m32r: Move dot.gdbinit files

Move dot.gdbinit files from arch/m32r/{platforms}/dot.gdbinit*
to arch/m32r/platforms/{platform}/.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

3 files changed, 0 insertions, 747 deletions

diff --git a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
deleted file mode 100644
index 525dab46982b..000000000000
--- a/arch/m32r/m32700ut/dot.gdbinit_200MHz_16MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:200:50:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 3
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:16MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x08ffffff (16MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 16MB
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d200000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
deleted file mode 100644
index aa503657a49b..000000000000
--- a/arch/m32r/m32700ut/dot.gdbinit_300MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:300:75:75
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 5
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00051502
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010e24
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d300000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d75000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
deleted file mode 100644
index adc608aab2fe..000000000000
--- a/arch/m32r/m32700ut/dot.gdbinit_400MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:400:100:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 3
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 7
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d400000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-