Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (41 commits)
  m68knommu: external interrupt support to ColdFire intc-simr controller
  m68knommu: external interrupt support to ColdFire intc-2 controller
  m68knommu: remove ColdFire CLOCK_DIV config option
  m68knommu: fix gpio warnings for ColdFire 5407 targets
  m68knommu: fix gpio warnings for ColdFire 532x targets
  m68knommu: fix gpio warnings for ColdFire 5307 targets
  m68knommu: fix gpio warnings for ColdFire 527x targets
  m68knommu: fix gpio warnings for ColdFire 5272 targets
  m68knommu: fix gpio warnings for ColdFire 5249 targets
  m68knommu: fix gpio warnings for ColdFire 523x targets
  m68knommu: fix gpio warnings for ColdFire 520x targets
  m68knommu: fix gpio warnings for ColdFire 5206e targets
  m68knommu: fix gpio warnings for ColdFire 5206 targets
  m68knommu: fixing compiler warnings
  m68knommu: limit interrupts supported by ColdFire intc-simr driver
  m68knommu: move some init code out of unmask routine for ColdFire intc-2
  m68knommu: limit interrupts supported by ColdFire intc-2 driver
  m68knommu: add basic support for the ColdFire based FireBee board
  m68knommu: make ColdFire internal peripheral region configurable
  m68knommu: clean up definitions of ColdFire peripheral base registers
  ...

15 files changed, 285 insertions, 167 deletions

diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
index 213028cbe110..c94557b91448 100644
--- a/arch/m68k/include/asm/coldfire.h
+++ b/arch/m68k/include/asm/coldfire.h
@@ -14,39 +14,35 @@
 
 
 /*
- *	Define master clock frequency. This is essentially done at config
- *	time now. No point enumerating dozens of possible clock options
- *	here. Also the peripheral clock (bus clock) divide ratio is set
- *	at config time too.
+ *	Define master clock frequency. This is done at config time now.
+ *	No point enumerating dozens of possible clock options here. And
+ *	in any case new boards come along from time to time that have yet
+ *	another different clocking frequency.
  */
 #ifdef CONFIG_CLOCK_SET
 #define	MCF_CLK		CONFIG_CLOCK_FREQ
-#define	MCF_BUSCLK	(CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
 #else
 #error "Don't know what your ColdFire CPU clock frequency is??"
 #endif
 
 /*
- *	Define the processor support peripherals base address.
- *	This is generally setup by the boards start up code.
+ *	Define the processor internal peripherals base address.
+ *
+ *	The majority of ColdFire parts use an MBAR register to set
+ *	the base address. Some have an IPSBAR register instead, and it
+ *	has slightly different rules on its size and alignment. Some
+ *	parts have fixed addresses and the internal peripherals cannot
+ *	be relocated in the CPU address space.
+ *
+ *	The value of MBAR or IPSBAR is config time selectable, we no
+ *	longer hard define it here. No MBAR or IPSBAR will be defined if
+ *	this part has a fixed peripheral address map.
  */
-#define	MCF_MBAR	0x10000000
-#define	MCF_MBAR2	0x80000000
-#if defined(CONFIG_M54xx)
-#define	MCF_IPSBAR	MCF_MBAR
-#elif defined(CONFIG_M520x)
-#define	MCF_IPSBAR	0xFC000000
-#else
-#define	MCF_IPSBAR	0x40000000
+#ifdef CONFIG_MBAR
+#define	MCF_MBAR	CONFIG_MBAR
 #endif
-
-#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
-    defined(CONFIG_M520x)
-#undef MCF_MBAR
-#define	MCF_MBAR	MCF_IPSBAR
-#elif defined(CONFIG_M532x)
-#undef MCF_MBAR
-#define MCF_MBAR	0x00000000
+#ifdef CONFIG_IPSBAR
+#define	MCF_IPSBAR	CONFIG_IPSBAR
 #endif
 
