Merge branch 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into next/dt

* 'for-arm-soc-next' of git://git.linaro.org/people/ljones/linux-3.0-ux500:
  ARM: ux500: Fix SSP register address format
  ARM: ux500: Apply tc3589x's GPIO/IRQ properties to HREF's DT
  ARM: ux500: Remove redundant #gpio-cell properties from Snowball DT
  ARM: ux500: Add all encompassing sound node to the HREF Device Tree
  ARM: ux500: Add nodes for the MSP into the HREF Device Tree
  ARM: ux500: Add all known I2C sub-device nodes to the HREF DT
  ARM: ux500: Stop registering I2C sub-devices for HREF when DT is enabled
  ARM: ux500: Stop registering Audio devices for HREF when DT is enabled
  ARM: ux500: Add all encompassing sound node to the Snowball Device Tree
  ARM: ux500: Add nodes for the MSP into Device Tree
  ARM: ux500: Rename MSP board file to something more meaningful
  ARM: ux500: Remove platform registration of MSP devices
  ARM: ux500: Stop registering the MOP500 Audio driver from platform code
  ARM: ux500: Pass MSP DMA platform data though AUXDATA
  ARM: ux500: Fork MSP platform registration for step-by-step DT enablement
  ARM: ux500: Add AB8500 CODEC node to DB8500 Device Tree
  ARM: ux500: Clean-up MSP platform code
  ARM: ux500: Pass SDI DMA information though AUX_DATA to MMCI
  ARM: ux500: Add UART support to the HREF Device Tree
  ARM: ux500: Add skeleton Device Tree for the HREF reference board
  ...
  + sync to v3.6-rc6

40 files changed, 475 insertions, 234 deletions

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index f15f82bf3a50..e968a52e4881 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 30eae87ead6d..a051dfbdd7db 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index b8c64b80bafc..81769c1341fa 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -659,10 +659,14 @@ __armv7_mmu_cache_on:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 3180a9c588b9..748ba7aa746c 100644
--- a/arch/arm/boot/dts/db8500.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -194,6 +194,8 @@
 			interrupts = <0 47 0x4>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 			ranges;
 
 			prcmu-timer-4@80157450 {
@@ -330,6 +332,7 @@
 			ab8500@5 {
 				compatible = "stericsson,ab8500";
 				reg = <5>; /* mailbox 5 is i2c */
+				interrupt-parent = <&intc>;
 				interrupts = <0 40 0x4>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -371,7 +374,7 @@
 				};
 
 				ab8500-ponkey {
-					compatible = "stericsson,ab8500-ponkey";
+					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 0x4
 						      7 0x4>;
 					interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
@@ -389,6 +392,12 @@
 					compatible = "stericsson,ab8500-debug";
 				};
 
+				codec: ab8500-codec {
+					compatible = "stericsson,ab8500-codec";
+
+					stericsson,earpeice-cmv = <950>; /* Units in mV. */
+				};
+
 				ab8500-regulators {
 					compatible = "stericsson,ab8500-regulator";
 
@@ -471,48 +480,63 @@
 		};
 
 		i2c@80004000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80004000 0x1000>;
 			interrupts = <0 21 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80122000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80122000 0x1000>;
 			interrupts = <0 22 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80128000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80128000 0x1000>;
 			interrupts = <0 55 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@80110000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x80110000 0x1000>;
 			interrupts = <0 12 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		i2c@8012a000 {
-			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+			compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
 			reg = <0x8012a000 0x1000>;
 			interrupts = <0 51 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			v-i2c-supply = <&db8500_vape_reg>;
+
+			clock-frequency = <400000>;
 		};
 
 		ssp@80002000 {
 			compatible = "arm,pl022", "arm,primecell";
-			reg = <80002000 0x1000>;
+			reg = <0x80002000 0x1000>;
 			interrupts = <0 14 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -580,6 +604,39 @@
 			status = "disabled";
 		};
 
+		msp0: msp@80123000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80123000 0x1000>;
+			interrupts = <0 31 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp1: msp@80124000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80124000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		// HDMI sound
+		msp2: msp@80117000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80117000 0x1000>;
+			interrupts = <0 98 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
+		msp3: msp@80125000 {
+			compatible = "stericsson,ux500-msp-i2s";
+			reg = <0x80125000 0x1000>;
+			interrupts = <0 62 0x4>;
+			v-ape-supply = <&db8500_vape_reg>;
+			status = "disabled";
+		};
+
 		external-bus@50000000 {
 			compatible = "simple-bus";
 			reg = <0x50000000 0x4000000>;
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
new file mode 100644
index 000000000000..2131d77dc9c9
--- /dev/null
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 7e334d4cae21..702c0baa6004 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -10,7 +10,7 @@
  */
 
 /dts-v1/;
-/include/ "db8500.dtsi"
+/include/ "dbx5x0.dtsi"
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
@@ -83,6 +83,22 @@
 	};
 
 	soc-u9500 {
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
 		external-bus@50000000 {
 			status = "okay";
 
