diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-03 15:22:05 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-04-03 15:22:05 -0700 |
| commit | 854e80bcfdafb8d99d308e21798cd0116338783d (patch) | |
| tree | e0060112d7c598c111d61f13174a5e9c468b07f6 /arch/arm | |
| parent | 9b48c8f132e0c30220ce509f72dd90da05245524 (diff) | |
| parent | 8bdbf169084ec00833bff61cda0014b7fbdf15ac (diff) | |
| download | linux-854e80bcfdafb8d99d308e21798cd0116338783d.tar.bz2 | |
Merge tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"Most of the commits are for additional hardware support and minor
fixes for existing machines for all the usual platforms: qcom,
amlogic, at91, gemini, mediatek, ti, socfpga, i.mx, layerscape,
uniphier, rockchip, exynos, ux500, mvebu, tegra, stm32, renesas,
sunxi, broadcom, omap, and versatile.
The conversion of binding files to machine-readable yaml format
continues, along with fixes found during the validation. Andre
Przywara takes over maintainership for the old Calxeda Highbank
platform and provides a number of updates.
The OMAP2+ platforms see a continued move from platform data into dts
files, for many devices that relied on a mix of auxiliary data in
addition to the DT description
A moderate number of new SoCs and machines are added, here is a full
list:
- Two new Qualcomm SoCs with their evaluation boards: Snapdragon 865
(SM8250) is the current high-end phone chip, and IPQ6018 is a new
WiFi-6 router chip.
- Mediatek MT8516 application processor SoC for voice assistants,
along with the "pumpkin" development board
- NXP i.MX8M Plus SoC, a variant of the popular i.MX8M, along with an
evaluation board.
- Kontron "sl28" board family based on NXP LS1028A
- Eleven variations of the new i.MX6 TechNexion Pico board, combining
the "dwarf", "hobbit", "nymph" and "pi" baseboards with i.MX6/i.MX7
SoM carriers
- Three additional variants of the Toradex Colibri board family, all
based on versions of the NXP i.MX7.
- The Pinebook Pro laptop based on Rockchip RK3399
- Samsung S7710 Galaxy Xcover 2, a 2013 vintage Android phone based
on the ST-Ericsson u8500 platform
- DH Electronics DHCOM SoM and PDK2 rev. 400 carrier based on
STMicroelectronics stm32mp157
- Renesas M3ULCB starter kit for R-Car M3-W+
- Hoperun HiHope development board with Renesas RZ/G2M
- Pine64 PineTab tablet and PinePhone phone, both based on Allwinner
A64
- Linutronix Testbox v2 for the Lamobo R1 router, based on Allwinner
A20
- PocketBook Touch Lux 3 ebook reader, based on Allwinner A13"
* tag 'arm-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (520 commits)
ARM: dts: ux500: Fix missing node renames
arm64: dts: Revert "specify console via command line"
MAINTAINERS: Update Calxeda Highbank maintainership
arm: dts: calxeda: Group port-phys and sgpio-gpio items
arm: dts: calxeda: Fix interrupt grouping
arm: dts: calxeda: Provide UART clock
arm: dts: calxeda: Basic DT file fixes
arm64: dts: specify console via command line
ARM: dts: at91: sama5d27_wlsom1_ek: add USB device node
ARM: dts: gemini: Add thermal zone to DIR-685
ARM: dts: gemini: Rename IDE nodes
ARM: socfpga: arria10: Add ptp_ref clock to ethernet nodes
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
...
