb_psize = sizeof(xiocb_meminfo_t);
+	xiocb.plist.xiocb_meminfo.mi_idx = idx;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+
+	*start = xiocb.plist.xiocb_meminfo.mi_addr;
+	*length = xiocb.plist.xiocb_meminfo.mi_size;
+	*type = xiocb.plist.xiocb_meminfo.mi_type;
+
+	return 0;
+}
+#endif				/* CFE_API_enummem || CFE_API_ALL */
+
+#if defined(CFE_API_exit) || defined(CFE_API_ALL)
+int cfe_exit(int warm, int status)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_RESTART;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = warm ? CFE_FLG_WARMSTART : 0;
+	xiocb.xiocb_psize = sizeof(xiocb_exitstat_t);
+	xiocb.plist.xiocb_exitstat.status = status;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_exit || CFE_API_ALL */
+
+#if defined(CFE_API_flushcache) || defined(CFE_API_ALL)
+int cfe_flushcache(int flg)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_FLUSHCACHE;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = flg;
+	xiocb.xiocb_psize = 0;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_flushcache || CFE_API_ALL */
+
+#if defined(CFE_API_getdevinfo) || defined(CFE_API_ALL)
+int cfe_getdevinfo(char *name)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_GETINFO;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
+	xiocb.plist.xiocb_buffer.buf_offset = 0;
+	xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name);
+	xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name);
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.plist.xiocb_buffer.buf_devflags;
+}
+#endif				/* CFE_API_getdevinfo || CFE_API_ALL */
+
+#if defined(CFE_API_getenv) || defined(CFE_API_ALL)
+int cfe_getenv(char *name, char *dest, int destlen)
+{
+	cfe_xiocb_t xiocb;
+
+	*dest = 0;
+
+	xiocb.xiocb_fcode = CFE_CMD_ENV_GET;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
+	xiocb.plist.xiocb_envbuf.enum_idx = 0;
+	xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
+	xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name);
+	xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(dest);
+	xiocb.plist.xiocb_envbuf.val_length = destlen;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_getenv || CFE_API_ALL */
+
+#if defined(CFE_API_getfwinfo) || defined(CFE_API_ALL)
+int cfe_getfwinfo(cfe_fwinfo_t * info)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_GETINFO;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_fwinfo_t);
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+
+	info->fwi_version = xiocb.plist.xiocb_fwinfo.fwi_version;
+	info->fwi_totalmem = xiocb.plist.xiocb_fwinfo.fwi_totalmem;
+	info->fwi_flags = xiocb.plist.xiocb_fwinfo.fwi_flags;
+	info->fwi_boardid = xiocb.plist.xiocb_fwinfo.fwi_boardid;
+	info->fwi_bootarea_va = xiocb.plist.xiocb_fwinfo.fwi_bootarea_va;
+	info->fwi_bootarea_pa = xiocb.plist.xiocb_fwinfo.fwi_bootarea_pa;
+	info->fwi_bootarea_size =
+	    xiocb.plist.xiocb_fwinfo.fwi_bootarea_size;
+#if 0
+	info->fwi_reserved1 = xiocb.plist.xiocb_fwinfo.fwi_reserved1;
+	info->fwi_reserved2 = xiocb.plist.xiocb_fwinfo.fwi_reserved2;
+	info->fwi_reserved3 = xiocb.plist.xiocb_fwinfo.fwi_reserved3;
+#endif
+
+	return 0;
+}
+#endif				/* CFE_API_getfwinfo || CFE_API_ALL */
+
+#if defined(CFE_API_getstdhandle) || defined(CFE_API_ALL)
+int cfe_getstdhandle(int flg)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_GETHANDLE;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = flg;
+	xiocb.xiocb_psize = 0;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.xiocb_handle;
+}
+#endif				/* CFE_API_getstdhandle || CFE_API_ALL */
+
+#if defined(CFE_API_getticks) || defined(CFE_API_ALL)
+int64_t
+#ifdef CFE_API_IMPL_NAMESPACE
+__cfe_getticks(void)
+#else
+cfe_getticks(void)
+#endif
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_FW_GETTIME;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_time_t);
+	xiocb.plist.xiocb_time.ticks = 0;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.plist.xiocb_time.ticks;
+
+}
+#endif				/* CFE_API_getticks || CFE_API_ALL */
+
+#if defined(CFE_API_inpstat) || defined(CFE_API_ALL)
+int cfe_inpstat(int handle)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_INPSTAT;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = handle;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_inpstat_t);
+	xiocb.plist.xiocb_inpstat.inp_status = 0;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.plist.xiocb_inpstat.inp_status;
+}
+#endif				/* CFE_API_inpstat || CFE_API_ALL */
+
+#if defined(CFE_API_ioctl) || defined(CFE_API_ALL)
+int
+cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+	  int length, int *retlen, cfe_xuint_t offset)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_IOCTL;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = handle;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
+	xiocb.plist.xiocb_buffer.buf_offset = offset;
+	xiocb.plist.xiocb_buffer.buf_ioctlcmd = ioctlnum;
+	xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
+	xiocb.plist.xiocb_buffer.buf_length = length;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (retlen)
+		*retlen = xiocb.plist.xiocb_buffer.buf_retlen;
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_ioctl || CFE_API_ALL */
+
+#if defined(CFE_API_open) || defined(CFE_API_ALL)
+int cfe_open(char *name)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_OPEN;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
+	xiocb.plist.xiocb_buffer.buf_offset = 0;
+	xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(name);
+	xiocb.plist.xiocb_buffer.buf_length = cfe_strlen(name);
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.xiocb_handle;
+}
+#endif				/* CFE_API_open || CFE_API_ALL */
+
+#if defined(CFE_API_read) || defined(CFE_API_ALL)
+int cfe_read(int handle, unsigned char *buffer, int length)
+{
+	return cfe_readblk(handle, 0, buffer, length);
+}
+#endif				/* CFE_API_read || CFE_API_ALL */
+
+#if defined(CFE_API_readblk) || defined(CFE_API_ALL)
+int
+cfe_readblk(int handle, cfe_xint_t offset, unsigned char *buffer,
+	    int length)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_READ;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = handle;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
+	xiocb.plist.xiocb_buffer.buf_offset = offset;
+	xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
+	xiocb.plist.xiocb_buffer.buf_length = length;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.plist.xiocb_buffer.buf_retlen;
+}
+#endif				/* CFE_API_readblk || CFE_API_ALL */
+
+#if defined(CFE_API_setenv) || defined(CFE_API_ALL)
+int cfe_setenv(char *name, char *val)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_ENV_SET;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = 0;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_envbuf_t);
+	xiocb.plist.xiocb_envbuf.enum_idx = 0;
+	xiocb.plist.xiocb_envbuf.name_ptr = XPTR_FROM_NATIVE(name);
+	xiocb.plist.xiocb_envbuf.name_length = cfe_strlen(name);
+	xiocb.plist.xiocb_envbuf.val_ptr = XPTR_FROM_NATIVE(val);
+	xiocb.plist.xiocb_envbuf.val_length = cfe_strlen(val);
+
+	cfe_iocb_dispatch(&xiocb);
+
+	return xiocb.xiocb_status;
+}
+#endif				/* CFE_API_setenv || CFE_API_ALL */
+
+#if (defined(CFE_API_strlen) || defined(CFE_API_ALL)) \
+    && !defined(CFE_API_STRLEN_CUSTOM)
+int cfe_strlen(char *name)
+{
+	int count = 0;
+
+	while (*name++)
+		count++;
+
+	return count;
+}
+#endif				/* CFE_API_strlen || CFE_API_ALL */
+
+#if defined(CFE_API_write) || defined(CFE_API_ALL)
+int cfe_write(int handle, unsigned char *buffer, int length)
+{
+	return cfe_writeblk(handle, 0, buffer, length);
+}
+#endif				/* CFE_API_write || CFE_API_ALL */
+
+#if defined(CFE_API_writeblk) || defined(CFE_API_ALL)
+int
+cfe_writeblk(int handle, cfe_xint_t offset, unsigned char *buffer,
+	     int length)
+{
+	cfe_xiocb_t xiocb;
+
+	xiocb.xiocb_fcode = CFE_CMD_DEV_WRITE;
+	xiocb.xiocb_status = 0;
+	xiocb.xiocb_handle = handle;
+	xiocb.xiocb_flags = 0;
+	xiocb.xiocb_psize = sizeof(xiocb_buffer_t);
+	xiocb.plist.xiocb_buffer.buf_offset = offset;
+	xiocb.plist.xiocb_buffer.buf_ptr = XPTR_FROM_NATIVE(buffer);
+	xiocb.plist.xiocb_buffer.buf_length = length;
+
+	cfe_iocb_dispatch(&xiocb);
+
+	if (xiocb.xiocb_status < 0)
+		return xiocb.xiocb_status;
+	return xiocb.plist.xiocb_buffer.buf_retlen;
+}
+#endif				/* CFE_API_writeblk || CFE_API_ALL */
diff --git a/arch/mips/sibyte/cfe/cfe_api.h b/arch/mips/sibyte/cfe/cfe_api.h
new file mode 100644
index 000000000000..d8230cc53b81
--- /dev/null
+++ b/arch/mips/sibyte/cfe/cfe_api.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*  *********************************************************************
+    *
+    *  Broadcom Common Firmware Environment (CFE)
+    *
+    *  Device function prototypes		File: cfe_api.h
+    *
+    *  This file contains declarations for doing callbacks to
+    *  cfe from an application.  It should be the only header
+    *  needed by the application to use this library
+    *
+    *  Authors:  Mitch Lichtenberg, Chris Demetriou
+    *
+    ********************************************************************* */
+
+#ifndef CFE_API_H
+#define CFE_API_H
+
+/*
+ * Apply customizations here for different OSes.  These need to:
+ *	* typedef uint64_t, int64_t, intptr_t, uintptr_t.
+ *	* define cfe_strlen() if use of an existing function is desired.
+ *	* define CFE_API_IMPL_NAMESPACE if API functions are to use
+ *	  names in the implementation namespace.
+ * Also, optionally, if the build environment does not do so automatically,
+ * CFE_API_* can be defined here as desired.
+ */
+/* Begin customization. */
+#include <linux/types.h>
+#include <linux/string.h>
+
+typedef long intptr_t;
+
+#define cfe_strlen strlen
+
+#define CFE_API_ALL
+#define CFE_API_STRLEN_CUSTOM
+/* End customization. */
+
+
+/*  *********************************************************************
+    *  Constants
+    ********************************************************************* */
+
+/* Seal indicating CFE's presence, passed to user program. */
+#define CFE_EPTSEAL 0x43464531
+
+#define CFE_MI_RESERVED	0	/* memory is reserved, do not use */
+#define CFE_MI_AVAILABLE 1	/* memory is available */
+
+#define CFE_FLG_WARMSTART     0x00000001
+#define CFE_FLG_FULL_ARENA    0x00000001
+#define CFE_FLG_ENV_PERMANENT 0x00000001
+
+#define CFE_CPU_CMD_START 1
+#define CFE_CPU_CMD_STOP 0
+
+#define CFE_STDHANDLE_CONSOLE	0
+
+#define CFE_DEV_NETWORK 	1
+#define CFE_DEV_DISK		2
+#define CFE_DEV_FLASH		3
+#define CFE_DEV_SERIAL		4
+#define CFE_DEV_CPU		5
+#define CFE_DEV_NVRAM		6
+#define CFE_DEV_CLOCK           7
+#define CFE_DEV_OTHER		8
+#define CFE_DEV_MASK		0x0F
+
+#define CFE_CACHE_FLUSH_D	1
+#define CFE_CACHE_INVAL_I	2
+#define CFE_CACHE_INVAL_D	4
+#define CFE_CACHE_INVAL_L2	8
+
+#define CFE_FWI_64BIT		0x00000001
+#define CFE_FWI_32BIT		0x00000002
+#define CFE_FWI_RELOC		0x00000004
+#define CFE_FWI_UNCACHED	0x00000008
+#define CFE_FWI_MULTICPU	0x00000010
+#define CFE_FWI_FUNCSIM		0x00000020
+#define CFE_FWI_RTLSIM		0x00000040
+
+typedef struct {
+	int64_t fwi_version;		/* major, minor, eco version */
+	int64_t fwi_totalmem;		/* total installed mem */
+	int64_t fwi_flags;		/* various flags */
+	int64_t fwi_boardid;		/* board ID */
+	int64_t fwi_bootarea_va;	/* VA of boot area */
+	int64_t fwi_bootarea_pa;	/* PA of boot area */
+	int64_t fwi_bootarea_size;	/* size of boot area */
+} cfe_fwinfo_t;
+
+
+/*
+ * cfe_strlen is handled specially: If already defined, it has been
+ * overridden in this environment with a standard strlen-like function.
+ */
+#ifdef cfe_strlen
+# define CFE_API_STRLEN_CUSTOM
+#else
+# ifdef CFE_API_IMPL_NAMESPACE
+#  define cfe_strlen(a)			__cfe_strlen(a)
+# endif
+int cfe_strlen(char *name);
+#endif
+
+/*
+ * Defines and prototypes for functions which take no arguments.
+ */
+#ifdef CFE_API_IMPL_NAMESPACE
+int64_t __cfe_getticks(void);
+#define cfe_getticks()			__cfe_getticks()
+#else
+int64_t cfe_getticks(void);
+#endif
+
+/*
+ * Defines and prototypes for the rest of the functions.