@@ -111,7 +127,6 @@
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
-			#gpio-cells = <1>;
 			cd-gpios  = <&gpio6 26 0x4>; // 218
 			cd-inverted;
 
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 03fb93621d0d..5c8b3bf4d825 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index e965f1b560f1..5f6ddcc56452 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 314d4664eae7..99a19512ee26 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
@@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 479a6352e0b5..77bd79f2ffdb 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -101,28 +101,39 @@ extern int __get_user_1(void *);
 extern int __get_user_2(void *);
 extern int __get_user_4(void *);
 
-#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+#define __GUP_CLOBBER_1	"lr", "cc"
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define __GUP_CLOBBER_2	"ip", "lr", "cc"
+#else
+#define __GUP_CLOBBER_2 "lr", "cc"
+#endif
+#define __GUP_CLOBBER_4	"lr", "cc"
+
+#define __get_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__get_user_" #__s				\
 		: "=&r" (__e), "=r" (__r2)				\
-		: "0" (__p)						\
-		: __i, "cc")
+		: "0" (__p), "r" (__l)					\
+		: __GUP_CLOBBER_##__s)
 
-#define get_user(x,p)							\
+#define __get_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
 		register unsigned long __r2 asm("r2");			\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__get_user_x(__r2, __p, __e, 1, "lr");		\
-	       		break;						\
+			__get_user_x(__r2, __p, __e, __l, 1);		\
+			break;						\
 		case 2:							\
-			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			__get_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			__get_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
@@ -130,42 +141,57 @@ extern int __get_user_4(void *);
 		__e;							\
 	})
 
+#define get_user(x,p)							\
+	({								\
+		might_fault();						\
+		__get_user_check(x,p);					\
+	 })
+
 extern int __put_user_1(void *, unsigned int);
 extern int __put_user_2(void *, unsigned int);
 extern int __put_user_4(void *, unsigned int);
 extern int __put_user_8(void *, unsigned long long);
 
-#define __put_user_x(__r2,__p,__e,__s)					\
+#define __put_user_x(__r2,__p,__e,__l,__s)				\
 	   __asm__ __volatile__ (					\
 		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		__asmeq("%3", "r1")					\
 		"bl	__put_user_" #__s				\
 		: "=&r" (__e)						\
-		: "0" (__p), "r" (__r2)					\
+		: "0" (__p), "r" (__r2), "r" (__l)			\
 		: "ip", "lr", "cc")
 
-#define put_user(x,p)							\
+#define __put_user_check(x,p)							\
 	({								\
+		unsigned long __limit = current_thread_info()->addr_limit - 1; \
 		register const typeof(*(p)) __r2 asm("r2") = (x);	\
 		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
-			__put_user_x(__r2, __p, __e, 1);		\
+			__put_user_x(__r2, __p, __e, __l, 1);		\
 			break;						\
 		case 2:							\
-			__put_user_x(__r2, __p, __e, 2);		\
+			__put_user_x(__r2, __p, __e, __l, 2);		\
 			break;						\
 		case 4:							\
-			__put_user_x(__r2, __p, __e, 4);		\
+			__put_user_x(__r2, __p, __e, __l, 4);		\
 			break;						\
 		case 8:							\
-			__put_user_x(__r2, __p, __e, 8);		\
+			__put_user_x(__r2, __p, __e, __l, 8);		\
 			break;						\
 		default: __e = __put_user_bad(); break;			\
 		}							\
 		__e;							\
 	})
 
+#define put_user(x,p)							\
+	({								\
+		might_fault();						\
+		__put_user_check(x,p);					\
+	 })
+
 #else /* CONFIG_MMU */
 
 /*
@@ -219,6 +245,7 @@ do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
 	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
@@ -300,6 +327,7 @@ do {									\
 	unsigned long __pu_addr = (unsigned long)(ptr);			\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	__chk_user_ptr(ptr);						\
+	might_fault();							\
 	switch (sizeof(*(ptr))) {					\
 	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
 	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index ba386bd94107..281bf3301241 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -159,6 +159,12 @@ static int debug_arch_supported(void)
 		arch >= ARM_DEBUG_ARCH_V7_1;
 }
 
+/* Can we determine the watchpoint access type from the fsr? */
+static int debug_exception_updates_fsr(void)
+{
+	return 0;
+}
+
 /* Determine number of WRP registers available. */
 static int get_num_wrp_resources(void)
 {
@@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 		/* Aligned */
 		break;
 	case 1:
-		/* Allow single byte watchpoint. */
-		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
-			break;
 	case 2:
 		/* Allow halfword watchpoints and breakpoints. */
 		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
 			break;
+	case 3:
+		/* Allow single byte watchpoint. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+			break;
 	default:
 		ret = -EINVAL;
 		goto out;
@@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	info->address &= ~alignment_mask;
 	info->ctrl.len <<= offset;
 
