summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2008-10-13 10:08:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2008-10-13 10:08:43 -0700
commit54cebc68c81eacac41a21bdfe99dc889d3882c60 (patch)
treeda1d3872c6ddf208768e784bd1ea09054a81462d /arch/blackfin/mach-bf533
parentfffdedef691a0f6fa7ca1fc0a2a508cbb49def69 (diff)
parent71de1f8a6365ea65346881e526132563d93696d1 (diff)
downloadlinux-54cebc68c81eacac41a21bdfe99dc889d3882c60.tar.bz2
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (60 commits) Blackfin arch: make sure we include the fix for SPORT hysteresis when reprogramming clocks Blackfin arch: Fix bogus str_ident check in gpio code Blackfin arch: AD7879 Touchscreen driver Blackfin arch: introducing bfin_addr_dcachable Blackfin arch: fix a typo in comments Blackfin arch: Remove useless head file Blackfin arch: make sure L2 start and length are always defined (fixes building on BF542) Blackfin arch: use the Blackfin on-chip ROM to do software reset when possible Blackfin arch: update anomaly headers to match the latest sheet Blackfin arch: bfin_reset() is an internal reboot function ... everyone should go through machine_restart() Blackfin arch: print out error/warning if you are running on the incorrect CPU type Blackfin arch: remove non-bf54x ifdef logic since this file is only compiled on bf54x parts Blackfin arch: update board defconfigs Blackfin arch: Add optional verbose debug Blackfin arch: emulate a TTY over the EMUDAT/JTAG interface Blackfin arch: have is_user_addr_valid() check for overflows (like when address is -1) Blackfin arch: ptrace - fix off-by-one check on end of memory regions Blackfin arch: Enable framebuffer support for the BF526-EZkit TFT LCD display Blackfin arch: flash memory map and dm9000 resources updating Blackfin arch: early prink code still use uart core console functions to parse and set configure option string ...
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c34
-rw-r--r--arch/blackfin/mach-bf533/head.S3
-rw-r--r--arch/blackfin/mach-bf533/include/mach/anomaly.h49
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bf533.h12
-rw-r--r--arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h2
5 files changed, 55 insertions, 45 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index c66a68f30239..72ac3ac8ef76 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -9,7 +9,7 @@
* Modified:
* Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2006 Analog Devices Inc
- * Copyright 2007 HV Sistemas S.L.
+ * Copyright 2007,2008 HV Sistemas S.L.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -64,18 +64,18 @@ static struct platform_device rtc_device = {
static struct resource dm9000_resources[] = {
[0] = {
.start = 0x20300000,
- .end = 0x20300000 + 1,
+ .end = 0x20300002,
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 0x20300000 + 4,
- .end = 0x20300000 + 5,
+ .start = 0x20300004,
+ .end = 0x20300006,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_PF10,
.end = IRQ_PF10,
- .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
},
};
@@ -140,18 +140,22 @@ static struct platform_device net2272_bfin_device = {
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader(spi)",
- .size = 0x00060000,
+ .name = "bootloader (spi)",
+ .size = 0x40000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel(spi)",
- .size = 0x100000,
- .offset = 0x60000
+ .name = "fpga (spi)",
+ .size = 0x30000,
+ .offset = 0x40000
}, {
- .name = "file system(spi)",
- .size = 0x6a0000,
- .offset = 0x00160000,
+ .name = "linux kernel (spi)",
+ .size = 0x150000,
+ .offset = 0x70000
+ }, {
+ .name = "jffs2 root file system (spi)",
+ .size = 0x640000,
+ .offset = 0x1c0000,
}
};
@@ -340,7 +344,7 @@ static struct platform_device bfin_sir_device = {
static struct plat_serial8250_port serial8250_platform_data [] = {
{
- .membase = 0x20200000,
+ .membase = (void *)0x20200000,
.mapbase = 0x20200000,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
@@ -348,7 +352,7 @@ static struct plat_serial8250_port serial8250_platform_data [] = {
.regshift = 1,
.uartclk = 66666667,
}, {
- .membase = 0x20200010,
+ .membase = (void *)0x20200010,
.mapbase = 0x20200010,
.irq = IRQ_PF8,
.flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 01b2b7ead5ab..619685b94d90 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -78,6 +78,9 @@ ENTRY(_start_dma_code)
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ r0 = BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 8f7ea112fd3a..f544fc56959a 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -7,7 +7,7 @@
*/
/* This file shoule be up to date with:
- * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
+ * - Revision D, 06/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List
*/
#ifndef _MACH_ANOMALY_H_
@@ -97,11 +97,11 @@
/* UART STB Bit Incorrectly Affects Receiver Setting */
#define ANOMALY_05000231 (__SILICON_REVISION__ < 5)
/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */
-#define ANOMALY_05000233 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000233 (__SILICON_REVISION__ < 6)
/* Incorrect Revision Number in DSPID Register */