 /****************************************************************************/
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
index 561b03b5ddf8..9015eadd5c00 100644
--- a/arch/m68k/include/asm/m5206sim.h
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -14,6 +14,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m5206)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		MCF_CLK
 
 #include <asm/m52xxacr.h>
 
@@ -48,14 +49,14 @@
 #define	MCFSIM_SWIVR		0x42		/* SW Watchdog intr reg (r/w) */
 #define	MCFSIM_SWSR		0x43		/* SW Watchdog service (r/w) */
 
-#define	MCFSIM_DCRR		0x46		/* DRAM Refresh reg (r/w) */
-#define	MCFSIM_DCTR		0x4a		/* DRAM Timing reg (r/w) */
-#define	MCFSIM_DAR0		0x4c		/* DRAM 0 Address reg(r/w) */
-#define	MCFSIM_DMR0		0x50		/* DRAM 0 Mask reg (r/w) */
-#define	MCFSIM_DCR0		0x57		/* DRAM 0 Control reg (r/w) */
-#define	MCFSIM_DAR1		0x58		/* DRAM 1 Address reg (r/w) */
-#define	MCFSIM_DMR1		0x5c		/* DRAM 1 Mask reg (r/w) */
-#define	MCFSIM_DCR1		0x63		/* DRAM 1 Control reg (r/w) */
+#define	MCFSIM_DCRR		(MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */
+#define	MCFSIM_DCTR		(MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */
+#define	MCFSIM_DAR0		(MCF_MBAR + 0x4c) /* DRAM 0 Address reg(r/w) */
+#define	MCFSIM_DMR0		(MCF_MBAR + 0x50) /* DRAM 0 Mask reg (r/w) */
+#define	MCFSIM_DCR0		(MCF_MBAR + 0x57) /* DRAM 0 Control reg (r/w) */
+#define	MCFSIM_DAR1		(MCF_MBAR + 0x58) /* DRAM 1 Address reg (r/w) */
+#define	MCFSIM_DMR1		(MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */
+#define	MCFSIM_DCR1		(MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */
 
 #define	MCFSIM_CSAR0		0x64		/* CS 0 Address 0 reg (r/w) */
 #define	MCFSIM_CSMR0		0x68		/* CS 0 Mask 0 reg (r/w) */
@@ -89,9 +90,15 @@
 #define	MCFSIM_PAR		0xcb		/* Pin Assignment reg (r/w) */
 #endif
 
+#define	MCFTIMER_BASE1		(MCF_MBAR + 0x100)	/* Base of TIMER1 */
+#define	MCFTIMER_BASE2		(MCF_MBAR + 0x120)	/* Base of TIMER2 */
+
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x1c5)	/* Parallel Direction (r/w) */
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x1c9)	/* Parallel Port Value (r/w) */
 
+#define	MCFDMA_BASE0		(MCF_MBAR + 0x200)	/* Base address DMA 0 */
+#define	MCFDMA_BASE1		(MCF_MBAR + 0x240)	/* Base address DMA 1 */
+
 #if defined(CONFIG_NETtel)
 #define	MCFUART_BASE1		0x180		/* Base address of UART1 */
 #define	MCFUART_BASE2		0x140		/* Base address of UART2 */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index 88ed8239fe4e..55d5a4c5fe0b 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -13,13 +13,14 @@
 
 #define	CPU_NAME		"COLDFIRE(m520x)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m52xxacr.h>
 
