diff options
author | Graf Yang <graf.yang@analog.com> | 2009-01-07 23:14:39 +0800 |
---|---|---|
committer | Bryan Wu <cooloney@kernel.org> | 2009-01-07 23:14:39 +0800 |
commit | 172e65e778ad500da26d59965750966e1ac7be51 (patch) | |
tree | cebbc5a924d190f69576657b1f5228087a1e7bea /arch/blackfin | |
parent | e32f55d9dbffd2ca16e0bb4ea7156b56741b78cd (diff) | |
download | linux-172e65e778ad500da26d59965750966e1ac7be51.tar.bz2 |
Blackfin arch: remove hardware PM code, oprofile not use it
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Diffstat (limited to 'arch/blackfin')
-rw-r--r-- | arch/blackfin/Kconfig | 6 | ||||
-rw-r--r-- | arch/blackfin/mach-common/interrupt.S | 22 | ||||
-rw-r--r-- | arch/blackfin/mach-common/irqpanic.c | 12 | ||||
-rw-r--r-- | arch/blackfin/oprofile/Makefile | 1 | ||||
-rw-r--r-- | arch/blackfin/oprofile/common.c | 119 | ||||
-rw-r--r-- | arch/blackfin/oprofile/op_blackfin.h | 98 | ||||
-rw-r--r-- | arch/blackfin/oprofile/op_model_bf533.c | 161 | ||||
-rw-r--r-- | arch/blackfin/oprofile/timer_int.c | 73 |
8 files changed, 0 insertions, 492 deletions
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index bbfeecae6403..56ee44d7b2d9 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -1007,12 +1007,6 @@ config EBIU_FCTLVAL hex "Flash Memory Bank Control Register" depends on BF54x default 6 - -config HARDWARE_PM - bool "OProfile use hardware porformance monitor" - depends on OPROFILE=y - default n - endmenu ############################################################################# diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S index c1bdd1edc8eb..473df0f7fa78 100644 --- a/arch/blackfin/mach-common/interrupt.S +++ b/arch/blackfin/mach-common/interrupt.S @@ -165,16 +165,6 @@ ENTRY(_evt_ivhw) r0 = [p2]; [sp + PT_IPEND] = r0; -#ifdef CONFIG_HARDWARE_PM - r7 = [sp + PT_SEQSTAT]; - r7 = r7 >>> 0xe; - r6 = 0x1F; - r7 = r7 & r6; - r5 = 0x12; - cc = r7 == r5; - if cc jump .Lcall_do_ovf; /* deal with performance counter overflow */ -#endif - /* set the EXCAUSE to HWERR for trap_c */ r0 = [sp + PT_SEQSTAT]; R1.L = LO(VEC_HWERR); @@ -200,18 +190,6 @@ ENTRY(_evt_ivhw) .Lcommon_restore_all_sys: RESTORE_ALL_SYS rti; - -#ifdef CONFIG_HARDWARE_PM -.Lcall_do_ovf: - - R0 = SP; - SP += -12; - call _pm_overflow; - SP += 12; - - jump .Lcommon_restore_all_sys; -#endif - ENDPROC(_evt_ivhw) /* Interrupt routine for evt2 (NMI). diff --git a/arch/blackfin/mach-common/irqpanic.c b/arch/blackfin/mach-common/irqpanic.c index 7b69413c1556..05004df0f78b 100644 --- a/arch/blackfin/mach-common/irqpanic.c +++ b/arch/blackfin/mach-common/irqpanic.c @@ -33,8 +33,6 @@ #include <asm/traps.h> #include <asm/blackfin.h> -#include "../oprofile/op_blackfin.h" - #ifdef CONFIG_DEBUG_ICACHE_CHECK #define L1_ICACHE_START 0xffa10000 #define L1_ICACHE_END 0xffa13fff @@ -134,13 +132,3 @@ asmlinkage void irq_panic(int reason, struct pt_regs *regs) #endif } - -#ifdef CONFIG_HARDWARE_PM -/* - * call the handler of Performance overflow - */ -asmlinkage void pm_overflow(struct pt_regs *regs) -{ - pm_overflow_handler(regs); -} -#endif diff --git a/arch/blackfin/oprofile/Makefile b/arch/blackfin/oprofile/Makefile index 634e300d67e2..f11749078b53 100644 --- a/arch/blackfin/oprofile/Makefile +++ b/arch/blackfin/oprofile/Makefile @@ -11,4 +11,3 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ timer_int.o ) oprofile-y := $(DRIVER_OBJS) common.o -oprofile-$(CONFIG_HARDWARE_PM) += op_model_bf533.o diff --git a/arch/blackfin/oprofile/common.c b/arch/blackfin/oprofile/common.c index cf8f48848d1b..beace4fb22e1 100644 --- a/arch/blackfin/oprofile/common.c +++ b/arch/blackfin/oprofile/common.c @@ -30,129 +30,10 @@ #include <linux/oprofile.h> #include <linux/init.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/mutex.h> -#include <linux/ptrace.