+ */
+#ifdef CFE_API_IMPL_NAMESPACE
+#define cfe_close(a)			__cfe_close(a)
+#define cfe_cpu_start(a,b,c,d,e)	__cfe_cpu_start(a,b,c,d,e)
+#define cfe_cpu_stop(a)			__cfe_cpu_stop(a)
+#define cfe_enumenv(a,b,d,e,f)		__cfe_enumenv(a,b,d,e,f)
+#define cfe_enummem(a,b,c,d,e)		__cfe_enummem(a,b,c,d,e)
+#define cfe_exit(a,b)			__cfe_exit(a,b)
+#define cfe_flushcache(a)		__cfe_cacheflush(a)
+#define cfe_getdevinfo(a)		__cfe_getdevinfo(a)
+#define cfe_getenv(a,b,c)		__cfe_getenv(a,b,c)
+#define cfe_getfwinfo(a)		__cfe_getfwinfo(a)
+#define cfe_getstdhandle(a)		__cfe_getstdhandle(a)
+#define cfe_init(a,b)			__cfe_init(a,b)
+#define cfe_inpstat(a)			__cfe_inpstat(a)
+#define cfe_ioctl(a,b,c,d,e,f)		__cfe_ioctl(a,b,c,d,e,f)
+#define cfe_open(a)			__cfe_open(a)
+#define cfe_read(a,b,c)			__cfe_read(a,b,c)
+#define cfe_readblk(a,b,c,d)		__cfe_readblk(a,b,c,d)
+#define cfe_setenv(a,b)			__cfe_setenv(a,b)
+#define cfe_write(a,b,c)		__cfe_write(a,b,c)
+#define cfe_writeblk(a,b,c,d)		__cfe_writeblk(a,b,c,d)
+#endif				/* CFE_API_IMPL_NAMESPACE */
+
+int cfe_close(int handle);
+int cfe_cpu_start(int cpu, void (*fn) (void), long sp, long gp, long a1);
+int cfe_cpu_stop(int cpu);
+int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen);
+int cfe_enummem(int idx, int flags, uint64_t * start, uint64_t * length,
+		uint64_t * type);
+int cfe_exit(int warm, int status);
+int cfe_flushcache(int flg);
+int cfe_getdevinfo(char *name);
+int cfe_getenv(char *name, char *dest, int destlen);
+int cfe_getfwinfo(cfe_fwinfo_t * info);
+int cfe_getstdhandle(int flg);
+int cfe_init(uint64_t handle, uint64_t ept);
+int cfe_inpstat(int handle);
+int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer,
+	      int length, int *retlen, uint64_t offset);
+int cfe_open(char *name);
+int cfe_read(int handle, unsigned char *buffer, int length);
+int cfe_readblk(int handle, int64_t offset, unsigned char *buffer,
+		int length);
+int cfe_setenv(char *name, char *val);
+int cfe_write(int handle, unsigned char *buffer, int length);
+int cfe_writeblk(int handle, int64_t offset, unsigned char *buffer,
+		 int length);
+
+#endif				/* CFE_API_H */
diff --git a/arch/mips/sibyte/cfe/cfe_api_int.h b/arch/mips/sibyte/cfe/cfe_api_int.h
new file mode 100644
index 000000000000..f7e5a64b55f3
--- /dev/null
+++ b/arch/mips/sibyte/cfe/cfe_api_int.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*  *********************************************************************
+    *
+    *  Broadcom Common Firmware Environment (CFE)
+    *
+    *  Device function prototypes		File: cfe_api_int.h
+    *
+    *  This header defines all internal types and macros for the
+    *  library.  This is stuff that's not exported to an app
+    *  using the library.
+    *
+    *  Authors:  Mitch Lichtenberg, Chris Demetriou
+    *
+    ********************************************************************* */
+
+#ifndef CFE_API_INT_H
+#define CFE_API_INT_H
+
+/*  *********************************************************************
+    *  Constants
+    ********************************************************************* */
+
+#define CFE_CMD_FW_GETINFO	0
+#define CFE_CMD_FW_RESTART	1
+#define CFE_CMD_FW_BOOT		2
+#define CFE_CMD_FW_CPUCTL	3
+#define CFE_CMD_FW_GETTIME      4
+#define CFE_CMD_FW_MEMENUM	5
+#define CFE_CMD_FW_FLUSHCACHE	6
+
+#define CFE_CMD_DEV_GETHANDLE	9
+#define CFE_CMD_DEV_ENUM	10
+#define CFE_CMD_DEV_OPEN	11
+#define CFE_CMD_DEV_INPSTAT	12
+#define CFE_CMD_DEV_READ	13
+#define CFE_CMD_DEV_WRITE	14
+#define CFE_CMD_DEV_IOCTL	15
+#define CFE_CMD_DEV_CLOSE	16
+#define CFE_CMD_DEV_GETINFO	17
+
+#define CFE_CMD_ENV_ENUM	20
+#define CFE_CMD_ENV_GET		22
+#define CFE_CMD_ENV_SET		23
+#define CFE_CMD_ENV_DEL		24
+
+#define CFE_CMD_MAX		32
+
+#define CFE_CMD_VENDOR_USE	0x8000	/* codes above this are for customer use */
+
+/*  *********************************************************************
+    *  Structures
+    ********************************************************************* */
+
+typedef uint64_t cfe_xuint_t;
+typedef int64_t cfe_xint_t;
+typedef int64_t cfe_xptr_t;
+
+typedef struct xiocb_buffer_s {
+	cfe_xuint_t buf_offset;		/* offset on device (bytes) */
+	cfe_xptr_t  buf_ptr;		/* pointer to a buffer */
+	cfe_xuint_t buf_length;		/* length of this buffer */
+	cfe_xuint_t buf_retlen;		/* returned length (for read ops) */
+	cfe_xuint_t buf_ioctlcmd;	/* IOCTL command (used only for IOCTLs) */
+} xiocb_buffer_t;
+
+#define buf_devflags buf_ioctlcmd	/* returned device info flags */
+
+typedef struct xiocb_inpstat_s {
+	cfe_xuint_t inp_status;		/* 1 means input available */
+} xiocb_inpstat_t;
+
+typedef struct xiocb_envbuf_s {
+	cfe_xint_t enum_idx;		/* 0-based enumeration index */
+	cfe_xptr_t name_ptr;		/* name string buffer */
+	cfe_xint_t name_length;		/* size of name buffer */
+	cfe_xptr_t val_ptr;		/* value string buffer */
+	cfe_xint_t val_length;		/* size of value string buffer */
+} xiocb_envbuf_t;
+
+typedef struct xiocb_cpuctl_s {
+	cfe_xuint_t cpu_number;		/* cpu number to control */
+	cfe_xuint_t cpu_command;	/* command to issue to CPU */
+	cfe_xuint_t start_addr;		/* CPU start address */
+	cfe_xuint_t gp_val;		/* starting GP value */
+	cfe_xuint_t sp_val;		/* starting SP value */
+	cfe_xuint_t a1_val;		/* starting A1 value */
+} xiocb_cpuctl_t;
+
+typedef struct xiocb_time_s {
+	cfe_xint_t ticks;		/* current time in ticks */
+} xiocb_time_t;
+
+typedef struct xiocb_exitstat_s {
+	cfe_xint_t status;
+} xiocb_exitstat_t;
+
+typedef struct xiocb_meminfo_s {
+	cfe_xint_t mi_idx;		/* 0-based enumeration index */
+	cfe_xint_t mi_type;		/* type of memory block */
+	cfe_xuint_t mi_addr;		/* physical start address */
+	cfe_xuint_t mi_size;		/* block size */
+} xiocb_meminfo_t;
+
+typedef struct xiocb_fwinfo_s {
+	cfe_xint_t fwi_version;		/* major, minor, eco version */
+	cfe_xint_t fwi_totalmem;	/* total installed mem */
+	cfe_xint_t fwi_flags;		/* various flags */
+	cfe_xint_t fwi_boardid;		/* board ID */
+	cfe_xint_t fwi_bootarea_va;	/* VA of boot area */
+	cfe_xint_t fwi_bootarea_pa;	/* PA of boot area */
+	cfe_xint_t fwi_bootarea_size;	/* size of boot area */
+	cfe_xint_t fwi_reserved1;
+	cfe_xint_t fwi_reserved2;
+	cfe_xint_t fwi_reserved3;
+} xiocb_fwinfo_t;
+
+typedef struct cfe_xiocb_s {
+	cfe_xuint_t xiocb_fcode;	/* IOCB function code */
+	cfe_xint_t xiocb_status;	/* return status */
+	cfe_xint_t xiocb_handle;	/* file/device handle */
+	cfe_xuint_t xiocb_flags;	/* flags for this IOCB */
+	cfe_xuint_t xiocb_psize;	/* size of parameter list */
+	union {
+		xiocb_buffer_t xiocb_buffer;	/* buffer parameters */
+		xiocb_inpstat_t xiocb_inpstat;	/* input status parameters */
+		xiocb_envbuf_t xiocb_envbuf;	/* environment function parameters */
+		xiocb_cpuctl_t xiocb_cpuctl;	/* CPU control parameters */
+		xiocb_time_t xiocb_time;	/* timer parameters */
+		xiocb_meminfo_t xiocb_meminfo;	/* memory arena info parameters */
+		xiocb_fwinfo_t xiocb_fwinfo;	/* firmware information */
+		xiocb_exitstat_t xiocb_exitstat;	/* Exit Status */
+	} plist;
+} cfe_xiocb_t;
+
+#endif				/* CFE_API_INT_H */
diff --git a/arch/mips/sibyte/cfe/cfe_error.h b/arch/mips/sibyte/cfe/cfe_error.h
new file mode 100644
index 000000000000..77eb4935bfb4
--- /dev/null
+++ b/arch/mips/sibyte/cfe/cfe_error.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*  *********************************************************************
+    *  
+    *  Broadcom Common Firmware Environment (CFE)
+    *  
+    *  Error codes				File: cfe_error.h
+    *  
+    *  CFE's global error code list is here.
