summaryrefslogtreecommitdiffstats
path: root/arch/mips/generic
diff options
context:
space:
mode:
authorPaul Burton <paul.burton@imgtec.com>2017-06-02 12:29:51 -0700
committerRalf Baechle <ralf@linux-mips.org>2017-06-28 12:22:40 +0200
commit571b7e69f7f775c531ffaf73ae476b1e46150f41 (patch)
treebdce1bec0e658dd73d170116f1ee5216fd7e136b /arch/mips/generic
parentefe4a1acdc2c70da9025cf405112667e5580a572 (diff)
downloadlinux-571b7e69f7f775c531ffaf73ae476b1e46150f41.tar.bz2
MIPS: generic/yamon-dt: Pull YAMON DT shim code out of SEAD-3 board
In preparation for supporting other YAMON-using boards (Malta) & sharing code to translate information from YAMON into device tree properties, pull the code doing so for the kernel command line, system memory & serial configuration out of the SEAD-3 board code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16181/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/generic')
-rw-r--r--arch/mips/generic/Kconfig8
-rw-r--r--arch/mips/generic/Makefile1
-rw-r--r--arch/mips/generic/board-sead3.c178
-rw-r--r--arch/mips/generic/yamon-dt.c190
4 files changed, 203 insertions, 174 deletions
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index a606b3f9196c..446b7c68133d 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -9,9 +9,17 @@ config LEGACY_BOARDS
kernel is booted without being provided with an FDT via the UHI
boot protocol.
+config YAMON_DT_SHIM
+ bool
+ help
+ Select this from your board if the board uses the YAMON bootloader
+ and you wish to include code which helps translate various
+ YAMON-provided environment variables into a device tree properties.
+
config LEGACY_BOARD_SEAD3
bool "Support MIPS SEAD-3 boards"
select LEGACY_BOARDS
+ select YAMON_DT_SHIM
help
Enable this to include support for booting on MIPS SEAD-3 FPGA-based
development boards, which boot using a legacy boot protocol.
diff --git a/arch/mips/generic/Makefile b/arch/mips/generic/Makefile
index acb9b6d62b16..56b3ea565ed9 100644
--- a/arch/mips/generic/Makefile
+++ b/arch/mips/generic/Makefile
@@ -12,5 +12,6 @@ obj-y += init.o
obj-y += irq.o
obj-y += proc.o
+obj-$(CONFIG_YAMON_DT_SHIM) += yamon-dt.o
obj-$(CONFIG_LEGACY_BOARD_SEAD3) += board-sead3.o
obj-$(CONFIG_KEXEC) += kexec.o
diff --git a/arch/mips/generic/board-sead3.c b/arch/mips/generic/board-sead3.c
index f4ae0584a33b..63fdc98738ba 100644
--- a/arch/mips/generic/board-sead3.c
+++ b/arch/mips/generic/board-sead3.c
@@ -17,6 +17,7 @@
#include <asm/fw/fw.h>
#include <asm/io.h>
#include <asm/machine.h>
+#include <asm/yamon-dt.h>
#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
#define SEAD_CONFIG_GIC_PRESENT BIT(1)
@@ -33,98 +34,6 @@ static __init bool sead3_detect(void)
return (rev & MIPS_REVISION_MACHINE) == MIPS_REVISION_MACHINE_SEAD3;
}
-static __init int append_cmdline(void *fdt)
-{
- int err, chosen_off;
-
- /* find or add chosen node */
- chosen_off = fdt_path_offset(fdt, "/chosen");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_path_offset(fdt, "/chosen@0");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_add_subnode(fdt, 0, "chosen");
- if (chosen_off < 0) {
- pr_err("Unable to find or add DT chosen node: %d\n",
- chosen_off);
- return chosen_off;
- }
-
- err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
- if (err) {
- pr_err("Unable to set bootargs property: %d\n", err);
- return err;
- }
-
- return 0;
-}
-
-static __init int append_memory(void *fdt)
-{
- unsigned long phys_memsize, memsize;
- __be32 mem_array[2];
- int err, mem_off;
- char *var;
-
- /* find memory size from the bootloader environment */
- var = fw_getenv("memsize");
- if (var) {
- err = kstrtoul(var, 0, &phys_memsize);
- if (err) {
- pr_err("Failed to read memsize env variable '%s'\n",
- var);
- return -EINVAL;
- }
- } else {
- pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
- phys_memsize = 32 << 20;
- }
-
- /* default to using all available RAM */
- memsize = phys_memsize;
-
- /* allow the user to override the usable memory */
- var = strstr(arcs_cmdline, "memsize=");
