summaryrefslogtreecommitdiffstats
path: root/arch/mips/ralink
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-15 09:10:53 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-15 09:10:53 -0800
commitb84da9fa47cf6e8dfd71d673a2f744ec1cac452c (patch)
tree800a1cb1e939eb84f7e7018be64e94be5c972ca0 /arch/mips/ralink
parent12b76f3bf336388916ddf8047156f9e9993ff4e9 (diff)
parentda34232641a91ca785a787c23c158488e459b938 (diff)
downloadlinux-b84da9fa47cf6e8dfd71d673a2f744ec1cac452c.tar.bz2
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: "These are the highlists of the main MIPS pull request for 4.4: - Add latencytop support - Support appended DTBs - VDSO support and initially use it for gettimeofday. - Drop the .MIPS.abiflags and ELF NOTE sections from vmlinux - Support for the 5KE, an internal test core. - Switch all MIPS platfroms to libata drivers. - Improved support, cleanups for ralink and Lantiq platforms. - Support for the new xilfpga platform. - A number of DTB improvments for BMIPS. - Improved support for CM and CPS. - Minor JZ4740 and BCM47xx enhancements" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (120 commits) MIPS: idle: add case for CPU_5KE MIPS: Octeon: Support APPENDED_DTB MIPS: vmlinux: create a section for appended DTB MIPS: Clean up compat_siginfo_t MIPS: Fix PAGE_MASK definition MIPS: BMIPS: Enable GZIP ramdisk and timed printks MIPS: Add xilfpga defconfig MIPS: xilfpga: Add mipsfpga platform code MIPS: xilfpga: Add xilfpga device tree files. dt-bindings: MIPS: Document xilfpga bindings and boot style MIPS: Make MIPS_CMDLINE_DTB default MIPS: Make the kernel arguments from dtb available MIPS: Use USE_OF as the guard for appended dtb MIPS: BCM63XX: Use pr_* instead of printk MIPS: Loongson: Cleanup CONFIG_LOONGSON_SUSPEND. MIPS: lantiq: Disable xbar fpi burst mode MIPS: lantiq: Force the crossbar to big endian MIPS: lantiq: Initialize the USB core on boot MIPS: lantiq: Return correct value for fpi clock on ar9 MIPS: ralink: Add missing clock on rt305x ...
Diffstat (limited to 'arch/mips/ralink')
-rw-r--r--arch/mips/ralink/cevt-rt3352.c2
-rw-r--r--arch/mips/ralink/early_printk.c26
-rw-r--r--arch/mips/ralink/mt7620.c63
-rw-r--r--arch/mips/ralink/of.c2
-rw-r--r--arch/mips/ralink/prom.c5
-rw-r--r--arch/mips/ralink/reset.c13
-rw-r--r--arch/mips/ralink/rt288x.c1
-rw-r--r--arch/mips/ralink/rt305x.c13
-rw-r--r--arch/mips/ralink/rt3883.c2
9 files changed, 101 insertions, 26 deletions
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
index a8e70a9f274b..e46f91f971c5 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -48,7 +48,7 @@ static int systick_next_event(unsigned long delta,
sdev = container_of(evt, struct systick_device, dev);
count = ioread32(sdev->membase + SYSTICK_COUNT);
count = (count + delta) % SYSTICK_FREQ;
- iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
+ iowrite32(count, sdev->membase + SYSTICK_COMPARE);
return 0;
}
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index 255d695ec8c6..3c59ffe5f5f5 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -25,11 +25,13 @@
#define MT7628_CHIP_NAME1 0x20203832
#define UART_REG_TX 0x04
+#define UART_REG_LCR 0x0c
#define UART_REG_LSR 0x14
#define UART_REG_LSR_RT2880 0x1c
static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
static inline void uart_w32(u32 val, unsigned reg)
{
@@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void)
(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
}
+static void find_uart_base(void)
+{
+ int i;
+
+ if (!soc_is_mt7628())
+ return;
+
+ for (i = 0; i < 3; i++) {
+ u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+ if (!reg)
+ continue;
+
+ uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+ (0x100 * i));
+ break;
+ }
+}
+
void prom_putchar(unsigned char ch)
{
+ if (!init_complete) {
+ find_uart_base();
+ init_complete = 1;
+ }
+
if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
uart_w32(ch, UART_TX);
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
index 2ea5ff6dc22e..dfb04fcedb04 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -37,8 +37,17 @@
#define PMU1_CFG 0x8C
#define DIG_SW_SEL BIT(25)
-/* is this a MT7620 or a MT7628 */
-enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK 0x1f00
+#define CLKCFG_FDIV_USB_VAL 0x0300
+#define CLKCFG_FFRAC_MASK 0x001f
+#define CLKCFG_FFRAC_USB_VAL 0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688 0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK 0x1
/* does the board have sdram or ddram */
static int dram_type;
@@ -227,6 +236,12 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
{ 0 }
};
+static inline int is_mt76x8(void)
+{
+ return ralink_soc == MT762X_SOC_MT7628AN ||
+ ralink_soc == MT762X_SOC_MT7688;
+}
+
static __init u32
mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
{
@@ -381,7 +396,7 @@ void __init ralink_clk_init(void)
#define RINT(x) ((x) / 1000000)
#define RFRAC(x) (((x) / 1000) % 1000)
- if (mt762x_soc == MT762X_SOC_MT7628AN) {
+ if (is_mt76x8()) {
if (xtal_rate == MHZ(40))
cpu_rate = MHZ(580);
else
@@ -423,6 +438,20 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
+
+ if (IS_ENABLED(CONFIG_USB) && is_mt76x8()) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be
+ * too low for USB to function properly. Adjust the busses
+ * fractional divider to fix this
+ */
+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+ }
}
void __init ralink_of_remap(void)
@@ -499,20 +528,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