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    ********************************************************************* */
+
+
+#define CFE_OK			 0
+#define CFE_ERR                 -1	/* generic error */
+#define CFE_ERR_INV_COMMAND	-2
+#define CFE_ERR_EOF		-3
+#define CFE_ERR_IOERR		-4
+#define CFE_ERR_NOMEM		-5
+#define CFE_ERR_DEVNOTFOUND	-6
+#define CFE_ERR_DEVOPEN		-7
+#define CFE_ERR_INV_PARAM	-8
+#define CFE_ERR_ENVNOTFOUND	-9
+#define CFE_ERR_ENVREADONLY	-10
+
+#define CFE_ERR_NOTELF		-11
+#define CFE_ERR_NOT32BIT 	-12
+#define CFE_ERR_WRONGENDIAN 	-13
+#define CFE_ERR_BADELFVERS 	-14
+#define CFE_ERR_NOTMIPS 	-15
+#define CFE_ERR_BADELFFMT 	-16
+#define CFE_ERR_BADADDR 	-17
+
+#define CFE_ERR_FILENOTFOUND	-18
+#define CFE_ERR_UNSUPPORTED	-19
+
+#define CFE_ERR_HOSTUNKNOWN	-20
+
+#define CFE_ERR_TIMEOUT		-21
+
+#define CFE_ERR_PROTOCOLERR	-22
+
+#define CFE_ERR_NETDOWN		-23
+#define CFE_ERR_NONAMESERVER	-24
+
+#define CFE_ERR_NOHANDLES	-25
+#define CFE_ERR_ALREADYBOUND	-26
+
+#define CFE_ERR_CANNOTSET	-27
+#define CFE_ERR_NOMORE		-28
+#define CFE_ERR_BADFILESYS	-29
+#define CFE_ERR_FSNOTAVAIL	-30
+
+#define CFE_ERR_INVBOOTBLOCK	-31
+#define CFE_ERR_WRONGDEVTYPE	-32
+#define CFE_ERR_BBCHECKSUM	-33
+#define CFE_ERR_BOOTPROGCHKSUM	-34
+
+#define CFE_ERR_LDRNOTAVAIL	-35
+
+#define CFE_ERR_NOTREADY	-36
+
+#define CFE_ERR_GETMEM          -37
+#define CFE_ERR_SETMEM          -38
+
+#define CFE_ERR_NOTCONN		-39
+#define CFE_ERR_ADDRINUSE	-40
diff --git a/arch/mips/sibyte/cfe/console.c b/arch/mips/sibyte/cfe/console.c
new file mode 100644
index 000000000000..53a5c1eb5611
--- /dev/null
+++ b/arch/mips/sibyte/cfe/console.c
@@ -0,0 +1,80 @@
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/console.h>
+
+#include <asm/sibyte/board.h>
+
+#include "cfe_api.h"
+#include "cfe_error.h"
+
+extern int cfe_cons_handle;
+
+static void cfe_console_write(struct console *cons, const char *str,
+		       unsigned int count)
+{
+	int i, last, written;
+
+	for (i=0,last=0; i<count; i++) {
+		if (!str[i])
+			/* XXXKW can/should this ever happen? */
+			return;
+		if (str[i] == '\n') {
+			do {
+				written = cfe_write(cfe_cons_handle, &str[last], i-last);
+				if (written < 0)
+					;
+				last += written;
+			} while (last < i);
+			while (cfe_write(cfe_cons_handle, "\r", 1) <= 0)
+				;
+		}
+	}
+	if (last != count) {
+		do {
+			written = cfe_write(cfe_cons_handle, &str[last], count-last);
+			if (written < 0)
+				;
+			last += written;
+		} while (last < count);
+	}
+			
+}
+
+static int cfe_console_setup(struct console *cons, char *str)
+{
+	char consdev[32];
+	/* XXXKW think about interaction with 'console=' cmdline arg */
+	/* If none of the console options are configured, the build will break. */
+	if (cfe_getenv("BOOT_CONSOLE", consdev, 32) >= 0) {
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+		if (!strcmp(consdev, "uart0")) {
+			setleds("u0cn");
+		} else if (!strcmp(consdev, "uart1")) {
+			setleds("u1cn");
+#endif
+#ifdef CONFIG_VGA_CONSOLE
+		} else if (!strcmp(consdev, "pcconsole0")) {
+			setleds("pccn");
+#endif
+		} else
+			return -ENODEV;
+	}
+	return 0;
+}
+
+static struct console sb1250_cfe_cons = {
+	.name		= "cfe",
+	.write		= cfe_console_write,
+	.setup		= cfe_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+};
+
+static int __init sb1250_cfe_console_init(void)
+{
+	register_console(&sb1250_cfe_cons);
+	return 0;
+}
+
+console_initcall(sb1250_cfe_console_init);
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
new file mode 100644
index 000000000000..d6d0364fa760
--- /dev/null
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -0,0 +1,358 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/linkage.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/bootmem.h>
+#include <linux/smp.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/sibyte/board.h>
+
+#include "cfe_api.h"
+#include "cfe_error.h"
+
+/* Max ram addressable in 32-bit segments */
+#ifdef CONFIG_MIPS64
+#define MAX_RAM_SIZE (~0ULL)
+#else
+#ifdef CONFIG_HIGHMEM
+#ifdef CONFIG_64BIT_PHYS_ADDR
+#define MAX_RAM_SIZE (~0ULL)
+#else
+#define MAX_RAM_SIZE (0xffffffffULL)
+#endif
+#else
+#define MAX_RAM_SIZE (0x1fffffffULL)
+#endif
+#endif
+
+#define SIBYTE_MAX_MEM_REGIONS 8
+phys_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS];
+phys_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS];
+unsigned int board_mem_region_count;
+
+int cfe_cons_handle;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+extern unsigned long initrd_start, initrd_end;
+#endif
+
+#ifdef CONFIG_KGDB
+extern int kgdb_port;
+#endif
+
+static void ATTRIB_NORET cfe_linux_exit(void *arg)
+{
+	int warm = *(int *)arg;
+
+	if (smp_processor_id()) {
+		static int reboot_smp;
+
+		/* Don't repeat the process from another CPU */
+		if (!reboot_smp) {
+			/* Get CPU 0 to do the cfe_exit */
+			reboot_smp = 1;
+			smp_call_function(cfe_linux_exit, arg, 1, 0);
+		}
+	} else {
+		printk("Passing control back to CFE...\n");
+		cfe_exit(warm, 0);
+		printk("cfe_exit returned??\n");
+	}
+	while (1);
+}
+
+static void ATTRIB_NORET cfe_linux_restart(char *command)
+{
+	static const int zero;
+
+	cfe_linux_exit((void *)&zero);
+}
+
+static void ATTRIB_NORET cfe_linux_halt(void)
+{
+	static const int one = 1;
+
+	cfe_linux_exit((void *)&one);
+}
+
+static __init void prom_meminit(void)
+{
+	u64 addr, size, type; /* regardless of 64BIT_PHYS_ADDR */
+	int mem_flags = 0;
+	unsigned int idx;
+	int rd_flag;
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long initrd_pstart;
+	unsigned long initrd_pend;
+
+	initrd_pstart = CPHYSADDR(initrd_start);
+	initrd_pend = CPHYSADDR(initrd_end);
+	if (initrd_start &&
+	    ((initrd_pstart > MAX_RAM_SIZE)
+	     || (initrd_pend > MAX_RAM_SIZE))) {
+		panic("initrd out of addressable memory");
+	}
+
+#endif /* INITRD */
+
+	for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE;
+	     idx++) {
+		rd_flag = 0;
+		if (type == CFE_MI_AVAILABLE) {
+			/*
+			 * See if this block contains (any portion of) the
+			 * ramdisk
+			 */
+#ifdef CONFIG_BLK_DEV_INITRD
+			if (initrd_start) {
+				if ((initrd_pstart > addr) &&
+				    (initrd_pstart < (addr + size))) {
+					add_memory_region(addr,
+					                  initrd_pstart - addr,
+					                  BOOT_MEM_RAM);
+					rd_flag = 1;
+				}
+				if ((initrd_pend > addr) &&
+				    (initrd_pend < (addr + size))) {
+					add_memory_region(initrd_pend,
+						(addr + size) - initrd_pend,
+						 BOOT_MEM_RAM);
+					rd_flag = 1;
+				}
+			}
+#endif
+			if (!rd_flag) {
+				if (addr > MAX_RAM_SIZE)
+					continue;
+				if (addr+size > MAX_RAM_SIZE)
+					size = MAX_RAM_SIZE - (addr+size) + 1;
+				/*
+				 * memcpy/__copy_user prefetch, which
+				 * will cause a bus error for
+				 * KSEG/KUSEG addrs not backed by RAM.
+				 * Hence, reserve some padding for the
+				 * prefetch distance.
+				 */
+				if (size > 512)
+					size -= 512;
+				add_memory_region(addr, size, BOOT_MEM_RAM);
+			}
+			board_mem_region_addrs[board_mem_region_count] = addr;
+			board_mem_region_sizes[board_mem_region_count] = size;
+			board_mem_region_count++;
+			if (board_mem_region_count ==
+			    SIBYTE_MAX_MEM_REGIONS) {
+				/*
+				 * Too many regions.  Need to configure more
+				 */
+				while(1);
+			}
+		}
+	}
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start) {
+		add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
+				  BOOT_MEM_RESERVED);
+	}
+#endif
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+static int __init initrd_setup(char *str)
+{
+	char rdarg[64];
+	int idx;
+	char *tmp, *endptr;
+	unsigned long initrd_size;
+
+	/* Make a copy of the initrd argument so we can smash it up here */
+	for (idx = 0; idx < sizeof(rdarg)-1; idx++) {
+		if (!str[idx] || (str[idx] == ' ')) break;
+		rdarg[idx] = str[idx];
+	}
+
+	rdarg[idx] = 0;
+	str = rdarg;
+
+	/*
+	 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>"
+	 *  e.g. initrd=3abfd@80010000.  This is set up by the loader.
+	 */
+	for (tmp = str; *tmp != '@'; tmp++) {
+		if (!*tmp) {
+			goto fail;
+		}
+	}
+	*tmp = 0;
+	tmp++;
+	if (!*tmp) {
+		goto fail;
+	}
+	initrd_size = simple_strtoul(str, &endptr, 16);
+	if (*endptr) {
+		*(tmp-1) = '@';
+		goto fail;
+	}
+	*(tmp-1) = '@';
+	initrd_start = simple_strtoul(tmp, &endptr, 16);
+	if (*endptr) {
+		goto fail;
+	}
+	initrd_end = initrd_start + initrd_size;
+	prom_printf("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
+	return 1;
+ fail:
+	prom_printf("Bad initrd argument.  Disabling initrd\n");
+	initrd_start = 0;
+	initrd_end = 0;
+	return 1;
+}
+
+#endif
+
+/*
+ * prom_init is called just after the cpu type is determined, from setup_arch()
+ */
+void __init prom_init(void)
+{
+	uint64_t cfe_ept, cfe_handle;
+	unsigned int cfe_eptseal;
+	int argc = fw_arg0;
+	char **envp = (char **) fw_arg2;
+	int *prom_vec = (int *) fw_arg3;
+#ifdef CONFIG_KGDB
+	char *arg;
+#endif
+
+	_machine_restart   = cfe_linux_restart;
+	_machine_halt      = cfe_linux_halt;
+	_machine_power_off = cfe_linux_halt;
+
+	/*
+	 * Check if a loader was used; if NOT, the 4 arguments are
+	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+	 */
+	if (argc < 0) {
+		cfe_handle = (uint64_t)(long)argc;
+		cfe_ept = (long)envp;
+		cfe_eptseal = (uint32_t)(unsigned long)prom_vec;
+	} else {
+		if ((int32_t)(long)prom_vec < 0) {
+			/*
+			 * Old loader; all it gives us is the handle,
+			 * so use the "known" entrypoint and assume
+			 * the seal.
+			 */
+			cfe_handle = (uint64_t)(long)prom_vec;
+			cfe_ept = (uint64_t)((int32_t)0x9fc00500);
+			cfe_eptseal = CFE_EPTSEAL;
+		} else {
+			/*
+			 * Newer loaders bundle the handle/ept/eptseal
+			 * Note: prom_vec is in the loader's useg
+			 * which is still alive in the TLB.
+			 */
+			cfe_handle = (uint64_t)((int32_t *)prom_vec)[0];
+			cfe_ept = (uint64_t)((int32_t *)prom_vec)[2];
+			cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3];
+		}
+	}
+	if (cfe_eptseal != CFE_EPTSEAL) {
+		/* too early for panic to do any good */
+		prom_printf("CFE's entrypoint seal doesn't match. Spinning.");
+		while (1) ;
+	}
+	cfe_init(cfe_handle, cfe_ept);
+	/* 
+	 * Get the handle for (at least) prom_putchar, possibly for
+	 * boot console
+	 */
+	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
+		if (argc < 0) {
+			/*
+			 * It's OK for direct boot to not provide a
+			 *  command line
+			 */
+			strcpy(arcs_cmdline, "root=/dev/ram0 ");
+#ifdef CONFIG_SIBYTE_PTSWARM
+			strcat(arcs_cmdline, "console=ttyS0,115200 ");
+#endif
+		} else {
+			/* The loader should have set the command line */
+			/* too early for panic to do any good */
+			prom_printf("LINUX_CMDLINE not defined in cfe.");
+			while (1) ;
+		}
+	}
+
+#ifdef CONFIG_KGDB
+	if ((arg = strstr(arcs_cmdline,"kgdb=duart")) != NULL)
+		kgdb_port = (arg[10] == '0') ? 0 : 1;
+	else
+		kgdb_port = 1;
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	{
+		char *ptr;
+		/* Need to find out early whether we've got an initrd.  So scan
+		   the list looking now */
+		for (ptr = arcs_cmdline; *ptr; ptr++) {
+			while (*ptr == ' ') {
+				ptr++;
+			}
+			if (!strncmp(ptr, "initrd=", 7)) {
+				initrd_setup(ptr+7);
+				break;
+			} else {
+				while (*ptr && (*ptr != ' ')) {
+					ptr++;
+				}
+			}
+		}
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+	/* Not sure this is needed, but it's the safe way. */
+	arcs_cmdline[CL_SIZE-1] = 0;
+
+	mips_machgroup = MACH_GROUP_SIBYTE;
+	prom_meminit();
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	/* Not sure what I'm supposed to do here.  Nothing, I think */
+	return 0;
+}
+
+void prom_putchar(char c)
+{
+	int ret;
+
+	while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0)
+		;
+}
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
new file mode 100644
index 000000000000..73392190d2b1
--- /dev/null
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <asm/processor.h>
+
+#include "cfe_api.h"
+#include "cfe_error.h"
+
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+void __init prom_prepare_cpus(unsigned int max_cpus)
+{
+	int i, num;
+
+	cpus_clear(phys_cpu_present_map);
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	for (i=1, num=0; i<NR_CPUS; i++) {
+		if (cfe_cpu_stop(i) == 0) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+	}
+	printk("Detected %i available secondary CPU(s)\n", num);
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ */
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+	int retval;
+	
+	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+			       __KSTK_TOS(idle),
+			       (unsigned long)idle->thread_info, 0);
+	if (retval != 0)
+		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+void prom_init_secondary(void)
+{
+	extern void sb1250_smp_init(void);
+	sb1250_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+void prom_smp_finish(void)
+{
+	extern void sb1250_smp_finish(void);
+	sb1250_smp_finish();
+}
+
+/*
+ * Final cleanup after all secondaries booted
+ */
+void prom_cpus_done(void)
+{
+}
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
new file mode 100644
index 000000000000..a8af84697588
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -0,0 +1,8 @@
+obj-y := setup.o irq.o irq_handler.o time.o
+
+obj-$(CONFIG_SMP)			+= smp.o
+obj-$(CONFIG_SIBYTE_TBPROF)		+= bcm1250_tbprof.o
+obj-$(CONFIG_SIBYTE_STANDALONE)		+= prom.o
+obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
new file mode 100644
index 000000000000..7f813ae9eaff
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#define SBPROF_TB_DEBUG 0
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/trace_prof.h>
+
+#define DEVNAME "bcm1250_tbprof"
+
+static struct sbprof_tb sbp;
+
+#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
+
+/************************************************************************
+ * Support for ZBbus sampling using the trace buffer
+ *
+ * We use the SCD performance counter interrupt, caused by a Zclk counter
+ * overflow, to trigger the start of tracing.
+ *
+ * We set the trace buffer to sample everything and freeze on
+ * overflow.