 /*
  *  Define the 520x SIM register set addresses.
  */
-#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC0        0xFC048000  /* Base for Interrupt Ctrl 0 */
 #define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
 #define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
 #define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
@@ -35,9 +36,9 @@
  *  address to the SIMR and CIMR registers (not offsets into IPSBAR).
  *  The 520x family only has a single INTC unit.
  */
-#define MCFINTC0_SIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_SIMR)
-#define MCFINTC0_CIMR       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_CIMR)
-#define	MCFINTC0_ICR0       (MCF_IPSBAR + MCFICM_INTC0 + MCFINTC_ICR0)
+#define MCFINTC0_SIMR       (MCFICM_INTC0 + MCFINTC_SIMR)
+#define MCFINTC0_CIMR       (MCFICM_INTC0 + MCFINTC_CIMR)
+#define	MCFINTC0_ICR0       (MCFICM_INTC0 + MCFINTC_ICR0)
 #define MCFINTC1_SIMR       (0)
 #define MCFINTC1_CIMR       (0)
 #define	MCFINTC1_ICR0       (0)
@@ -52,19 +53,22 @@
 /*
  *  SDRAM configuration registers.
  */
-#define MCFSIM_SDMR         0x000a8000	/* SDRAM Mode/Extended Mode Register */
-#define MCFSIM_SDCR         0x000a8004	/* SDRAM Control Register */
-#define MCFSIM_SDCFG1       0x000a8008	/* SDRAM Configuration Register 1 */
-#define MCFSIM_SDCFG2       0x000a800c	/* SDRAM Configuration Register 2 */
-#define MCFSIM_SDCS0        0x000a8110	/* SDRAM Chip Select 0 Configuration */
-#define MCFSIM_SDCS1        0x000a8114	/* SDRAM Chip Select 1 Configuration */
+#define MCFSIM_SDMR         0xFC0a8000	/* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0xFC0a8004	/* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0xFC0a8008	/* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0xFC0a800c	/* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0xFC0a8110	/* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0xFC0a8114	/* SDRAM Chip Select 1 Configuration */
 
 /*
  * EPORT and GPIO registers.
  */
+#define MCFEPORT_EPPAR			0xFC088000
 #define MCFEPORT_EPDDR			0xFC088002
+#define MCFEPORT_EPIER			0xFC088003
 #define MCFEPORT_EPDR			0xFC088004
 #define MCFEPORT_EPPDR			0xFC088005
+#define MCFEPORT_EPFR			0xFC088006
 
 #define MCFGPIO_PODR_BUSCTL		0xFC0A4000
 #define MCFGPIO_PODR_BE			0xFC0A4001
@@ -119,10 +123,10 @@
 #define MCFGPIO_IRQ_MAX			8
 #define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
 
-#define MCF_GPIO_PAR_UART                   (0xA4036)
-#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
-#define MCF_GPIO_PAR_QSPI                   (0xA4034)
-#define MCF_GPIO_PAR_FEC                    (0xA4038)
+#define MCF_GPIO_PAR_UART		0xFC0A4036
+#define MCF_GPIO_PAR_FECI2C		0xFC0A4033
+#define MCF_GPIO_PAR_QSPI		0xFC0A4034
+#define MCF_GPIO_PAR_FEC		0xFC0A4038
 
 #define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
 #define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
@@ -134,11 +138,23 @@
 #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
 
 /*
+ *  PIT timer module.
+ */
+#define	MCFPIT_BASE1		0xFC080000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0xFC084000	/* Base address of TIMER2 */
+
+/*
  *  UART module.
  */
-#define MCFUART_BASE1		0x60000		/* Base address of UART1 */
-#define MCFUART_BASE2		0x64000		/* Base address of UART2 */
-#define MCFUART_BASE3		0x68000		/* Base address of UART2 */
+#define MCFUART_BASE1		0xFC060000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xFC064000	/* Base address of UART2 */
+#define MCFUART_BASE3		0xFC068000	/* Base address of UART2 */
+
+/*
+ *  FEC module.
+ */
+#define	MCFFEC_BASE		0xFC030000	/* Base of FEC ethernet */
+#define	MCFFEC_SIZE		0x800		/* Register set size */
 
 /*
  *  Reset Controll Unit.
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 4ad7a00257a8..8996df62ede4 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -13,14 +13,16 @@
 