-	/*
-	 * Currently we rely on an overflow handler to take
-	 * care of single-stepping the breakpoint when it fires.
-	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware
-	 * single-step, but this only works for per-task breakpoints.
-	 */
-	if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
-	    !core_has_mismatch_brps() || !bp->hw.bp_target)) {
-		pr_warning("overflow handler required but none found\n");
-		ret = -EINVAL;
+	if (!bp->overflow_handler) {
+		/*
+		 * Mismatch breakpoints are required for single-stepping
+		 * breakpoints.
+		 */
+		if (!core_has_mismatch_brps())
+			return -EINVAL;
+
+		/* We don't allow mismatch breakpoints in kernel space. */
+		if (arch_check_bp_in_kernelspace(bp))
+			return -EPERM;
+
+		/*
+		 * Per-cpu breakpoints are not supported by our stepping
+		 * mechanism.
+		 */
+		if (!bp->hw.bp_target)
+			return -EINVAL;
+
+		/*
+		 * We only support specific access types if the fsr
+		 * reports them.
+		 */
+		if (!debug_exception_updates_fsr() &&
+		    (info->ctrl.type == ARM_BREAKPOINT_LOAD ||
+		     info->ctrl.type == ARM_BREAKPOINT_STORE))
+			return -EINVAL;
 	}
+
 out:
 	return ret;
 }
@@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 				goto unlock;
 
 			/* Check that the access type matches. */
-			access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
-				 HW_BREAKPOINT_R;
-			if (!(access & hw_breakpoint_type(wp)))
-				goto unlock;
+			if (debug_exception_updates_fsr()) {
+				access = (fsr & ARM_FSR_ACCESS_MASK) ?
+					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
+				if (!(access & hw_breakpoint_type(wp)))
+					goto unlock;
+			}
 
 			/* We have a winner. */
 			info->trigger = addr;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f7945218b8c6..b0179b89a04c 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 #endif
 			instr = *(u32 *) pc;
 	} else if (thumb_mode(regs)) {
-		get_user(instr, (u16 __user *)pc);
+		if (get_user(instr, (u16 __user *)pc))
+			goto die_sig;
 		if (is_wide_instruction(instr)) {
 			unsigned int instr2;
-			get_user(instr2, (u16 __user *)pc+1);
+			if (get_user(instr2, (u16 __user *)pc+1))
+				goto die_sig;
 			instr <<= 16;
 			instr |= instr2;
 		}
-	} else {
-		get_user(instr, (u32 __user *)pc);
+	} else if (get_user(instr, (u32 __user *)pc)) {
+		goto die_sig;
 	}
 
 	if (call_undef_hook(regs, instr) == 0)
 		return;
 
+die_sig:
 #ifdef CONFIG_DEBUG_USER
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index d6dacc69254e..395d5fbb8fa2 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq)
 {
 	pr_info("Switching to timer-based delay loop\n");
 	lpj_fine			= freq / HZ;
+	loops_per_jiffy			= lpj_fine;
 	arm_delay_ops.delay		= __timer_delay;
 	arm_delay_ops.const_udelay	= __timer_const_udelay;
 	arm_delay_ops.udelay		= __timer_udelay;
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 11093a7c3e32..9b06bb41fca6 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -16,8 +16,9 @@
  * __get_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  * Outputs:	r0 is the error code
- *		r2, r3 contains the zero-extended value
+ *		r2 contains the zero-extended value
  *		lr corrupted
  *
  * No other registers must be altered.  (see <asm/uaccess.h>
@@ -27,33 +28,39 @@
  * Note also that it is intended that __get_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__get_user_1)
+	check_uaccess r0, 1, r1, r2, __get_user_bad
 1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
-#ifdef CONFIG_THUMB2_KERNEL
-2: TUSER(ldrb)	r2, [r0]
-3: TUSER(ldrb)	r3, [r0, #1]
+	check_uaccess r0, 2, r1, r2, __get_user_bad
+#ifdef CONFIG_CPU_USE_DOMAINS
+rb	.req	ip
+2:	ldrbt	r2, [r0], #1
+3:	ldrbt	rb, [r0], #0
 #else
-2: TUSER(ldrb)	r2, [r0], #1
-3: TUSER(ldrb)	r3, [r0]
+rb	.req	r0
+2:	ldrb	r2, [r0]
+3:	ldrb	rb, [r0, #1]
 #endif
 #ifndef __ARMEB__
-	orr	r2, r2, r3, lsl #8
+	orr	r2, r2, rb, lsl #8
 #else
-	orr	r2, r3, r2, lsl #8
+	orr	r2, rb, r2, lsl #8
 #endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
+	check_uaccess r0, 4, r1, r2, __get_user_bad
 4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 7db25990c589..3d73dcb959b0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -16,6 +16,7 @@
  * __put_user_X
  *
  * Inputs:	r0 contains the address
+ *		r1 contains the address limit, which must be preserved
  *		r2, r3 contains the value
  * Outputs:	r0 is the error code
  *		lr corrupted
@@ -27,16 +28,19 @@
  * Note also that it is intended that __put_user_bad is not global.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
 
