Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...

1 files changed, 0 insertions, 120 deletions

diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
deleted file mode 100644
index 93d8e7b73427..000000000000
--- a/arch/mips/pnx833x/stb22x/board.c
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  board.c: STB225 board support.
- *
- *  Copyright 2008 NXP Semiconductors
- *	  Chris Steel <chris.steel@nxp.com>
- *    Daniel Laird <daniel.j.laird@nxp.com>
- *
- *  Based on software written by:
- *	Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
- */
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <linux/mm.h>
-#include <pnx833x.h>
-#include <gpio.h>
-
-/* endianess twiddlers */
-#define PNX8335_DEBUG0 0x4400
-#define PNX8335_DEBUG1 0x4404
-#define PNX8335_DEBUG2 0x4408
-#define PNX8335_DEBUG3 0x440c
-#define PNX8335_DEBUG4 0x4410
-#define PNX8335_DEBUG5 0x4414
-#define PNX8335_DEBUG6 0x4418
-#define PNX8335_DEBUG7 0x441c
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-
-extern void prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-	return "NXP STB22x";
-}
-
-static inline unsigned long env_or_default(char *env, unsigned long dfl)
-{
-	char *str = prom_getenv(env);
-	return str ? simple_strtol(str, 0, 0) : dfl;
-}
-
-void __init prom_init(void)
-{
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize = env_or_default("memsize", 0x02000000);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
-
-void __init pnx833x_board_setup(void)
-{
-	pnx833x_gpio_select_function_alt(4);
-	pnx833x_gpio_select_output(4);
-	pnx833x_gpio_select_function_alt(5);
-	pnx833x_gpio_select_input(5);
-	pnx833x_gpio_select_function_alt(6);
-	pnx833x_gpio_select_input(6);
-	pnx833x_gpio_select_function_alt(7);
-	pnx833x_gpio_select_output(7);
-
-	pnx833x_gpio_select_function_alt(25);
-	pnx833x_gpio_select_function_alt(26);
-
-	pnx833x_gpio_select_function_alt(27);
-	pnx833x_gpio_select_function_alt(28);
-	pnx833x_gpio_select_function_alt(29);
-	pnx833x_gpio_select_function_alt(30);
-	pnx833x_gpio_select_function_alt(31);
-	pnx833x_gpio_select_function_alt(32);
-	pnx833x_gpio_select_function_alt(33);
-
-#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM)
-	/* Setup MIU for NAND access on CS0...
-	 *
-	 * (it seems that we must also configure CS1 for reliable operation,
-	 * otherwise the first read ID command will fail if it's read as 4 bytes
-	 * but pass if it's read as 1 word.)
-	 */
-
-	/* Setup MIU CS0 & CS1 timing */
-	PNX833X_MIU_SEL0 = 0;
-	PNX833X_MIU_SEL1 = 0;
-	PNX833X_MIU_SEL0_TIMING = 0x50003081;
-	PNX833X_MIU_SEL1_TIMING = 0x50003081;
-
-	/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
-	pnx833x_gpio_select_function_alt(0);
-
-	/* Setup GPIO 04 to input NAND read/busy signal */
-	pnx833x_gpio_select_function_io(4);
-	pnx833x_gpio_select_input(4);
-
-	/* Setup GPIO 05 to disable NAND write protect */
-	pnx833x_gpio_select_function_io(5);
-	pnx833x_gpio_select_output(5);
-	pnx833x_gpio_write(1, 5);
-
-#elif IS_ENABLED(CONFIG_MTD_CFI)
-
-	/* Set up MIU for 16-bit NOR access on CS0 and CS1... */
-
-	/* Setup MIU CS0 & CS1 timing */
-	PNX833X_MIU_SEL0 = 1;
-	PNX833X_MIU_SEL1 = 1;
-	PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
-	PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
-
-	/* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
-	pnx833x_gpio_select_function_alt(0);
-#endif
-}