m68k: merge m68k and m68knommu arch directories

There is a lot of common code that could be shared between the m68k
and m68knommu arch branches. It makes sense to merge the two branches
into a single directory structure so that we can more easily share
that common code.

This is a brute force merge, based on a script from Stephen King
<sfking@fdwdc.com>, which was originally written by Arnd Bergmann
<arnd@arndb.de>.

> The script was inspired by the script Sam Ravnborg used to merge the
> includes from m68knommu. For those files common to both arches but
> differing in content, the m68k version of the file is renamed to
> <file>_mm.<ext> and the m68knommu version of the file is moved into the
> corresponding m68k directory and renamed <file>_no.<ext> and a small
> wrapper file <file>.<ext> is used to select between the two version. Files
> that are common to both but don't differ are removed from the m68knommu
> tree and files and directories that are unique to the m68knommu tree are
> moved to the m68k tree. Finally, the arch/m68knommu tree is removed.
>
> To select between the the versions of the files, the wrapper uses
>
> #ifdef CONFIG_MMU
> #include <file>_mm.<ext>
> #else
> #include <file>_no.<ext>
> #endif

On top of this file merge I have done a simplistic merge of m68k and
m68knommu Kconfig, which primarily attempts to keep existing options and
menus in place. Other than a handful of options being moved it produces
identical .config outputs on m68k and m68knommu targets I tested it on.

With this in place there is now quite a bit of scope for merge cleanups
in future patches.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 33 insertions, 423 deletions

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 525174d41679..6e056d3c5d01 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -1,13 +1,11 @@
 config M68K
 	bool
 	default y
-	select HAVE_AOUT
 	select HAVE_IDE
-	select GENERIC_ATOMIC64
-
-config MMU
-	bool
-	default y
+	select HAVE_AOUT if MMU
+	select GENERIC_ATOMIC64 if MMU
+	select HAVE_GENERIC_HARDIRQS if !MMU
+	select GENERIC_HARDIRQS_NO_DEPRECATED if !MMU
 
 config RWSEM_GENERIC_SPINLOCK
 	bool
@@ -34,457 +32,67 @@ config TIME_LOW_RES
 	bool
 	default y
 
-config GENERIC_IOMAP
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	depends on BROKEN && (Q40 || SUN3X)
-	default y
-
 config NO_IOPORT
 	def_bool y
 
 config NO_DMA
-	def_bool SUN3
+	def_bool (MMU && SUN3) || (!MMU && !COLDFIRE)
 
+config ZONE_DMA
+	bool
+	default y
 config HZ
 	int
+	default 1000 if CLEOPATRA
 	default 100
 
-config ARCH_USES_GETTIMEOFFSET
-	def_bool y
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
 
