summaryrefslogtreecommitdiffstats
path: root/arch/mips/jz4740
diff options
context:
space:
mode:
authorMaarten ter Huurne <maarten@treewalker.org>2012-03-30 16:18:57 +0200
committerRalf Baechle <ralf@linux-mips.org>2012-07-23 13:56:20 +0100
commitea3952e01c47ac76d71857099cbfc2f487f507d2 (patch)
treeeae5cd5d5ae1a92cc74fc121b1e43e557b5c7228 /arch/mips/jz4740
parent56635d79932c805f6eb2a775ad1cdf9ace12c2b5 (diff)
downloadlinux-ea3952e01c47ac76d71857099cbfc2f487f507d2.tar.bz2
MIPS: JZ4740: reset: Initialize hibernate wakeup counters.
In hibernation mode only the wakeup logic and the RTC are left running, so this is what users perceive as power down. If the counters are not initialized, the corresponding pin (typically connected to the power button) has to be asserted for two seconds before the device wakes up. Most users expect a shorter wakeup time. I took the timing values of 100 ms and 60 ms from BouKiCHi's patch for the Dingoo A320 kernel. Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/jz4740')
-rw-r--r--arch/mips/jz4740/reset.c49
1 files changed, 44 insertions, 5 deletions
diff --git a/arch/mips/jz4740/reset.c b/arch/mips/jz4740/reset.c
index 5f1fb95c0d0d..6c0da5afcf17 100644
--- a/arch/mips/jz4740/reset.c
+++ b/arch/mips/jz4740/reset.c
@@ -21,6 +21,9 @@
#include <asm/mach-jz4740/base.h>
#include <asm/mach-jz4740/timer.h>
+#include "reset.h"
+#include "clock.h"
+
static void jz4740_halt(void)
{
while (1) {
@@ -53,21 +56,57 @@ static void jz4740_restart(char *command)
jz4740_halt();
}
-#define JZ_REG_RTC_CTRL 0x00
-#define JZ_REG_RTC_HIBERNATE 0x20
+#define JZ_REG_RTC_CTRL 0x00
+#define JZ_REG_RTC_HIBERNATE 0x20
+#define JZ_REG_RTC_WAKEUP_FILTER 0x24
+#define JZ_REG_RTC_RESET_COUNTER 0x28
-#define JZ_RTC_CTRL_WRDY BIT(7)
+#define JZ_RTC_CTRL_WRDY BIT(7)
+#define JZ_RTC_WAKEUP_FILTER_MASK 0x0000FFE0
+#define JZ_RTC_RESET_COUNTER_MASK 0x00000FE0
-static void jz4740_power_off(void)
+static inline void jz4740_rtc_wait_ready(void __iomem *rtc_base)
{
- void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x24);
uint32_t ctrl;
do {
ctrl = readl(rtc_base + JZ_REG_RTC_CTRL);
} while (!(ctrl & JZ_RTC_CTRL_WRDY));
+}
+static void jz4740_power_off(void)
+{
+ void __iomem *rtc_base = ioremap(JZ4740_RTC_BASE_ADDR, 0x38);
+ unsigned long wakeup_filter_ticks;
+ unsigned long reset_counter_ticks;
+
+ /*
+ * Set minimum wakeup pin assertion time: 100 ms.
+ * Range is 0 to 2 sec if RTC is clocked at 32 kHz.
+ */
+ wakeup_filter_ticks = (100 * jz4740_clock_bdata.rtc_rate) / 1000;
+ if (wakeup_filter_ticks < JZ_RTC_WAKEUP_FILTER_MASK)
+ wakeup_filter_ticks &= JZ_RTC_WAKEUP_FILTER_MASK;
+ else
+ wakeup_filter_ticks = JZ_RTC_WAKEUP_FILTER_MASK;
+ jz4740_rtc_wait_ready(rtc_base);
+ writel(wakeup_filter_ticks, rtc_base + JZ_REG_RTC_WAKEUP_FILTER);
+
+ /*
+ * Set reset pin low-level assertion time after wakeup: 60 ms.
+ * Range is 0 to 125 ms if RTC is clocked at 32 kHz.
+ */
+ reset_counter_ticks = (60 * jz4740_clock_bdata.rtc_rate) / 1000;
+ if (reset_counter_ticks < JZ_RTC_RESET_COUNTER_MASK)
+ reset_counter_ticks &= JZ_RTC_RESET_COUNTER_MASK;
+ else
+ reset_counter_ticks = JZ_RTC_RESET_COUNTER_MASK;
+ jz4740_rtc_wait_ready(rtc_base);
+ writel(reset_counter_ticks, rtc_base + JZ_REG_RTC_RESET_COUNTER);
+
+ jz4740_rtc_wait_ready(rtc_base);
writel(1, rtc_base + JZ_REG_RTC_HIBERNATE);
+
jz4740_halt();
}