Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.3 for MIPS.  Here's the summary:

  Three fixes that didn't make 4.2-stable:

   - a -Os build might compile the kernel using the MIPS16 instruction
     set but the R2 optimized inline functions in <uapi/asm/swab.h> are
     implemented using 32-bit wide instructions which is invalid.

   - a build error in pgtable-bits.h for a particular kernel
     configuration.

   - accessing registers of the CM GCR might have been compiled to use
     64 bit accesses but these registers are onl 32 bit wide.

  And also a few new bits:

   - move the ATH79 GPIO driver to drivers/gpio

   - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h,
     change ATH79 accordingly.

   - fix definition of pgprot_writecombine

   - add an implementation of dma_map_ops.mmap

   - fix alignment of quiet build output for vmlinuz link

   - BCM47xx: Use kmemdup rather than duplicating its implementation

   - Netlogic: Fix 0x0x prefixes of constants.

   - merge Bjorn Helgaas' series to remove most of the weak keywords
     from function declarations.

   - CP0 and CP1 registers are best considered treated as unsigned
     values to avoid large values from becoming negative values.

   - improve support for the MIPS GIC timer.

   - enable common clock framework for Malta and SEAD3.

   - a number of improvments and fixes to dump_tlb().

   - document the MIPS TLB dump functionality in Magic SysRq.

   - Cavium Octeon CN68XX improvments.

   - NetLogic improvments.

   - irq: Use access helper irq_data_get_affinity_mask.

   - handle MSA unaligned accesses.

   - a number of R6-related math-emu fixes.

   - support for I6400.

   - improvments to MSA support.

   - add uprobes support.

   - move from deprecated __initcall to arch_initcall.

   - remove finish_arch_switch().

   - IRQ cleanups by Thomas Gleixner.

   - migrate to new 'set-state' interface.

   - random small cleanups"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits)
  MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16.
  MIPS: Fix alignment of quiet build output for vmlinuz link
  MIPS: math-emu: Remove unused handle_dsemul function declaration
  MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction
  MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction
  MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction
  MIPS: inst.h: Add new MIPS R6 FPU opcodes
  MIPS: Octeon: Fix management port MII address on Kontron S1901
  MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation
  STAGING: Octeon: Use common helpers for determining interface and port
  MIPS: Octeon: Support interfaces 4 and 5
  MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports
  MIPS: Octeon: Initialize CN68XX PKO
  STAGING: Octeon: Support CN68XX style WQE
  ...

6 files changed, 117 insertions, 7 deletions

diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index fbea4432f3f2..5d3a25e1cfae 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1276,6 +1276,7 @@ static void probe_pcache(void)
 	case CPU_PROAPTIV:
 	case CPU_M5150:
 	case CPU_QEMU_GENERIC:
+	case CPU_I6400:
 		if (!(read_c0_config7() & MIPS_CONF7_IAR) &&
 		    (c->icache.waysize > PAGE_SIZE))
 			c->icache.flags |= MIPS_CACHE_ALIASES;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index eeaf0245c3b1..8f23cf08f4ba 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -194,6 +194,40 @@ static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 		__free_pages(page, get_order(size));
 }
 
+static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+	void *cpu_addr, dma_addr_t dma_addr, size_t size,
+	struct dma_attrs *attrs)
+{
+	unsigned long user_count = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long addr = (unsigned long)cpu_addr;
+	unsigned long off = vma->vm_pgoff;
+	unsigned long pfn;
+	int ret = -ENXIO;
+
+	if (!plat_device_is_coherent(dev) && !hw_coherentio)
+		addr = CAC_ADDR(addr);
+
+	pfn = page_to_pfn(virt_to_page((void *)addr));
+
+	if (dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs))
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
 static inline void __dma_sync_virtual(void *addr, size_t size,
 	enum dma_data_direction direction)
 {
@@ -380,6 +414,7 @@ EXPORT_SYMBOL(dma_cache_sync);
 static struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc = mips_dma_alloc_coherent,
 	.free = mips_dma_free_coherent,
+	.mmap = mips_dma_mmap,
 	.map_page = mips_dma_map_page,
 	.unmap_page = mips_dma_unmap_page,
 	.map_sg = mips_dma_map_sg,
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 852a41c6da45..4b88fa031891 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -57,12 +57,10 @@ static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write,
 