-menu "Platform dependent setup"
-
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
-config MCA
-	bool
-	help
-	  MicroChannel Architecture is found in some IBM PS/2 machines and
-	  laptops.  It is a bus system similar to PCI or ISA. See
-	  <file:Documentation/mca.txt> (and especially the web page given
-	  there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
-	tristate
-	---help---
-	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-	  computer.  These are credit-card size devices such as network cards,
-	  modems or hard drives often used with laptops computers.  There are
-	  actually two varieties of these cards: the older 16 bit PCMCIA cards
-	  and the newer 32 bit CardBus cards.  If you want to use CardBus
-	  cards, you need to say Y here and also to "CardBus support" below.
-
-	  To use your PC-cards, you will need supporting software from David
-	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-	  for location).  Please also read the PCMCIA-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as modules, choose M here: the
-	  modules will be called pcmcia_core and ds.
-
-config AMIGA
-	bool "Amiga support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Amiga series of computers. If
-	  you plan to use this kernel on an Amiga, say Y here and browse the
-	  material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
-	bool "Atari support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the 68000-based Atari series of
-	  computers (including the TT, Falcon and Medusa). If you plan to use
-	  this kernel on an Atari, say Y here and browse the material
-	  available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
-	bool "Macintosh support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the Apple Macintosh series of
-	  computers (yes, there is experimental support now, at least for part
-	  of the series).
-
-	  Say N unless you're willing to code the remaining necessary support.
-	  ;)
-
-config NUBUS
-	bool
-	depends on MAC
-	default y
-
-config M68K_L2_CACHE
-	bool
-	depends on MAC
-	default y
-
-config APOLLO
-	bool "Apollo support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to run Linux on an MC680x0-based Apollo
-	  Domain workstation such as the DN3500.
-
-config VME
-	bool "VME (Motorola and BVM) support"
-	select MMU_MOTOROLA if MMU
-	help
-	  Say Y here if you want to build a kernel for a 680x0 based VME
-	  board.  Boards currently supported include Motorola boards MVME147,
-	  MVME162, MVME166, MVME167, MVME172, and MVME177.  BVME4000 and
-	  BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
-	bool "MVME147 support"
-	depends on VME
-	help
-	  Say Y to include support for early Motorola VME boards.  This will
-	  build a kernel which can run on MVME147 single-board computers.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
-	bool "MVME162, 166 and 167 support"
-	depends on VME
-	help
-	  Say Y to include support for Motorola VME boards.  This will build a
-	  kernel which can run on MVME162, MVME166, MVME167, MVME172, and
-	  MVME177 boards.  If you select this option you will have to select
-	  the appropriate drivers for SCSI, Ethernet and serial ports later
-	  on.
-
-config BVME6000
-	bool "BVME4000 and BVME6000 support"
-	depends on VME
-	help
-	  Say Y to include support for VME boards from BVM Ltd.  This will
-	  build a kernel which can run on BVME4000 and BVME6000 boards.  If
-	  you select this option you will have to select the appropriate
-	  drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
-	bool "HP9000/300 and HP9000/400 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  This option enables support for the HP9000/300 and HP9000/400 series
-	  of workstations. Support for these machines is still somewhat
-	  experimental. If you plan to try to use the kernel on such a machine
-	  say Y here.
-	  Everybody else says N.
-
-config DIO
-	bool "DIO bus support"
-	depends on HP300
+config MMU
+	bool "MMU-based Paged Memory Management Support"
 	default y
 	help
-	  Say Y here to enable support for the "DIO" expansion bus used in
-	  HP300 machines. If you are using such a system you almost certainly
-	  want this.
-
-config SUN3X
-	bool "Sun3x support"
-	select MMU_MOTOROLA if MMU
-	select M68030
-	help
-	  This option enables support for the Sun 3x series of workstations.
-	  Be warned that this support is very experimental.
-	  Note that Sun 3x kernels are not compatible with Sun 3 hardware.
-	  General Linux information on the Sun 3x series (now discontinued)
-	  is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
-	  If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
-	bool "Q40/Q60 support"
-	select MMU_MOTOROLA if MMU
-	help
-	  The Q40 is a Motorola 68040-based successor to the Sinclair QL
-	  manufactured in Germany.  There is an official Q40 home page at
-	  <http://www.q40.de/>.  This option enables support for the Q40 and
-	  Q60. Select your CPU below.  For 68LC060 don't forget to enable FPU
-	  emulation.
-
-config SUN3
-	bool "Sun3 support"
-	depends on !MMU_MOTOROLA
-	select MMU_SUN3 if MMU
-	select M68020
-	help
-	  This option enables support for the Sun 3 series of workstations
-	  (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
-	  that all other hardware types must be disabled, as Sun 3 kernels
-	  are incompatible with all other m68k targets (including Sun 3x!).
-
-	  If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
-	bool "ARAnyM emulator support"
-	depends on ATARI
-	help
-	  This option enables support for ARAnyM native features, such as
-	  access to a disk image as /dev/hda.
-
-config NFBLOCK
-	tristate "NatFeat block device support"
-	depends on BLOCK && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat block device
-	  which allows direct access to the hard drives without using
-	  the hardware emulation.
-
-config NFCON
-	tristate "NatFeat console driver"
-	depends on NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat console driver
-	  which allows the console output to be redirected to the stderr
-	  output of ARAnyM.
-
-config NFETH
-	tristate "NatFeat Ethernet support"
-	depends on NET_ETHERNET && NATFEAT
-	help
-	  Say Y to include support for the ARAnyM NatFeat network device
-	  which will emulate a regular ethernet device while presenting an
-	  ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
-	bool "68020 support"
-	help
-	  If you anticipate running this kernel on a computer with a MC68020
-	  processor, say Y. Otherwise, say N. Note that the 68020 requires a
-	  68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
-	  Sun 3, which provides its own version.
-
-config M68030
-	bool "68030 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68030
-	  processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
-	  work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
-	bool "68040 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68LC040
-	  or MC68040 processor, say Y. Otherwise, say N. Note that an
-	  MC68EC040 will not work, as it does not include an MMU (Memory
-	  Management Unit).
-
-config M68060
-	bool "68060 support"
-	depends on !MMU_SUN3
-	help
-	  If you anticipate running this kernel on a computer with a MC68060
-	  processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
-	bool
-
-config MMU_SUN3
-	bool
-	depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
-	bool "Math emulation support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  At some point in the future, this will cause floating-point math
-	  instructions to be emulated by the kernel on machines that lack a
-	  floating-point math coprocessor.  Thrill-seekers and chronically
-	  sleep-deprived psychotic hacker types can say Y now, everyone else
-	  should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
-	bool "Math emulation extra precision"
-	depends on M68KFPU_EMU
-	help
-	  The fpu uses normally a few bit more during calculations for
-	  correct rounding, the emulator can (often) do the same but this
-	  extra calculation can cost quite some time, so you can disable
-	  it here. The emulator will then "only" calculate with a 64 bit
-	  mantissa and round slightly incorrect, what is more than enough
-	  for normal usage.
-
-config M68KFPU_EMU_ONLY
-	bool "Math emulation only kernel"
-	depends on M68KFPU_EMU
-	help
-	  This option prevents any floating-point instructions from being
-	  compiled into the kernel, thereby the kernel doesn't save any
-	  floating point context anymore during task switches, so this
-	  kernel will only be usable on machines without a floating-point
-	  math coprocessor. This makes the kernel a bit faster as no tests
-	  needs to be executed whether a floating-point instruction in the
-	  kernel should be executed or not.
-
-config ADVANCED
-	bool "Advanced configuration options"
-	---help---
-	  This gives you access to some advanced options for the CPU. The
-	  defaults should be fine for most users, but these options may make
-	  it possible for you to improve performance somewhat if you know what
-	  you are doing.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about these options.
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
 