+ *
+ * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
+ *
+ ************************************************************************/
+
+static u_int64_t tb_period;
+
+static void arm_tb(void)
+{
+        u_int64_t scdperfcnt;
+	u_int64_t next = (1ULL << 40) - tb_period;
+	u_int64_t tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
+	/* Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
+	   trigger start of trace.  XXX vary sampling period */
+	bus_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	/* Unfortunately, in Pass 2 we must clear all counters to knock down
+	   a previous interrupt request.  This means that bus profiling
+	   requires ALL of the SCD perf counters. */
+	bus_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | // keep counters 0,2,3 as is
+		   M_SPC_CFG_ENABLE |		 // enable counting
+		   M_SPC_CFG_CLEAR |		 // clear all counters
+		   V_SPC_CFG_SRC1(1),		 // counter 1 counts cycles
+		   IOADDR(A_SCD_PERF_CNT_CFG));
+	bus_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+	/* Reset the trace buffer */
+	bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
+	/* XXXKW may want to expose control to the data-collector */
+	tb_options |= M_SCD_TRACE_CFG_FORCECNT;
+#endif
+	bus_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+	sbp.tb_armed = 1;
+}
+
+static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int i;
+	DBG(printk(DEVNAME ": tb_intr\n"));
+	if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
+		/* XXX should use XKPHYS to make writes bypass L2 */
+		u_int64_t *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
+		/* Read out trace */
+		bus_writeq(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+		__asm__ __volatile__ ("sync" : : : "memory");
+		/* Loop runs backwards because bundles are read out in reverse order */
+		for (i = 256 * 6; i > 0; i -= 6) {
+			// Subscripts decrease to put bundle in the order
+			//   t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi
+			p[i-1] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 hi
+			p[i-2] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t2 lo
+			p[i-3] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 hi
+			p[i-4] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t1 lo
+			p[i-5] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 hi
+			p[i-6] = bus_readq(IOADDR(A_SCD_TRACE_READ)); // read t0 lo
+		}
+		if (!sbp.tb_enable) {
+			DBG(printk(DEVNAME ": tb_intr shutdown\n"));
+			bus_writeq(M_SCD_TRACE_CFG_RESET,
+				   IOADDR(A_SCD_TRACE_CFG));
+			sbp.tb_armed = 0;
+			wake_up(&sbp.tb_sync);
+		} else {
+			arm_tb();	// knock down current interrupt and get another one later
+		}
+	} else {
+		/* No more trace buffer samples */
+		DBG(printk(DEVNAME ": tb_intr full\n"));
+		bus_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+		sbp.tb_armed = 0;
+		if (!sbp.tb_enable) {
+			wake_up(&sbp.tb_sync);
+		}
+		wake_up(&sbp.tb_read);
+	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sbprof_pc_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+	printk(DEVNAME ": unexpected pc_intr");
+	return IRQ_NONE;
+}
+
+int sbprof_zbprof_start(struct file *filp)
+{
+	u_int64_t scdperfcnt;
+
+	if (sbp.tb_enable)
+		return -EBUSY;
+
+	DBG(printk(DEVNAME ": starting\n"));
+
+	sbp.tb_enable = 1;
+	sbp.next_tb_sample = 0;
+	filp->f_pos = 0;
+
+	if (request_irq
+	    (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, DEVNAME " trace freeze", &sbp)) {
+		return -EBUSY;
+	}
+	/* Make sure there isn't a perf-cnt interrupt waiting */
+	scdperfcnt = bus_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+	/* Disable and clear counters, override SRC_1 */
+	bus_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+		   M_SPC_CFG_ENABLE |
+		   M_SPC_CFG_CLEAR |
+		   V_SPC_CFG_SRC1(1),
+		   IOADDR(A_SCD_PERF_CNT_CFG));
+
+	/* We grab this interrupt to prevent others from trying to use
+           it, even though we don't want to service the interrupts
+           (they only feed into the trace-on-interrupt mechanism) */
+	if (request_irq
+	    (K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
+		free_irq(K_INT_TRACE_FREEZE, &sbp);
+		return -EBUSY;
+	}
+
+	/* I need the core to mask these, but the interrupt mapper to
+	   pass them through.  I am exploiting my knowledge that
+	   cp0_status masks out IP[5]. krw */
+	bus_writeq(K_INT_MAP_I3,
+		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			  (K_INT_PERF_CNT << 3)));
+
+	/* Initialize address traps */
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+	bus_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+
+	/* Initialize Trace Event 0-7 */
+	//				when interrupt
+	bus_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+
+	/* Initialize Trace Sequence 0-7 */
+	//				     Start on event 0 (interrupt)
+	bus_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+		   IOADDR(A_SCD_TRACE_SEQUENCE_0));
+	//			  dsamp when d used | asamp when a used
+	bus_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+		   K_SCD_TRSEQ_TRIGGER_ALL,
+		   IOADDR(A_SCD_TRACE_SEQUENCE_1));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+	bus_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+
+	/* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
+	bus_writeq((1ULL << K_INT_PERF_CNT),
+		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+
+	arm_tb();
+
+	DBG(printk(DEVNAME ": done starting\n"));
+
+	return 0;
+}
+
+int sbprof_zbprof_stop(void)
+{
+	DBG(printk(DEVNAME ": stopping\n"));
+
+	if (sbp.tb_enable) {
+		sbp.tb_enable = 0;
+		/* XXXKW there is a window here where the intr handler
+		   may run, see the disable, and do the wake_up before
+		   this sleep happens. */
+		if (sbp.tb_armed) {
+			DBG(printk(DEVNAME ": wait for disarm\n"));
+			interruptible_sleep_on(&sbp.tb_sync);
+			DBG(printk(DEVNAME ": disarm complete\n"));
+		}
+		free_irq(K_INT_TRACE_FREEZE, &sbp);
+		free_irq(K_INT_PERF_CNT, &sbp);
+	}
+
+	DBG(printk(DEVNAME ": done stopping\n"));
+
+	return 0;
+}
+
+static int sbprof_tb_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = iminor(inode);
+	if (minor != 0) {
+		return -ENODEV;
+	}
+	if (sbp.open) {
+		return -EBUSY;
+	}
+
+	memset(&sbp, 0, sizeof(struct sbprof_tb));
+	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
+	if (!sbp.sbprof_tbbuf) {
+		return -ENOMEM;
+	}
+	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
+	init_waitqueue_head(&sbp.tb_sync);
+	init_waitqueue_head(&sbp.tb_read);
+	sbp.open = 1;
+
+	return 0;
+}
+
+static int sbprof_tb_release(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = iminor(inode);
+	if (minor != 0 || !sbp.open) {
+		return -ENODEV;
+	}
+
+	if (sbp.tb_armed || sbp.tb_enable) {
+		sbprof_zbprof_stop();
+	}
+
+	vfree(sbp.sbprof_tbbuf);
+	sbp.open = 0;
+
+	return 0;
+}
+
+static ssize_t sbprof_tb_read(struct file *filp, char *buf,
+			      size_t size, loff_t *offp)
+{
+	int cur_sample, sample_off, cur_count, sample_left;
+	char *src;
+	int   count   =	 0;
+	char *dest    =	 buf;
+	long  cur_off = *offp;
+
+	count = 0;
+	cur_sample = cur_off / TB_SAMPLE_SIZE;
+	sample_off = cur_off % TB_SAMPLE_SIZE;
+	sample_left = TB_SAMPLE_SIZE - sample_off;
+	while (size && (cur_sample < sbp.next_tb_sample)) {
+		cur_count = size < sample_left ? size : sample_left;
+		src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
+		copy_to_user(dest, src, cur_count);
+		DBG(printk(DEVNAME ": read from sample %d, %d bytes\n",
+			   cur_sample, cur_count));
+		size -= cur_count;
+		sample_left -= cur_count;
+		if (!sample_left) {
+			cur_sample++;
+			sample_off = 0;
+			sample_left = TB_SAMPLE_SIZE;
+		} else {
+			sample_off += cur_count;
+		}
+		cur_off += cur_count;
+		dest += cur_count;
+		count += cur_count;
+	}
+	*offp = cur_off;
+
+	return count;
+}
+
+static int sbprof_tb_ioctl(struct inode *inode,
+			   struct file *filp,
+			   unsigned int command,
+			   unsigned long arg)
+{
+	int error = 0;
+
+	switch (command) {
+	case SBPROF_ZBSTART:
+		error = sbprof_zbprof_start(filp);
+		break;
+	case SBPROF_ZBSTOP:
+		error = sbprof_zbprof_stop();
+		break;
+	case SBPROF_ZBWAITFULL:
+		interruptible_sleep_on(&sbp.tb_read);
+		/* XXXKW check if interrupted? */
+		return put_user(TB_FULL, (int *) arg);
+	default:
+		error = -EINVAL;
+		break;
+	}
+
+	return error;
+}
+
+static struct file_operations sbprof_tb_fops = {
+	.owner		= THIS_MODULE,
+	.open		= sbprof_tb_open,
+	.release	= sbprof_tb_release,
+	.read		= sbprof_tb_read,
+	.ioctl		= sbprof_tb_ioctl,
+	.mmap		= NULL,
+};
+
+static int __init sbprof_tb_init(void)
+{
+	if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
+		printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
+		       SBPROF_TB_MAJOR);
+		return -EIO;
+	}
+	sbp.open = 0;
+	tb_period = zbbus_mhz * 10000LL;
+	printk(KERN_INFO DEVNAME ": initialized - tb_period = %lld\n", tb_period);
+	return 0;
+}
+
+static void __exit sbprof_tb_cleanup(void)
+{
+	unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+}
+
+module_init(sbprof_tb_init);
+module_exit(sbprof_tb_cleanup);
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c
new file mode 100644
index 000000000000..182a16f42e2d
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/bus_watcher.c
@@ -0,0 +1,259 @@
+/*
+ * Copyright (C) 2002,2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/* 
+ * The Bus Watcher monitors internal bus transactions and maintains
+ * counts of transactions with error status, logging details and
+ * causing one of several interrupts.  This driver provides a handler
+ * for those interrupts which aggregates the counts (to avoid
+ * saturating the 8-bit counters) and provides a presence in
+ * /proc/bus_watcher if PROC_FS is on.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <asm/system.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+
+struct bw_stats_struct {
+	uint64_t status;
+	uint32_t l2_err;
+	uint32_t memio_err;
+	int status_printed;
+	unsigned long l2_cor_d;
+	unsigned long l2_bad_d;
+	unsigned long l2_cor_t;
+	unsigned long l2_bad_t;
+	unsigned long mem_cor_d;
+	unsigned long mem_bad_d;
+	unsigned long bus_error;
+} bw_stats;
+
+
+static void print_summary(uint32_t status, uint32_t l2_err,
+			  uint32_t memio_err)
+{
+	printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
+	printk("\nLast recorded signature:\n");
+	printk("Request %02x from %d, answered by %d with Dcode %d\n",
+	       (unsigned int)(G_SCD_BERR_TID(status) & 0x3f),
+	       (int)(G_SCD_BERR_TID(status) >> 6),
+	       (int)G_SCD_BERR_RID(status),
+	       (int)G_SCD_BERR_DCODE(status));
+}
+
+/*
+ * check_bus_watcher is exported for use in situations where we want
+ * to see the most recent status of the bus watcher, which might have
+ * already been destructively read out of the registers.
