Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

8 files changed, 1124 insertions, 0 deletions

diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 000000000000..8f0b6b6a1625
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 000000000000..44fb0a62877f
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,331 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char *board_type;
+
+static struct resource korina_dev0_res[] = {
+	{
+		.name = "korina_regs",
+		.start = ETH0_BASE_ADDR,
+		.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_rx",
+		.start = ETH0_DMA_RX_IRQ,
+		.end = ETH0_DMA_RX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_tx",
+		.start = ETH0_DMA_TX_IRQ,
+		.end = ETH0_DMA_TX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_ovr",
+		.start = ETH0_RX_OVR_IRQ,
+		.end = ETH0_RX_OVR_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_und",
+		.start = ETH0_TX_UND_IRQ,
+		.end = ETH0_TX_UND_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_dma_rx",
+		.start = ETH0_RX_DMA_ADDR,
+		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_dma_tx",
+		.start = ETH0_TX_DMA_ADDR,
+		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }
+};
+
+static struct korina_device korina_dev0_data = {
+	.name = "korina0",
+	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+	.id = 0,
+	.name = "korina",
+	.dev.platform_data = &korina_dev0_data,
+	.resource = korina_dev0_res,
+	.num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+	{
+		.name = "cf_membase",
+		.flags = IORESOURCE_MEM
+	}, {
+		.name = "cf_irq",
+		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
+		.end = (8 + 4 * 32 + CF_GPIO_NUM),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct cf_device cf_slot0_data = {
+	.gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+	.id = 0,
+	.name = "pata-rb532-cf",
+	.dev.platform_data = &cf_slot0_data,
+	.resource = cf_slot0_res,
+	.num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned char orbits, nandbits;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		orbits = (ctrl & NAND_CLE) << 1;
+		orbits |= (ctrl & NAND_ALE) >> 1;
+
+		nandbits = (~ctrl & NAND_CLE) << 1;
+		nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+		set_latch_u5(orbits, nandbits);
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+	[0] = {
+		.name = "nand_membase",
+		.flags = IORESOURCE_MEM
+	}
+};
+
+static struct platform_nand_data rb532_nand_data = {
+	.ctrl.dev_ready = rb532_dev_ready,
+	.ctrl.cmd_ctrl	= rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+	.name = "gen_nand",
+	.id = -1,
+	.resource = nand_slot0_res,
+	.num_resources = ARRAY_SIZE(nand_slot0_res),
+	.dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+	{
+		.name = "Routerboard NAND boot",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device rb532_led = {
+	.name = "rb532-led",
+	.id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+	{
+		.gpio = 1,
+		.code = BTN_0,
+		.desc = "S1",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+	.buttons = rb532_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+	.name 	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rb532_gpio_btn_data,
+	}
+};
+
+static struct resource rb532_wdt_res[] = {
+	{
+		.name = "rb532_wdt_res",
+		.start = INTEG0_BASE_ADDR,
+		.end = INTEG0_BASE_ADDR + sizeof(struct integ),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rb532_wdt = {
+	.name 		= "rc32434_wdt",
+	.id 		= -1,
+	.resource 	= rb532_wdt_res,
+	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+	&korina_dev0,
+	&nand_slot0,
+	&cf_slot0,
+	&rb532_led,
+	&rb532_button,
+	&rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+	int i, j;
+	unsigned char result, value;
+
+	for (i = 0; i < 6; i++) {
+		result = 0;
+
+		if (i != 5 && *(macstr + 2) != ':')
+			return;
+
+		for (j = 0; j < 2; j++) {
+			if (isxdigit(*macstr)
+			    && (value =
+				isdigit(*macstr) ? *macstr -
+				'0' : toupper(*macstr) - 'A' + 10) < 16) {
+				result = result * 16 + value;
+				macstr++;
+			} else
+				return;
+		}
+
+		macstr++;
+		korina_dev0_data.mac[i] = result;
+	}
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1 	((void *)0xb8010010)
+#define CFG_DC_DEV2 	((void *)0xb8010020)
+#define CFG_DC_DEVBASE    0x0
+#define CFG_DC_DEVMASK    0x4
+#define CFG_DC_DEVC       0x8
+#define CFG_DC_DEVTC      0xC
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY	25
+
+static void __init rb532_nand_setup(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		set_latch_u5(LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+		break;
+	default:
