Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Do not show error message for 32 interrupt lines
  Revert "microblaze: PCI fix typo fault in of_node pointer moving into pci_bus"
  microblaze: PCI fix typo fault in of_node pointer moving into pci_bus
  microblaze: Add support for early console on mdm
  microblaze: Simplify early console binding from DT
  microblaze: Get early printk console earlier
  microblaze: Standardise cpuinfo output for cache policy
  microblaze: Unprivileged stream instruction awareness
  microblaze: trivial: Fix typo fault
  microblaze: exec: Remove redundant set_fs(USER_DS)
  microblaze: Remove duplicated prototype of start_thread()
  microblaze: Fix unaligned value saving to the stack for system with MMU
  microblaze/irqs: Do not trace arch_local_{*,irq_*} functions

10 files changed, 128 insertions, 116 deletions

diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index f70a6047f08e..916aaedf1945 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -72,6 +72,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 	CI(pvr_user2, USER2);
 
 	CI(mmu, USE_MMU);
+	CI(mmu_privins, MMU_PRIVINS);
 	CI(endian, ENDIAN);
 
 	CI(use_icache, USE_ICACHE);
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index b16b994ca3d2..592bb2e838c4 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -119,6 +119,7 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 	ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2");
 
 	ci->mmu = fcpu(cpu, "xlnx,use-mmu");
+	ci->mmu_privins = fcpu(cpu, "xlnx,mmu-privileged-instr");
 	ci->endian = fcpu(cpu, "xlnx,endianness");
 
 	ci->ver_code = 0;
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index c1640c52711f..44394d80a683 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -88,4 +88,8 @@ void __init setup_cpuinfo(void)
 		printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__);
 		set_cpuinfo_static(&cpuinfo, cpu);
 	}
+
+	if (cpuinfo.mmu_privins)
+		printk(KERN_WARNING "%s: Stream instructions enabled"
+			" - USERSPACE CAN LOCK THIS KERNEL!\n", __func__);
 }
diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c
index b4048af02615..7b5dca7ed39d 100644
--- a/arch/microblaze/kernel/cpu/mb.c
+++ b/arch/microblaze/kernel/cpu/mb.c
@@ -97,6 +97,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		(cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "",
 		(cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : "");
 
+	count += seq_printf(m,
+			"Stream-insns:\t%sprivileged\n",
+			cpuinfo.mmu_privins ? "un" : "");
+
 	if (cpuinfo.use_icache)
 		count += seq_printf(m,
 				"Icache:\t\t%ukB\tline length:\t%dB\n",
@@ -110,10 +114,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 				"Dcache:\t\t%ukB\tline length:\t%dB\n",
 				cpuinfo.dcache_size >> 10,
 				cpuinfo.dcache_line_length);
+		seq_printf(m, "Dcache-Policy:\t");
 		if (cpuinfo.dcache_wb)
-			count += seq_printf(m, "\t\twrite-back\n");
+			count += seq_printf(m, "write-back\n");
 		else
-			count += seq_printf(m, "\t\twrite-through\n");
+			count += seq_printf(m, "write-through\n");
 	} else
 		count += seq_printf(m, "Dcache:\t\tno\n");
 
diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c
index c3616a080ebf..d26d92d47754 100644
--- a/arch/microblaze/kernel/early_printk.c
+++ b/arch/microblaze/kernel/early_printk.c
@@ -35,7 +35,7 @@ static void early_printk_uartlite_putc(char c)
 	 * we'll never timeout on a working UART.
 	 */
 
-	unsigned retries = 10000;
+	unsigned retries = 1000000;
 	/* read status bit - 0x8 offset */
 	while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
 		;
@@ -60,7 +60,7 @@ static void early_printk_uartlite_write(struct console *unused,
 static struct console early_serial_uartlite_console = {
 	.name = "earlyser",
 	.write = early_printk_uartlite_write,
-	.flags = CON_PRINTBUFFER,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
 	.index = -1,
 };
 #endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
@@ -104,7 +104,7 @@ static void early_printk_uart16550_write(struct console *unused,
 static struct console early_serial_uart16550_console = {
 	.name = "earlyser",
 	.write = early_printk_uart16550_write,
-	.flags = CON_PRINTBUFFER,
+	.flags = CON_PRINTBUFFER | CON_BOOT,
 	.index = -1,
 };
 #endif /* CONFIG_SERIAL_8250_CONSOLE */
@@ -127,48 +127,56 @@ void early_printk(const char *fmt, ...)
 