+ *
+ * notes: this is currently used by the cache error handler
+ *        should provide locking against the interrupt handler
+ */
+void check_bus_watcher(void)
+{
+	u32 status, l2_err, memio_err;
+
+#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
+	/* Destructive read, clears register and interrupt */
+	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
+#else
+	/* Use non-destructive register */
+	status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG));
+#endif
+	if (!(status & 0x7fffffff)) {
+		printk("Using last values reaped by bus watcher driver\n");
+		status = bw_stats.status;
+		l2_err = bw_stats.l2_err;
+		memio_err = bw_stats.memio_err;
+	} else {
+		l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+		memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
+	}
+	if (status & ~(1UL << 31))
+		print_summary(status, l2_err, memio_err);
+	else
+		printk("Bus watcher indicates no error\n");
+}
+
+static int bw_print_buffer(char *page, struct bw_stats_struct *stats)
+{
+	int len;
+
+	len = sprintf(page, "SiByte Bus Watcher statistics\n");
+	len += sprintf(page+len, "-----------------------------\n");
+	len += sprintf(page+len, "L2-d-cor %8ld\nL2-d-bad %8ld\n",
+		       stats->l2_cor_d, stats->l2_bad_d);
+	len += sprintf(page+len, "L2-t-cor %8ld\nL2-t-bad %8ld\n",
+		       stats->l2_cor_t, stats->l2_bad_t);
+	len += sprintf(page+len, "MC-d-cor %8ld\nMC-d-bad %8ld\n",
+		       stats->mem_cor_d, stats->mem_bad_d);
+	len += sprintf(page+len, "IO-err   %8ld\n", stats->bus_error);
+	len += sprintf(page+len, "\nLast recorded signature:\n");
+	len += sprintf(page+len, "Request %02x from %d, answered by %d with Dcode %d\n",
+		       (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f),
+		       (int)(G_SCD_BERR_TID(stats->status) >> 6),
+		       (int)G_SCD_BERR_RID(stats->status),
+		       (int)G_SCD_BERR_DCODE(stats->status));
+	/* XXXKW indicate multiple errors between printings, or stats
+           collection (or both)? */
+	if (stats->status & M_SCD_BERR_MULTERRS)
+		len += sprintf(page+len, "Multiple errors observed since last check.\n");
+	if (stats->status_printed) {
+		len += sprintf(page+len, "(no change since last printing)\n");
+	} else {
+		stats->status_printed = 1;
+	}
+
+	return len;
+}
+
+#ifdef CONFIG_PROC_FS
+
+/* For simplicity, I want to assume a single read is required each
+   time */
+static int bw_read_proc(char *page, char **start, off_t off,
+			int count, int *eof, void *data)
+{
+	int len;
+
+	if (off == 0) {
+		len = bw_print_buffer(page, data);
+		*start = page;
+	} else {
+		len = 0;
+		*eof = 1;
+	}
+	return len;
+}
+
+static void create_proc_decoder(struct bw_stats_struct *stats)
+{
+	struct proc_dir_entry *ent;
+	
+	ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL,
+				     bw_read_proc, stats);
+	if (!ent) {
+		printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n");
+		return;
+	}
+}
+
+#endif /* CONFIG_PROC_FS */
+
+/*
+ * sibyte_bw_int - handle bus watcher interrupts and accumulate counts
+ *
+ * notes: possible re-entry due to multiple sources
+ *        should check/indicate saturation
+ */
+static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs)
+{
+	struct bw_stats_struct *stats = data;
+	unsigned long cntr;
+#ifdef CONFIG_SIBYTE_BW_TRACE
+	int i;
+#endif
+#ifndef CONFIG_PROC_FS
+	char bw_buf[1024];
+#endif
+
+#ifdef CONFIG_SIBYTE_BW_TRACE
+	csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG));
+	csr_out32(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG));
+
+	for (i=0; i<256*6; i++)
+		printk("%016llx\n",
+		       (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ)));
+
+	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
+#endif
+
+	/* Destructive read, clears register and interrupt */
+	stats->status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS));
+	stats->status_printed = 0;
+
+	stats->l2_err = cntr = csr_in32(IOADDR(A_BUS_L2_ERRORS));
+	stats->l2_cor_d += G_SCD_L2ECC_CORR_D(cntr);
+	stats->l2_bad_d += G_SCD_L2ECC_BAD_D(cntr);
+	stats->l2_cor_t += G_SCD_L2ECC_CORR_T(cntr);
+	stats->l2_bad_t += G_SCD_L2ECC_BAD_T(cntr);
+	csr_out32(0, IOADDR(A_BUS_L2_ERRORS));
+
+	stats->memio_err = cntr = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS));
+	stats->mem_cor_d += G_SCD_MEM_ECC_CORR(cntr);
+	stats->mem_bad_d += G_SCD_MEM_ECC_BAD(cntr);
+	stats->bus_error += G_SCD_MEM_BUSERR(cntr);
+	csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS));
+
+#ifndef CONFIG_PROC_FS
+	bw_print_buffer(bw_buf, stats);
+	printk(bw_buf);
+#endif
+
+	return IRQ_HANDLED;
+}
+
+int __init sibyte_bus_watcher(void)
+{
+	memset(&bw_stats, 0, sizeof(struct bw_stats_struct));
+	bw_stats.status_printed = 1;
+
+	if (request_irq(K_INT_BAD_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
+		printk("Failed to register bus watcher BAD_ECC irq\n");
+		return -1;
+	}
+	if (request_irq(K_INT_COR_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
+		free_irq(K_INT_BAD_ECC, &bw_stats);
+		printk("Failed to register bus watcher COR_ECC irq\n");
+		return -1;
+	}
+	if (request_irq(K_INT_IO_BUS, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) {
+		free_irq(K_INT_BAD_ECC, &bw_stats);
+		free_irq(K_INT_COR_ECC, &bw_stats);
+		printk("Failed to register bus watcher IO_BUS irq\n");
+		return -1;
+	}
+
+#ifdef CONFIG_PROC_FS
+	create_proc_decoder(&bw_stats);
+#endif
+
+#ifdef CONFIG_SIBYTE_BW_TRACE
+	csr_out32((M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+		   K_SCD_TRSEQ_TRIGGER_ALL),
+		  IOADDR(A_SCD_TRACE_SEQUENCE_0));
+	csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+	csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG));
+#endif
+
+	return 0;
+}
+
+__initcall(sibyte_bus_watcher);
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
new file mode 100644
index 000000000000..2728abbc94d2
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -0,0 +1,431 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/signal.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+
+#define shutdown_sb1250_irq	disable_sb1250_irq
+static void end_sb1250_irq(unsigned int irq);
+static void enable_sb1250_irq(unsigned int irq);
+static void disable_sb1250_irq(unsigned int irq);
+static unsigned int startup_sb1250_irq(unsigned int irq);
+static void ack_sb1250_irq(unsigned int irq);
+#ifdef CONFIG_SMP
+static void sb1250_set_affinity(unsigned int irq, unsigned long mask);
+#endif
+
+#ifdef CONFIG_SIBYTE_HAS_LDT
+extern unsigned long ldt_eoi_space;
+#endif
+
+#ifdef CONFIG_KGDB
+static int kgdb_irq;
+
+/* Default to UART1 */
+int kgdb_port = 1;
+#ifdef CONFIG_SIBYTE_SB1250_DUART
+extern char sb1250_duart_present[];
+#endif
+#endif
+
+static struct hw_interrupt_type sb1250_irq_type = {
+	"SB1250-IMR",
+	startup_sb1250_irq,
+	shutdown_sb1250_irq,
+	enable_sb1250_irq,
+	disable_sb1250_irq,
+	ack_sb1250_irq,
+	end_sb1250_irq,
+#ifdef CONFIG_SMP
+	sb1250_set_affinity
+#else
+	NULL
+#endif
+};
+
+/* Store the CPU id (not the logical number) */
+int sb1250_irq_owner[SB1250_NR_IRQS];
+
+DEFINE_SPINLOCK(sb1250_imr_lock);
+
+void sb1250_mask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints;
+
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
+	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
+				      R_IMR_INTERRUPT_MASK));
+	cur_ints |= (((u64) 1) << irq);
+	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+				      R_IMR_INTERRUPT_MASK));
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+}
+
+void sb1250_unmask_irq(int cpu, int irq)
+{
+	unsigned long flags;
+	u64 cur_ints;
+
+	spin_lock_irqsave(&sb1250_imr_lock, flags);
+	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
+				      R_IMR_INTERRUPT_MASK));
+	cur_ints &= ~(((u64) 1) << irq);
+	__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+				      R_IMR_INTERRUPT_MASK));
+	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static void sb1250_set_affinity(unsigned int irq, unsigned long mask)
+{
+	int i = 0, old_cpu, cpu, int_on;
+	u64 cur_ints;
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+
+	while (mask) {
+		if (mask & 1) {
+			mask >>= 1;
+			break;
+		}
+		mask >>= 1;
+		i++;
+	}
+
+	if (mask) {
+		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
+		return;
+	}
+
+	/* Convert logical CPU to physical CPU */
+	cpu = cpu_logical_map(i);
+
+	/* Protect against other affinity changers and IMR manipulation */
+	spin_lock_irqsave(&desc->lock, flags);
+	spin_lock(&sb1250_imr_lock);
+
+	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
+	old_cpu = sb1250_irq_owner[irq];
+	cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
+			       R_IMR_INTERRUPT_MASK));
+	int_on = !(cur_ints & (((u64) 1) << irq));
+	if (int_on) {
+		/* If it was on, mask it */
+		cur_ints |= (((u64) 1) << irq);
+		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
+					      R_IMR_INTERRUPT_MASK));
+	}
+	sb1250_irq_owner[irq] = cpu;
+	if (int_on) {
+		/* unmask for the new CPU */
+		cur_ints = __bus_readq(IOADDR(A_IMR_MAPPER(cpu) +
+				       R_IMR_INTERRUPT_MASK));
+		cur_ints &= ~(((u64) 1) << irq);
+		__bus_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
+					      R_IMR_INTERRUPT_MASK));
+	}
+	spin_unlock(&sb1250_imr_lock);
+	spin_unlock_irqrestore(&desc->lock, flags);
+}
+#endif
+
+
+/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */
+extern void sb1250_irq_handler(void);
+
+/*****************************************************************************/
+
+static unsigned int startup_sb1250_irq(unsigned int irq)
+{
+	sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
+
+	return 0;		/* never anything pending */
+}
+
+
+static void disable_sb1250_irq(unsigned int irq)
+{
+	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
+}
+
+static void enable_sb1250_irq(unsigned int irq)
+{
+	sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
+}
+
+
+static void ack_sb1250_irq(unsigned int irq)
+{
+#ifdef CONFIG_SIBYTE_HAS_LDT
+	u64 pending;
+
+	/*
+	 * If the interrupt was an HT interrupt, now is the time to
+	 * clear it.  NOTE: we assume the HT bridge was set up to
+	 * deliver the interrupts to all CPUs (which makes affinity
+	 * changing easier for us)
+	 */
+	pending = bus_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
+						  R_IMR_LDT_INTERRUPT)));
+	pending &= ((u64)1 << (irq));
+	if (pending) {
+		int i;
+		for (i=0; i<NR_CPUS; i++) {
+			int cpu;
+#ifdef CONFIG_SMP
+			cpu = cpu_logical_map(i);
+#else
+			cpu = i;
+#endif
+			/*
+			 * Clear for all CPUs so an affinity switch
+			 * doesn't find an old status
+			 */
+			bus_writeq(pending,
+				   IOADDR(A_IMR_REGISTER(cpu,
+						R_IMR_LDT_INTERRUPT_CLR)));
+		}
+
+		/*
+		 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
+		 * Pass 2, the LDT world may be edge-triggered, but
+		 * this EOI shouldn't hurt.  If they are
+		 * level-sensitive, the EOI is required.
+		 */
+		*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
+	}
+#endif
+	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
+}
+
+
+static void end_sb1250_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+		sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
+	}
+}
+
+
+void __init init_sb1250_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		irq_desc[i].status = IRQ_DISABLED;
+		irq_desc[i].action = 0;
+		irq_desc[i].depth = 1;
+		if (i < SB1250_NR_IRQS) {
+			irq_desc[i].handler = &sb1250_irq_type;
+			sb1250_irq_owner[i] = 0;
+		} else {
+			irq_desc[i].handler = &no_irq_type;
+		}
+	}
+}
+
+
+static irqreturn_t  sb1250_dummy_handler(int irq, void *dev_id,
+	struct pt_regs *regs)
+{
+	return IRQ_NONE;
+}
+
+static struct irqaction sb1250_dummy_action = {
+	.handler = sb1250_dummy_handler,
+	.flags   = 0,
+	.mask    = CPU_MASK_NONE,
+	.name    = "sb1250-private",
+	.next    = NULL,
+	.dev_id  = 0
+};
+
+int sb1250_steal_irq(int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned long flags;
+	int retval = 0;
+
+	if (irq >= SB1250_NR_IRQS)
+		return -EINVAL;
+
+	spin_lock_irqsave(&desc->lock,flags);
+	/* Don't allow sharing at all for these */
+	if (desc->action != NULL)
+		retval = -EBUSY;
+	else {
+		desc->action = &sb1250_dummy_action;
+		desc->depth = 0;
+	}
+	spin_unlock_irqrestore(&desc->lock,flags);
+	return 0;
+}
+
+/*
+ *  arch_init_irq is called early in the boot sequence from init/main.c via
+ *  init_IRQ.  It is responsible for setting up the interrupt mapper and
+ *  installing the handler that will be responsible for dispatching interrupts
+ *  to the "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2].  We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup.  We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt.  That one is
+ * set to IP[2] so it is handled.  This is needed so we
+ * can do cross-cpu function calls, as requred by SMP
+ */
+
+#define IMR_IP2_VAL	K_INT_MAP_I0
+#define IMR_IP3_VAL	K_INT_MAP_I1
+#define IMR_IP4_VAL	K_INT_MAP_I2
+#define IMR_IP5_VAL	K_INT_MAP_I3
+#define IMR_IP6_VAL	K_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+
+	unsigned int i;
+	u64 tmp;
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Default everything to IP2 */
+	for (i = 0; i < SB1250_NR_IRQS; i++) {	/* was I0 */
+		bus_writeq(IMR_IP2_VAL,
+			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+				  (i << 3)));
+		bus_writeq(IMR_IP2_VAL,
+			   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+				  (i << 3)));
+	}
+
+	init_sb1250_irqs();
+
+	/*
+	 * Map the high 16 bits of the mailbox registers to IP[3], for
+	 * inter-cpu messages
+	 */
+	/* Was I1 */
+	bus_writeq(IMR_IP3_VAL,
+		   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+			  (K_INT_MBOX_0 << 3)));
+	bus_writeq(IMR_IP3_VAL,
+		   IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
+			  (K_INT_MBOX_0 << 3)));
+
+	/* Clear the mailboxes.  The firmware may leave them dirty */
+	bus_writeq(0xffffffffffffffffULL,
+		   IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
+	bus_writeq(0xffffffffffffffffULL,
+		   IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
+
+	/* Mask everything except the mailbox registers for both cpus */
+	tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
+	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
+	bus_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
+
+	sb1250_steal_irq(K_INT_MBOX_0);
+
+	/*
+	 * Note that the timer interrupts are also mapped, but this is
+	 * done in sb1250_time_init().  Also, the profiling driver 
+	 * does its own management of IP7.
+	 */
+
+#ifdef CONFIG_KGDB
+	imask |= STATUSF_IP6;
+#endif
+	/* Enable necessary IPs, disable the rest */
+	change_c0_status(ST0_IM, imask);
+	set_except_vector(0, sb1250_irq_handler);
+
+#ifdef CONFIG_KGDB
+	if (kgdb_flag) {
+		kgdb_irq = K_INT_UART_0 + kgdb_port;
+
+#ifdef CONFIG_SIBYTE_SB1250_DUART	
+		sb1250_duart_present[kgdb_port] = 0;
+#endif
+		/* Setup uart 1 settings, mapper */
+		bus_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
+
+		sb1250_steal_irq(kgdb_irq);
+		bus_writeq(IMR_IP6_VAL,
+			   IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+				  (kgdb_irq<<3)));
+		sb1250_unmask_irq(0, kgdb_irq);
+	}
+#endif
+}
+
+#ifdef CONFIG_KGDB
+
+#include <linux/delay.h>
+
+#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void sb1250_kgdb_interrupt(struct pt_regs *regs)
+{
+	/*
+	 * Clear break-change status (allow some time for the remote
+	 * host to stop the break, since we would see another
+	 * interrupt on the end-of-break too)
+	 */
+	kstat_this_cpu.irqs[kgdb_irq]++;
+	mdelay(500);
+	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
+				M_DUART_RX_EN | M_DUART_TX_EN);
+	set_async_breakpoint(&regs->cp0_epc);
+}
+
+#endif 	/* CONFIG_KGDB */
diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S
new file mode 100644
index 000000000000..60edc8fb302b
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/irq_handler.S
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * sb1250_handle_int() is the routine that is actually called when an interrupt
+ * occurs.  It is installed as the exception vector handler in arch_init_irq()
+ * in arch/mips/sibyte/sb1250/irq.c
+ *
+ * In the handle we figure out which interrupts need handling, and use that to
+ * call the dispatcher, which will take care of actually calling registered
+ * handlers
+ *
+ * Note that we take care of all raised interrupts in one go at the handler.
