MIPS: JZ4740: use Ingenic SoC UART driver

Remove the serial support from arch/mips/jz4740 & make use of the new
Ingenic SoC UART driver. This is done for both regular & early console
output.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Alexandre Courbot <gnurou@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/10160/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

6 files changed, 1 insertions, 117 deletions

diff --git a/arch/mips/jz4740/Makefile b/arch/mips/jz4740/Makefile
index 70a9578cc6db..89ce40143854 100644
--- a/arch/mips/jz4740/Makefile
+++ b/arch/mips/jz4740/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y += prom.o time.o reset.o setup.o \
-	gpio.o platform.o timer.o serial.o
+	gpio.o platform.o timer.o
 
 CFLAGS_setup.o = -I$(src)/../../../scripts/dtc/libfdt
 
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 21b034cea864..4e62bf85d0b0 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -482,8 +482,6 @@ static int __init qi_lb60_init_platform_devices(void)
 	gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
 	gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
 
-	jz4740_serial_device_register();
-
 	spi_register_board_info(qi_lb60_spi_board_info,
 				ARRAY_SIZE(qi_lb60_spi_board_info));
 
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 2a5c7c7d0735..e8a463b9b663 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -30,7 +30,6 @@
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 
-#include "serial.h"
 #include "clock.h"
 
 /* OHCI controller */
@@ -280,50 +279,6 @@ struct platform_device jz4740_adc_device = {
 	.resource	= jz4740_adc_resources,
 };
 
-/* Serial */
-#define JZ4740_UART_DATA(_id) \
-	{ \
-		.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE, \
-		.iotype = UPIO_MEM, \
-		.regshift = 2, \
-		.serial_out = jz4740_serial_out, \
-		.type = PORT_16550, \
-		.mapbase = JZ4740_UART ## _id ## _BASE_ADDR, \
-		.irq = JZ4740_IRQ_UART ## _id, \
-	}
-
-static struct plat_serial8250_port jz4740_uart_data[] = {
-	JZ4740_UART_DATA(0),
-	JZ4740_UART_DATA(1),
-	{},
-};
-
-static struct platform_device jz4740_uart_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = jz4740_uart_data,
-	},
-};
-
-void jz4740_serial_device_register(void)
-{
-	struct plat_serial8250_port *p;
-	struct clk *ext_clk;
-	unsigned long ext_rate;
-
-	ext_clk = clk_get(NULL, "ext");
-	if (IS_ERR(ext_clk))
-		panic("unable to get ext clock");
-	ext_rate = clk_get_rate(ext_clk);
-	clk_put(ext_clk);
-
-	for (p = jz4740_uart_data; p->flags != 0; ++p)
-		p->uartclk = ext_rate;
-
-	platform_device_register(&jz4740_uart_device);
-}
-
 /* Watchdog */
 static struct resource jz4740_wdt_resources[] = {
 	{
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index 5a93f381590d..6984683c90d0 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -53,16 +53,3 @@ void __init prom_init(void)
 void __init prom_free_prom_memory(void)
 {
 }
-
-#define UART_REG(_reg) ((void __iomem *)CKSEG1ADDR(JZ4740_UART0_BASE_ADDR + (_reg << 2)))
-
-void prom_putchar(char c)
-{
-	uint8_t lsr;
-
-	do {
-		lsr = readb(UART_REG(UART_LSR));
-	} while ((lsr & UART_LSR_TEMT) == 0);
-
-	writeb(c, UART_REG(UART_TX));
-}
diff --git a/arch/mips/jz4740/serial.c b/arch/mips/jz4740/serial.c
deleted file mode 100644
index d23de45826d1..000000000000
--- a/arch/mips/jz4740/serial.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 serial support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-void jz4740_serial_out(struct uart_port *p, int offset, int value)
-{
-	switch (offset) {
-	case UART_FCR:
-		value |= 0x10; /* Enable uart module */
-		break;
-	case UART_IER:
-		value |= (value & 0x4) << 2;
-		break;
-	default:
-		break;
-	}
-	writeb(value, p->membase + (offset << p->regshift));
-}
diff --git a/arch/mips/jz4740/serial.h b/arch/mips/jz4740/serial.h
deleted file mode 100644
index 8eb715bb1ea8..000000000000
--- a/arch/mips/jz4740/serial.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *  Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
- *  JZ4740 serial support
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef __MIPS_JZ4740_SERIAL_H__
-#define __MIPS_JZ4740_SERIAL_H__
-
-struct uart_port;
-
-void jz4740_serial_out(struct uart_port *p, int offset, int value);
-
-#endif