- if (var)
- memsize = memparse(var + strlen("memsize="), NULL);
-
- /* if the user says there's more RAM than we thought, believe them */
- phys_memsize = max_t(unsigned long, phys_memsize, memsize);
-
- /* find or add a memory node */
- mem_off = fdt_path_offset(fdt, "/memory");
- if (mem_off == -FDT_ERR_NOTFOUND)
- mem_off = fdt_add_subnode(fdt, 0, "memory");
- if (mem_off < 0) {
- pr_err("Unable to find or add memory DT node: %d\n", mem_off);
- return mem_off;
- }
-
- err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
- if (err) {
- pr_err("Unable to set memory node device_type: %d\n", err);
- return err;
- }
-
- mem_array[0] = 0;
- mem_array[1] = cpu_to_be32(phys_memsize);
- err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
- if (err) {
- pr_err("Unable to set memory regs property: %d\n", err);
- return err;
- }
-
- mem_array[0] = 0;
- mem_array[1] = cpu_to_be32(memsize);
- err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
- mem_array, sizeof(mem_array));
- if (err) {
- pr_err("Unable to set linux,usable-memory property: %d\n", err);
- return err;
- }
-
- return 0;
-}
-
static __init int remove_gic(void *fdt)
{
const unsigned int cpu_ehci_int = 2;
@@ -214,85 +123,6 @@ static __init int remove_gic(void *fdt)
return 0;
}
-static __init int serial_config(void *fdt)
-{
- const char *yamontty, *mode_var;
- char mode_var_name[9], path[18], parity;
- unsigned int uart, baud, stop_bits;
- bool hw_flow;
- int chosen_off, err;
-
- yamontty = fw_getenv("yamontty");
- if (!yamontty || !strcmp(yamontty, "tty0")) {
- uart = 0;
- } else if (!strcmp(yamontty, "tty1")) {
- uart = 1;
- } else {
- pr_warn("yamontty environment variable '%s' invalid\n",
- yamontty);
- uart = 0;
- }
-
- baud = stop_bits = 0;
- parity = 0;
- hw_flow = false;
-
- snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
- mode_var = fw_getenv(mode_var_name);
- if (mode_var) {
- while (mode_var[0] >= '0' && mode_var[0] <= '9') {
- baud *= 10;
- baud += mode_var[0] - '0';
- mode_var++;
- }
- if (mode_var[0] == ',')
- mode_var++;
- if (mode_var[0])
- parity = mode_var[0];
- if (mode_var[0] == ',')
- mode_var++;
- if (mode_var[0])
- stop_bits = mode_var[0] - '0';
- if (mode_var[0] == ',')
- mode_var++;
- if (!strcmp(mode_var, "hw"))
- hw_flow = true;
- }
-
- if (!baud)
- baud = 38400;
-
- if (parity != 'e' && parity != 'n' && parity != 'o')
- parity = 'n';
-
- if (stop_bits != 7 && stop_bits != 8)
- stop_bits = 8;
-
- WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
- uart, baud, parity, stop_bits,
- hw_flow ? "r" : "") >= sizeof(path));
-
- /* find or add chosen node */
- chosen_off = fdt_path_offset(fdt, "/chosen");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_path_offset(fdt, "/chosen@0");
- if (chosen_off == -FDT_ERR_NOTFOUND)
- chosen_off = fdt_add_subnode(fdt, 0, "chosen");
- if (chosen_off < 0) {
- pr_err("Unable to find or add DT chosen node: %d\n",
- chosen_off);
- return chosen_off;
- }
-
- err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
- if (err) {
- pr_err("Unable to set stdout-path property: %d\n", err);
- return err;
- }
-
- return 0;
-}
-
static __init const void *sead3_fixup_fdt(const void *fdt,
const void *match_data)
{
@@ -311,11 +141,11 @@ static __init const void *sead3_fixup_fdt(const void *fdt,
if (err)
panic("Unable to open FDT: %d", err);
- err = append_cmdline(fdt_buf);
+ err = yamon_dt_append_cmdline(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
- err = append_memory(fdt_buf);
+ err = yamon_dt_append_memory(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
@@ -323,7 +153,7 @@ static __init const void *sead3_fixup_fdt(const void *fdt,
if (err)
panic("Unable to patch FDT: %d", err);
- err = serial_config(fdt_buf);
+ err = yamon_dt_serial_config(fdt_buf);
if (err)
panic("Unable to patch FDT: %d", err);
diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c
new file mode 100644
index 000000000000..9a0c8da5a796
--- /dev/null
+++ b/arch/mips/generic/yamon-dt.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "yamon-dt: " fmt
