summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-23 18:56:08 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-23 18:56:08 -0800
commit7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24 (patch)
tree460812792bc3b23789a83968b7bad840cc3eb047 /arch/arm
parent0ba3307a8ec35252f7b1e222e32889a6f3d9ceb3 (diff)
parent2e84d75116c17c2034e917b411250d2d11755435 (diff)
downloadlinux-7e21774db5cc9cf8fe93a64a2f0c6cf47db8ab24.tar.bz2
Merge tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux
Pull clk framework changes from Mike Turquette: "The first half of the clk framework pull request is made up almost entirely of new platform/driver support. There are some conversions of existing drivers to the common-clock Device Tree binding, and a few non-critical fixes to the framework. Due to an entirely unnecessary cyclical dependency with the arm-soc tree this pull request is broken into two pieces. The second piece will be sent out after arm-soc sends you the pull request that merged in core support for the HiSilicon 3620 platform. That same pull request from arm-soc depends on this pull request to merge in those HiSilicon bits without causing build failures" [ Just did the ARM SoC merges, so getting ready for the second clk tree pull request - Linus ] * tag 'clk-for-linus-3.14-part1' of git://git.linaro.org/people/mike.turquette/linux: (97 commits) devicetree: bindings: Document qcom,mmcc devicetree: bindings: Document qcom,gcc clk: qcom: Add support for MSM8660's global clock controller (GCC) clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8974's global clock controller (GCC) clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC) clk: qcom: Add support for MSM8960's global clock controller (GCC) clk: qcom: Add reset controller support clk: qcom: Add support for branches/gate clocks clk: qcom: Add support for root clock generators (RCGs) clk: qcom: Add support for phase locked loops (PLLs) clk: qcom: Add a regmap type clock struct clk: Add set_rate_and_parent() op reset: Silence warning in reset-controller.h clk: sirf: re-arch to make the codes support both prima2 and atlas6 clk: composite: pass mux_hw into determine_rate clk: shmobile: Fix MSTP clock array initialization clk: shmobile: Fix MSTP clock index ARM: dts: Add clock provider specific properties to max77686 node clk: max77686: Register OF clock provider ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts1
-rw-r--r--arch/arm/boot/dts/exynos4412-trats2.dts1
-rw-r--r--arch/arm/boot/dts/exynos5250-cros-common.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi4
-rw-r--r--arch/arm/include/asm/clkdev.h2
6 files changed, 9 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 8aad5f72ced7..9804fcb71f8c 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -116,6 +116,7 @@
max77686: pmic@09 {
compatible = "maxim,max77686";
reg = <0x09>;
+ #clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 890ad275cb85..4f851ccf40eb 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -139,6 +139,7 @@
interrupt-parent = <&gpx0>;
interrupts = <7 0>;
reg = <0x09>;
+ #clock-cells = <1>;
voltage-regulators {
ldo1_reg: ldo1 {
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 9a61494f45f5..2c1560d52f1a 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -49,6 +49,7 @@
pinctrl-0 = <&max77686_irq>;
wakeup-source;
reg = <0x09>;
+ #clock-cells = <1>;
voltage-regulators {
ldo1_reg: LDO1 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 587dd3e36f6c..b7dec41e32af 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -90,6 +90,8 @@
compatible = "samsung,exynos5250-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
+ clocks = <&clock 1>, <&clock 7>, <&clock 138>, <&clock 160>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
timer {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 11dd202c54bb..8db792b26f79 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -119,8 +119,8 @@
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
- clocks = <&clock 148>;
- clock-names = "sclk_audio";
+ clocks = <&clock 1>, <&clock 5>, <&clock 148>, <&clock 149>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
codec@11000000 {
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index 80751c15c300..4e8a4b27d7c7 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -14,12 +14,14 @@
#include <linux/slab.h>
+#ifndef CONFIG_COMMON_CLK
#ifdef CONFIG_HAVE_MACH_CLKDEV
#include <mach/clkdev.h>
#else
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
#endif
+#endif
static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
{