diff options
author | Ludovic Desroches <ludovic.desroches@microchip.com> | 2017-09-14 17:28:12 +0300 |
---|---|---|
committer | Nicolas Ferre <nicolas.ferre@microchip.com> | 2017-09-18 09:58:16 +0200 |
commit | 27563cd9f8f52f09523e061985917c38f302bd0c (patch) | |
tree | 92f88879e1423a2468fc815016b7004214e081b0 /arch/arm | |
parent | 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e (diff) | |
download | linux-27563cd9f8f52f09523e061985917c38f302bd0c.tar.bz2 |
ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USB
There are some changes from the prototype board concerning LEDs and USB
pins:
- USBB power enable and red LED pins are inverted.
- The polarity of LEDs is inverted too.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 9c9088c99cc4..f13ef4fbab60 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -67,7 +67,7 @@ usb1: ohci@00400000 { num-ports = <3>; - atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; + atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_default>; status = "okay"; @@ -330,7 +330,7 @@ }; pinctrl_led_gpio_default: led_gpio_default { - pinmux = <PIN_PA27__GPIO>, + pinmux = <PIN_PA10__GPIO>, <PIN_PB1__GPIO>, <PIN_PA31__GPIO>; bias-pull-up; @@ -396,7 +396,7 @@ }; pinctrl_usb_default: usb_default { - pinmux = <PIN_PA10__GPIO>, + pinmux = <PIN_PA27__GPIO>, <PIN_PD19__GPIO>; bias-disable; }; @@ -520,17 +520,17 @@ red { label = "red"; - gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>; }; green { label = "green"; - gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>; }; blue { label = "blue"; - gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>; + gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; |