 int __init setup_early_printk(char *opt)
 {
+	int version = 0;
+
 	if (early_console_initialized)
 		return 1;
 
-#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
-	base_addr = early_uartlite_console();
+	base_addr = of_early_console(&version);
 	if (base_addr) {
-		early_console_initialized = 1;
 #ifdef CONFIG_MMU
 		early_console_reg_tlb_alloc(base_addr);
 #endif
-		early_console = &early_serial_uartlite_console;
-		early_printk("early_printk_console is enabled at 0x%08x\n",
-							base_addr);
-
-		/* register_console(early_console); */
-
-		return 0;
-	}
-#endif /* CONFIG_SERIAL_UARTLITE_CONSOLE */
-
+		switch (version) {
+#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
+		case UARTLITE:
+			printk(KERN_INFO "Early console on uartlite "
+						"at 0x%08x\n", base_addr);
+			early_console = &early_serial_uartlite_console;
+			break;
+#endif
 #ifdef CONFIG_SERIAL_8250_CONSOLE
-	base_addr = early_uart16550_console();
-	base_addr &= ~3; /* clear register offset */
-	if (base_addr) {
-		early_console_initialized = 1;
-#ifdef CONFIG_MMU
-		early_console_reg_tlb_alloc(base_addr);
+		case UART16550:
+			printk(KERN_INFO "Early console on uart16650 "
+						"at 0x%08x\n", base_addr);
+			early_console = &early_serial_uart16550_console;
+			break;
 #endif
-		early_console = &early_serial_uart16550_console;
-
-		early_printk("early_printk_console is enabled at 0x%08x\n",
-							base_addr);
-
-		/* register_console(early_console); */
+		default:
+			printk(KERN_INFO  "Unsupported early console %d\n",
+								version);
+			return 1;
+		}
 
+		register_console(early_console);
+		early_console_initialized = 1;
 		return 0;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-
 	return 1;
 }
 
+/* Remap early console to virtual address and do not allocate one TLB
+ * only for early console because of performance degression */
+void __init remap_early_printk(void)
+{
+	if (!early_console_initialized || !early_console)
+		return;
+	printk(KERN_INFO "early_printk_console remaping from 0x%x to ",
+								base_addr);
+	base_addr = (u32) ioremap(base_addr, PAGE_SIZE);
+	printk(KERN_CONT "0x%x\n", base_addr);
+}
+
 void __init disable_early_printk(void)
 {
 	if (!early_console_initialized || !early_console)
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 56572e923a83..e62be8379604 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -1113,23 +1113,23 @@ lw_r10_vm:	R3_TO_LWREG_VM_V	(10);
 lw_r11_vm:	R3_TO_LWREG_VM_V	(11);
 lw_r12_vm:	R3_TO_LWREG_VM_V	(12);
 lw_r13_vm:	R3_TO_LWREG_VM_V	(13);
-lw_r14_vm:	R3_TO_LWREG_VM		(14);
+lw_r14_vm:	R3_TO_LWREG_VM_V	(14);
 lw_r15_vm:	R3_TO_LWREG_VM_V	(15);
-lw_r16_vm:	R3_TO_LWREG_VM		(16);
+lw_r16_vm:	R3_TO_LWREG_VM_V	(16);
 lw_r17_vm:	R3_TO_LWREG_VM_V	(17);
 lw_r18_vm:	R3_TO_LWREG_VM_V	(18);
-lw_r19_vm:	R3_TO_LWREG_VM		(19);
-lw_r20_vm:	R3_TO_LWREG_VM		(20);
-lw_r21_vm:	R3_TO_LWREG_VM		(21);
-lw_r22_vm:	R3_TO_LWREG_VM		(22);
-lw_r23_vm:	R3_TO_LWREG_VM		(23);
-lw_r24_vm:	R3_TO_LWREG_VM		(24);
-lw_r25_vm:	R3_TO_LWREG_VM		(25);
-lw_r26_vm:	R3_TO_LWREG_VM		(26);
-lw_r27_vm:	R3_TO_LWREG_VM		(27);
-lw_r28_vm:	R3_TO_LWREG_VM		(28);
-lw_r29_vm:	R3_TO_LWREG_VM		(29);
-lw_r30_vm:	R3_TO_LWREG_VM		(30);
+lw_r19_vm:	R3_TO_LWREG_VM_V	(19);
+lw_r20_vm:	R3_TO_LWREG_VM_V	(20);
+lw_r21_vm:	R3_TO_LWREG_VM_V	(21);
+lw_r22_vm:	R3_TO_LWREG_VM_V	(22);
+lw_r23_vm:	R3_TO_LWREG_VM_V	(23);
+lw_r24_vm:	R3_TO_LWREG_VM_V	(24);
+lw_r25_vm:	R3_TO_LWREG_VM_V	(25);
+lw_r26_vm:	R3_TO_LWREG_VM_V	(26);
+lw_r27_vm:	R3_TO_LWREG_VM_V	(27);
+lw_r28_vm:	R3_TO_LWREG_VM_V	(28);
+lw_r29_vm:	R3_TO_LWREG_VM_V	(29);
+lw_r30_vm:	R3_TO_LWREG_VM_V	(30);
 lw_r31_vm:	R3_TO_LWREG_VM_V	(31);
 