#define ANOMALY_05000234 (__SILICON_REVISION__ == 4)
/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */
-#define ANOMALY_05000242 (__SILICON_REVISION__ < 4)
+#define ANOMALY_05000242 (__SILICON_REVISION__ < 5)
/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */
#define ANOMALY_05000244 (__SILICON_REVISION__ < 5)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
@@ -131,7 +131,7 @@
/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */
#define ANOMALY_05000264 (__SILICON_REVISION__ < 5)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
-#define ANOMALY_05000265 (__SILICON_REVISION__ < 5)
+#define ANOMALY_05000265 (1)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */
#define ANOMALY_05000269 (__SILICON_REVISION__ < 5)
/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */
@@ -141,56 +141,59 @@
/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
#define ANOMALY_05000272 (1)
/* Writes to Synchronous SDRAM Memory May Be Lost */
-#define ANOMALY_05000273 (1)
+#define ANOMALY_05000273 (__SILICON_REVISION__ < 6)
/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */
#define ANOMALY_05000276 (1)
/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */
-#define ANOMALY_05000277 (1)
+#define ANOMALY_05000277 (__SILICON_REVISION__ < 6)
/* Disabling Peripherals with DMA Running May Cause DMA System Instability */
-#define ANOMALY_05000278 (1)
+#define ANOMALY_05000278 (__SILICON_REVISION__ < 6)
/* False Hardware Error Exception When ISR Context Is Not Restored */
-#define ANOMALY_05000281 (1)
+#define ANOMALY_05000281 (__SILICON_REVISION__ < 6)
/* Memory DMA Corruption with 32-Bit Data and Traffic Control */
-#define ANOMALY_05000282 (1)
+#define ANOMALY_05000282 (__SILICON_REVISION__ < 6)
/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */
-#define ANOMALY_05000283 (1)
+#define ANOMALY_05000283 (__SILICON_REVISION__ < 6)
/* SPORTs May Receive Bad Data If FIFOs Fill Up */
-#define ANOMALY_05000288 (1)
+#define ANOMALY_05000288 (__SILICON_REVISION__ < 6)
/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */
-#define ANOMALY_05000301 (1)
+#define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
#define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
#define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
#define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
+/* SCKELOW Bit Does Not Maintain State Through Hibernate */
+#define ANOMALY_05000307 (1)
/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
#define ANOMALY_05000310 (1)
/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */
-#define ANOMALY_05000311 (1)
+#define ANOMALY_05000311 (__SILICON_REVISION__ < 6)
/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
-#define ANOMALY_05000312 (1)
+#define ANOMALY_05000312 (__SILICON_REVISION__ < 6)
/* PPI Is Level-Sensitive on First Transfer */
-#define ANOMALY_05000313 (1)
+#define ANOMALY_05000313 (__SILICON_REVISION__ < 6)
/* Killed System MMR Write Completes Erroneously On Next System MMR Access */
-#define ANOMALY_05000315 (1)
+#define ANOMALY_05000315 (__SILICON_REVISION__ < 6)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
-#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+#define ANOMALY_05000319 ((ANOMALY_BF531 || ANOMALY_BF532) && __SILICON_REVISION__ < 6)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
+#define ANOMALY_05000357 (__SILICON_REVISION__ < 6)
/* UART Break Signal Issues */
#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
#define ANOMALY_05000366 (1)
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
+#define ANOMALY_05000371 (__SILICON_REVISION__ < 6)
/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
+/* Speculative Fetches Can Cause Undesired External FIFO Operations */
+#define ANOMALY_05000416 (1)
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
@@ -268,5 +271,7 @@
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
#define ANOMALY_05000323 (0)
+#define ANOMALY_05000353 (1)
+#define ANOMALY_05000386 (1)
#endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
index 12a416931991..dfc8c1ad2d7a 100644
--- a/arch/blackfin/mach-bf533/include/mach/bf533.h
+++ b/arch/blackfin/mach-bf533/include/mach/bf533.h
@@ -30,8 +30,6 @@
#ifndef __MACH_BF533_H__
#define __MACH_BF533_H__
-#define SUPPORTED_REVID 2
-
#define OFFSET_(x) ((x) & 0x0000FFFF)
/*some misc defines*/
@@ -143,19 +141,19 @@
#ifdef CONFIG_BF533
#define CPU "BF533"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
#endif
#ifdef CONFIG_BF532
#define CPU "BF532"
-#define CPUID 0x0275A000
+#define CPUID 0x275A
#endif
#ifdef CONFIG_BF531
#define CPU "BF531"
-#define CPUID 0x027a5000
+#define CPUID 0x27a5
#endif
+
#ifndef CPU
-#define CPU "UNKNOWN"
-#define CPUID 0x0
+#error Unknown CPU type - This kernel doesn't seem to be configured properly
#endif
#endif /* __MACH_BF533_H__ */
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index 815bfe5dd1a9..34ab0e4e4242 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -85,7 +85,7 @@ struct bfin_serial_port {
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
-# if ANOMALY_05000230
+# if ANOMALY_05000363
unsigned int anomaly_threshold;
# endif
#endif