 #define	CPU_NAME		"COLDFIRE(m523x)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m52xxacr.h>
 
 /*
  *	Define the 523x SIM register set addresses.
  */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 0 */
+
 #define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
 #define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
 #define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
@@ -39,11 +41,11 @@
 /*
  *	SDRAM configuration registers.
  */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#define	MCFSIM_DCR		(MCF_IPSBAR + 0x44)	/* Control */
+#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x48)	/* Base address 0 */
+#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x4c)	/* Address mask 0 */
+#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x50)	/* Base address 1 */
+#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
 
 /*
  *  Reset Controll Unit (relative to IPSBAR).
@@ -57,10 +59,19 @@
 /*
  *  UART module.
  */
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#define MCFUART_BASE1		(MCF_IPSBAR + 0x200)
+#define MCFUART_BASE2		(MCF_IPSBAR + 0x240)
+#define MCFUART_BASE3		(MCF_IPSBAR + 0x280)
+
+/*
+ *  FEC ethernet module.
+ */
+#define	MCFFEC_BASE		(MCF_IPSBAR + 0x1000)
+#define	MCFFEC_SIZE		0x800
 
+/*
+ *  GPIO module.
+ */
 #define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
 #define MCFGPIO_PODR_DATAH	(MCF_IPSBAR + 0x100001)
 #define MCFGPIO_PODR_DATAL	(MCF_IPSBAR + 0x100002)
@@ -118,12 +129,22 @@
 #define MCFGPIO_PCLRR_ETPU	(MCF_IPSBAR + 0x10003C)
 
 /*
- * EPort
+ * PIT timer base addresses.
  */
+#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x150000)
+#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x160000)
+#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x170000)
+#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x180000)
 
+/*
+ * EPort
+ */
+#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x130000)
 #define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x130003)
 #define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
 #define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
+#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x130006)
 
 /*
  * Generic GPIO support
@@ -143,5 +164,14 @@
 */
 #define	MCFGPIO_PAR_QSPI	(MCF_IPSBAR + 0x10004A)
 #define	MCFGPIO_PAR_TIMER	(MCF_IPSBAR + 0x10004C)
+
+/*
+ * DMA unit base addresses.
+ */
+#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x100)
+#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x140)
+#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x180)
+#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x1C0)
+
 /****************************************************************************/
 #endif	/* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 4908b118f2fd..805714ca8d7d 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -13,10 +13,16 @@
 
 #define	CPU_NAME		"COLDFIRE(m5249)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m52xxacr.h>
 
 /*
+ *	The 5249 has a second MBAR region, define its address.
+ */
+#define MCF_MBAR2		0x80000000
+
+/*
  *	Define the 5249 SIM register set addresses.
  */
 #define	MCFSIM_RSR		0x00		/* Reset Status reg (r/w) */
@@ -55,11 +61,17 @@
 #define MCFSIM_CSMR3		0xa8		/* CS 3 Mask reg (r/w) */
 #define MCFSIM_CSCR3		0xae		/* CS 3 Control reg (r/w) */
 
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
+
+/*
+ *	Timer module.
+ */
+#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
+#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
 
 /*
  *	UART module.
@@ -68,6 +80,14 @@
 #define MCFUART_BASE2		0x200           /* Base address of UART2 */
 
 /*
+ *	DMA unit base addresses.
+ */
+#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
+#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
+#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
+#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
+
+/*
  *	Some symbol defines for the above...
  */
 #define	MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
index b7cc50abc831..759c2b07a994 100644
--- a/arch/m68k/include/asm/m5272sim.h
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -14,6 +14,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m5272)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		MCF_CLK
 
 #include <asm/m52xxacr.h>
 
@@ -80,6 +81,13 @@
 #define	MCFSIM_PCDAT		(MCF_MBAR + 0x96) /* Port C Data (r/w) */
 #define	MCFSIM_PDCNT		(MCF_MBAR + 0x98) /* Port D Control (r/w) */
 