 ENTRY(__put_user_1)
+	check_uaccess r0, 1, r1, ip, __put_user_bad
 1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
+	check_uaccess r0, 2, r1, ip, __put_user_bad
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
@@ -60,12 +64,14 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
+	check_uaccess r0, 4, r1, ip, __put_user_bad
 4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+	check_uaccess r0, 8, r1, ip, __put_user_bad
 #ifdef CONFIG_THUMB2_KERNEL
 5: TUSER(str)	r2, [r0]
 6: TUSER(str)	r3, [r0, #4]
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index fdd8cc87c9fe..4431a62fff5b 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -222,10 +222,8 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
 	clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
-	clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
 	clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index c6422fb10bae..65fb8bcd86cb 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -230,10 +230,8 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
 	clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
-	clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
-	clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
-	clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+	clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+	clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
 	/* i.mx35 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
 	clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index c1309495eeb6..eef99b77c40b 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -233,10 +233,11 @@ config MACH_OMAP3_PANDORA
 	select OMAP_PACKAGE_CBB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
-config MACH_OMAP3_TOUCHBOOK
+config MACH_TOUCHBOOK
 	bool "OMAP3 Touch Book"
 	depends on ARCH_OMAP3
 	default y
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index f6a24b3f9c4f..34c2c7f59f0a 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-zoom-display.o
 obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o
 obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o
-obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o
+obj-$(CONFIG_MACH_TOUCHBOOK)		+= board-omap3touchbook.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o
 
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 7aa5ecaee5a2..8e06de665b14 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"mmu_fck",		&mmu_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck,	CK_AM33XX),
 	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt1_fck",		&timer1_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt2_fck",		&timer2_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt3_fck",		&timer3_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt4_fck",		&timer4_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt5_fck",		&timer5_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt6_fck",		&timer6_fck,	CK_AM33XX),
-	CLK(NULL,	"gpt7_fck",		&timer7_fck,	CK_AM33XX),
+	CLK(NULL,	"timer1_fck",		&timer1_fck,	CK_AM33XX),
+	CLK(NULL,	"timer2_fck",		&timer2_fck,	CK_AM33XX),
+	CLK(NULL,	"timer3_fck",		&timer3_fck,	CK_AM33XX),
+	CLK(NULL,	"timer4_fck",		&timer4_fck,	CK_AM33XX),
+	CLK(NULL,	"timer5_fck",		&timer5_fck,	CK_AM33XX),
+	CLK(NULL,	"timer6_fck",		&timer6_fck,	CK_AM33XX),
+	CLK(NULL,	"timer7_fck",		&timer7_fck,	CK_AM33XX),
 	CLK(NULL,	"usbotg_fck",		&usbotg_fck,	CK_AM33XX),
 	CLK(NULL,	"ieee5000_fck",		&ieee5000_fck,	CK_AM33XX),
 	CLK(NULL,	"wdt1_fck",		&wdt1_fck,	CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
index a0d68dbecfa3..f99e65cfb862 100644
--- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
@@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm)
 		_clkdm_del_autodeps(clkdm);
 }
 
+static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
+		_clkdm_add_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
+			omap3_clkdm_wakeup(clkdm);
+	}
+
+	return 0;
+}
+
+static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm)
+{
+	bool hwsup = false;
+
+	if (!clkdm->clktrctrl_mask)
+		return 0;
+
+	hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+				clkdm->clktrctrl_mask);
+
+	if (hwsup) {
+		/* Disable HW transitions when we are changing deps */
+		_disable_hwsup(clkdm);
+		_clkdm_del_autodeps(clkdm);
+		_enable_hwsup(clkdm);
+	} else {
+		if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)
+			omap3_clkdm_sleep(clkdm);
+	}
+
+	return 0;
+}
+
 struct clkdm_ops omap2_clkdm_operations = {
 	.clkdm_add_wkdep	= omap2_clkdm_add_wkdep,
 	.clkdm_del_wkdep	= omap2_clkdm_del_wkdep,
@@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = {
 	.clkdm_wakeup		= omap3_clkdm_wakeup,
 	.clkdm_allow_idle	= omap3_clkdm_allow_idle,
 	.clkdm_deny_idle	= omap3_clkdm_deny_idle,
-	.clkdm_clk_enable	= omap2_clkdm_clk_enable,
-	.clkdm_clk_disable	= omap2_clkdm_clk_disable,
+	.clkdm_clk_enable	= omap3xxx_clkdm_clk_enable,
+	.clkdm_clk_disable	= omap3xxx_clkdm_clk_disable,
 };
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 766338fe4d34..975f6bda0e0b 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -67,6 +67,7 @@
 #define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
 
 /* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2_SHIFT				0
 #define OMAP3430_ST_IVA2_MASK				(1 << 0)
 