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/system.h> -#include <asm/blackfin.h> - -#include "op_blackfin.h" - -#define BFIN_533_ID 0xE5040003 -#define BFIN_537_ID 0xE5040002 - -static int pfmon_enabled; -static struct mutex pfmon_lock; - -struct op_bfin533_model *model; - -struct op_counter_config ctr[OP_MAX_COUNTER]; - -static int op_bfin_setup(void) -{ - int ret; - - /* Pre-compute the values to stuff in the hardware registers. */ - spin_lock(&oprofilefs_lock); - ret = model->reg_setup(ctr); - spin_unlock(&oprofilefs_lock); - - return ret; -} - -static void op_bfin_shutdown(void) -{ -#if 0 - /* what is the difference between shutdown and stop? */ -#endif -} - -static int op_bfin_start(void) -{ - int ret = -EBUSY; - - printk(KERN_INFO "KSDBG:in %s\n", __func__); - mutex_lock(&pfmon_lock); - if (!pfmon_enabled) { - ret = model->start(ctr); - pfmon_enabled = !ret; - } - mutex_unlock(&pfmon_lock); - - return ret; -} - -static void op_bfin_stop(void) -{ - mutex_lock(&pfmon_lock); - if (pfmon_enabled) { - model->stop(); - pfmon_enabled = 0; - } - mutex_unlock(&pfmon_lock); -} - -static int op_bfin_create_files(struct super_block *sb, struct dentry *root) -{ - int i; - - for (i = 0; i < model->num_counters; ++i) { - struct dentry *dir; - char buf[3]; - printk(KERN_INFO "Oprofile: creating files... \n"); - - snprintf(buf, sizeof buf, "%d", i); - dir = oprofilefs_mkdir(sb, root, buf); - - oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled); - oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event); - oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count); - /* - * We dont support per counter user/kernel selection, but - * we leave the entries because userspace expects them - */ - oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel); - oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user); - oprofilefs_create_ulong(sb, dir, "unit_mask", - &ctr[i].unit_mask); - } - - return 0; -} int __init oprofile_arch_init(struct oprofile_operations *ops) { -#ifdef CONFIG_HARDWARE_PM - mutex_init(&pfmon_lock); - - - switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { - case 0xca: - printk(KERN_INFO "Oprofile: cpu vendor is Analog Devices.\n"); - model = &op_model_bfin533; - model->num_counters = 2; - break; - default: - return -ENODEV; - } - - ops->cpu_type = model->name; - ops->create_files = op_bfin_create_files; - ops->setup = op_bfin_setup; - ops->shutdown = op_bfin_shutdown; - ops->start = op_bfin_start; - ops->stop = op_bfin_stop; - - printk(KERN_INFO "oprofile: using %s performance monitoring.\n", - ops->cpu_type); - - return 0; -#else return -1; -#endif } void oprofile_arch_exit(void) diff --git a/arch/blackfin/oprofile/op_blackfin.h b/arch/blackfin/oprofile/op_blackfin.h deleted file mode 100644 index 37aec0eb00d0..000000000000 --- a/arch/blackfin/oprofile/op_blackfin.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * File: arch/blackfin/oprofile/op_blackfin.h - * Based on: - * Author: Anton Blanchard <anton@au.ibm.com> - * - * Created: - * Description: - * - * Modified: - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef OP_BLACKFIN_H -#define OP_BLACKFIN_H 1 - -#define OP_MAX_COUNTER 2 - -#include <asm/blackfin.h> - -/* Per-counter configuration as set via oprofilefs. */ -struct op_counter_config { - unsigned long valid; - unsigned long enabled; - unsigned long event; - unsigned long count; - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; -}; - -/* System-wide configuration as set via oprofilefs. */ -struct op_system_config { - unsigned long enable_kernel; - unsigned long enable_user; -}; - -/* Per-arch configuration */ -struct op_bfin533_model { - int (*reg_setup) (struct op_counter_config *); - int (*start) (struct op_counter_config *); - void (*stop) (void); - int num_counters; - char *name; -}; - -extern struct op_bfin533_model op_model_bfin533; - -static inline unsigned int ctr_read(void) -{ - unsigned int tmp; - - tmp = bfin_read_PFCTL(); - CSYNC(); - - return tmp; -} - -static inline void ctr_write(unsigned int val) -{ - bfin_write_PFCTL(val); - CSYNC(); -} - -static inline void count_read(unsigned int *count) -{ - count[0] = bfin_read_PFCNTR0(); - count[1] = bfin_read_PFCNTR1(); - CSYNC(); -} - -static inline void count_write(unsigned int *count) -{ - bfin_write_PFCNTR0(count[0]); - bfin_write_PFCNTR1(count[1]); - CSYNC(); -} - -extern int pm_overflow_handler(struct pt_regs *regs); - -#endif diff --git a/arch/blackfin/oprofile/op_model_bf533.c b/arch/blackfin/oprofile/op_model_bf533.c deleted file mode 100644 index 0e34df169b2d..000000000000 --- a/arch/blackfin/oprofile/op_model_bf533.