+
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/fw/fw.h>
+
+__init int yamon_dt_append_cmdline(void *fdt)
+{
+ int err, chosen_off;
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "bootargs", fw_getcmdline());
+ if (err) {
+ pr_err("Unable to set bootargs property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+__init int yamon_dt_append_memory(void *fdt)
+{
+ unsigned long phys_memsize, memsize;
+ __be32 mem_array[2];
+ int err, mem_off;
+ char *var;
+
+ /* find memory size from the bootloader environment */
+ var = fw_getenv("memsize");
+ if (var) {
+ err = kstrtoul(var, 0, &phys_memsize);
+ if (err) {
+ pr_err("Failed to read memsize env variable '%s'\n",
+ var);
+ return -EINVAL;
+ }
+ } else {
+ pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");
+ phys_memsize = 32 << 20;
+ }
+
+ /* default to using all available RAM */
+ memsize = phys_memsize;
+
+ /* allow the user to override the usable memory */
+ var = strstr(arcs_cmdline, "memsize=");
+ if (var)
+ memsize = memparse(var + strlen("memsize="), NULL);
+
+ /* if the user says there's more RAM than we thought, believe them */
+ phys_memsize = max_t(unsigned long, phys_memsize, memsize);
+
+ /* find or add a memory node */
+ mem_off = fdt_path_offset(fdt, "/memory");
+ if (mem_off == -FDT_ERR_NOTFOUND)
+ mem_off = fdt_add_subnode(fdt, 0, "memory");
+ if (mem_off < 0) {
+ pr_err("Unable to find or add memory DT node: %d\n", mem_off);
+ return mem_off;
+ }
+
+ err = fdt_setprop_string(fdt, mem_off, "device_type", "memory");
+ if (err) {
+ pr_err("Unable to set memory node device_type: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(phys_memsize);
+ err = fdt_setprop(fdt, mem_off, "reg", mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set memory regs property: %d\n", err);
+ return err;
+ }
+
+ mem_array[0] = 0;
+ mem_array[1] = cpu_to_be32(memsize);
+ err = fdt_setprop(fdt, mem_off, "linux,usable-memory",
+ mem_array, sizeof(mem_array));
+ if (err) {
+ pr_err("Unable to set linux,usable-memory property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+__init int yamon_dt_serial_config(void *fdt)
+{
+ const char *yamontty, *mode_var;
+ char mode_var_name[9], path[18], parity;
+ unsigned int uart, baud, stop_bits;
+ bool hw_flow;
+ int chosen_off, err;
+
+ yamontty = fw_getenv("yamontty");
+ if (!yamontty || !strcmp(yamontty, "tty0")) {
+ uart = 0;
+ } else if (!strcmp(yamontty, "tty1")) {
+ uart = 1;
+ } else {
+ pr_warn("yamontty environment variable '%s' invalid\n",
+ yamontty);
+ uart = 0;
+ }
+
+ baud = stop_bits = 0;
+ parity = 0;
+ hw_flow = false;
+
+ snprintf(mode_var_name, sizeof(mode_var_name), "modetty%u", uart);
+ mode_var = fw_getenv(mode_var_name);
+ if (mode_var) {
+ while (mode_var[0] >= '0' && mode_var[0] <= '9') {
+ baud *= 10;
+ baud += mode_var[0] - '0';
+ mode_var++;
+ }
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ parity = mode_var[0];
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (mode_var[0])
+ stop_bits = mode_var[0] - '0';
+ if (mode_var[0] == ',')
+ mode_var++;
+ if (!strcmp(mode_var, "hw"))
+ hw_flow = true;
+ }
+
+ if (!baud)
+ baud = 38400;
+
+ if (parity != 'e' && parity != 'n' && parity != 'o')
+ parity = 'n';
+
+ if (stop_bits != 7 && stop_bits != 8)
+ stop_bits = 8;
+
+ WARN_ON(snprintf(path, sizeof(path), "uart%u:%u%c%u%s",
+ uart, baud, parity, stop_bits,
+ hw_flow ? "r" : "") >= sizeof(path));
+
+ /* find or add chosen node */
+ chosen_off = fdt_path_offset(fdt, "/chosen");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_path_offset(fdt, "/chosen@0");
+ if (chosen_off == -FDT_ERR_NOTFOUND)
+ chosen_off = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen_off < 0) {
+ pr_err("Unable to find or add DT chosen node: %d\n",
+ chosen_off);
+ return chosen_off;
+ }
+
+ err = fdt_setprop_string(fdt, chosen_off, "stdout-path", path);
+ if (err) {
+ pr_err("Unable to set stdout-path property: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}