diff options
| author | Tiezhu Yang <yangtiezhu@loongson.cn> | 2021-12-08 17:27:19 +0800 |
|---|---|---|
| committer | Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 2021-12-09 10:22:24 +0100 |
| commit | 09d97da660ff77df20984496aa0abcd6b88819f2 (patch) | |
| tree | f3bba8fec115fc731aa73d76653ac6e517b0689a /arch/mips/pci | |
| parent | d58071a8a76d779eedab38033ae4c821c30295a5 (diff) | |
| download | linux-09d97da660ff77df20984496aa0abcd6b88819f2.tar.bz2 | |
MIPS: Only define pci_remap_iospace() for Ralink
After commit 9f76779f2418 ("MIPS: implement architecture-specific
'pci_remap_iospace()'"), there exists the following warning on the
Loongson64 platform:
loongson-pci 1a000000.pci: IO 0x0018020000..0x001803ffff -> 0x0000020000
loongson-pci 1a000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at arch/mips/pci/pci-generic.c:55 pci_remap_iospace+0x84/0x90
resource start address is not zero
...
Call Trace:
[<ffffffff8020dc78>] show_stack+0x40/0x120
[<ffffffff80cf4a0c>] dump_stack_lvl+0x58/0x74
[<ffffffff8023a0b0>] __warn+0xe0/0x110
[<ffffffff80cee02c>] warn_slowpath_fmt+0xa4/0xd0
[<ffffffff80cecf24>] pci_remap_iospace+0x84/0x90
[<ffffffff807f9864>] devm_pci_remap_iospace+0x5c/0xb8
[<ffffffff808121b0>] devm_of_pci_bridge_init+0x178/0x1f8
[<ffffffff807f4000>] devm_pci_alloc_host_bridge+0x78/0x98
[<ffffffff80819454>] loongson_pci_probe+0x34/0x160
[<ffffffff809203cc>] platform_probe+0x6c/0xe0
[<ffffffff8091d5d4>] really_probe+0xbc/0x340
[<ffffffff8091d8f0>] __driver_probe_device+0x98/0x110
[<ffffffff8091d9b8>] driver_probe_device+0x50/0x118
[<ffffffff8091dea0>] __driver_attach+0x80/0x118
[<ffffffff8091b280>] bus_for_each_dev+0x80/0xc8
[<ffffffff8091c6d8>] bus_add_driver+0x130/0x210
[<ffffffff8091ead4>] driver_register+0x8c/0x150
[<ffffffff80200a8c>] do_one_initcall+0x54/0x288
[<ffffffff811a5320>] kernel_init_freeable+0x27c/0x2e4
[<ffffffff80cfc380>] kernel_init+0x2c/0x134
[<ffffffff80205a2c>] ret_from_kernel_thread+0x14/0x1c
---[ end trace e4a0efe10aa5cce6 ]---
loongson-pci 1a000000.pci: error -19: failed to map resource [io 0x20000-0x3ffff]
We can see that the resource start address is 0x0000020000, because
the ISA Bridge used the zero address which is defined in the dts file
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:
ISA Bridge: /bus@10000000/isa@18000000
IO 0x0000000018000000..0x000000001801ffff -> 0x0000000000000000
Based on the above analysis, the architecture-specific pci_remap_iospace()
is not suitable for Loongson64, we should only define pci_remap_iospace()
for Ralink on MIPS based on the commit background.
Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'")
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Diffstat (limited to 'arch/mips/pci')
| -rw-r--r-- | arch/mips/pci/pci-generic.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-generic.c b/arch/mips/pci/pci-generic.c index 18eb8a453a86..d2d68bac3d25 100644 --- a/arch/mips/pci/pci-generic.c +++ b/arch/mips/pci/pci-generic.c @@ -47,6 +47,7 @@ void pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } +#ifdef pci_remap_iospace int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) { unsigned long vaddr; @@ -60,3 +61,4 @@ int pci_remap_iospace(const struct resource *res, phys_addr_t phys_addr) set_io_port_base(vaddr); return 0; } +#endif |