 /* CM_IDLEST_PLL_IVA2 */
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index b54427dec2a3..ecaad7d371ee 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -47,7 +47,7 @@
 static void __iomem *wakeupgen_base;
 static void __iomem *sar_base;
 static DEFINE_SPINLOCK(wakeupgen_lock);
-static unsigned int irq_target_cpu[NR_IRQS];
+static unsigned int irq_target_cpu[MAX_IRQS];
 static unsigned int irq_banks = MAX_NR_REG_BANKS;
 static unsigned int max_irqs = MAX_IRQS;
 static unsigned int omap_secure_apis;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 4c6b5a774054..4a810f6c4c04 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh)
 			_enable_sysc(oh);
 		}
 	} else {
+		_omap4_disable_module(oh);
 		_disable_clocks(oh);
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 75fbbac13921..8fec2cee3e14 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = {
 
 /* IVA2 (IVA2) */
 static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = {
-	{ .name = "logic", .rst_shift = 0 },
-	{ .name = "seq0", .rst_shift = 1 },
-	{ .name = "seq1", .rst_shift = 2 },
+	{ .name = "logic", .rst_shift = 0, .st_shift = 8 },
+	{ .name = "seq0", .rst_shift = 1, .st_shift = 9 },
+	{ .name = "seq1", .rst_shift = 2, .st_shift = 10 },
 };
 
 static struct omap_hwmod omap3xxx_iva_hwmod = {
@@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = {
 	.rst_lines	= omap3xxx_iva_resets,
 	.rst_lines_cnt	= ARRAY_SIZE(omap3xxx_iva_resets),
 	.main_clk	= "iva2_ck",
+	.prcm = {
+		.omap2 = {
+			.module_offs = OMAP3430_IVA2_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT,
+		}
+	},
 };
 
 /* timer class */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index b95244b76a15..110be87cd995 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -4209,7 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
 };
 
 /* dsp -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = {
 	.master		= &omap44xx_dsp_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -4827,7 +4827,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = {
 };
 
 /* iva -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = {
 	.master		= &omap44xx_iva_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "dpll_iva_m5x2_ck",
@@ -5361,7 +5361,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = {
 };
 
 /* l3_main_2 -> sl2if */
-static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = {
+static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.master		= &omap44xx_l3_main_2_hwmod,
 	.slave		= &omap44xx_sl2if_hwmod,
 	.clk		= "l3_div_ck",
@@ -6031,7 +6031,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_abe__dmic,
 	&omap44xx_l4_abe__dmic_dma,
 	&omap44xx_dsp__iva,
-	&omap44xx_dsp__sl2if,
+	/* &omap44xx_dsp__sl2if, */
 	&omap44xx_l4_cfg__dsp,
 	&omap44xx_l3_main_2__dss,
 	&omap44xx_l4_per__dss,
@@ -6067,7 +6067,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_per__i2c4,
 	&omap44xx_l3_main_2__ipu,
 	&omap44xx_l3_main_2__iss,
-	&omap44xx_iva__sl2if,
+	/* &omap44xx_iva__sl2if, */
 	&omap44xx_l3_main_2__iva,
 	&omap44xx_l4_wkup__kbd,
 	&omap44xx_l4_cfg__mailbox,
@@ -6098,7 +6098,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_cfg__cm_core,
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
-	&omap44xx_l3_main_2__sl2if,
+	/* &omap44xx_l3_main_2__sl2if, */
 	&omap44xx_l4_abe__slimbus1,
 	&omap44xx_l4_abe__slimbus1_dma,
 	&omap44xx_l4_per__slimbus2,
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index e2084facca59..8f4525047200 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -263,6 +263,7 @@ static u32 notrace dmtimer_read_sched_clock(void)
 	return 0;
 }
 
+#ifdef CONFIG_OMAP_32K_TIMER
 /* Setup free-running counter for clocksource */
 static int __init omap2_sync32k_clocksource_init(void)
 {
@@ -302,6 +303,12 @@ static int __init omap2_sync32k_clocksource_init(void)
 
 	return ret;
 }
+#else
+static inline int omap2_sync32k_clocksource_init(void)
+{
+	return -ENODEV;
+}
+#endif
 
 static void __init omap2_gptimer_clocksource_init(int gptimer_id,
 						const char *fck_source)
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 5691ef679d01..f24710dfc395 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-uib.o board-mop500-stuib.o \
 				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
-				board-mop500-msp.o
+				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-audio.c
index df15646036aa..070629a95625 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -7,7 +7,6 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
-#include <linux/pinctrl/consumer.h>
 
 #include <plat/gpio-nomadik.h>
 #include <plat/pincfg.h>
@@ -23,53 +22,6 @@
 #include "devices-db8500.h"
 #include "pins-db8500.h"
 