+#define	MCFDMA_BASE0		(MCF_MBAR + 0xe0) /* Base address DMA 0 */
+
+#define	MCFTIMER_BASE1		(MCF_MBAR + 0x200) /* Base address TIMER1 */
+#define	MCFTIMER_BASE2		(MCF_MBAR + 0x220) /* Base address TIMER2 */
+#define	MCFTIMER_BASE3		(MCF_MBAR + 0x240) /* Base address TIMER4 */
+#define	MCFTIMER_BASE4		(MCF_MBAR + 0x260) /* Base address TIMER3 */
+
 /*
  *	Define system peripheral IRQ usage.
  */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index e8042e8bc003..74855a66c050 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -13,14 +13,16 @@
 
 #define	CPU_NAME		"COLDFIRE(m527x)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m52xxacr.h>
 
 /*
  *	Define the 5270/5271 SIM register set addresses.
  */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
+#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 1 */
+
 #define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
 #define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
 #define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
@@ -42,29 +44,45 @@
  *	SDRAM configuration registers.
  */
 #ifdef CONFIG_M5271
-#define	MCFSIM_DCR		0x40		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#define	MCFSIM_DCR		(MCF_IPSBAR + 0x40)	/* Control */
+#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x48)	/* Base address 0 */
+#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x4c)	/* Address mask 0 */
+#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x50)	/* Base address 1 */
+#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
 #endif
 #ifdef CONFIG_M5275
-#define	MCFSIM_DMR		0x40		/* SDRAM mode */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DCFG1		0x48		/* SDRAM configuration 1 */
-#define	MCFSIM_DCFG2		0x4c		/* SDRAM configuration 2 */
-#define	MCFSIM_DBAR0		0x50		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x54		/* SDRAM address mask 0 */
-#define	MCFSIM_DBAR1		0x58		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x5c		/* SDRAM address mask 1 */
+#define	MCFSIM_DMR		(MCF_IPSBAR + 0x40)	/* Mode */
+#define	MCFSIM_DCR		(MCF_IPSBAR + 0x44)	/* Control */
+#define	MCFSIM_DCFG1		(MCF_IPSBAR + 0x48)	/* Configuration 1 */
+#define	MCFSIM_DCFG2		(MCF_IPSBAR + 0x4c)	/* Configuration 2 */
+#define	MCFSIM_DBAR0		(MCF_IPSBAR + 0x50)	/* Base address 0 */
+#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x54)	/* Address mask 0 */
+#define	MCFSIM_DBAR1		(MCF_IPSBAR + 0x58)	/* Base address 1 */
+#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x5c)	/* Address mask 1 */
 #endif
 
 /*
+ *	DMA unit base addresses.
+ */
+#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x100)
+#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x140)
+#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x180)
+#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x1C0)
+
+/*
  *	UART module.
  */
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#define MCFUART_BASE1		(MCF_IPSBAR + 0x200)
+#define MCFUART_BASE2		(MCF_IPSBAR + 0x240)
+#define MCFUART_BASE3		(MCF_IPSBAR + 0x280)
+
+/*
+ *	FEC ethernet module.
+ */
+#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x1000)
+#define	MCFFEC_SIZE0		0x800
+#define	MCFFEC_BASE1		(MCF_IPSBAR + 0x1800)
+#define	MCFFEC_SIZE1		0x800
 
 #ifdef CONFIG_M5271
 #define MCFGPIO_PODR_ADDR	(MCF_IPSBAR + 0x100000)
@@ -231,14 +249,22 @@
 #endif
 
 /*
- * EPort
+ * PIT timer base addresses.
  */
+#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x150000)
+#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x160000)
+#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x170000)
+#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x180000)
 
+/*
+ * EPort
+ */
+#define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x130000)
 #define MCFEPORT_EPDDR		(MCF_IPSBAR + 0x130002)
+#define MCFEPORT_EPIER		(MCF_IPSBAR + 0x130003)
 #define MCFEPORT_EPDR		(MCF_IPSBAR + 0x130004)
 #define MCFEPORT_EPPDR		(MCF_IPSBAR + 0x130005)
-
-
+#define MCFEPORT_EPFR		(MCF_IPSBAR + 0x130006)
 
 /*
  *	GPIO pins setups to enable the UARTs.
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index a6d2f4d9aaa0..d798bd5df56c 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -13,14 +13,16 @@
 
 #define	CPU_NAME		"COLDFIRE(m528x)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		MCF_CLK
 
 #include <asm/m52xxacr.h>
 
 /*
  *	Define the 5280/5282 SIM register set addresses.
  */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC0		(MCF_IPSBAR + 0x0c00)	/* Base for Interrupt Ctrl 0 */
+#define	MCFICM_INTC1		(MCF_IPSBAR + 0x0d00)	/* Base for Interrupt Ctrl 0 */
+
 #define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
 #define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
 #define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
@@ -39,18 +41,32 @@
 /*
  *	SDRAM configuration registers.
  */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#define	MCFSIM_DCR		(MCF_IPSBAR + 0x00000044) /* Control */
+#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x00000048) /* Base address 0 */
+#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x0000004c) /* Address mask 0 */
+#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x00000050) /* Base address 1 */
+#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x00000054) /* Address mask 1 */
+
+/*
+ *	DMA unit base addresses.
+ */
+#define	MCFDMA_BASE0		(MCF_IPSBAR + 0x00000100)
+#define	MCFDMA_BASE1		(MCF_IPSBAR + 0x00000140)
+#define	MCFDMA_BASE2		(MCF_IPSBAR + 0x00000180)
+#define	MCFDMA_BASE3		(MCF_IPSBAR + 0x000001C0)
 
 /*
  *	UART module.
  */
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x240           /* Base address of UART2 */
-#define MCFUART_BASE3		0x280           /* Base address of UART3 */
+#define	MCFUART_BASE1		(MCF_IPSBAR + 0x00000200)
+#define	MCFUART_BASE2		(MCF_IPSBAR + 0x00000240)
+#define	MCFUART_BASE3		(MCF_IPSBAR + 0x00000280)
+
+/*
+ *	FEC ethernet module.
+ */
+#define	MCFFEC_BASE		(MCF_IPSBAR + 0x00001000)
+#define	MCFFEC_SIZE		0x800
 
 /*
  * 	GPIO registers
@@ -163,6 +179,14 @@
 #define MCFGPIO_PUAPAR		(MCF_IPSBAR + 0x0010005C)
 
 /*
+ * PIT timer base addresses.
+ */
+#define	MCFPIT_BASE1		(MCF_IPSBAR + 0x00150000)
+#define	MCFPIT_BASE2		(MCF_IPSBAR + 0x00160000)
+#define	MCFPIT_BASE3		(MCF_IPSBAR + 0x00170000)
+#define	MCFPIT_BASE4		(MCF_IPSBAR + 0x00180000)
+
+/*
  * 	Edge Port registers
  */
 #define MCFEPORT_EPPAR		(MCF_IPSBAR + 0x00130000)
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
index 0bf57397e7a9..4c94c01f36c4 100644
--- a/arch/m68k/include/asm/m5307sim.h
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -16,6 +16,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m5307)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m53xxacr.h>
 
@@ -89,16 +90,30 @@
 #define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
 #endif /* CONFIG_OLDMASK */
 
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM Addr/Ctrl 0 */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM Mask 0 */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM Addr/Ctrl 1 */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM Mask 1 */
+
+/*
+ *  Timer module.
+ */
+#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
+#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
 
 #define	MCFSIM_PADDR		(MCF_MBAR + 0x244)
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
 /*
+ *  DMA unit base addresses.
+ */
+#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
+#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
+#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
+#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
+
+/*
  *  UART module.
  */
 #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index e6470f8ca324..ba4cc784f574 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -11,6 +11,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m532x)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 3)
 