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * File: arch/blackfin/oprofile/op_model_bf533.c - * Based on: - * Author: Anton Blanchard <anton@au.ibm.com> - * - * Created: - * Description: - * - * Modified: - * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/oprofile.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/blackfin.h> - -#include "op_blackfin.h" - -#define PM_ENABLE 0x01; -#define PM_CTL1_ENABLE 0x18 -#define PM_CTL0_ENABLE 0xC000 -#define COUNT_EDGE_ONLY 0x3000000 - -static int oprofile_running; - -static unsigned curr_pfctl, curr_count[2]; - -static int bfin533_reg_setup(struct op_counter_config *ctr) -{ - unsigned int pfctl = 0; - unsigned int count[2]; - - /* set Blackfin perf monitor regs with ctr */ - if (ctr[0].enabled) { - pfctl |= (PM_CTL0_ENABLE | ((char)ctr[0].event << 5)); - count[0] = 0xFFFFFFFF - ctr[0].count; - curr_count[0] = count[0]; - } - if (ctr[1].enabled) { - pfctl |= (PM_CTL1_ENABLE | ((char)ctr[1].event << 16)); - count[1] = 0xFFFFFFFF - ctr[1].count; - curr_count[1] = count[1]; - } - - pr_debug("ctr[0].enabled=%d,ctr[1].enabled=%d,ctr[0].event<<5=0x%x,ctr[1].event<<16=0x%x\n", ctr[0].enabled, ctr[1].enabled, ctr[0].event << 5, ctr[1].event << 16); - pfctl |= COUNT_EDGE_ONLY; - curr_pfctl = pfctl; - - pr_debug("write 0x%x to pfctl\n", pfctl); - ctr_write(pfctl); - count_write(count); - - return 0; -} - -static int bfin533_start(struct op_counter_config *ctr) -{ - unsigned int pfctl = ctr_read(); - - pfctl |= PM_ENABLE; - curr_pfctl = pfctl; - - ctr_write(pfctl); - - oprofile_running = 1; - pr_debug("start oprofile counter \n"); - - return 0; -} - -static void bfin533_stop(void) -{ - int pfctl; - - pfctl = ctr_read(); - pfctl &= ~PM_ENABLE; - /* freeze counters */ - ctr_write(pfctl); - - oprofile_running = 0; - pr_debug("stop oprofile counter \n"); -} - -static int get_kernel(void) -{ - int ipend, is_kernel; - - ipend = bfin_read_IPEND(); - - /* test bit 15 */ - is_kernel = ((ipend & 0x8000) != 0); - - return is_kernel; -} - -int pm_overflow_handler(struct pt_regs *regs) -{ - int is_kernel; - int i, cpu; - unsigned int pc, pfctl; - unsigned int count[2]; - - pr_debug("get interrupt in %s\n", __func__); - if (oprofile_running == 0) { - pr_debug("error: entering interrupt when oprofile is stopped.\n\r"); - return -1; - } - - is_kernel = get_kernel(); - cpu = smp_processor_id(); - pc = regs->pc; - pfctl = ctr_read(); - - /* read the two event counter regs */ - count_read(count); - - /* if the counter overflows, add sample to oprofile buffer */ - for (i = 0; i < 2; ++i) { - if (oprofile_running) { - oprofile_add_sample(regs, i); - } - } - - /* reset the perfmon counter */ - ctr_write(curr_pfctl); - count_write(curr_count); - return 0; -} - -struct op_bfin533_model op_model_bfin533 = { - .reg_setup = bfin533_reg_setup, - .start = bfin533_start, - .stop = bfin533_stop, - .num_counters = 2, - .name = "blackfin/bf533" -}; diff --git a/arch/blackfin/oprofile/timer_int.c b/arch/blackfin/oprofile/timer_int.c deleted file mode 100644 index 6c6f8606af4c..000000000000 --- a/arch/blackfin/oprofile/timer_int.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * File: arch/blackfin/oprofile/timer_int.c - * Based on: - * Author: Michael Kang - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/irq.h> -#include <linux/oprofile.h> -#include <linux/ptrace.h> - -static void enable_sys_timer0() -{ -} -static void disable_sys_timer0() -{ -} - -static irqreturn_t sys_timer0_int_handler(int irq, void *dev_id, - struct pt_regs *regs) -{ - oprofile_add_sample(regs, 0); - return IRQ_HANDLED; -} - -static int sys_timer0_start(void) -{ - enable_sys_timer0(); - return request_irq(IVG11, sys_timer0_int_handler, 0, "sys_timer0", NULL); -} - -static void sys_timer0_stop(void) -{ - disable_sys_timer(); -} - -int __init sys_timer0_init(struct oprofile_operations *ops) -{ - extern int nmi_active; - - if (nmi_active <= 0) - return -ENODEV; - - ops->start = timer_start; - ops->stop = timer_stop; - ops->cpu_type = "timer"; - printk(KERN_INFO "oprofile: using NMI timer interrupt.\n"); - return 0; -} |