 #ifdef CONFIG_KPROBES
 	/*
-	 * This is to notify the fault handler of the kprobes.	The
-	 * exception code is redundant as it is also carried in REGS,
-	 * but we pass it anyhow.
+	 * This is to notify the fault handler of the kprobes.
 	 */
 	if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1,
-		       (regs->cp0_cause >> 2) & 0x1f, SIGSEGV) == NOTIFY_STOP)
+		       current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
 		return;
 #endif
 
@@ -224,6 +222,7 @@ bad_area_nosemaphore:
 			print_vma_addr(" ", regs->regs[31]);
 			pr_info("\n");
 		}
+		current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
 		info.si_signo = SIGSEGV;
 		info.si_errno = 0;
 		/* info.si_code has been set above */
@@ -282,6 +281,7 @@ do_sigbus:
 		       field, (unsigned long) regs->cp0_epc,
 		       field, (unsigned long) regs->regs[31]);
 #endif
+	current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f;
 	tsk->thread.cp0_badvaddr = address;
 	info.si_signo = SIGBUS;
 	info.si_errno = 0;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 198a3147dd7d..66d0f49c5bec 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -37,6 +37,7 @@
 #include <asm/cpu.h>
 #include <asm/dma.h>
 #include <asm/kmap_types.h>
+#include <asm/maar.h>
 #include <asm/mmu_context.h>
 #include <asm/sections.h>
 #include <asm/pgtable.h>
@@ -333,9 +334,40 @@ static inline void mem_init_free_highmem(void)
 #endif
 }
 
-unsigned __weak platform_maar_init(unsigned num_maars)
+unsigned __weak platform_maar_init(unsigned num_pairs)
 {
-	return 0;
+	struct maar_config cfg[BOOT_MEM_MAP_MAX];
+	unsigned i, num_configured, num_cfg = 0;
+	phys_addr_t skip;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+		case BOOT_MEM_INIT_RAM:
+			break;
+		default:
+			continue;
+		}
+
+		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+		cfg[num_cfg].lower += skip;
+
+		cfg[num_cfg].upper = cfg[num_cfg].lower;
+		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+		cfg[num_cfg].upper -= skip;
+
+		cfg[num_cfg].attrs = MIPS_MAAR_S;
+		num_cfg++;
+	}
+
+	num_configured = maar_config(cfg, num_cfg, num_pairs);
+	if (num_configured < num_cfg)
+		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+			num_pairs, num_cfg);
+
+	return num_configured;
 }
 
 static void maar_init(void)
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 4ceafd13870c..53ea8391f9bb 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -14,6 +14,7 @@
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
 #include <asm/r4kcache.h>
+#include <asm/mips-cm.h>
 
 /*
  * MIPS32/MIPS64 L2 cache handling
@@ -94,6 +95,38 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 	return 1;
 }
 
+static int __init mips_sc_probe_cm3(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned long cfg = read_gcr_l2_config();
+	unsigned long sets, line_sz, assoc;
+
+	if (cfg & CM_GCR_L2_CONFIG_BYPASS_MSK)
+		return 0;
+
+	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
+	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
+	c->scache.sets = 64 << sets;
+
+	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
+	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
+	c->scache.linesz = 2 << line_sz;
+
+	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
+	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
+	c->scache.ways = assoc + 1;
+	c->scache.waysize = c->scache.sets * c->scache.linesz;
+	c->scache.waybit = __ffs(c->scache.waysize);
+
+	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return 1;
+}
+
+void __weak platform_early_l2_init(void)
+{
+}
+
 static inline int __init mips_sc_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -103,6 +136,15 @@ static inline int __init mips_sc_probe(void)
 	/* Mark as not present until probe completed */
 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
 
+	/*
+	 * Do we need some platform specific probing before
+	 * we configure L2?
+	 */
+	platform_early_l2_init();
+
+	if (mips_cm_revision() >= CM_REV_CM3)
+		return mips_sc_probe_cm3();
+
 	/* Ignore anything but MIPSxx processors */
 	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
 			      MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 2b75b8f880ed..b4f366f7c0f5 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -36,7 +36,7 @@ extern void build_tlb_refill_handler(void);
 		"nop\n\t"		\
 		".set	pop\n\t")
 
-static int r3k_have_wired_reg;			/* Should be in cpu_data? */
+int r3k_have_wired_reg;			/* Should be in cpu_data? */
 
 /* TLB operations. */
 static void local_flush_tlb_from(int entry)