 #include <asm/m53xxacr.h>
 
@@ -85,6 +86,14 @@
 #define MCFUART_BASE2		0xFC064000	/* Base address of UART2 */
 #define MCFUART_BASE3		0xFC068000	/* Base address of UART3 */
 
+/*
+ *  Timer module.
+ */
+#define MCFTIMER_BASE1		0xFC070000	/* Base address of TIMER1 */
+#define MCFTIMER_BASE2		0xFC074000	/* Base address of TIMER2 */
+#define MCFTIMER_BASE3		0xFC078000	/* Base address of TIMER3 */
+#define MCFTIMER_BASE4		0xFC07C000	/* Base address of TIMER4 */
+
 /*********************************************************************
  *
  * Reset Controller Module
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
index 75f5c28a551d..762c58c89050 100644
--- a/arch/m68k/include/asm/m5407sim.h
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -16,6 +16,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m5407)"
 #define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m54xxacr.h>
 
@@ -72,11 +73,17 @@
 #define MCFSIM_CSMR7		0xd8		/* CS 7 Mask reg (r/w) */
 #define MCFSIM_CSCR7		0xde		/* CS 7 Control reg (r/w) */
 
-#define MCFSIM_DCR		0x100		/* DRAM Control reg (r/w) */
-#define MCFSIM_DACR0		0x108		/* DRAM 0 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR0		0x10c		/* DRAM 0 Mask reg (r/w) */
-#define MCFSIM_DACR1		0x110		/* DRAM 1 Addr and Ctrl (r/w) */
-#define MCFSIM_DMR1		0x114		/* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
+
+/*
+ *	Timer module.
+ */
+#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
+#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
 
 #define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
 #define MCFUART_BASE2		0x200           /* Base address of UART2 */
@@ -85,6 +92,14 @@
 #define	MCFSIM_PADAT		(MCF_MBAR + 0x248)
 
 /*
+ *	DMA unit base addresses.
+ */
+#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
+#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
+#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
+#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
+
+/*
  * Generic GPIO support
  */
 #define MCFGPIO_PIN_MAX			16
diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h
index 462ae5328441..1ed8bfb02772 100644
--- a/arch/m68k/include/asm/m54xxsim.h
+++ b/arch/m68k/include/asm/m54xxsim.h
@@ -7,6 +7,7 @@
 
 #define	CPU_NAME		"COLDFIRE(m54xx)"
 #define	CPU_INSTR_PER_JIFFY	2
+#define	MCF_BUSCLK		(MCF_CLK / 2)
 
 #include <asm/m54xxacr.h>
 
@@ -15,7 +16,8 @@
 /*
  *      Interrupt Controller Registers
  */
-#define MCFICM_INTC0		0x0700		/* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC0		(MCF_MBAR + 0x700) 	/* Base for Interrupt Ctrl 0 */
+
 #define MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
 #define MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
 #define MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
@@ -48,6 +50,16 @@
 #define MCFGPIO_IRQ_VECBASE	-1
 
 /*
+ *	EDGE Port support.
+ */
+#define	MCFEPORT_EPPAR		(MCF_MBAR + 0xf00)	/* Pin assignment */
+#define	MCFEPORT_EPDDR		(MCF_MBAR + 0xf04)	/* Data direction */
+#define	MCFEPORT_EPIER		(MCF_MBAR + 0xf05)	/* Interrupt enable */
+#define	MCFEPORT_EPDR		(MCF_MBAR + 0xf08)	/* Port data (w) */
+#define	MCFEPORT_EPPDR		(MCF_MBAR + 0xf09)	/* Port data (r) */
+#define	MCFEPORT_EPFR		(MCF_MBAR + 0xf0c)	/* Flags */
+
+/*
  *	Some PSC related definitions
  */
 #define MCF_PAR_PSC(x)		(0x000A4F-((x)&0x3))
diff --git a/arch/m68k/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h
index 705c52c79cd8..10bc7e391c14 100644
--- a/arch/m68k/include/asm/mcfdma.h
+++ b/arch/m68k/include/asm/mcfdma.h
@@ -11,29 +11,6 @@
 #define	mcfdma_h
 /****************************************************************************/
 