-/* MSP1/3 Tx/Rx usage protection */
-static DEFINE_SPINLOCK(msp_rxtx_lock);
-
-/* Reference Count */
-static int msp_rxtx_ref;
-
-/* Pin modes */
-struct pinctrl *msp1_p;
-struct pinctrl_state *msp1_def;
-struct pinctrl_state *msp1_sleep;
-
-int msp13_i2s_init(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_def))) {
-		retval = pinctrl_select_state(msp1_p, msp1_def);
-		if (retval)
-			pr_err("could not set MSP1 defstate\n");
-	}
-	if (!retval)
-		msp_rxtx_ref++;
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
-int msp13_i2s_exit(void)
-{
-	int retval = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&msp_rxtx_lock, flags);
-	WARN_ON(!msp_rxtx_ref);
-	msp_rxtx_ref--;
-	if (msp_rxtx_ref == 0 && !(IS_ERR(msp1_p) || IS_ERR(msp1_sleep))) {
-		retval = pinctrl_select_state(msp1_p, msp1_sleep);
-		if (retval)
-			pr_err("could not set MSP1 sleepstate\n");
-	}
-	spin_unlock_irqrestore(&msp_rxtx_lock, flags);
-
-	return retval;
-}
-
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
 	.dir = STEDMA40_PERIPH_TO_MEM,
@@ -96,7 +48,7 @@ static struct stedma40_chan_cfg msp0_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp0_platform_data = {
+struct msp_i2s_platform_data msp0_platform_data = {
 	.id = MSP_I2S_0,
 	.msp_i2s_dma_rx = &msp0_dma_rx,
 	.msp_i2s_dma_tx = &msp0_dma_tx,
@@ -128,12 +80,10 @@ static struct stedma40_chan_cfg msp1_dma_tx = {
 	/* data_width is set during configuration */
 };
 
-static struct msp_i2s_platform_data msp1_platform_data = {
+struct msp_i2s_platform_data msp1_platform_data = {
 	.id = MSP_I2S_1,
 	.msp_i2s_dma_rx = NULL,
 	.msp_i2s_dma_tx = &msp1_dma_tx,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
@@ -193,11 +143,11 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 
 /* Platform device for ASoC MOP500 machine */
 static struct platform_device snd_soc_mop500 = {
-		.name = "snd-soc-mop500",
-		.id = 0,
-		.dev = {
-			.platform_data = NULL,
-		},
+	.name = "snd-soc-mop500",
+	.id = 0,
+	.dev = {
+		.platform_data = NULL,
+	},
 };
 
 /* Platform device for Ux500-PCM */
@@ -209,59 +159,37 @@ static struct platform_device ux500_pcm = {
 		},
 };
 
-static struct msp_i2s_platform_data msp2_platform_data = {
+struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
 	.msp_i2s_dma_tx = &msp2_dma_tx,
 };
 
-static struct msp_i2s_platform_data msp3_platform_data = {
+struct msp_i2s_platform_data msp3_platform_data = {
 	.id		= MSP_I2S_3,
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
-	.msp_i2s_init = msp13_i2s_init,
-	.msp_i2s_exit = msp13_i2s_exit,
 };
 
-int mop500_msp_init(struct device *parent)
+void mop500_audio_init(struct device *parent)
 {
-	struct platform_device *msp1;
-
 	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
 	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
 			   &msp0_platform_data);
-	msp1 = db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
 			   &msp1_platform_data);
 	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
 			   &msp2_platform_data);
 	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
 			   &msp3_platform_data);
+}
 
-	/* Get the pinctrl handle for MSP1 */
-	if (msp1) {
-		msp1_p = pinctrl_get(&msp1->dev);
-		if (IS_ERR(msp1_p))
-			dev_err(&msp1->dev, "could not get MSP1 pinctrl\n");
-		else {
-			msp1_def = pinctrl_lookup_state(msp1_p,
-							PINCTRL_STATE_DEFAULT);
-			if (IS_ERR(msp1_def)) {
-				dev_err(&msp1->dev,
-					"could not get MSP1 defstate\n");
-			}
-			msp1_sleep = pinctrl_lookup_state(msp1_p,
-							  PINCTRL_STATE_SLEEP);
-			if (IS_ERR(msp1_sleep))
-				dev_err(&msp1->dev,
-					"could not get MSP1 idlestate\n");
-		}
-	}
-
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent)
+{
 	pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
 	platform_device_register(&ux500_pcm);
-
-	return 0;
 }
diff --git a/arch/arm/mach-ux500/board-mop500-msp.h b/arch/arm/mach-ux500/board-mop500-msp.h
deleted file mode 100644
index 6fcfb5e2cc94..000000000000
--- a/arch/arm/mach-ux500/board-mop500-msp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2012
- *
- * Author: Ola Lilja <ola.o.lilja@stericsson.com>,
- *         for ST-Ericsson.
- *
- * License terms:
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-void mop500_msp_init(struct device *parent);
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 18ff781cfbe4..9c8e4a9e83ee 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -152,7 +152,7 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi1_data = {
+struct mmci_platform_data mop500_sdi1_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA,
@@ -189,7 +189,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 };
 #endif
 
