diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-31 11:28:31 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-31 11:28:31 -0800 |
commit | c5951e7c8ee5cb04b8b41c32bf567b90117a2124 (patch) | |
tree | fae1fde52d66ba050759d85272c62ddc57916061 /arch/mips/kernel | |
parent | b7e573bb4a7a511741f8942b1fb03cfe602ee57f (diff) | |
parent | 2c4288719806ca0b3de1b742ada26b25a60d6a45 (diff) | |
download | linux-c5951e7c8ee5cb04b8b41c32bf567b90117a2124.tar.bz2 |
Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS changes from Paul Burton:
"Nothing too big or scary in here:
- Support mremap() for the VDSO, primarily to allow CRIU to restore
the VDSO to its checkpointed location.
- Restore the MIPS32 cBPF JIT, after having reverted the enablement
of the eBPF JIT for MIPS32 systems in the 5.5 cycle.
- Improve cop0 counter synchronization behaviour whilst onlining CPUs
by running with interrupts disabled.
- Better match FPU behaviour when emulating multiply-accumulate
instructions on pre-r6 systems that implement IEEE754-2008 style
MACs.
- Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
to take advantage of instructions introduced by r2.
- Support for the Ingenic X1000 SoC & the really nice little CU Neo
development board that's using it.
- Support for WMAC on GARDENA Smart Gateway devices.
- Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
preparation for introducing IP35 (Origin 3*) support.
- Various Kconfig & Makefile cleanups"
* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
MIPS: Loongson64: Disable exec hazard
MIPS: Loongson64: Bump ISA level to MIPSR2
MIPS: Make DIEI support as a config option
MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
MIPS: asm: local: add barriers for Loongson
MIPS: Loongson64: Select mac2008 only feature
MIPS: Add MAC2008 Support
Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
MIPS: generic: don't unconditionally select PINCTRL
MIPS: don't explicitly select LIBFDT in Kconfig
MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
MIPS: SGI-IP30: Check for valid pointer before using it
MIPS: syscalls: fix indentation of the 'SYSNR' message
MIPS: boot: fix typo in 'vmlinux.lzma.its' target
MIPS: fix indentation of the 'RELOCS' message
dt-bindings: Document loongson vendor-prefix
MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
...
Diffstat (limited to 'arch/mips/kernel')
-rw-r--r-- | arch/mips/kernel/cpu-probe.c | 81 | ||||
-rw-r--r-- | arch/mips/kernel/setup.c | 6 | ||||
-rw-r--r-- | arch/mips/kernel/sync-r4k.c | 5 | ||||
-rw-r--r-- | arch/mips/kernel/syscalls/Makefile | 2 | ||||
-rw-r--r-- | arch/mips/kernel/unaligned.c | 36 |
5 files changed, 77 insertions, 53 deletions
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index c54332697673..6ab6b03d35ba 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -102,7 +102,12 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c) if (fir & MIPS_FPIR_HAS2008) { fcsr = read_32bit_cp1_register(CP1_STATUS); - fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008); + /* + * MAC2008 toolchain never landed in real world, so we're only + * testing wether it can be disabled and don't try to enabled + * it. + */ + fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | FPU_CSR_MAC2008); write_32bit_cp1_register(CP1_STATUS, fcsr0); fcsr0 = read_32bit_cp1_register(CP1_STATUS); @@ -112,6 +117,15 @@ static void cpu_set_fpu_2008(struct cpuinfo_mips *c) write_32bit_cp1_register(CP1_STATUS, fcsr); + if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2)) { + /* + * The bit for MAC2008 might be reused by R6 in future, + * so we only test for R2-R5. + */ + if (fcsr0 & FPU_CSR_MAC2008) + c->options |= MIPS_CPU_MAC_2008_ONLY; + } + if (!(fcsr0 & FPU_CSR_NAN2008)) c->options |= MIPS_CPU_NAN_LEGACY; if (fcsr1 & FPU_CSR_NAN2008) @@ -1960,10 +1974,8 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter); switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_XBURST: - c->cputype = CPU_XBURST; - c->writecombine = _CACHE_UNCACHED_ACCELERATED; - __cpu_name[cpu] = "Ingenic JZRISC"; + case PRID_IMP_XBURST_REV1: + /* * The XBurst core by default attempts to avoid branch target * buffer lookups by detecting & special casing loops. This @@ -1971,34 +1983,43 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu) * Set cp0 config7 bit 4 to disable this feature. */ set_c0_config7(MIPS_CONF7_BTB_LOOP_EN); - break; - default: - panic("Unknown Ingenic Processor ID!"); - break; - } - switch (c->processor_id & PRID_COMP_MASK) { - /* - * The config0 register in the XBurst CPUs with a processor ID of - * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this - * mode is not compatible with the MIPS standard, it will cause - * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) - * when starting the init process. After chip reset, the default - * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to - * switch back to VTLB mode to prevent getting stuck. - */ - case PRID_COMP_INGENIC_D1: - write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); - break; - /* - * The config0 register in the XBurst CPUs with a processor ID of - * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, - * but they don't actually support this ISA. - */ - case PRID_COMP_INGENIC_D0: - c->isa_level &= ~MIPS_CPU_ISA_M32R2; + switch (c->processor_id & PRID_COMP_MASK) { + + /* + * The config0 register in the XBurst CPUs with a processor ID of + * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible, + * but they don't actually support this ISA. + */ + case PRID_COMP_INGENIC_D0: + c->isa_level &= ~MIPS_CPU_ISA_M32R2; + break; + + /* + * The config0 register in the XBurst CPUs with