Merge branch 'mips-next' of http://dev.phrozen.org/githttp/mips-next into mips-for-linux-next

5 files changed, 162 insertions, 8 deletions

diff --git a/arch/mips/lantiq/xway/Makefile b/arch/mips/lantiq/xway/Makefile
index 70a58c747bd0..7a13660d630d 100644
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
@@ -1 +1,3 @@
 obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o
+
+obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 0f7228d350d5..6453962ac898 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -25,6 +25,7 @@
 #include <lantiq_soc.h>
 #include <xway_dma.h>
 
+#define LTQ_DMA_ID		0x08
 #define LTQ_DMA_CTRL		0x10
 #define LTQ_DMA_CPOLL		0x14
 #define LTQ_DMA_CS		0x18
@@ -214,6 +215,7 @@ ltq_dma_init(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *res;
+	unsigned id;
 	int i;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -243,7 +245,12 @@ ltq_dma_init(struct platform_device *pdev)
 		ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
 		ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
 	}
-	dev_info(&pdev->dev, "init done\n");
+
+	id = ltq_dma_r32(LTQ_DMA_ID);
+	dev_info(&pdev->dev,
+		"Init done - hw rev: %X, ports: %d, channels: %d\n",
+		id & 0x1f, (id >> 16) & 0xf, id >> 20);
+
 	return 0;
 }
 
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
index 22c55f73aa9d..544dbb7fb421 100644
--- a/arch/mips/lantiq/xway/reset.c
+++ b/arch/mips/lantiq/xway/reset.c
@@ -28,17 +28,24 @@
 #define RCU_RST_REQ		0x0010
 /* reset status register */
 #define RCU_RST_STAT		0x0014
+/* vr9 gphy registers */
+#define RCU_GFS_ADD0_XRX200	0x0020
+#define RCU_GFS_ADD1_XRX200	0x0068
 
 /* reboot bit */
+#define RCU_RD_GPHY0_XRX200	BIT(31)
 #define RCU_RD_SRST		BIT(30)
+#define RCU_RD_GPHY1_XRX200	BIT(29)
+
 /* reset cause */
 #define RCU_STAT_SHIFT		26
 /* boot selection */
-#define RCU_BOOT_SEL_SHIFT	26
-#define RCU_BOOT_SEL_MASK	0x7
+#define RCU_BOOT_SEL(x)		((x >> 18) & 0x7)
+#define RCU_BOOT_SEL_XRX200(x)	(((x >> 17) & 0xf) | ((x >> 8) & 0x10))
 
 /* remapped base addr of the reset control unit */
 static void __iomem *ltq_rcu_membase;
+static struct device_node *ltq_rcu_np;
 
 /* This function is used by the watchdog driver */
 int ltq_reset_cause(void)
@@ -52,7 +59,41 @@ EXPORT_SYMBOL_GPL(ltq_reset_cause);
 unsigned char ltq_boot_select(void)
 {
 	u32 val = ltq_rcu_r32(RCU_RST_STAT);
-	return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
+
+	if (of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200"))
+		return RCU_BOOT_SEL_XRX200(val);
+
+	return RCU_BOOT_SEL(val);
+}
+
+/* reset / boot a gphy */
+static struct ltq_xrx200_gphy_reset {
+	u32 rd;
+	u32 addr;
+} xrx200_gphy[] = {
+	{RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
+	{RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
+};
+
+/* reset and boot a gphy. these phys only exist on xrx200 SoC */
+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
+{
+	if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
+		dev_err(dev, "this SoC has no GPHY\n");
+		return -EINVAL;
+	}
+	if (id > 1) {
+		dev_err(dev, "%u is an invalid gphy id\n", id);
+		return -EINVAL;
+	}
+	dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
+
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
+			RCU_RST_REQ);
+	ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
+			RCU_RST_REQ);
+	return 0;
 }
 
 /* reset a io domain for u micro seconds */
@@ -85,14 +126,17 @@ static void ltq_machine_power_off(void)
 static int __init mips_reboot_setup(void)
 {
 	struct resource res;
-	struct device_node *np =
-		of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+
+	ltq_rcu_np = of_find_compatible_node(NULL, NULL, "lantiq,rcu-xway");
+	if (!ltq_rcu_np)
+		ltq_rcu_np = of_find_compatible_node(NULL, NULL,
+							"lantiq,rcu-xrx200");
 