+ * This is more BSDish than the Indy code, and also, IMHO, more sane.
+ */
+#include <linux/config.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/sibyte/sb1250_defs.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+
+/*
+ * What a pain. We have to be really careful saving the upper 32 bits of any
+ * register across function calls if we don't want them trashed--since were
+ * running in -o32, the calling routing never saves the full 64 bits of a
+ * register across a function call.  Being the interrupt handler, we're
+ * guaranteed that interrupts are disabled during this code so we don't have
+ * to worry about random interrupts blasting the high 32 bits.
+ */
+
+	.text
+	.set	push
+	.set	noreorder
+	.set	noat
+	.set	mips64
+	.align	5
+	NESTED(sb1250_irq_handler, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+	/* Set compare to count to silence count/compare timer interrupts */
+	mfc0	t1, CP0_COUNT
+	mtc0	t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
+#endif
+	/* Read cause */
+	mfc0	s0, CP0_CAUSE
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+	/* Cpu performance counter interrupt is routed to IP[7] */
+	andi	t1, s0, CAUSEF_IP7
+	beqz	t1, 0f
+	 srl	t1, s0, (CAUSEB_BD-2)  /* Shift BD bit to bit 2 */
+	and	t1, t1, 0x4		/* mask to get just BD bit */
+	mfc0	a0, CP0_EPC
+	jal	sbprof_cpu_intr
+	 addu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
+	j	ret_from_irq
+	 nop
+0:
+#endif
+
+	/* Timer interrupt is routed to IP[4] */
+	andi	t1, s0, CAUSEF_IP4
+	beqz	t1, 1f
+	 nop
+	jal	sb1250_timer_interrupt
+	 move	a0, sp			/* Pass the registers along */
+	j	ret_from_irq
+	 nop				# delay slot
+1:
+
+#ifdef CONFIG_SMP
+	/* Mailbox interrupt is routed to IP[3] */
+	andi	 t1, s0, CAUSEF_IP3
+	beqz	 t1, 2f
+	 nop
+	jal	 sb1250_mailbox_interrupt
+	 move    a0, sp
+	j	ret_from_irq
+	 nop				# delay slot
+2:
+#endif
+
+#ifdef CONFIG_KGDB
+	/* KGDB (uart 1) interrupt is routed to IP[6] */
+	andi	t1, s0, CAUSEF_IP6
+	beqz	t1, 1f
+	nop                            # delay slot
+	jal	sb1250_kgdb_interrupt
+         move	a0, sp
+	j	ret_from_irq
+	nop                            # delay slot
+1:
+#endif
+
+	and      t1, s0, CAUSEF_IP2
+	beqz     t1, 4f
+	 nop
+
+	/*
+	 * Default...we've hit an IP[2] interrupt, which means we've got to
+	 * check the 1250 interrupt registers to figure out what to do
+	 * Need to detect which CPU we're on, now that smp_affinity is supported.
+	 */
+	PTR_LA	v0, CKSEG1 + A_IMR_CPU0_BASE
+#ifdef CONFIG_SMP
+	lw	t1, TI_CPU($28)
+	sll	t1, IMR_REGISTER_SPACING_SHIFT
+	addu	v0, t1
+#endif
+	ld	s0, R_IMR_INTERRUPT_STATUS_BASE(v0)	/* read IP[2] status */
+
+	beqz	s0, 4f		/* No interrupts.  Return */
+	 move	a1, sp
+
+3:	dclz	s1, s0		/* Find the next interrupt */
+	dsubu	a0, zero, s1
+	daddiu	a0, a0, 63
+	jal	 do_IRQ
+	 nop
+
+4:	j        ret_from_irq
+	 nop
+
+	.set pop
+	END(sb1250_irq_handler)
diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c
new file mode 100644
index 000000000000..de62ab0f55a2
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/prom.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/bootmem.h>
+#include <linux/smp.h>
+#include <linux/initrd.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+
+#define MAX_RAM_SIZE ((CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024) - 1)
+
+static __init void prom_meminit(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long initrd_pstart;
+	unsigned long initrd_pend;
+
+	initrd_pstart = __pa(initrd_start);
+	initrd_pend = __pa(initrd_end);
+	if (initrd_start &&
+	    ((initrd_pstart > MAX_RAM_SIZE)
+	     || (initrd_pend > MAX_RAM_SIZE))) {
+		panic("initrd out of addressable memory");
+	}
+
+	add_memory_region(0, initrd_pstart,
+			  BOOT_MEM_RAM);
+	add_memory_region(initrd_pstart, initrd_pend - initrd_pstart,
+			  BOOT_MEM_RESERVED);
+	add_memory_region(initrd_pend,
+			  (CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024) - initrd_pend,
+			  BOOT_MEM_RAM);
+#else
+	add_memory_region(0, CONFIG_SIBYTE_STANDALONE_RAM_SIZE * 1024 * 1024,
+			  BOOT_MEM_RAM);
+#endif
+}
+
+void prom_cpu0_exit(void *unused)
+{
+        while (1) ;
+}
+
+static void prom_linux_exit(void)
+{
+#ifdef CONFIG_SMP
+	if (smp_processor_id()) {
+		smp_call_function(prom_cpu0_exit,NULL,1,1);
+	}
+#endif
+	while(1);
+}
+
+/*
+ * prom_init is called just after the cpu type is determined, from setup_arch()
+ */
+void __init prom_init(void)
+{
+	_machine_restart   = (void (*)(char *))prom_linux_exit;
+	_machine_halt      = prom_linux_exit;
+	_machine_power_off = prom_linux_exit;
+
+	strcpy(arcs_cmdline, "root=/dev/ram0 ");
+
+	mips_machgroup = MACH_GROUP_SIBYTE;
+	prom_meminit();
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+	/* Not sure what I'm supposed to do here.  Nothing, I think */
+	return 0;
+}
+
+void prom_putchar(char c)
+{
+}
diff --git a/arch/mips/sibyte/sb1250/setup.c b/arch/mips/sibyte/sb1250/setup.c
new file mode 100644
index 000000000000..f8c605be96c7
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/setup.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/reboot.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+unsigned int sb1_pass;
+unsigned int soc_pass;
+unsigned int soc_type;
+unsigned int periph_rev;
+unsigned int zbbus_mhz;
+
+static char *soc_str;
+static char *pass_str;
+static unsigned int war_pass;	/* XXXKW don't overload PASS defines? */
+
+static inline int setup_bcm1250(void);
+static inline int setup_bcm112x(void);
+
+/* Setup code likely to be common to all SiByte platforms */
+
+static inline int sys_rev_decode(void)
+{
+	int ret = 0;
+
+	war_pass = soc_pass;
+	switch (soc_type) {
+	case K_SYS_SOC_TYPE_BCM1250:
+	case K_SYS_SOC_TYPE_BCM1250_ALT:
+	case K_SYS_SOC_TYPE_BCM1250_ALT2:
+		soc_str = "BCM1250";
+		ret = setup_bcm1250();
+		break;
+	case K_SYS_SOC_TYPE_BCM1120:
+		soc_str = "BCM1120";
+		ret = setup_bcm112x();
+		break;
+	case K_SYS_SOC_TYPE_BCM1125:
+		soc_str = "BCM1125";
+		ret = setup_bcm112x();
+		break;
+	case K_SYS_SOC_TYPE_BCM1125H:
+		soc_str = "BCM1125H";
+		ret = setup_bcm112x();
+		break;
+	default:
+		prom_printf("Unknown SOC type %x\n", soc_type);
+		ret = 1;
+		break;
+	}
+	return ret;
+}
+
+static inline int setup_bcm1250(void)
+{
+	int ret = 0;
+
+	switch (soc_pass) {
+	case K_SYS_REVISION_BCM1250_PASS1:
+		periph_rev = 1;
+		pass_str = "Pass 1";
+		break;
+	case K_SYS_REVISION_BCM1250_A10:
+		periph_rev = 2;
+		pass_str = "A8/A10";
+		/* XXXKW different war_pass? */
+		war_pass = K_SYS_REVISION_BCM1250_PASS2;
+		break;
+	case K_SYS_REVISION_BCM1250_PASS2_2:
+		periph_rev = 2;
+		pass_str = "B1";
+		break;
+	case K_SYS_REVISION_BCM1250_B2:
+		periph_rev = 2;
+		pass_str = "B2";
+		war_pass = K_SYS_REVISION_BCM1250_PASS2_2;
+		break;
+	case K_SYS_REVISION_BCM1250_PASS3:
+		periph_rev = 3;
+		pass_str = "C0";
+		break;
+	case K_SYS_REVISION_BCM1250_C1:
+		periph_rev = 3;
+		pass_str = "C1";
+		break;
+	default:
+		if (soc_pass < K_SYS_REVISION_BCM1250_PASS2_2) {
+			periph_rev = 2;
+			pass_str = "A0-A6";
+			war_pass = K_SYS_REVISION_BCM1250_PASS2;
+		} else {
+			prom_printf("Unknown BCM1250 rev %x\n", soc_pass);
+			ret = 1;
+		}
+		break;
+	}
+	return ret;
+}
+
+static inline int setup_bcm112x(void)
+{
+	int ret = 0;
+
+	switch (soc_pass) {
+	case 0:
+		/* Early build didn't have revid set */
+		periph_rev = 3;
+		pass_str = "A1";
+		war_pass = K_SYS_REVISION_BCM112x_A1;
+		break;
+	case K_SYS_REVISION_BCM112x_A1:
+		periph_rev = 3;
+		pass_str = "A1";
+		break;
+	case K_SYS_REVISION_BCM112x_A2:
+		periph_rev = 3;
+		pass_str = "A2";
+		break;
+	default:
+		prom_printf("Unknown %s rev %x\n", soc_str, soc_pass);
+		ret = 1;
+	}
+	return ret;
+}
+
+void sb1250_setup(void)
+{
+	uint64_t sys_rev;
+	int plldiv;
+	int bad_config = 0;
+
+	sb1_pass = read_c0_prid() & 0xff;
+	sys_rev = bus_readq(IOADDR(A_SCD_SYSTEM_REVISION));
+	soc_type = SYS_SOC_TYPE(sys_rev);
+	soc_pass = G_SYS_REVISION(sys_rev);
+
+	if (sys_rev_decode()) {
+		prom_printf("Restart after failure to identify SiByte chip\n");
+		machine_restart(NULL);
+	}
+
+	plldiv = G_SYS_PLL_DIV(bus_readq(IOADDR(A_SCD_SYSTEM_CFG)));
+	zbbus_mhz = ((plldiv >> 1) * 50) + ((plldiv & 1) * 25);
+
+	prom_printf("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
+		    soc_str, pass_str, zbbus_mhz * 2, sb1_pass);
+	prom_printf("Board type: %s\n", get_system_type());
+
+	switch(war_pass) {
+	case K_SYS_REVISION_BCM1250_PASS1:
+#ifndef CONFIG_SB1_PASS_1_WORKAROUNDS
+		prom_printf("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+		bad_config = 1;
+#endif
+		break;
+	case K_SYS_REVISION_BCM1250_PASS2:
+		/* Pass 2 - easiest as default for now - so many numbers */
+#if !defined(CONFIG_SB1_PASS_2_WORKAROUNDS) || !defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS)
+		prom_printf("@@@@ This is a BCM1250 A3-A10 board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+		bad_config = 1;
+#endif
+#ifdef CONFIG_CPU_HAS_PREFETCH
+		prom_printf("@@@@ Prefetches may be enabled in this kernel, but are buggy on this board.  @@@@\n");
+		bad_config = 1;
+#endif
+		break;
+	case K_SYS_REVISION_BCM1250_PASS2_2:
+#ifndef CONFIG_SB1_PASS_2_WORKAROUNDS
+		prom_printf("@@@@ This is a BCM1250 B1/B2. board, and the kernel doesn't have the proper workarounds compiled in. @@@@\n");
+		bad_config = 1;
+#endif
+#if defined(CONFIG_SB1_PASS_2_1_WORKAROUNDS) || !defined(CONFIG_CPU_HAS_PREFETCH)
+		prom_printf("@@@@ This is a BCM1250 B1/B2, but the kernel is conservatively configured for an 'A' stepping. @@@@\n");
+#endif
+		break;
+	default:
+		break;
+	}
+	if (bad_config) {
+		prom_printf("Invalid configuration for this chip.\n");
+		machine_restart(NULL);
+	}
+}
diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c
new file mode 100644
index 000000000000..be91b3990952
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/smp.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+
+static void *mailbox_set_regs[] = {
+	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
+	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
+};
+
+static void *mailbox_clear_regs[] = {
+	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
+	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
+};
+
+static void *mailbox_regs[] = {
+	(void *)IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
+	(void *)IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
+};
+
+/*
+ * SMP init and finish on secondary CPUs
+ */
+void sb1250_smp_init(void)
+{
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Set interrupt mask, but don't enable */
+	change_c0_status(ST0_IM, imask);
+}
+
+void sb1250_smp_finish(void)
+{
+	extern void sb1250_time_init(void);
+	sb1250_time_init();
+	local_irq_enable();
+}
+
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+void core_send_ipi(int cpu, unsigned int action)
+{
+	bus_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+}
+
+void sb1250_mailbox_interrupt(struct pt_regs *regs)
+{
+	int cpu = smp_processor_id();
+	unsigned int action;
+
+	kstat_this_cpu.irqs[K_INT_MBOX_0]++;
+	/* Load the mailbox register to figure out what we're supposed to do */
+	action = (__bus_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
+
+	/* Clear the mailbox to clear the interrupt */
+	__bus_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
+
+	/*
+	 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
+	 * interrupt will do the reschedule for us
+	 */
+
+	if (action & SMP_CALL_FUNCTION)
+		smp_call_function_interrupt();
+}
diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c
new file mode 100644
index 000000000000..8b4c848c907b
--- /dev/null
+++ b/arch/mips/sibyte/sb1250/time.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * These are routines to set up and handle interrupts from the
+ * sb1250 general purpose timer 0.  We're using the timer as a
+ * system clock, so we set it up to run at 100 Hz.  On every
+ * interrupt, we update our idea of what the time of day is,
+ * then call do_timer() in the architecture-independent kernel
+ * code to do general bookkeeping (e.g. update jiffies, run
+ * bottom halves, etc.)