 sw_table_vm:
@@ -1147,23 +1147,23 @@ sw_r10_vm:	SWREG_TO_R3_VM_V	(10);
 sw_r11_vm:	SWREG_TO_R3_VM_V	(11);
 sw_r12_vm:	SWREG_TO_R3_VM_V	(12);
 sw_r13_vm:	SWREG_TO_R3_VM_V	(13);
-sw_r14_vm:	SWREG_TO_R3_VM		(14);
+sw_r14_vm:	SWREG_TO_R3_VM_V	(14);
 sw_r15_vm:	SWREG_TO_R3_VM_V	(15);
-sw_r16_vm:	SWREG_TO_R3_VM		(16);
+sw_r16_vm:	SWREG_TO_R3_VM_V	(16);
 sw_r17_vm:	SWREG_TO_R3_VM_V	(17);
 sw_r18_vm:	SWREG_TO_R3_VM_V	(18);
-sw_r19_vm:	SWREG_TO_R3_VM		(19);
-sw_r20_vm:	SWREG_TO_R3_VM		(20);
-sw_r21_vm:	SWREG_TO_R3_VM		(21);
-sw_r22_vm:	SWREG_TO_R3_VM		(22);
-sw_r23_vm:	SWREG_TO_R3_VM		(23);
-sw_r24_vm:	SWREG_TO_R3_VM		(24);
-sw_r25_vm:	SWREG_TO_R3_VM		(25);
-sw_r26_vm:	SWREG_TO_R3_VM		(26);
-sw_r27_vm:	SWREG_TO_R3_VM		(27);
-sw_r28_vm:	SWREG_TO_R3_VM		(28);
-sw_r29_vm:	SWREG_TO_R3_VM		(29);
-sw_r30_vm:	SWREG_TO_R3_VM		(30);
+sw_r19_vm:	SWREG_TO_R3_VM_V	(19);
+sw_r20_vm:	SWREG_TO_R3_VM_V	(20);
+sw_r21_vm:	SWREG_TO_R3_VM_V	(21);
+sw_r22_vm:	SWREG_TO_R3_VM_V	(22);
+sw_r23_vm:	SWREG_TO_R3_VM_V	(23);
+sw_r24_vm:	SWREG_TO_R3_VM_V	(24);
+sw_r25_vm:	SWREG_TO_R3_VM_V	(25);
+sw_r26_vm:	SWREG_TO_R3_VM_V	(26);
+sw_r27_vm:	SWREG_TO_R3_VM_V	(27);
+sw_r28_vm:	SWREG_TO_R3_VM_V	(28);
+sw_r29_vm:	SWREG_TO_R3_VM_V	(29);
+sw_r30_vm:	SWREG_TO_R3_VM_V	(30);
 sw_r31_vm:	SWREG_TO_R3_VM_V	(31);
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index c88f066f41bd..eb41441c7fd0 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -134,7 +134,7 @@ void __init init_IRQ(void)
 	intr_type =
 		be32_to_cpup(of_get_property(intc,
 						"xlnx,kind-of-intr", NULL));
-	if (intr_type >= (1 << (nr_irq + 1)))
+	if (intr_type > (u32)((1ULL << nr_irq) - 1))
 		printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
 
 #ifdef CONFIG_SELFMOD_INTC
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 968648a81c1e..dbb812421d8a 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -237,7 +237,6 @@ unsigned long get_wchan(struct task_struct *p)
 /* Set up a thread for executing a new program */
 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 {
-	set_fs(USER_DS);
 	regs->pc = pc;
 	regs->r1 = usp;
 	regs->pt_mode = 0;
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index b15cc219b1d9..977484add216 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -53,69 +53,58 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 }
 