-static struct mmci_platform_data mop500_sdi2_data = {
+struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 50000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 1d2e3c6f8b59..12ab21d5511f 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -54,7 +54,6 @@
 #include "devices-db8500.h"
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
-#include "board-mop500-msp.h"
 
 static struct gpio_led snowball_led_array[] = {
 	{
@@ -587,7 +586,7 @@ static void __init mop500_init_machine(void)
 	mop500_i2c_init(parent);
 	mop500_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	u8500_cryp1_hash1_init(parent);
@@ -621,7 +620,7 @@ static void __init snowball_init_machine(void)
 	mop500_i2c_init(parent);
 	snowball_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	/* This board has full regulator constraints */
@@ -653,7 +652,7 @@ static void __init hrefv60_init_machine(void)
 	mop500_i2c_init(parent);
 	hrefv60_sdi_init(parent);
 	mop500_spi_init(parent);
-	mop500_msp_init(parent);
+	mop500_audio_init(parent);
 	mop500_uart_init(parent);
 
 	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -705,12 +704,9 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+	/* Requires call-back bindings. */
+	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
 	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
@@ -718,6 +714,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA bindings. */
 	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
 	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	/* Requires clock name bindings. */
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
@@ -736,6 +734,15 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+	/* Requires clock name and DMA bindings. */
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		"ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		"ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		"ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		"ux500-msp-i2s.3", &msp3_platform_data),
 	{},
 };
 
@@ -776,7 +783,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
-		mop500_msp_init(parent);
+		mop500_audio_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -785,7 +792,7 @@ static void __init u8500_init_machine(void)
 		mop500_uib_init();
 
 	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
-		mop500_msp_init(parent);
+		mop500_of_audio_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -796,16 +803,6 @@ static void __init u8500_init_machine(void)
 		platform_add_devices(mop500_platform_devs,
 				ARRAY_SIZE(mop500_platform_devs));
 
-		hrefv60_sdi_init(parent);
-		mop500_msp_init(parent);
-
-		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
-		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
-
-		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
-		i2c_register_board_info(2, mop500_i2c2_devices,
-					ARRAY_SIZE(mop500_i2c2_devices));
-
 		mop500_uib_init();
 	}
 
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index b5bfc1a78b1a..aca39a68712a 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -9,6 +9,7 @@
 
 /* For NOMADIK_NR_GPIO */
 #include <mach/irqs.h>
+#include <mach/msp.h>
 #include <linux/amba/mmci.h>
 
 /* Snowball specific GPIO assignments, this board has no GPIO expander */
@@ -80,7 +81,14 @@
 struct device;
 struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
+extern struct mmci_platform_data mop500_sdi1_data;
+extern struct mmci_platform_data mop500_sdi2_data;
 extern struct mmci_platform_data mop500_sdi4_data;
+extern struct msp_i2s_platform_data msp0_platform_data;
+extern struct msp_i2s_platform_data msp1_platform_data;
+extern struct msp_i2s_platform_data msp2_platform_data;
+extern struct msp_i2s_platform_data msp3_platform_data;
+extern struct arm_pmu_platdata db8500_pmu_platdata;
 
 extern void mop500_sdi_init(struct device *parent);
 extern void snowball_sdi_init(struct device *parent);
@@ -91,6 +99,9 @@ void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
+void mop500_audio_init(struct device *parent);
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index db3c52d56ca4..38b7f9c4788b 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -138,10 +138,6 @@ static struct platform_device *platform_devs[] __initdata = {
 	&db8500_prcmu_device,
 };
 
-static struct platform_device *of_platform_devs[] __initdata = {
-	&u8500_dma40_device,
-};
-
 static resource_size_t __initdata db8500_gpio_base[] = {
 	U8500_GPIOBANK0_BASE,
 	U8500_GPIOBANK1_BASE,
@@ -235,7 +231,6 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
 struct device * __init u8500_of_init_devices(void)
 {
 	struct device *parent;
-	int i;
 
 	parent = db8500_soc_device_init();
 
@@ -244,8 +239,7 @@ struct device * __init u8500_of_init_devices(void)
 	platform_device_register_data(parent,
 		"cpufreq-u8500", -1, NULL, 0);
 
-	for (i = 0; i < ARRAY_SIZE(of_platform_devs); i++)
-		of_platform_devs[i]->dev.parent = parent;
+	u8500_dma40_device.dev.parent = parent;
 