+ */
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+#include <asm/addrspace.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/sibyte/sb1250_scd.h>
+
+
+#define IMR_IP2_VAL	K_INT_MAP_I0
+#define IMR_IP3_VAL	K_INT_MAP_I1
+#define IMR_IP4_VAL	K_INT_MAP_I2
+
+extern int sb1250_steal_irq(int irq);
+
+void sb1250_time_init(void)
+{
+	int cpu = smp_processor_id();
+	int irq = K_INT_TIMER_0+cpu;
+
+	/* Only have 4 general purpose timers */
+	if (cpu > 3) {
+		BUG();
+	}
+
+	if (!cpu) {
+		/* Use our own gettimeoffset() routine */
+		do_gettimeoffset = sb1250_gettimeoffset;
+	}
+
+	sb1250_mask_irq(cpu, irq);
+
+	/* Map the timer interrupt to ip[4] of this cpu */
+	bus_writeq(IMR_IP4_VAL,
+		   IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
+			  (irq << 3)));
+
+	/* the general purpose timer ticks at 1 Mhz independent if the rest of the system */
+	/* Disable the timer and set up the count */
+	bus_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+#ifdef CONFIG_SIMULATION
+	bus_writeq(50000 / HZ,
+		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+#else
+	bus_writeq(1000000/HZ,
+		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
+#endif
+
+	/* Set the timer running */
+	bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		   IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	sb1250_unmask_irq(cpu, irq);
+	sb1250_steal_irq(irq);
+	/*
+	 * This interrupt is "special" in that it doesn't use the request_irq
+	 * way to hook the irq line.  The timer interrupt is initialized early
+	 * enough to make this a major pain, and it's also firing enough to
+	 * warrant a bit of special case code.  sb1250_timer_interrupt is
+	 * called directly from irq_handler.S when IP[4] is set during an
+	 * interrupt
+	 */
+}
+
+void sb1250_timer_interrupt(struct pt_regs *regs)
+{
+	extern asmlinkage void ll_local_timer_interrupt(int irq, struct pt_regs *regs);
+	int cpu = smp_processor_id();
+	int irq = K_INT_TIMER_0 + cpu;
+
+	/* Reset the timer */
+	__bus_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
+
+	/*
+	 * CPU 0 handles the global timer interrupt job
+	 */
+	if (cpu == 0) {
+		ll_timer_interrupt(irq, regs);
+	}
+
+	/*
+	 * every CPU should do profiling and process accouting
+	 */
+	ll_local_timer_interrupt(irq, regs);
+}
+
+/*
+ * We use our own do_gettimeoffset() instead of the generic one,
+ * because the generic one does not work for SMP case.
+ * In addition, since we use general timer 0 for system time,
+ * we can get accurate intra-jiffy offset without calibration.
+ */
+unsigned long sb1250_gettimeoffset(void)
+{
+	unsigned long count =
+		bus_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+
+	return 1000000/HZ - count;
+ }
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
new file mode 100644
index 000000000000..2d626039195c
--- /dev/null
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -0,0 +1,3 @@
+lib-y				= setup.o rtc_xicor1241.o rtc_m41t81.o
+
+lib-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
new file mode 100644
index 000000000000..75ce14c8eb69
--- /dev/null
+++ b/arch/mips/sibyte/swarm/dbg_io.c
@@ -0,0 +1,76 @@
+/*
+ * kgdb debug routines for SiByte boards.
+ *
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/* -------------------- BEGINNING OF CONFIG --------------------- */
+
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250_int.h>
+#include <asm/addrspace.h>
+
+/*
+ * We use the second serial port for kgdb traffic.
+ * 	115200, 8, N, 1.
+ */
+
+#define	BAUD_RATE		115200
+#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
+#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
+#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
+#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
+
+static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
+
+/* -------------------- END OF CONFIG --------------------- */
+extern int kgdb_port;
+
+#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
+
+void putDebugChar(unsigned char c);
+unsigned char getDebugChar(void);
+static void
+duart_init(int clk_divisor, int data, int parity, int stop)
+{
+	duart_out(R_DUART_MODE_REG_1, data | parity);
+	duart_out(R_DUART_MODE_REG_2, stop);
+	duart_out(R_DUART_CLK_SEL, clk_divisor);
+
+	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
+}
+
+void
+putDebugChar(unsigned char c)
+{
+	if (!duart_initialized) {
+		duart_initialized = 1;
+		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
+	}
+	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
+	duart_out(R_DUART_TX_HOLD, c);
+}
+
+unsigned char
+getDebugChar(void)
+{
+	if (!duart_initialized) {
+		duart_initialized = 1;
+		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
+	}
+	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
+	return duart_in(R_DUART_RX_HOLD);
+}
+
diff --git a/arch/mips/sibyte/swarm/rtc_m41t81.c b/arch/mips/sibyte/swarm/rtc_m41t81.c
new file mode 100644
index 000000000000..0e633ee8d83c
--- /dev/null
+++ b/arch/mips/sibyte/swarm/rtc_m41t81.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/bcd.h>
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+/* M41T81 definitions */
+
+/*
+ * Register bits
+ */
+
+#define M41T81REG_SC_ST		0x80		/* stop bit */
+#define M41T81REG_HR_CB		0x40		/* century bit */
+#define M41T81REG_HR_CEB	0x80		/* century enable bit */
+#define M41T81REG_CTL_S		0x20		/* sign bit */
+#define M41T81REG_CTL_FT	0x40		/* frequency test bit */
+#define M41T81REG_CTL_OUT	0x80		/* output level */
+#define M41T81REG_WD_RB0	0x01		/* watchdog resolution bit 0 */
+#define M41T81REG_WD_RB1	0x02		/* watchdog resolution bit 1 */
+#define M41T81REG_WD_BMB0	0x04		/* watchdog multiplier bit 0 */
+#define M41T81REG_WD_BMB1	0x08		/* watchdog multiplier bit 1 */
+#define M41T81REG_WD_BMB2	0x10		/* watchdog multiplier bit 2 */
+#define M41T81REG_WD_BMB3	0x20		/* watchdog multiplier bit 3 */
+#define M41T81REG_WD_BMB4	0x40		/* watchdog multiplier bit 4 */
+#define M41T81REG_AMO_ABE	0x20		/* alarm in "battery back-up mode" enable bit */
+#define M41T81REG_AMO_SQWE	0x40		/* square wave enable */
+#define M41T81REG_AMO_AFE	0x80		/* alarm flag enable flag */
+#define M41T81REG_ADT_RPT5	0x40		/* alarm repeat mode bit 5 */
+#define M41T81REG_ADT_RPT4	0x80		/* alarm repeat mode bit 4 */
+#define M41T81REG_AHR_RPT3	0x80		/* alarm repeat mode bit 3 */
+#define M41T81REG_AHR_HT	0x40		/* halt update bit */
+#define M41T81REG_AMN_RPT2	0x80		/* alarm repeat mode bit 2 */
+#define M41T81REG_ASC_RPT1	0x80		/* alarm repeat mode bit 1 */
+#define M41T81REG_FLG_AF	0x40		/* alarm flag (read only) */
+#define M41T81REG_FLG_WDF	0x80		/* watchdog flag (read only) */
+#define M41T81REG_SQW_RS0	0x10		/* sqw frequency bit 0 */
+#define M41T81REG_SQW_RS1	0x20		/* sqw frequency bit 1 */
+#define M41T81REG_SQW_RS2	0x40		/* sqw frequency bit 2 */
+#define M41T81REG_SQW_RS3	0x80		/* sqw frequency bit 3 */
+
+
+/*
+ * Register numbers
+ */
+
+#define M41T81REG_TSC	0x00		/* tenths/hundredths of second */
+#define M41T81REG_SC	0x01		/* seconds */
+#define M41T81REG_MN	0x02		/* minute */
+#define M41T81REG_HR	0x03		/* hour/century */
+#define M41T81REG_DY	0x04		/* day of week */
+#define M41T81REG_DT	0x05		/* date of month */
+#define M41T81REG_MO	0x06		/* month */
+#define M41T81REG_YR	0x07		/* year */
+#define M41T81REG_CTL	0x08		/* control */
+#define M41T81REG_WD	0x09		/* watchdog */
+#define M41T81REG_AMO	0x0A		/* alarm: month */
+#define M41T81REG_ADT	0x0B		/* alarm: date */
+#define M41T81REG_AHR	0x0C		/* alarm: hour */
+#define M41T81REG_AMN	0x0D		/* alarm: minute */
+#define M41T81REG_ASC	0x0E		/* alarm: second */
+#define M41T81REG_FLG	0x0F		/* flags */
+#define M41T81REG_SQW	0x13		/* square wave register */
+
+#define M41T81_CCR_ADDRESS	0x68
+#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+static int m41t81_read(uint8_t addr)
+{
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	bus_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD));
+	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE),
+		   SMB_CSR(R_SMB_START));
+
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	bus_writeq((V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+		   SMB_CSR(R_SMB_START));
+
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	}
+
+	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int m41t81_write(uint8_t addr, int b)
+{
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	bus_writeq((addr & 0xFF), SMB_CSR(R_SMB_CMD));
+	bus_writeq((b & 0xff), SMB_CSR(R_SMB_DATA));
+	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
+		   SMB_CSR(R_SMB_START));
+
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+		return -1;
+	} 
+
+	/* read the same byte again to make sure it is written */
+	bus_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
+		   SMB_CSR(R_SMB_START));
+
+	while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+	
+	return 0;
+}
+
+int m41t81_set_time(unsigned long t)
+{
+	struct rtc_time tm;
+
+	to_tm(t, &tm);
+
+	/*
+	 * Note the write order matters as it ensures the correctness.
+	 * When we write sec, 10th sec is clear.  It is reasonable to 
+	 * believe we should finish writing min within a second.
+	 */
+
+	tm.tm_sec = BIN2BCD(tm.tm_sec);
+	m41t81_write(M41T81REG_SC, tm.tm_sec);
+	
+	tm.tm_min = BIN2BCD(tm.tm_min);
+	m41t81_write(M41T81REG_MN, tm.tm_min);
+
+	tm.tm_hour = BIN2BCD(tm.tm_hour);
+	tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0);
+	m41t81_write(M41T81REG_HR, tm.tm_hour);
+
+	/* tm_wday starts from 0 to 6 */
+	if (tm.tm_wday == 0) tm.tm_wday = 7;
+	tm.tm_wday = BIN2BCD(tm.tm_wday);
+	m41t81_write(M41T81REG_DY, tm.tm_wday);
+
+	tm.tm_mday = BIN2BCD(tm.tm_mday);
+	m41t81_write(M41T81REG_DT, tm.tm_mday);
+
+	/* tm_mon starts from 0, *ick* */
+	tm.tm_mon ++;
+	tm.tm_mon = BIN2BCD(tm.tm_mon);
+	m41t81_write(M41T81REG_MO, tm.tm_mon);
+
+	/* we don't do century, everything is beyond 2000 */
+	tm.tm_year %= 100;
+	tm.tm_year = BIN2BCD(tm.tm_year);
+	m41t81_write(M41T81REG_YR, tm.tm_year);
+
+	return 0;
+}
+
+unsigned long m41t81_get_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+
+	/* 
+	 * min is valid if two reads of sec are the same.