-	  Most users should say N to this question.
-
-config RMW_INSNS
-	bool "Use read-modify-write instructions"
-	depends on ADVANCED
-	---help---
-	  This allows to use certain instructions that work with indivisible
-	  read-modify-write bus cycles. While this is faster than the
-	  workaround of disabling interrupts, it can conflict with DMA
-	  ( = direct memory access) on many Amiga systems, and it is also said
-	  to destabilize other machines. It is very likely that this will
-	  cause serious problems on any Amiga or Atari Medusa if set. The only
-	  configuration where it should work are 68030-based Ataris, where it
-	  apparently improves performance. But you've been warned! Unless you
-	  really know what you are doing, say N. Try Y only if you're quite
-	  adventurous.
-
-config SINGLE_MEMORY_CHUNK
-	bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
-	default y if SUN3
-	select NEED_MULTIPLE_NODES
-	help
-	  Ignore all but the first contiguous chunk of physical memory for VM
-	  purposes.  This will save a few bytes kernel size and may speed up
-	  some operations.  Say N if not sure.
+menu "Platform dependent setup"
 
-config 060_WRITETHROUGH
-	bool "Use write-through caching for 68060 supervisor accesses"
-	depends on ADVANCED && M68060
-	---help---
-	  The 68060 generally uses copyback caching of recently accessed data.
-	  Copyback caching means that memory writes will be held in an on-chip
-	  cache and only written back to memory some time later.  Saying Y
-	  here will force supervisor (kernel) accesses to use writethrough
-	  caching.  Writethrough caching means that data is written to memory
-	  straight away, so that cache and memory data always agree.
-	  Writethrough caching is less efficient, but is needed for some
-	  drivers on 68060 based systems where the 68060 bus snooping signal
-	  is hardwired on.  The 53c710 SCSI driver is known to suffer from
-	  this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
-	def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
-	int
-	default "3"
-	depends on !SINGLE_MEMORY_CHUNK
+if MMU
+source arch/m68k/Kconfig.mmu
+endif
+if !MMU
+source arch/m68k/Kconfig.nommu
+endif
 
 source "mm/Kconfig"
 
 endmenu
 
-menu "General setup"
+menu "Executable file formats"
 
 source "fs/Kconfig.binfmt"
 
-config ZORRO
-	bool "Amiga Zorro (AutoConfig) bus support"
-	depends on AMIGA
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
-	depends on AMIGA && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config STRAM_PROC
-	bool "ST-RAM statistics in /proc"
-	depends on ATARI
-	help
-	  Say Y here to report ST-RAM usage statistics in /proc/stram.
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
-	default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	help
-	  Say Y here to support the /proc/hardware file, which gives you
-	  access to information about the machine you're running on,
-	  including the model, CPU, MMU, clock speed, BogoMIPS rating,
-	  and memory size.
-
-config ISA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
-	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
-	bool
-	depends on Q40 || AMIGA_PCMCIA
-	default y
-
-config ZONE_DMA
-	bool
-	default y
+endmenu
 
-source "drivers/pci/Kconfig"
+if !MMU
+menu "Power management options"
 
-source "drivers/zorro/Kconfig"
+config PM
+        bool "Power Management support"
+        help
+          Support processor power management modes
 
 endmenu
+endif
 
 source "net/Kconfig"
 
 source "drivers/Kconfig"
 
+if MMU
+
 menu "Character devices"
 
 config ATARI_MFPSER
@@ -627,6 +235,8 @@ config SERIAL_CONSOLE
 
 endmenu
 
+endif
+
 source "fs/Kconfig"
 
 source "arch/m68k/Kconfig.debug"