Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is an unusually large pull request for MIPS - in parts because
  lots of patches missed the 3.18 deadline but primarily because some
  folks opened the flood gates.

   - Retire the MIPS-specific phys_t with the generic phys_addr_t.
   - Improvments for the backtrace code used by oprofile.
   - Better backtraces on SMP systems.
   - Cleanups for the Octeon platform code.
   - Cleanups and fixes for the Loongson platform code.
   - Cleanups and fixes to the firmware library.
   - Switch ATH79 platform to use the firmware library.
   - Grand overhault to the SEAD3 and Malta interrupt code.
   - Move the GIC interrupt code to drivers/irqchip
   - Lots of GIC cleanups and updates to the GIC code to use modern IRQ
     infrastructures and features of the kernel.
   - OF documentation updates for the GIC bindings
   - Move GIC clocksource driver to drivers/clocksource
   - Merge GIC clocksource driver with clockevent driver.
   - Further updates to bring the GIC clocksource driver up to date.
   - R3000 TLB code cleanups
   - Improvments to the Loongson 3 platform code.
   - Convert pr_warning to pr_warn.
   - Merge a bunch of small lantiq and ralink fixes that have been
     staged/lingering inside the openwrt tree for a while.
   - Update archhelp for IP22/IP32
   - Fix a number of issues for Loongson 1B.
   - New clocksource and clockevent driver for Loongson 1B.
   - Further work on clk handling for Loongson 1B.
   - Platform work for Broadcom BMIPS.
   - Error handling cleanups for TurboChannel.
   - Fixes and optimization to the microMIPS support.
   - Option to disable the FTLB.
   - Dump more relevant information on machine check exception
   - Change binfmt to allow arch to examine PT_*PROC headers
   - Support for new style FPU register model in O32
   - VDSO randomization.
   - BCM47xx cleanups
   - BCM47xx reimplement the way the kernel accesses NVRAM information.
   - Random cleanups
   - Add support for ATH25 platforms
   - Remove pointless locking code in some PCI platforms.
   - Some improvments to EVA support
   - Minor Alchemy cleanup"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits)
  MIPS: Add MFHC0 and MTHC0 instructions to uasm.
  MIPS: Cosmetic cleanups of page table headers.
  MIPS: Add CP0 macros for extended EntryLo registers
  MIPS: Remove now unused definition of phys_t.
  MIPS: Replace use of phys_t with phys_addr_t.
  MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT
  PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig.
  MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery
  MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO
  MIPS: <asm/types.h> fix indentation.
  MAINTAINERS: Add entry for BMIPS multiplatform kernel
  MIPS: Enable VDSO randomization
  MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration
  MIPS: Remove declaration of obsolete arch_init_clk_ops()
  MIPS: atomic.h: Reformat to fit in 79 columns
  MIPS: Apply `.insn' to fixup labels throughout
  MIPS: Fix microMIPS LL/SC immediate offsets
  MIPS: Kconfig: Only allow 32-bit microMIPS builds
  MIPS: signal.c: Fix an invalid cast in ISA mode bit handling
  MIPS: mm: Only build one microassembler that is suitable
  ...

1 files changed, 12 insertions, 12 deletions

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 7e2356fd5fd6..af2441dbfc12 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -311,8 +311,7 @@ static void __init cpmac_get_mac(int instance, unsigned char *dev_addr)
 					&dev_addr[0], &dev_addr[1],
 					&dev_addr[2], &dev_addr[3],
 					&dev_addr[4], &dev_addr[5]) != 6) {
-			pr_warning("cannot parse mac address, "
-					"using random address\n");
+			pr_warn("cannot parse mac address, using random address\n");
 			eth_random_addr(dev_addr);
 		}
 	} else
@@ -665,7 +664,7 @@ static int __init ar7_register_devices(void)
 
 	res = platform_device_register(&physmap_flash);
 	if (res)
-		pr_warning("unable to register physmap-flash: %d\n", res);
+		pr_warn("unable to register physmap-flash: %d\n", res);
 
 	if (ar7_is_titan())
 		titan_fixup_devices();
@@ -673,13 +672,13 @@ static int __init ar7_register_devices(void)
 	ar7_device_disable(vlynq_low_data.reset_bit);
 	res = platform_device_register(&vlynq_low);
 	if (res)
-		pr_warning("unable to register vlynq-low: %d\n", res);
+		pr_warn("unable to register vlynq-low: %d\n", res);
 
 	if (ar7_has_high_vlynq()) {
 		ar7_device_disable(vlynq_high_data.reset_bit);
 		res = platform_device_register(&vlynq_high);
 		if (res)
-			pr_warning("unable to register vlynq-high: %d\n", res);
+			pr_warn("unable to register vlynq-high: %d\n", res);
 	}
 
 	if (ar7_has_high_cpmac()) {
@@ -689,9 +688,10 @@ static int __init ar7_register_devices(void)
 
 			res = platform_device_register(&cpmac_high);
 			if (res)
-				pr_warning("unable to register cpmac-high: %d\n", res);
+				pr_warn("unable to register cpmac-high: %d\n",
+					res);
 		} else
-			pr_warning("unable to add cpmac-high phy: %d\n", res);
+			pr_warn("unable to add cpmac-high phy: %d\n", res);
 	} else
 		cpmac_low_data.phy_mask = 0xffffffff;
 
@@ -700,18 +700,18 @@ static int __init ar7_register_devices(void)
 		cpmac_get_mac(0, cpmac_low_data.dev_addr);
 		res = platform_device_register(&cpmac_low);
 		if (res)
-			pr_warning("unable to register cpmac-low: %d\n", res);
+			pr_warn("unable to register cpmac-low: %d\n", res);
 	} else
-		pr_warning("unable to add cpmac-low phy: %d\n", res);
+		pr_warn("unable to add cpmac-low phy: %d\n", res);
 
 	detect_leds();
 	res = platform_device_register(&ar7_gpio_leds);
 	if (res)
-		pr_warning("unable to register leds: %d\n", res);
+		pr_warn("unable to register leds: %d\n", res);
 
 	res = platform_device_register(&ar7_udc);
 	if (res)
-		pr_warning("unable to register usb slave: %d\n", res);
+		pr_warn("unable to register usb slave: %d\n", res);
 
 	/* Register watchdog only if enabled in hardware */
 	bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
@@ -726,7 +726,7 @@ static int __init ar7_register_devices(void)
 		ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
 		res = platform_device_register(&ar7_wdt);
 		if (res)
-			pr_warning("unable to register watchdog: %d\n", res);
+			pr_warn("unable to register watchdog: %d\n", res);
 	}
 
 	return 0;