if (bga) {
- mt762x_soc = MT762X_SOC_MT7620A;
+ ralink_soc = MT762X_SOC_MT7620A;
name = "MT7620A";
soc_info->compatible = "ralink,mt7620a-soc";
} else {
- mt762x_soc = MT762X_SOC_MT7620N;
+ ralink_soc = MT762X_SOC_MT7620N;
name = "MT7620N";
soc_info->compatible = "ralink,mt7620n-soc";
-#ifdef CONFIG_PCI
- panic("mt7620n is only supported for non pci kernels");
-#endif
}
} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- mt762x_soc = MT762X_SOC_MT7628AN;
- name = "MT7628AN";
+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+ if (efuse & EFUSE_MT7688) {
+ ralink_soc = MT762X_SOC_MT7688;
+ name = "MT7688";
+ } else {
+ ralink_soc = MT762X_SOC_MT7628AN;
+ name = "MT7628AN";
+ }
soc_info->compatible = "ralink,mt7628an-soc";
} else {
panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
@@ -525,10 +558,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
(rev & CHIP_REV_ECO_MASK));
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+ if (is_mt76x8())
+ dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+ else
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+ SYSCFG0_DRAM_TYPE_MASK;
soc_info->mem_base = MT7620_DRAM_BASE;
- if (mt762x_soc == MT762X_SOC_MT7628AN)
+ if (is_mt76x8())
mt7628_dram_init(soc_info);
else
mt7620_dram_init(soc_info);
@@ -541,7 +578,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
pr_info("Digital PMU set to %s control\n",
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
- if (mt762x_soc == MT762X_SOC_MT7628AN)
+ if (is_mt76x8())
rt2880_pinmux_data = mt7628an_pinmux_data;
else
rt2880_pinmux_data = mt7620a_pinmux_data;
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 0d30dcd63246..f9eda5d8f82c 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -74,8 +74,6 @@ void __init plat_mem_setup(void)
*/
__dt_setup_arch(__dtb_start);
- strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-
of_scan_flat_dt(early_init_dt_find_memory, NULL);
if (memory_dtb)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
index 09419f67da39..39a9142f71be 100644
--- a/arch/mips/ralink/prom.c
+++ b/arch/mips/ralink/prom.c
@@ -15,11 +15,16 @@
#include <asm/bootinfo.h>
#include <asm/addrspace.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
#include "common.h"
struct ralink_soc_info soc_info;
struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
const char *get_system_type(void)
{
return soc_info.sys_type;
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
index 55c7ec59df3c..ee117c4bc4a3 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
#include <linux/pm.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/delay.h>
#include <linux/reset-controller.h>
#include <asm/reboot.h>
@@ -18,8 +19,10 @@
#include <asm/mach-ralink/ralink_regs.h>
/* Reset Control */
-#define SYSC_REG_RESET_CTRL 0x034
-#define RSTCTL_RESET_SYSTEM BIT(0)
+#define SYSC_REG_RESET_CTRL 0x034
+
+#define RSTCTL_RESET_PCI BIT(26)
+#define RSTCTL_RESET_SYSTEM BIT(0)
static int ralink_assert_device(struct reset_controller_dev *rcdev,
unsigned long id)
@@ -83,6 +86,11 @@ void ralink_rst_init(void)
static void ralink_restart(char *command)
{
+ if (IS_ENABLED(CONFIG_PCI)) {
+ rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+ mdelay(50);
+ }
+
local_irq_disable();
rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
unreachable();
@@ -98,7 +106,6 @@ static int __init mips_reboot_setup(void)
{
_machine_restart = ralink_restart;
_machine_halt = ralink_halt;
- pm_power_off = ralink_halt;
return 0;
}
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
index 738cec865f41..844f5cd55c8f 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -119,4 +119,5 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
rt2880_pinmux_data = rt2880_pinmux_data_act;
+ ralink_soc == RT2880_SOC;
}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index c40776ab67db..9e4572592065 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
#include "common.h"
-enum rt305x_soc_type rt305x_soc;
-
static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
static struct rt2880_pmx_func uartf_func[] = {
@@ -201,6 +199,7 @@ void __init ralink_clk_init(void)
}
ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("sys", sys_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
@@ -235,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
icache_sets = (read_c0_config1() >> 22) & 7;
if (icache_sets == 1) {
- rt305x_soc = RT305X_SOC_RT3050;
+ ralink_soc = RT305X_SOC_RT3050;
name = "RT3050";
soc_info->compatible = "ralink,rt3050-soc";
} else {
- rt305x_soc = RT305X_SOC_RT3052;
+ ralink_soc = RT305X_SOC_RT3052;
name = "RT3052";
soc_info->compatible = "ralink,rt3052-soc";
}
} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT3350;
+ ralink_soc = RT305X_SOC_RT3350;
name = "RT3350";
soc_info->compatible = "ralink,rt3350-soc";
} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT3352;
+ ralink_soc = RT305X_SOC_RT3352;
name = "RT3352";
soc_info->compatible = "ralink,rt3352-soc";
} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
- rt305x_soc = RT305X_SOC_RT5350;
+ ralink_soc = RT305X_SOC_RT5350;
name = "RT5350";
soc_info->compatible = "ralink,rt5350-soc";
} else {
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
index 86a535c770d8..582995aaaf4e 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -153,4 +153,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
rt2880_pinmux_data = rt3883_pinmux_data;
+
+ ralink_soc == RT3883_SOC;
}