 	/*
 	 * Devices to be DT:ed:
@@ -253,7 +247,7 @@ struct device * __init u8500_of_init_devices(void)
 	 *   db8500_pmu_device   = done
 	 *   db8500_prcmu_device = done
 	 */
-	platform_add_devices(of_platform_devs, ARRAY_SIZE(of_platform_devs));
+	platform_device_register(&u8500_dma40_device);
 
 	return parent;
 }
diff --git a/arch/arm/mach-ux500/include/mach/msp.h b/arch/arm/mach-ux500/include/mach/msp.h
index 798be19129ef..3cc7142eee02 100644
--- a/arch/arm/mach-ux500/include/mach/msp.h
+++ b/arch/arm/mach-ux500/include/mach/msp.h
@@ -22,8 +22,6 @@ struct msp_i2s_platform_data {
 	enum msp_i2s_id id;
 	struct stedma40_chan_cfg *msp_i2s_dma_rx;
 	struct stedma40_chan_cfg *msp_i2s_dma_tx;
-	int (*msp_i2s_init) (void);
-	int (*msp_i2s_exit) (void);
 };
 
 #endif
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 119bc52ab93e..4e07eec1270d 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
 	pid = task_pid_nr(thread->task) << ASID_BITS;
 	asm volatile(
 	"	mrc	p15, 0, %0, c13, c0, 1\n"
-	"	bfi	%1, %0, #0, %2\n"
-	"	mcr	p15, 0, %1, c13, c0, 1\n"
+	"	and	%0, %0, %2\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c13, c0, 1\n"
 	: "=r" (contextidr), "+r" (pid)
-	: "I" (ASID_BITS));
+	: "I" (~ASID_MASK));
 	isb();
 
 	return NOTIFY_OK;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 051204fc4617..e59c4ab71bcb 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -489,7 +489,7 @@ static bool __in_atomic_pool(void *start, size_t size)
 	void *pool_start = pool->vaddr;
 	void *pool_end = pool->vaddr + pool->size;
 
-	if (start < pool_start || start > pool_end)
+	if (start < pool_start || start >= pool_end)
 		return false;
 
 	if (end <= pool_end)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 6776160618ef..a8ee92da3544 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 /* permanent static mappings from iotable_init() */
 #define VM_ARM_STATIC_MAPPING	0x40000000
 
+/* empty mapping */
+#define VM_ARM_EMPTY_MAPPING	0x20000000
+
 /* mapping type (attributes) for permanent static mappings */
 #define VM_ARM_MTYPE(mt)		((mt) << 20)
 #define VM_ARM_MTYPE_MASK	(0x1f << 20)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4c2d0451e84a..c2fa21d0103e 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr)
 	vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm));
 	vm->addr = (void *)addr;
 	vm->size = SECTION_SIZE;
-	vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING;
+	vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING;
 	vm->caller = pmd_empty_section_gap;
 	vm_area_add_early(vm);
 }
@@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void)
 
 	/* we're still single threaded hence no lock needed here */
 	for (vm = vmlist; vm; vm = vm->next) {
-		if (!(vm->flags & VM_ARM_STATIC_MAPPING))
+		if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING)))
 			continue;
 		addr = (unsigned long)vm->addr;
 		if (addr < next)
@@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void)
 		 * Check whether this memory bank would partially overlap
 		 * the vmalloc area.
 		 */
-		if (__va(bank->start + bank->size) > vmalloc_min ||
-		    __va(bank->start + bank->size) < __va(bank->start)) {
+		if (__va(bank->start + bank->size - 1) >= vmalloc_min ||
+		    __va(bank->start + bank->size - 1) <= __va(bank->start)) {
 			unsigned long newsize = vmalloc_min - __va(bank->start);
 			printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx "
 			       "to -%.8llx (vmalloc region overlap).\n",
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index d861aa73299d..28acb383e7df 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -67,6 +67,7 @@
 
 static unsigned long omap_sram_start;
 static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
 static unsigned long omap_sram_size;
 static void __iomem *omap_sram_ceil;
 
@@ -105,6 +106,7 @@ static int is_sram_locked(void)
  */
 static void __init omap_detect_sram(void)
 {
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
 	if (cpu_class_is_omap2()) {
 		if (is_sram_locked()) {
 			if (cpu_is_omap34xx()) {
@@ -112,6 +114,7 @@ static void __init omap_detect_sram(void)
 				if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
 				    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
 					omap_sram_size = 0x7000; /* 28K */
+					omap_sram_skip += SZ_16K;
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
@@ -174,8 +177,10 @@ static void __init omap_map_sram(void)
 		return;
 
 #ifdef CONFIG_OMAP4_ERRATA_I688
+	if (cpu_is_omap44xx()) {
 		omap_sram_start += PAGE_SIZE;
 		omap_sram_size -= SZ_16K;
+	}
 #endif
 	if (cpu_is_omap34xx()) {
 		/*
@@ -202,8 +207,8 @@ static void __init omap_map_sram(void)
 	 * Looks like we need to preserve some bootloader code at the
 	 * beginning of SRAM for jumping to flash for reboot to work...
 	 */
-	memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
-		  omap_sram_size - SRAM_BOOTLOADER_SZ);
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
 }
 
 /*
@@ -217,7 +222,7 @@ void *omap_sram_push_address(unsigned long size)
 {
 	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
 
-	available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
 
 	if (size > available) {
 		pr_err("Not enough space in SRAM\n");