Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...

1 files changed, 25 insertions, 33 deletions

diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index c1cc4e99aa94..b2fd000b9285 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -1007,9 +1007,9 @@ void bad_super_trap (struct frame *fp)
 
 asmlinkage void trap_c(struct frame *fp)
 {
-	int sig;
+	int sig, si_code;
+	void __user *addr;
 	int vector = (fp->ptregs.vector >> 2) & 0xff;
-	siginfo_t info;
 
 	if (fp->ptregs.sr & PS_S) {
 		if (vector == VEC_TRACE) {
@@ -1029,21 +1029,21 @@ asmlinkage void trap_c(struct frame *fp)
 	/* send the appropriate signal to the user program */
 	switch (vector) {
 	    case VEC_ADDRERR:
-		info.si_code = BUS_ADRALN;
+		si_code = BUS_ADRALN;
 		sig = SIGBUS;
 		break;
 	    case VEC_ILLEGAL:
 	    case VEC_LINE10:
 	    case VEC_LINE11:
-		info.si_code = ILL_ILLOPC;
+		si_code = ILL_ILLOPC;
 		sig = SIGILL;
 		break;
 	    case VEC_PRIV:
-		info.si_code = ILL_PRVOPC;
+		si_code = ILL_PRVOPC;
 		sig = SIGILL;
 		break;
 	    case VEC_COPROC:
-		info.si_code = ILL_COPROC;
+		si_code = ILL_COPROC;
 		sig = SIGILL;
 		break;
 	    case VEC_TRAP1:
@@ -1060,76 +1060,74 @@ asmlinkage void trap_c(struct frame *fp)
 	    case VEC_TRAP12:
 	    case VEC_TRAP13:
 	    case VEC_TRAP14:
-		info.si_code = ILL_ILLTRP;
+		si_code = ILL_ILLTRP;
 		sig = SIGILL;
 		break;
 	    case VEC_FPBRUC:
 	    case VEC_FPOE:
 	    case VEC_FPNAN:
-		info.si_code = FPE_FLTINV;
+		si_code = FPE_FLTINV;
 		sig = SIGFPE;
 		break;
 	    case VEC_FPIR:
-		info.si_code = FPE_FLTRES;
+		si_code = FPE_FLTRES;
 		sig = SIGFPE;
 		break;
 	    case VEC_FPDIVZ:
-		info.si_code = FPE_FLTDIV;
+		si_code = FPE_FLTDIV;
 		sig = SIGFPE;
 		break;
 	    case VEC_FPUNDER:
-		info.si_code = FPE_FLTUND;
+		si_code = FPE_FLTUND;
 		sig = SIGFPE;
 		break;
 	    case VEC_FPOVER:
-		info.si_code = FPE_FLTOVF;
+		si_code = FPE_FLTOVF;
 		sig = SIGFPE;
 		break;
 	    case VEC_ZERODIV:
-		info.si_code = FPE_INTDIV;
+		si_code = FPE_INTDIV;
 		sig = SIGFPE;
 		break;
 	    case VEC_CHK:
 	    case VEC_TRAP:
-		info.si_code = FPE_INTOVF;
+		si_code = FPE_INTOVF;
 		sig = SIGFPE;
 		break;
 	    case VEC_TRACE:		/* ptrace single step */
-		info.si_code = TRAP_TRACE;
+		si_code = TRAP_TRACE;
 		sig = SIGTRAP;
 		break;
 	    case VEC_TRAP15:		/* breakpoint */
-		info.si_code = TRAP_BRKPT;
+		si_code = TRAP_BRKPT;
 		sig = SIGTRAP;
 		break;
 	    default:
-		info.si_code = ILL_ILLOPC;
+		si_code = ILL_ILLOPC;
 		sig = SIGILL;
 		break;
 	}
-	info.si_signo = sig;
-	info.si_errno = 0;
 	switch (fp->ptregs.format) {
 	    default:
-		info.si_addr = (void *) fp->ptregs.pc;
+		addr = (void __user *) fp->ptregs.pc;
 		break;
 	    case 2:
-		info.si_addr = (void *) fp->un.fmt2.iaddr;
+		addr = (void __user *) fp->un.fmt2.iaddr;
 		break;
 	    case 7:
-		info.si_addr = (void *) fp->un.fmt7.effaddr;
+		addr = (void __user *) fp->un.fmt7.effaddr;
 		break;
 	    case 9:
-		info.si_addr = (void *) fp->un.fmt9.iaddr;
+		addr = (void __user *) fp->un.fmt9.iaddr;
 		break;
 	    case 10:
-		info.si_addr = (void *) fp->un.fmta.daddr;
+		addr = (void __user *) fp->un.fmta.daddr;
 		break;
 	    case 11:
-		info.si_addr = (void *) fp->un.fmtb.daddr;
+		addr = (void __user*) fp->un.fmtb.daddr;
 		break;
 	}
-	force_sig_info (sig, &info, current);
+	force_sig_fault(sig, si_code, addr, current);
 }
 
 void die_if_kernel (char *str, struct pt_regs *fp, int nr)
@@ -1161,12 +1159,6 @@ asmlinkage void fpsp040_die(void)
 #ifdef CONFIG_M68KFPU_EMU
 asmlinkage void fpemu_signal(int signal, int code, void *addr)
 {
-	siginfo_t info;
-
-	info.si_signo = signal;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = addr;
-	force_sig_info(signal, &info, current);
+	force_sig_fault(signal, code, addr, current);
 }
 #endif