+		set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE);
+		break;
+	}
+
+	/* Setup NAND specific settings */
+	rb532_nand_data.chip.nr_chips = 1;
+	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+	rb532_nand_data.chip.partitions = rb532_partition_info;
+	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+	/* Look for the CF card reader */
+	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+		rb532_devs[1] = NULL;
+	else {
+		cf_slot0_res[0].start =
+		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+	}
+
+	/* Read the NAND resources from the device controller */
+	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+	/* Initialise the NAND device */
+	rb532_nand_setup();
+
+	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+	printk(KERN_INFO "korina mac = %s\n", s);
+	parse_mac_addr(s);
+	return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 000000000000..b2fe82dba0a5
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,220 @@
+/*
+ *  Miscellaneous functions for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+	{
+		.name 	= "gpio_reg0",
+		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
+		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.flags 	= IORESOURCE_MEM,
+	}
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+	{
+		.name	= "dev3_ctl",
+		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
+		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+	unsigned flags, data;
+	unsigned i = 0;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+	for (i = 0; i != len; ++i) {
+		if (val & (1 << i))
+			data |= (1 << (i + bit));
+		else
+			data &= ~(1 << (i + bit));
+	}
+	writel(data, (IDT434_REG_BASE + reg_offs));
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+	return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+	unsigned flags;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+	writel(dev3.state, &dev3.base);
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+	return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioistat);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+				rb532_gpio_reg0_res[0].end -
+				rb532_gpio_reg0_res[0].start);
+
+	if (!rb532_gpio_reg0) {
+		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+		return -ENXIO;
+	}
+
+	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+				rb532_dev3_ctl_res[0].end -
+				rb532_dev3_ctl_res[0].start);
+
+	if (!dev3.base) {
+		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 000000000000..c0d0f950caf2
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+	u32 mask;	/* mask of valid bits in pending/mask registers */
+	volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+	{
+		.mask	= 0x0000efff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00001fff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00000007,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x0003ffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0xffffffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+	return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+	return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit;
+	volatile unsigned int *addr;
+
+	if (ip < 0)
+		enable_local_irq(irq_nr);
+	else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+
+		enable_local_irq(group_to_ip(group));
+
+		addr = intr_group[group].base_addr;
+		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+	}
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit, mask;
+	volatile unsigned int *addr;
+
+	if (ip < 0) {
+		disable_local_irq(irq_nr);
+	} else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+		addr = intr_group[group].base_addr;
+		mask = READ_MASK(addr);
+		mask |= intr_bit;
+		WRITE_MASK(addr, mask);
+
+		/*
+		 * if there are no more interrupts enabled in this
+		 * group, disable corresponding IP
+		 */
+		if (mask == intr_group[group].mask)
+			disable_local_irq(group_to_ip(group));
+	}
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+	rb532_disable_irq(irq_nr);
+	ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+	.name		= "RB532",
+	.ack		= rb532_disable_irq,
+	.mask		= rb532_disable_irq,
+	.mask_ack	= rb532_mask_and_ack_irq,
+	.unmask		= rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+	for (i = 0; i < RC32434_NR_IRQS; i++)
+		set_irq_chip_and_handler(i,  &rc32434_irq_type,
+					handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int ip, pend, group;
+	volatile unsigned int *addr;
+	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+	if (cp0_cause & CAUSEF_IP7) {
+		do_IRQ(7);
+	} else {
+		ip = (cp0_cause & 0x7c00);