a processor ID of + * PRID_COMP_INGENIC_D1 has an abandoned huge page tlb mode, this + * mode is not compatible with the MIPS standard, it will cause + * tlbmiss and into an infinite loop (line 21 in the tlb-funcs.S) + * when starting the init process. After chip reset, the default + * is HPTLB mode, Write 0xa9000000 to cp0 register 5 sel 4 to + * switch back to VTLB mode to prevent getting stuck. + */ + case PRID_COMP_INGENIC_D1: + write_c0_page_ctrl(XBURST_PAGECTRL_HPTLB_DIS); + break; + + default: + break; + } + /* fall-through */ + case PRID_IMP_XBURST_REV2: + c->cputype = CPU_XBURST; + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + __cpu_name[cpu] = "Ingenic XBurst"; break; + default: + panic("Unknown Ingenic Processor ID!"); break; } } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index a28057946ed1..1ac2752fb791 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -515,8 +515,7 @@ static void __init request_crashkernel(struct resource *res) ret = request_resource(res, &crashk_res); if (!ret) pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", - (unsigned long)((crashk_res.end - - crashk_res.start + 1) >> 20), + (unsigned long)(resource_size(&crashk_res) >> 20), (unsigned long)(crashk_res.start >> 20)); } #else /* !defined(CONFIG_KEXEC) */ @@ -698,8 +697,7 @@ static void __init arch_mem_init(char **cmdline_p) mips_parse_crashkernel(); #ifdef CONFIG_KEXEC if (crashk_res.start != crashk_res.end) - memblock_reserve(crashk_res.start, - crashk_res.end - crashk_res.start + 1); + memblock_reserve(crashk_res.start, resource_size(&crashk_res)); #endif device_tree_init(); sparse_init(); diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index f2973ce87f53..abdd7aaa3311 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -90,6 +90,9 @@ void synchronise_count_master(int cpu) void synchronise_count_slave(int cpu) { int i; + unsigned long flags; + + local_irq_save(flags); /* * Not every cpu is online at the time this gets called, @@ -113,5 +116,7 @@ void synchronise_count_slave(int cpu) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + + local_irq_restore(flags); } #undef NR_LOOPS diff --git a/arch/mips/kernel/syscalls/Makefile b/arch/mips/kernel/syscalls/Makefile index a3d4bec695c6..6efb2f6889a7 100644 --- a/arch/mips/kernel/syscalls/Makefile +++ b/arch/mips/kernel/syscalls/Makefile @@ -18,7 +18,7 @@ quiet_cmd_syshdr = SYSHDR $@ '$(syshdr_pfx_$(basetarget))' \ '$(syshdr_offset_$(basetarget))' -quiet_cmd_sysnr = SYSNR $@ +quiet_cmd_sysnr = SYSNR $@ cmd_sysnr = $(CONFIG_SHELL) '$(sysnr)' '$<' '$@' \ '$(sysnr_abis_$(basetarget))' \ '$(sysnr_pfx_$(basetarget))' \ diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 92bd2b0f0548..ca6fc4762d97 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -131,7 +131,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _LoadW(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -152,7 +152,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ /* For CPUs without lwl instruction */ #define _LoadW(addr, value, res, type) \ do { \ @@ -187,7 +187,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #define _LoadHWU(addr, value, res, type) \ do { \ @@ -213,7 +213,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _LoadWU(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -256,7 +256,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ /* For CPUs without lwl and ldl instructions */ #define _LoadWU(addr, value, res, type) \ do { \ @@ -340,7 +340,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #define _StoreHW(addr, value, res, type) \ @@ -366,7 +366,7 @@ do { \ : "r" (value), "r" (addr), "i" (-EFAULT));\ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _StoreW(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -407,7 +407,7 @@ do { \ : "r" (value), "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ #define _StoreW(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -483,7 +483,7 @@ do { \ : "memory"); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #else /* __BIG_ENDIAN */ @@ -509,7 +509,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _LoadW(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -530,7 +530,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ /* For CPUs without lwl instruction */ #define _LoadW(addr, value, res, type) \ do { \ @@ -565,7 +565,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #define _LoadHWU(addr, value, res, type) \ @@ -592,7 +592,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _LoadWU(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -635,7 +635,7 @@ do { \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ /* For CPUs without lwl and ldl instructions */ #define _LoadWU(addr, value, res, type) \ do { \ @@ -718,7 +718,7 @@ do { \ : "=&r" (value), "=r" (res) \ : "r" (addr), "i" (-EFAULT)); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #define _StoreHW(addr, value, res, type) \ do { \ @@ -743,7 +743,7 @@ do { \ : "r" (value), "r" (addr), "i" (-EFAULT));\ } while(0) -#ifdef CONFIG_CPU_HAS_LOAD_STORE_LR +#ifndef CONFIG_CPU_NO_LOAD_STORE_LR #define _StoreW(addr, value, res, type) \ do { \ __asm__ __volatile__ ( \ @@ -784,7 +784,7 @@ do { \ : "r" (value), "r" (addr), "i" (-EFAULT)); \ } while(0) -#else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#else /* CONFIG_CPU_NO_LOAD_STORE_LR */ /* For CPUs without swl and sdl instructions */ #define _StoreW(addr, value, res, type) \ do { \ @@ -861,7 +861,7 @@ do { \ : "memory"); \ } while(0) -#endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */ +#endif /* CONFIG_CPU_NO_LOAD_STORE_LR */ #endif #define LoadHWU(addr, value, res) _LoadHWU(addr, value, res, kernel) |