 #ifdef CONFIG_EARLY_PRINTK
-/* MS this is Microblaze specifig function */
-static int __init early_init_dt_scan_serial(unsigned long node,
-				const char *uname, int depth, void *data)
-{
-	unsigned long l;
-	char *p;
-	const __be32 *addr;
-
-	pr_debug("search \"serial\", depth: %d, uname: %s\n", depth, uname);
-
-/* find all serial nodes */
-	if (strncmp(uname, "serial", 6) != 0)
-		return 0;
-
-/* find compatible node with uartlite */
-	p = of_get_flat_dt_prop(node, "compatible", &l);
-	if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
-			(strncmp(p, "xlnx,opb-uartlite", 17) != 0) &&
-			(strncmp(p, "xlnx,axi-uartlite", 17) != 0))
-		return 0;
-
-	addr = of_get_flat_dt_prop(node, "reg", &l);
-	return be32_to_cpup(addr); /* return address */
-}
+char *stdout;
 
-/* this function is looking for early uartlite console - Microblaze specific */
-int __init early_uartlite_console(void)
-{
-	return of_scan_flat_dt(early_init_dt_scan_serial, NULL);
-}
-
-/* MS this is Microblaze specifig function */
-static int __init early_init_dt_scan_serial_full(unsigned long node,
+int __init early_init_dt_scan_chosen_serial(unsigned long node,
 				const char *uname, int depth, void *data)
 {
 	unsigned long l;
 	char *p;
-	unsigned int addr;
-
-	pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
-
-/* find all serial nodes */
-	if (strncmp(uname, "serial", 6) != 0)
-		return 0;
 
-	early_init_dt_check_for_initrd(node);
-
-/* find compatible node with uartlite */
-	p = of_get_flat_dt_prop(node, "compatible", &l);
-
-	if ((strncmp(p, "xlnx,xps-uart16550", 18) != 0) &&
-		(strncmp(p, "xlnx,axi-uart16550", 18) != 0))
-		return 0;
-
-	addr = *(u32 *)of_get_flat_dt_prop(node, "reg", &l);
-	addr += *(u32 *)of_get_flat_dt_prop(node, "reg-offset", &l);
-	return be32_to_cpu(addr); /* return address */
+	pr_debug("%s: depth: %d, uname: %s\n", __func__, depth, uname);
+
+	if (depth == 1 && (strcmp(uname, "chosen") == 0 ||
+				strcmp(uname, "chosen@0") == 0)) {
+		p = of_get_flat_dt_prop(node, "linux,stdout-path", &l);
+		if (p != NULL && l > 0)
+			stdout = p; /* store pointer to stdout-path */
+	}
+
+	if (stdout && strstr(stdout, uname)) {
+		p = of_get_flat_dt_prop(node, "compatible", &l);
+		pr_debug("Compatible string: %s\n", p);
+
+		if ((strncmp(p, "xlnx,xps-uart16550", 18) == 0) ||
+			(strncmp(p, "xlnx,axi-uart16550", 18) == 0)) {
+			unsigned int addr;
+
+			*(u32 *)data = UART16550;
+
+			addr = *(u32 *)of_get_flat_dt_prop(node, "reg", &l);
+			addr += *(u32 *)of_get_flat_dt_prop(node,
+							"reg-offset", &l);
+			/* clear register offset */
+			return be32_to_cpu(addr) & ~3;
+		}
+		if ((strncmp(p, "xlnx,xps-uartlite", 17) == 0) ||
+				(strncmp(p, "xlnx,opb-uartlite", 17) == 0) ||
+				(strncmp(p, "xlnx,axi-uartlite", 17) == 0) ||
+				(strncmp(p, "xlnx,mdm", 8) == 0)) {
+			unsigned int *addrp;
+
+			*(u32 *)data = UARTLITE;
+
+			addrp = of_get_flat_dt_prop(node, "reg", &l);
+			return be32_to_cpup(addrp); /* return address */
+		}
+	}
+	return 0;
 }
 
-/* this function is looking for early uartlite console - Microblaze specific */
-int __init early_uart16550_console(void)
+/* this function is looking for early console - Microblaze specific */
+int __init of_early_console(void *version)
 {
-	return of_scan_flat_dt(early_init_dt_scan_serial_full, NULL);
+	return of_scan_flat_dt(early_init_dt_scan_chosen_serial, version);
 }
 #endif
 
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8e2c09b7ff26..0e654a12d37e 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -59,6 +59,11 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_memory();
 
+#ifdef CONFIG_EARLY_PRINTK
+	/* remap early console to virtual address */
+	remap_early_printk();
+#endif
+
 	xilinx_pci_init();
 
 #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)