+	 */
+	for (;;) {
+		sec = m41t81_read(M41T81REG_SC);
+		min = m41t81_read(M41T81REG_MN);
+		if (sec == m41t81_read(M41T81REG_SC)) break;
+	}
+	hour = m41t81_read(M41T81REG_HR) & 0x3f;
+	day = m41t81_read(M41T81REG_DT);
+	mon = m41t81_read(M41T81REG_MO);
+	year = m41t81_read(M41T81REG_YR);
+
+	sec = BCD2BIN(sec);
+	min = BCD2BIN(min);
+	hour = BCD2BIN(hour);
+	day = BCD2BIN(day);
+	mon = BCD2BIN(mon);
+	year = BCD2BIN(year);
+
+	year += 2000;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+int m41t81_probe(void)
+{
+	unsigned int tmp;
+
+	/* enable chip if it is not enabled yet */
+	tmp = m41t81_read(M41T81REG_SC);
+	m41t81_write(M41T81REG_SC, tmp & 0x7f);
+
+	return (m41t81_read(M41T81REG_SC) != -1);
+}
diff --git a/arch/mips/sibyte/swarm/rtc_xicor1241.c b/arch/mips/sibyte/swarm/rtc_xicor1241.c
new file mode 100644
index 000000000000..981d21f16e64
--- /dev/null
+++ b/arch/mips/sibyte/swarm/rtc_xicor1241.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/bcd.h>
+#include <linux/types.h>
+#include <linux/time.h>
+
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+
+/* Xicor 1241 definitions */
+
+/*
+ * Register bits
+ */
+
+#define X1241REG_SR_BAT	0x80		/* currently on battery power */
+#define X1241REG_SR_RWEL 0x04		/* r/w latch is enabled, can write RTC */
+#define X1241REG_SR_WEL 0x02		/* r/w latch is unlocked, can enable r/w now */
+#define X1241REG_SR_RTCF 0x01		/* clock failed */
+#define X1241REG_BL_BP2 0x80		/* block protect 2 */
+#define X1241REG_BL_BP1 0x40		/* block protect 1 */
+#define X1241REG_BL_BP0 0x20		/* block protect 0 */
+#define X1241REG_BL_WD1	0x10
+#define X1241REG_BL_WD0	0x08
+#define X1241REG_HR_MIL 0x80		/* military time format */
+
+/*
+ * Register numbers
+ */
+
+#define X1241REG_BL	0x10		/* block protect bits */
+#define X1241REG_INT	0x11		/*  */
+#define X1241REG_SC	0x30		/* Seconds */
+#define X1241REG_MN	0x31		/* Minutes */
+#define X1241REG_HR	0x32		/* Hours */
+#define X1241REG_DT	0x33		/* Day of month */
+#define X1241REG_MO	0x34		/* Month */
+#define X1241REG_YR	0x35		/* Year */
+#define X1241REG_DW	0x36		/* Day of Week */
+#define X1241REG_Y2K	0x37		/* Year 2K */
+#define X1241REG_SR	0x3F		/* Status register */
+
+#define X1241_CCR_ADDRESS	0x6F
+
+#define SMB_CSR(reg) ((u8 *) (IOADDR(A_SMB_REGISTER(1, reg))))
+
+static int xicor_read(uint8_t addr)
+{
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
+	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+                /* Clear error bit by writing a 1 */
+                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                return -1;
+        }
+
+	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int xicor_write(uint8_t addr, int b)
+{
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
+	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+                /* Clear error bit by writing a 1 */
+                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                return -1;
+        } else {
+		return 0;
+	}
+}
+
+int xicor_set_time(unsigned long t)
+{
+	struct rtc_time tm;
+	int tmp;
+
+	to_tm(t, &tm);
+
+	/* unlock writes to the CCR */
+	xicor_write(X1241REG_SR, X1241REG_SR_WEL);
+	xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
+
+	/* trivial ones */
+	tm.tm_sec = BIN2BCD(tm.tm_sec);
+	xicor_write(X1241REG_SC, tm.tm_sec);
+
+	tm.tm_min = BIN2BCD(tm.tm_min);
+	xicor_write(X1241REG_MN, tm.tm_min);
+
+	tm.tm_mday = BIN2BCD(tm.tm_mday);
+	xicor_write(X1241REG_DT, tm.tm_mday);
+
+	/* tm_mon starts from 0, *ick* */
+	tm.tm_mon ++;
+	tm.tm_mon = BIN2BCD(tm.tm_mon);
+	xicor_write(X1241REG_MO, tm.tm_mon);
+
+	/* year is split */
+	tmp = tm.tm_year / 100;
+	tm.tm_year %= 100;
+	xicor_write(X1241REG_YR, tm.tm_year);
+	xicor_write(X1241REG_Y2K, tmp);
+
+	/* hour is the most tricky one */
+	tmp = xicor_read(X1241REG_HR);
+	if (tmp & X1241REG_HR_MIL) {
+		/* 24 hour format */
+		tm.tm_hour = BIN2BCD(tm.tm_hour);
+		tmp = (tmp & ~0x3f) | (tm.tm_hour & 0x3f);
+	} else {
+		/* 12 hour format, with 0x2 for pm */
+		tmp = tmp & ~0x3f;
+		if (tm.tm_hour >= 12) {
+			tmp |= 0x20;
+			tm.tm_hour -= 12;
+		}
+		tm.tm_hour = BIN2BCD(tm.tm_hour);
+		tmp |= tm.tm_hour;
+	}
+	xicor_write(X1241REG_HR, tmp);
+
+	xicor_write(X1241REG_SR, 0);
+
+	return 0;
+}
+
+unsigned long xicor_get_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec, y2k;
+
+	sec = xicor_read(X1241REG_SC);
+	min = xicor_read(X1241REG_MN);
+	hour = xicor_read(X1241REG_HR);
+
+	if (hour & X1241REG_HR_MIL) {
+		hour &= 0x3f;
+	} else {
+		if (hour & 0x20)
+			hour = (hour & 0xf) + 0x12;
+	}
+
+	day = xicor_read(X1241REG_DT);
+	mon = xicor_read(X1241REG_MO);
+	year = xicor_read(X1241REG_YR);
+	y2k = xicor_read(X1241REG_Y2K);
+
+	sec = BCD2BIN(sec);
+	min = BCD2BIN(min);
+	hour = BCD2BIN(hour);
+	day = BCD2BIN(day);
+	mon = BCD2BIN(mon);
+	year = BCD2BIN(year);
+	y2k = BCD2BIN(y2k);
+
+	year += (y2k * 100);
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+int xicor_probe(void)
+{
+	return (xicor_read(X1241REG_SC) != -1);
+}
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
new file mode 100644
index 000000000000..457aeb7be858
--- /dev/null
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * Setup code for the SWARM board
+ */
+
+#include <linux/config.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/blkdev.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/initrd.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/traps.h>
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_genbus.h>
+#include <asm/sibyte/board.h>
+
+extern void sb1250_setup(void);
+
+extern int xicor_probe(void);
+extern int xicor_set_time(unsigned long);
+extern unsigned long xicor_get_time(void);
+
+extern int m41t81_probe(void);
+extern int m41t81_set_time(unsigned long);
+extern unsigned long m41t81_get_time(void);
+
+const char *get_system_type(void)
+{
+	return "SiByte " SIBYTE_BOARD_NAME;
+}
+
+void __init swarm_timer_setup(struct irqaction *irq)
+{
+        /*
+         * we don't set up irqaction, because we will deliver timer
+         * interrupts through low-level (direct) meachanism.
+         */
+
+        /* We only need to setup the generic timer */
+        sb1250_time_init();
+}
+
+int swarm_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	if (!is_fixup && (regs->cp0_cause & 4)) {
+		/* Data bus error - print PA */
+#ifdef CONFIG_MIPS64
+		printk("DBE physical address: %010lx\n",
+		       __read_64bit_c0_register($26, 1));
+#else
+		printk("DBE physical address: %010llx\n",
+		       __read_64bit_c0_split($26, 1));
+#endif
+	}
+	return (is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL);
+}
+
+static int __init swarm_setup(void)
+{
+	sb1250_setup();
+
+	panic_timeout = 5;  /* For debug.  */
+
+	board_timer_setup = swarm_timer_setup;
+	board_be_handler = swarm_be_handler;
+
+	if (xicor_probe()) {
+		printk("swarm setup: Xicor 1241 RTC detected.\n");
+		rtc_get_time = xicor_get_time;
+		rtc_set_time = xicor_set_time;
+	}
+ 
+	if (m41t81_probe()) {
+		printk("swarm setup: M41T81 RTC detected.\n");
+		rtc_get_time = m41t81_get_time;
+		rtc_set_time = m41t81_set_time;
+	}
+
+	printk("This kernel optimized for "
+#ifdef CONFIG_SIMULATION
+	       "simulation"
+#else
+	       "board"
+#endif
+	       " runs "
+#ifdef CONFIG_SIBYTE_CFE
+	       "with"
+#else
+	       "without"
+#endif
+	       " CFE\n");
+
+#ifdef CONFIG_VT
+	screen_info = (struct screen_info) {
+		0, 0,           /* orig-x, orig-y */
+		0,              /* unused */
+		52,             /* orig_video_page */
+		3,              /* orig_video_mode */
+		80,             /* orig_video_cols */
+		4626, 3, 9,     /* unused, ega_bx, unused */
+		25,             /* orig_video_lines */
+		0x22,           /* orig_video_isVGA */
+		16              /* orig_video_points */
+       };
+       /* XXXKW for CFE, get lines/cols from environment */
+#endif
+
+	return 0;
+}
+
+early_initcall(swarm_setup);
+
+#ifdef LEDS_PHYS
+
+#ifdef CONFIG_SIBYTE_CARMEL
+/* XXXKW need to detect Monterey/LittleSur/etc */
+#undef LEDS_PHYS
+#define LEDS_PHYS MLEDS_PHYS
+#endif
+
+#define setled(index, c) \
+  ((unsigned char *)(IOADDR(LEDS_PHYS)+0x20))[(3-(index))<<3] = (c)
+void setleds(char *str)
+{
+	int i;
+	for (i = 0; i < 4; i++) {
+		if (!str[i]) {
+			setled(i, ' ');
+		} else {
+			setled(i, str[i]);
+		}
+	}
+}
+#endif
diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c
new file mode 100644
index 000000000000..c1f1a9defeeb
--- /dev/null
+++ b/arch/mips/sibyte/swarm/time.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * Time routines for the swarm board.  We pass all the hard stuff
+ * through to the sb1250 handling code.  Only thing we really keep
+ * track of here is what time of day we think it is.  And we don't
+ * really even do a good job of that...
+ */
+
+
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/sb1250.h>
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_smbus.h>
+
+static unsigned long long sec_bias = 0;
+static unsigned int usec_bias = 0;
+
+/* Xicor 1241 definitions */
+
+/*
+ * Register bits
+ */
+
+#define X1241REG_SR_BAT	0x80		/* currently on battery power */
+#define X1241REG_SR_RWEL 0x04		/* r/w latch is enabled, can write RTC */
+#define X1241REG_SR_WEL 0x02		/* r/w latch is unlocked, can enable r/w now */
+#define X1241REG_SR_RTCF 0x01		/* clock failed */
+#define X1241REG_BL_BP2 0x80		/* block protect 2 */
+#define X1241REG_BL_BP1 0x40		/* block protect 1 */
+#define X1241REG_BL_BP0 0x20		/* block protect 0 */
+#define X1241REG_BL_WD1	0x10
+#define X1241REG_BL_WD0	0x08
+#define X1241REG_HR_MIL 0x80		/* military time format */
+
+/*
+ * Register numbers
+ */
+
+#define X1241REG_BL	0x10		/* block protect bits */
+#define X1241REG_INT	0x11		/*  */
+#define X1241REG_SC	0x30		/* Seconds */
+#define X1241REG_MN	0x31		/* Minutes */
+#define X1241REG_HR	0x32		/* Hours */
+#define X1241REG_DT	0x33		/* Day of month */
+#define X1241REG_MO	0x34		/* Month */
+#define X1241REG_YR	0x35		/* Year */
+#define X1241REG_DW	0x36		/* Day of Week */
+#define X1241REG_Y2K	0x37		/* Year 2K */
+#define X1241REG_SR	0x3F		/* Status register */
+
+#define X1241_CCR_ADDRESS	0x6F
+
+#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg)))
+
+static int xicor_read(uint8_t addr)
+{
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
+	bus_writeq((addr & 0xff), SMB_CSR(R_SMB_DATA));
+	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE),
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq((V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE),
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+                /* Clear error bit by writing a 1 */
+                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                return -1;
+        }
+
+	return (bus_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
+}
+
+static int xicor_write(uint8_t addr, int b)
+{
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+	bus_writeq(addr, SMB_CSR(R_SMB_CMD));
+	bus_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
+	bus_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
+		   SMB_CSR(R_SMB_START));
+
+        while (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
+                ;
+
+        if (bus_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
+                /* Clear error bit by writing a 1 */
+                bus_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
+                return -1;
+        } else {
+		return 0;
+	}
+}
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+int set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+
+	cmos_minutes = xicor_read(X1241REG_MN);
+	cmos_minutes = BCD2BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	/* unlock writes to the CCR */
+	xicor_write(X1241REG_SR, X1241REG_SR_WEL);
+	xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		real_seconds = BIN2BCD(real_seconds);
+		real_minutes = BIN2BCD(real_minutes);
+		xicor_write(X1241REG_SC, real_seconds);
+		xicor_write(X1241REG_MN, real_minutes);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	xicor_write(X1241REG_SR, 0);
+
+	printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
+
+	return retval;
+}
+
+static unsigned long __init get_swarm_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec, y2k;
+
+	sec = xicor_read(X1241REG_SC);
+	min = xicor_read(X1241REG_MN);
+	hour = xicor_read(X1241REG_HR);
+
+	if (hour & X1241REG_HR_MIL) {
+		hour &= 0x3f;
+	} else {
+		if (hour & 0x20)
+			hour = (hour & 0xf) + 0x12;
+	}
+
+	sec = BCD2BIN(sec);
+	min = BCD2BIN(min);
+	hour = BCD2BIN(hour);
+
+	day = xicor_read(X1241REG_DT);
+	mon = xicor_read(X1241REG_MO);
+	year = xicor_read(X1241REG_YR);
+	y2k = xicor_read(X1241REG_Y2K);
+
+	day = BCD2BIN(day);
+	mon = BCD2BIN(mon);
+	year = BCD2BIN(year);
+	y2k = BCD2BIN(y2k);
+
+	year += (y2k * 100);
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+/*
+ *  Bring up the timer at 100 Hz.
+ */
+void __init swarm_time_init(void)
+{
+	unsigned int flags;
+	int status;
+
+	/* Set up the scd general purpose timer 0 to cpu 0 */
+	sb1250_time_init();
+
+	/* Establish communication with the Xicor 1241 RTC */
+	/* XXXKW how do I share the SMBus with the I2C subsystem? */
+
+	bus_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
+	bus_writeq(0, SMB_CSR(R_SMB_CONTROL));
+
+	if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
+		printk("x1241: couldn't detect on SWARM SMBus 1\n");
+	} else {
+		if (status & X1241REG_SR_RTCF)
+			printk("x1241: battery failed -- time is probably wrong\n");
+		write_seqlock_irqsave(&xtime_lock, flags);
+		xtime.tv_sec = get_swarm_time();
+		xtime.tv_nsec = 0;
+		write_sequnlock_irqrestore(&xtime_lock, flags);
+	}
+}