[MIPS] Pb1200/DBAu1200: move platform code to its proper place

Since both the IDE interface and SMC 91C111 Ethernet chip are on-board
devices, not SOC devices, move the platform device registration form the
common to the board specific code.

While at it, remove semicolon (which didn't break compilation only by
chance) from the AU1XXX_ATA_DDMA_REQ macro and do some renaming:

- change 'au1200_ide0_' variable name prefix to the mere 'ide_';

- change 'smc91x_' variable name prefix to 'smc91c111_' since that's the
  name of the chip used on the boards;

- drop 'AU1XXX_' prefix from the names of macros describing IDE and Ethernet
  on-board devices;

- change 'SMC91111_' to 'SMC91C111_', change 'IRQ' to 'INT' in the names of
  the macros describing the Ethernet chip for consistency with the IDE
  macros;

- change 'ATA_' to 'IDE_' and 'OFFSET' to 'SHIFT' (since this value is
  indeed a shift count) in the names of the macros describing the IDE
  interface.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

1 files changed, 0 insertions, 54 deletions

diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 83ad422e8aca..31d2a2270878 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -233,19 +233,6 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static struct resource au1200_ide0_resources[] = {
-	[0] = {
-		.start		= AU1XXX_ATA_PHYS_ADDR,
-		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1XXX_ATA_INT,
-		.end		= AU1XXX_ATA_INT,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
 static u64 au1200_lcd_dmamask = ~(u32)0;
 
 static struct platform_device au1200_lcd_device = {
@@ -259,20 +246,6 @@ static struct platform_device au1200_lcd_device = {
 	.resource       = au1200_lcd_resources,
 };
 
-
-static u64 ide0_dmamask = ~(u32)0;
-
-static struct platform_device au1200_ide0_device = {
-	.name		= "au1200-ide",
-	.id		= 0,
-	.dev = {
-		.dma_mask 		= &ide0_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
-	.resource	= au1200_ide0_resources,
-};
-
 static u64 au1xxx_mmc_dmamask =  ~(u32)0;
 
 static struct platform_device au1xxx_mmc_device = {
@@ -292,29 +265,6 @@ static struct platform_device au1x00_pcmcia_device = {
 	.id 		= 0,
 };
 
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= AU1XXX_SMC91111_PHYS_ADDR,
-		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1XXX_SMC91111_IRQ,
-		.end	= AU1XXX_SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-#endif /* defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) */
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -345,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
-	&au1200_ide0_device,
 	&au1xxx_mmc_device,
 #endif
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
-	&smc91x_device,
-#endif
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif