diff options
author | Sonic Zhang <sonic.zhang@analog.com> | 2009-04-07 16:52:26 +0100 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-04-07 08:44:05 -0700 |
commit | d307d36adeaa70074773b3e5eab8d7e1beb008a4 (patch) | |
tree | 2a51257927be7c1a99ffb38b4752e0a4b56edc2a /arch/blackfin/mach-bf533 | |
parent | 6f95570e407d03c5140a220e054f9b18abdc7041 (diff) | |
download | linux-d307d36adeaa70074773b3e5eab8d7e1beb008a4.tar.bz2 |
tty: Blackin CTS/RTS
Both software emulated and hardware based CTS and RTS are enabled in
serial driver.
The CTS RTS PIN connection on BF548 UART port is defined as a modem
device not as a host device. In order to test it under Linux, please
nake a cross UART cable to exchange CTS and RTS signal.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r-- | arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h | 9 |
1 files changed, 6 insertions, 3 deletions
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h index 70356ddf8509..a3789d7ccf8c 100644 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h @@ -53,9 +53,9 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin)) +#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) @@ -74,6 +74,7 @@ struct bfin_serial_port { struct uart_port port; unsigned int old_status; + int status_irq; unsigned int lsr; #ifdef CONFIG_SERIAL_BFIN_DMA int tx_done; @@ -116,6 +117,7 @@ static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) struct bfin_serial_res { unsigned long uart_base_addr; int uart_irq; + int uart_status_irq; #ifdef CONFIG_SERIAL_BFIN_DMA unsigned int uart_tx_dma_channel; unsigned int uart_rx_dma_channel; @@ -130,6 +132,7 @@ struct bfin_serial_res bfin_serial_resource[] = { { 0xFFC00400, IRQ_UART_RX, + IRQ_UART_ERROR, #ifdef CONFIG_SERIAL_BFIN_DMA CH_UART_TX, CH_UART_RX, |