 	/* check if all the reset register range is available */
-	if (!np)
+	if (!ltq_rcu_np)
 		panic("Failed to load reset resources from devicetree");
 
-	if (of_address_to_resource(np, 0, &res))
+	if (of_address_to_resource(ltq_rcu_np, 0, &res))
 		panic("Failed to get rcu memory range");
 
 	if (request_mem_region(res.start, resource_size(&res), res.name) < 0)
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 2917b56b6b25..3925e6609acc 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -370,6 +370,10 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1d900000.pcie", "pdi", 1, PMU1_PCIE_PDI);
 		clkdev_add_pmu("1d900000.pcie", "ctl", 1, PMU1_PCIE_CTL);
 		clkdev_add_pmu("1d900000.pcie", "ahb", 0, PMU_AHBM | PMU_AHBS);
+		clkdev_add_pmu("1e108000.eth", NULL, 0,
+				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+				PMU_PPE_QSB | PMU_PPE_TOP);
 	} else if (of_machine_is_compatible("lantiq,ar9")) {
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz());
diff --git a/arch/mips/lantiq/xway/xrx200_phy_fw.c b/arch/mips/lantiq/xway/xrx200_phy_fw.c
new file mode 100644
index 000000000000..fe808bf5366d
--- /dev/null
+++ b/arch/mips/lantiq/xway/xrx200_phy_fw.c
@@ -0,0 +1,97 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+#define XRX200_GPHY_FW_ALIGN	(16 * 1024)
+
+static dma_addr_t xway_gphy_load(struct platform_device *pdev)
+{
+	const struct firmware *fw;
+	dma_addr_t dev_addr = 0;
+	const char *fw_name;
+	void *fw_addr;
+	size_t size;
+
+	if (of_property_read_string(pdev->dev.of_node, "firmware", &fw_name)) {
+		dev_err(&pdev->dev, "failed to load firmware filename\n");
+		return 0;
+	}
+
+	dev_info(&pdev->dev, "requesting %s\n", fw_name);
+	if (request_firmware(&fw, fw_name, &pdev->dev)) {
+		dev_err(&pdev->dev, "failed to load firmware: %s\n", fw_name);
+		return 0;
+	}
+
+	/*
+	 * GPHY cores need the firmware code in a persistent and contiguous
+	 * memory area with a 16 kB boundary aligned start address
+	 */
+	size = fw->size + XRX200_GPHY_FW_ALIGN;
+
+	fw_addr = dma_alloc_coherent(&pdev->dev, size, &dev_addr, GFP_KERNEL);
+	if (fw_addr) {
+		fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
+		dev_addr = ALIGN(dev_addr, XRX200_GPHY_FW_ALIGN);
+		memcpy(fw_addr, fw->data, fw->size);
+	} else {
+		dev_err(&pdev->dev, "failed to alloc firmware memory\n");
+	}
+
+	release_firmware(fw);
+	return dev_addr;
+}
+
+static int __devinit xway_phy_fw_probe(struct platform_device *pdev)
+{
+	dma_addr_t fw_addr;
+	struct property *pp;
+	unsigned char *phyids;
+	int i, ret = 0;
+
+	fw_addr = xway_gphy_load(pdev);
+	if (!fw_addr)
+		return -EINVAL;
+	pp = of_find_property(pdev->dev.of_node, "phys", NULL);
+	if (!pp)
+		return -ENOENT;
+	phyids = pp->value;
+	for (i = 0; i < pp->length && !ret; i++)
+		ret = xrx200_gphy_boot(&pdev->dev, phyids[i], fw_addr);
+	if (!ret)
+		mdelay(100);
+	return ret;
+}
+
+static const struct of_device_id xway_phy_match[] = {
+	{ .compatible = "lantiq,phy-xrx200" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xway_phy_match);
+
+static struct platform_driver xway_phy_driver = {
+	.probe = xway_phy_fw_probe,
+	.driver = {
+		.name = "phy-xrx200",
+		.owner = THIS_MODULE,
+		.of_match_table = xway_phy_match,
+	},
+};
+
+module_platform_driver(xway_phy_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq XRX200 PHY Firmware Loader");
+MODULE_LICENSE("GPL");