-
-/*
- *	Get address specific defines for this Coldfire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFDMA_BASE0		0x200		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x240		/* Base address of DMA 1 */
-#elif defined(CONFIG_M5272)
-#define	MCFDMA_BASE0		0x0e0		/* Base address of DMA 0 */
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-/* These are relative to the IPSBAR, not MBAR */
-#define	MCFDMA_BASE0		0x100		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x140		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x180		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x1C0		/* Base address of DMA 3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define	MCFDMA_BASE0		0x300		/* Base address of DMA 0 */
-#define	MCFDMA_BASE1		0x340		/* Base address of DMA 1 */
-#define	MCFDMA_BASE2		0x380		/* Base address of DMA 2 */
-#define	MCFDMA_BASE3		0x3C0		/* Base address of DMA 3 */
-#endif
-
-
 #if !defined(CONFIG_M5272)
 
 /*
diff --git a/arch/m68k/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h
index f570cf64fd29..9fd321ca0725 100644
--- a/arch/m68k/include/asm/mcfpit.h
+++ b/arch/m68k/include/asm/mcfpit.h
@@ -11,22 +11,8 @@
 #define	mcfpit_h
 /****************************************************************************/
 
-
-/*
- *	Get address specific defines for the 5270/5271, 5280/5282, and 5208.
- */
-#if defined(CONFIG_M520x)
-#define	MCFPIT_BASE1		0x00080000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00084000	/* Base address of TIMER2 */
-#else
-#define	MCFPIT_BASE1		0x00150000	/* Base address of TIMER1 */
-#define	MCFPIT_BASE2		0x00160000	/* Base address of TIMER2 */
-#define	MCFPIT_BASE3		0x00170000	/* Base address of TIMER3 */
-#define	MCFPIT_BASE4		0x00180000	/* Base address of TIMER4 */
-#endif
-
 /*
- *	Define the PIT timer register set addresses.
+ *	Define the PIT timer register address offsets.
  */
 #define	MCFPIT_PCSR		0x0		/* PIT control register */
 #define	MCFPIT_PMR		0x2		/* PIT modulus register */
diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
index 0f90f6d2227a..92b276fe8240 100644
--- a/arch/m68k/include/asm/mcftimer.h
+++ b/arch/m68k/include/asm/mcftimer.h
@@ -12,29 +12,6 @@
 #define	mcftimer_h
 /****************************************************************************/
 
-
-/*
- *	Get address specific defines for this ColdFire member.
- */
-#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
-#define	MCFTIMER_BASE1		0x100		/* Base address of TIMER1 */
-#define	MCFTIMER_BASE2		0x120		/* Base address of TIMER2 */
-#elif defined(CONFIG_M5272)
-#define MCFTIMER_BASE1		0x200           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x220           /* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0x240           /* Base address of TIMER4 */
-#define MCFTIMER_BASE4		0x260           /* Base address of TIMER3 */
-#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
-#define MCFTIMER_BASE1		0x140           /* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0x180           /* Base address of TIMER2 */
-#elif defined(CONFIG_M532x)
-#define MCFTIMER_BASE1		0xfc070000	/* Base address of TIMER1 */
-#define MCFTIMER_BASE2		0xfc074000	/* Base address of TIMER2 */
-#define MCFTIMER_BASE3		0xfc078000	/* Base address of TIMER3 */
-#define MCFTIMER_BASE4		0xfc07c000	/* Base address of TIMER4 */
-#endif
-
-
 /*
  *	Define the TIMER register set addresses.
  */