Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...

1 files changed, 36 insertions, 13 deletions

diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
index 1d0b66c62fd1..9c401dd78337 100644
--- a/arch/mips/netlogic/xlp/usb-init.c
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -42,7 +42,30 @@
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlp-hal/iomap.h>
 #include <asm/netlogic/xlp-hal/xlp.h>
-#include <asm/netlogic/xlp-hal/usb.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0			0x01
+#define USB_PHY_0			0x0A
+#define USB_PHY_RESET			0x01
+#define USB_PHY_PORT_RESET_0		0x10
+#define USB_PHY_PORT_RESET_1		0x20
+#define USB_CONTROLLER_RESET		0x01
+#define USB_INT_STATUS			0x0E
+#define USB_INT_EN			0x0F
+#define USB_PHY_INTERRUPT_EN		0x01
+#define USB_OHCI_INTERRUPT_EN		0x02
+#define USB_OHCI_INTERRUPT1_EN		0x04
+#define USB_OHCI_INTERRUPT2_EN		0x08
+#define USB_CTRL_INTERRUPT_EN		0x10
+
+#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst)		\
+	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
 
 static void nlm_usb_intr_en(int node, int port)
 {
@@ -99,23 +122,23 @@ static void nlm_usb_fixup_final(struct pci_dev *dev)
 	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(64);
 	switch (dev->devfn) {
 	case 0x10:
-	       dev->irq = PIC_EHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_0_IRQ;
+		break;
 	case 0x11:
-	       dev->irq = PIC_OHCI_0_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_0_IRQ;
+		break;
 	case 0x12:
-	       dev->irq = PIC_OHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_1_IRQ;
+		break;
 	case 0x13:
-	       dev->irq = PIC_EHCI_1_IRQ;
-	       break;
+		dev->irq = PIC_EHCI_1_IRQ;
+		break;
 	case 0x14:
-	       dev->irq = PIC_OHCI_2_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_2_IRQ;
+		break;
 	case 0x15:
-	       dev->irq = PIC_OHCI_3_IRQ;
-	       break;
+		dev->irq = PIC_OHCI_3_IRQ;
+		break;
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,