+		if (ip) {
+			group = 21 + (fls(ip) - 32);
+
+			addr = intr_group[group].base_addr;
+
+			pend = READ_PEND(addr);
+			pend &= ~READ_MASK(addr);	/* only unmasked interrupts */
+			pend = 39 + (fls(pend) - 32);
+			do_IRQ((group << 5) + pend);
+		}
+	}
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 000000000000..1bc0af8febf4
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ *  RouterBoard 500 specific prom routines
+ *
+ *  Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ *  Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ *  Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ *			Felix Fietkau <nbd@openwrt.org>
+ *			Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+	{
+		.name = "ddr-reg",
+		.start = DDR0_PHYS_ADDR,
+		.end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+void __init prom_free_prom_memory(void)
+{
+	/* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+	return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+	char *num;
+
+	num = arg + strlen(tag);
+	return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+	char cmd_line[CL_SIZE];
+	char *cp, *board;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	cp = cmd_line;
+		/* Note: it is common that parameters start
+		 * at argv[1] and not argv[0],
+		 * however, our elf loader starts at [0] */
+	for (i = 0; i < prom_argc; i++) {
+		if (match_tag(prom_argv[i], FREQ_TAG)) {
+			idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (match_tag(prom_argv[i], MEM_TAG))
+			continue;
+#endif
+		if (i > 0)
+			*(cp++) = ' ';
+		if (match_tag(prom_argv[i], BOARD_TAG)) {
+			board = prom_argv[i] + strlen(BOARD_TAG);
+
+			if (match_tag(board, BOARD_RB532A))
+				mips_machtype = MACH_MIKROTIK_RB532A;
+			else
+				mips_machtype = MACH_MIKROTIK_RB532;
+		}
+
+		if (match_tag(prom_argv[i], GPIO_TAG))
+			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+		strcpy(cp, prom_argv[i]);
+		cp += strlen(prom_argv[i]);
+	}
+	*(cp++) = ' ';
+
+	i = strlen(arcs_cmdline);
+	if (i > 0) {
+		*(cp++) = ' ';
+		strcpy(cp, arcs_cmdline);
+		cp += strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state & 0x02)
+		strcpy(cp, GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp, GPIO_INIT_BUTTON);
+
+	cmd_line[CL_SIZE-1] = '\0';
+
+	strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+	struct ddr_ram __iomem *ddr;
+	phys_t memsize;
+	phys_t ddrbase;
+
+	ddr = ioremap_nocache(ddr_reg[0].start,
+			ddr_reg[0].end - ddr_reg[0].start);
+
+	if (!ddr) {
+		printk(KERN_ERR "Unable to remap DDR register\n");
+		return;
+	}
+
+	ddrbase = (phys_t)&ddr->ddrbase;
+	memsize = (phys_t)&ddr->ddrmask;
+	memsize = 0 - memsize;
+
+	prom_setup_cmdline();
+
+	/* give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes */
+	add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 000000000000..1a05b5ddee09
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,53 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+	.type = PORT_16550A,
+	.line = 0,
+	.irq = RC32434_UART0_IRQ,
+	.iotype = UPIO_MEM,
+	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+	.regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+	rb532_uart.uartclk = idt_cpu_freq;
+
+	return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000000..7aafa95ac20b
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+	{
+		.name = "pci_reg0",
+		.start = PCI0_BASE_ADDR,
+		.end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for (;;)
+		continue;
+}
+
+void __init plat_mem_setup(void)
+{
+	u32 val;
+
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pci_reg = ioremap_nocache(pci0_res[0].start,
+				pci0_res[0].end - pci0_res[0].start);
+	if (!pci_reg) {
+		printk(KERN_ERR "Could not remap PCI registers\n");
+		return;
+	}
+
+	val = __raw_readl(&pci_reg->pcic);
+	val &= 0xFFFFFF7;
+	__raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epld_mask = 0x0;
+	*(epld_mask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		return "Mikrotik RB532A";
+		break;
+	default:
+		return "Mikrotik RB532";
+		break;
+	}
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 000000000000..db74edf8cefb
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *  Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+	return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+	unsigned int est_freq, flags;
+	unsigned long r4k_offset;
+
+	local_irq_save(flags);
+
+	printk(KERN_INFO "calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2 * r4k_offset * HZ;
+	est_freq += 5000;	/* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
+	local_irq_restore(flags);
+}