summaryrefslogtreecommitdiffstats
path: root/arch/blackfin
diff options
context:
space:
mode:
authorSonic Zhang <sonic.zhang@analog.com>2010-11-23 10:00:15 +0000
committerMike Frysinger <vapier@gentoo.org>2011-01-10 07:18:24 -0500
commitd57bc0feaa958bc8a6a0b9d3a29f78c699e50d2a (patch)
tree87ce0faa31576525306124139865c14488b6d7b0 /arch/blackfin
parent874f6cfd3a05d5452064531078cae9b19a5e790c (diff)
downloadlinux-d57bc0feaa958bc8a6a0b9d3a29f78c699e50d2a.tar.bz2
Blackfin: bf518f-ezbrd: fix dsa resources
On bf518-ezbrd with DSA Ethernet switch enabled, on chip MAC is connecting to phy at address 3. If allowing the netdevice framework to probe both 3 phys of the switch when registering MAC phy, phy at address 1 is checked for link active status other than phy at address 3. If connecting a cable to port 2 and leave port 1 open, link status in phy 2 and 3 are online, while that in phy 1 is offline. So, the phy layer sets wrong offline status to net device on port 3. In this case, no data can be transferred via ethernet port 2. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Diffstat (limited to 'arch/blackfin')
-rw-r--r--arch/blackfin/mach-bf518/boards/ezbrd.c17
1 files changed, 8 insertions, 9 deletions
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0c75aa35faf4..8d55a8dad7ab 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -104,24 +104,23 @@ static const unsigned short bfin_mac_peripherals[] = {
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
{
- .addr = 1,
- .irq = IRQ_MAC_PHYINT,
- },
- {
- .addr = 2,
- .irq = IRQ_MAC_PHYINT,
- },
- {
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
.addr = 3,
+#else
+ .addr = 1,
+#endif
.irq = IRQ_MAC_PHYINT,
},
};
static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
- .phydev_number = 3,
+ .phydev_number = 1,
.phydev_data = bfin_phydev_data,
.phy_mode = PHY_INTERFACE_MODE_MII,
.mac_peripherals = bfin_mac_peripherals,
+#if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
+ .phy_mask = 0xfff7, /* Only probe the port phy connect to the on chip MAC */
+#endif
};
static struct platform_device bfin_mii_bus = {