Diffstat (limited to 'arch/arm')
266 files changed, 6376 insertions, 3328 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d6546d2676b9..e8dd99201397 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -446,6 +446,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-mira-rdk-nand.dtb \ imx6dl-phytec-pbab01.dtb \ + imx6dl-pico-dwarf.dtb \ + imx6dl-pico-hobbit.dtb \ + imx6dl-pico-nymph.dtb \ + imx6dl-pico-pi.dtb \ imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ @@ -529,6 +533,10 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-phytec-mira-rdk-emmc.dtb \ imx6q-phytec-mira-rdk-nand.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-pico-dwarf.dtb \ + imx6q-pico-hobbit.dtb \ + imx6q-pico-nymph.dtb \ + imx6q-pico-pi.dtb \ imx6q-pistachio.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ @@ -594,6 +602,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-kontron-n6310-s-43.dtb \ imx6ul-liteboard.dtb \ imx6ul-opos6uldev.dtb \ + imx6ul-pico-dwarf.dtb \ imx6ul-pico-hobbit.dtb \ imx6ul-pico-pi.dtb \ imx6ul-phytec-segin-ff-rdk-nand.dtb \ @@ -610,12 +619,16 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ulz-14x14-evk.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-aster.dtb \ + imx7d-colibri-emmc-aster.dtb \ imx7d-colibri-emmc-eval-v3.dtb \ imx7d-colibri-eval-v3.dtb \ imx7d-mba7.dtb \ imx7d-meerkat96.dtb \ imx7d-nitrogen7.dtb \ + imx7d-pico-dwarf.dtb \ imx7d-pico-hobbit.dtb \ + imx7d-pico-nymph.dtb \ imx7d-pico-pi.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ @@ -623,6 +636,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-sdb-sht11.dtb \ imx7d-zii-rmu2.dtb \ imx7d-zii-rpu2.dtb \ + imx7s-colibri-aster.dtb \ imx7s-colibri-eval-v3.dtb \ imx7s-mba7.dtb \ imx7s-warp.dtb @@ -1016,6 +1030,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-disco.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dk1.dtb \ + stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dk2.dtb \ stm32mp157c-ed1.dtb \ stm32mp157c-ev1.dtb @@ -1056,6 +1071,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-licheepi-one.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-pocketbook-touch-lux-3.dtb \ sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb \ sun5i-gr8-chip-pro.dtb \ @@ -1086,6 +1102,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ sun7i-a20-lamobo-r1.dtb \ + sun7i-a20-linutronix-testbox-v2.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ sun7i-a20-olimex-som-evb.dtb \ @@ -1202,7 +1219,8 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-stuib.dtb \ ste-hrefv60plus-tvk.dtb \ ste-href520-tvk.dtb \ - ste-ux500-samsung-golden.dtb + ste-ux500-samsung-golden.dtb \ + ste-ux500-samsung-skomer.dtb dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ld4-ref.dtb \ uniphier-ld6b-ref.dtb \ diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 4e2986f0c604..5ed7f3c58c0f 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -759,12 +759,27 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 41dcfb37155a..a35f5052d76f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -47,6 +47,7 @@ #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a8"; + enable-method = "ti,am3352"; device_type = "cpu"; reg = <0>; @@ -56,6 +57,17 @@ clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <90>; + min-residency-us = <300>; + ti,idle-wkup-m3; + }; }; }; @@ -193,45 +205,100 @@ reg = <0x48200000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index faa14dc0faff..dba87bfaf33e 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -45,6 +45,7 @@ #size-cells = <0>; cpu: cpu@0 { compatible = "arm,cortex-a9"; + enable-method = "ti,am4372"; device_type = "cpu"; reg = <0>; @@ -54,6 +55,17 @@ operating-points-v2 = <&cpu0_opp_table>; clock-latency = <300000>; /* From omap-cpufreq driver */ + cpu-idle-states = <&mpu_gate>; + }; + + idle-states { + mpu_gate: mpu_gate { + compatible = "arm,idle-state"; + entry-latency-us = <40>; + exit-latency-us = <100>; + min-residency-us = <300>; + local-timer-stop; + }; }; }; @@ -185,47 +197,102 @@ &pm_sram_data>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 0>; - - ti,edma-memcpy-channels = <58 59>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <58 59>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; target-module@47810000 { @@ -344,6 +411,28 @@ }; }; + pruss_tm: target-module@54400000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x54426000 0x4>, + <0x54426004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54400000 0x80000>; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; @@ -394,38 +483,6 @@ }; }; - dss: dss@4832a000 { - compatible = "ti,omap3-dss"; - reg = <0x4832a000 0x200>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&disp_clk>; - clock-names = "fck"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dispc: dispc@4832a400 { - compatible = "ti,omap3-dispc"; - reg = <0x4832a400 0x400>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&disp_clk>; - clock-names = "fck"; - - max-memory-bandwidth = <230000000>; - }; - - rfbi: rfbi@4832a800 { - compatible = "ti,omap3-rfbi"; - reg = <0x4832a800 0x100>; - ti,hwmods = "dss_rfbi"; - clocks = <&disp_clk>; - clock-names = "fck"; - status = "disabled"; - }; - }; - ocmcram: sram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x40000>; /* 256k */ diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi index e18e17d31272..49c6a872052e 100644 --- a/arch/arm/boot/dts/am437x-l4.dtsi +++ b/arch/arm/boot/dts/am437x-l4.dtsi @@ -2117,7 +2117,6 @@ target-module@2a000 { /* 0x4832a000, ap 88 3c.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "dss_core"; reg = <0x2a000 0x4>, <0x2a010 0x4>, <0x2a014 0x4>; @@ -2135,6 +2134,82 @@ <0x00000800 0x0002a800 0x00000400>, <0x00000c00 0x0002ac00 0x00000400>, <0x00001000 0x0002b000 0x00001000>; + + dss: dss@0 { + compatible = "ti,omap3-dss"; + reg = <0 0x200>; + status = "disabled"; + clocks = <&disp_clk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00000400>, + <0x00000400 0x00000400 0x00000400>, + <0x00000800 0x00000800 0x00000400>, + <0x00000c00 0x00000c00 0x00000400>, + <0x00001000 0x00001000 0x00001000>; + + target-module@400 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x400 0x4>, + <0x410 0x4>, + <0x414 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x400>; + + dispc: dispc@0 { + compatible = "ti,omap3-dispc"; + reg = <0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&disp_clk>; + clock-names = "fck"; + + max-memory-bandwidth = <230000000>; + }; + }; + + target-module@800 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x800 0x4>, + <0x810 0x4>, + <0x814 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x400>; + + rfbi: rfbi@0 { + compatible = "ti,omap3-rfbi"; + reg = <0 0x100>; + clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>; + clock-names = "fck"; + status = "disabled"; + }; + }; + }; }; target-module@3d000 { /* 0x4833d000, ap 102 6e.0 */ diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi new file mode 100644 index 000000000000..b1c583dee10b --- /dev/null +++ b/arch/arm/boot/dts/am57-pruss.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + * + * Common PRUSS data for TI AM57xx platforms + */ + +&ocp { + pruss1_tm: target-module@4b226000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b226000 0x4>, + <0x4b226004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b200000 0x80000>; + }; + + pruss2_tm: target-module@4b2a6000 { + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x4b2a6000 0x4>, + <0x4b2a6004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */ + clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x4b280000 0x80000>; + }; +}; diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi index d51007c3e8c4..a80c2e3eee2e 100644 --- a/arch/arm/boot/dts/am5718.dtsi +++ b/arch/arm/boot/dts/am5718.dtsi @@ -4,6 +4,7 @@ */ #include "dra72x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5718", "ti,dra7"; diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi index 82e5427ef6a9..9a3810f5adcc 100644 --- a/arch/arm/boot/dts/am5728.dtsi +++ b/arch/arm/boot/dts/am5728.dtsi @@ -4,6 +4,7 @@ */ #include "dra74x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5728", "ti,dra7"; diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi index 5e129759d04a..2b65317b1513 100644 --- a/arch/arm/boot/dts/am5748.dtsi +++ b/arch/arm/boot/dts/am5748.dtsi @@ -4,6 +4,7 @@ */ #include "dra76x.dtsi" +#include "am57-pruss.dtsi" / { compatible = "ti,am5748", "ti,dra762", "ti,dra7"; diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi index 09f3f544f3a7..f61bd59ae5ba 100644 --- a/arch/arm/boot/dts/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi @@ -210,7 +210,7 @@ }; }; - soc: soc@0 { + soc: soc { compatible = "arm,realview-pbx-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi index df0f0cc575c1..bea920b192b6 100644 --- a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi +++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi @@ -17,7 +17,7 @@ }; panel: panel { - compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel"; + compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92"; backlight = <&backlight>; power-supply = <&vcc_lcd_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 9f30132d7d7b..b484745bf2d4 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -645,3 +645,8 @@ &usb2 { status = "okay"; }; + +&watchdog { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 0b9fa2942dff..6b8461278950 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -186,6 +186,11 @@ pinmux = <PIN_PA10__GPIO>; bias-disable; }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA16__GPIO>; + bias-disable; + }; }; &pwm0 { @@ -248,6 +253,13 @@ status = "okay"; }; +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + &usb1 { num-ports = <3>; atmel,vbus-gpio = <0 diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index ba7f3e646c26..1c24ac8019ba 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -180,8 +180,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -198,8 +201,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-1 = <&pinctrl_flx0_gpio>; + sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; status = "okay"; }; @@ -226,8 +232,11 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>; status = "okay"; at24@50 { @@ -244,18 +253,36 @@ bias-disable; }; + pinctrl_flx0_gpio: flx0_gpio { + pinmux = <PIN_PB28__GPIO>, + <PIN_PB29__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PC6__TWD1>, <PIN_PC7__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PC6__GPIO>, + <PIN_PC7__GPIO>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PA10__GPIO>; bias-pull-up; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 9d0a7fbea725..055ee53e4773 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -129,8 +129,11 @@ i2c0: i2c@f8028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0_default>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>; i2c-sda-hold-time-ns = <350>; status = "okay"; @@ -331,8 +334,11 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_flx4_default>; + pinctrl-1 = <&pinctrl_flx4_gpio>; + sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>; atmel,fifo-size = <16>; i2c-analog-filter; i2c-digital-filter; @@ -343,11 +349,14 @@ i2c1: i2c@fc028000 { dmas = <0>, <0>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1_default>; i2c-analog-filter; i2c-digital-filter; i2c-digital-filter-width-ns = <35>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>; status = "okay"; at24@54 { @@ -441,18 +450,36 @@ bias-disable; }; + pinctrl_flx4_gpio: flx4_gpio { + pinmux = <PIN_PD12__GPIO>, + <PIN_PD13__GPIO>; + bias-disable; + }; + pinctrl_i2c0_default: i2c0_default { pinmux = <PIN_PD21__TWD0>, <PIN_PD22__TWCK0>; bias-disable; }; + pinctrl_i2c0_gpio: i2c0_gpio { + pinmux = <PIN_PD21__GPIO>, + <PIN_PD22__GPIO>; + bias-disable; + }; + pinctrl_i2c1_default: i2c1_default { pinmux = <PIN_PD4__TWD1>, <PIN_PD5__TWCK1>; bias-disable; }; + pinctrl_i2c1_gpio: i2c1_gpio { + pinmux = <PIN_PD4__GPIO>, + <PIN_PD5__GPIO>; + bias-disable; + }; + pinctrl_i2s0_default: i2s0_default { pinmux = <PIN_PC1__I2SC0_CK>, <PIN_PC2__I2SC0_MCK>, diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index af4969485c88..4d7cee569ff2 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -136,7 +136,7 @@ panel: panel { /* Actually Ampire 800480R2 */ - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ea5cef0b0974..d36e162a8817 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -238,7 +238,7 @@ }; panel: panel { - compatible = "qiaodian,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi index 7f00c1f57b90..a9278038af3b 100644 --- a/arch/arm/boot/dts/at91sam9x5dm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi @@ -27,7 +27,7 @@ }; panel: panel { - compatible = "foxlink,fl500wvr00-a0t", "simple-panel"; + compatible = "foxlink,fl500wvr00-a0t"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts index efea891b1a76..e26ea9006378 100644 --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts @@ -20,6 +20,7 @@ }; aliases { + emmc2bus = &emmc2bus; ethernet0 = &genet; pcie0 = &pcie0; }; @@ -74,6 +75,79 @@ }; }; +&gpio { + /* + * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and + * the official GPU firmware DT blob. + * + * Legend: + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "ID_SDA", + "ID_SCL", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD1", + "RXD1", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "RGMII_MDIO", + "RGMIO_MDC", + /* Used by BT module */ + "CTS0", + "RTS0", + "TXD0", + "RXD0", + /* Used by Wifi */ + "SD1_CLK", + "SD1_CMD", + "SD1_DATA0", + "SD1_DATA1", + "SD1_DATA2", + "SD1_DATA3", + /* Shared with SPI flash */ + "PWM0_MISO", + "PWM1_MOSI", + "STATUS_LED_G_CLK", + "SPIFLASH_CE_N", + "SDA0", + "SCL0", + "RGMII_RXCLK", + "RGMII_RXCTL", + "RGMII_RXD0", + "RGMII_RXD1", + "RGMII_RXD2", + "RGMII_RXD3", + "RGMII_TXCLK", + "RGMII_TXCTL", + "RGMII_TXD0", + "RGMII_TXD1", + "RGMII_TXD2", + "RGMII_TXD3"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index d1e684d0acfd..a91cf68e3c4c 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -241,17 +241,32 @@ status = "disabled"; }; + hvs@7e400000 { + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + /* + * emmc2 has different DMA constraints based on SoC revisions. It was + * moved into its own bus, so as for RPi4's firmware to update them. + * The firmware will find whether the emmc2bus alias is defined, and if + * so, it'll edit the dma-ranges property below accordingly. + */ + emmc2bus: emmc2bus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>; + dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>; + emmc2: emmc2@7e340000 { compatible = "brcm,bcm2711-emmc2"; - reg = <0x7e340000 0x100>; + reg = <0x0 0x7e340000 0x100>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clocks BCM2711_CLOCK_EMMC2>; status = "disabled"; }; - - hvs@7e400000 { - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; - }; }; arm-pmu { diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi index e5e4d0affefa..f7939f43413b 100644 --- a/arch/arm/boot/dts/dm814x-clocks.dtsi +++ b/arch/arm/boot/dts/dm814x-clocks.dtsi @@ -362,4 +362,18 @@ #clock-cells = <2>; }; }; + + alwon_ethernet_cm: alwon_ethernet_cm@15d4 { + compatible = "ti,omap4-cm"; + reg = <0x15d4 0x4>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x15d4 0x4>; + + alwon_ethernet_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0 0x4>; + #clock-cells = <2>; + }; + }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 95de9f214c14..44ed5a798164 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm814.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/dm814x.h> @@ -519,53 +521,123 @@ reg = <0x47810000 0x1000>; }; - edma: edma@49000000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x49000000 0x10000>; - reg-names = "edma3_cc"; - interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; - - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, - <&edma_tptc2 3>, <&edma_tptc3 0>; - - ti,edma-memcpy-channels = <20 21>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; }; - edma_tptc0: tptc@49800000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x49800000 0x100000>; - interrupts = <112>; - interrupt-names = "edma3_tcerrint"; + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc1: tptc@49900000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x49900000 0x100000>; - interrupts = <113>; - interrupt-names = "edma3_tcerrint"; + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc2: tptc@49a00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc2"; - reg = <0x49a00000 0x100000>; - interrupts = <114>; - interrupt-names = "edma3_tcerrint"; + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc3: tptc@49b00000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc3"; - reg = <0x49b00000 0x100000>; - interrupts = <115>; - interrupt-names = "edma3_tcerrint"; + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; /* See TRM "Table 1-318. L4HS Instance Summary" */ @@ -574,57 +646,73 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0 0x4a000000 0x1b4040>; - }; - /* REVISIT: Move to live under l4hs once driver is fixed */ - mac: ethernet@4a100000 { - compatible = "ti,cpsw"; - ti,hwmods = "cpgmac0"; - clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; - clock-names = "fck", "cpts"; - cpdma_channels = <8>; - ale_entries = <1024>; - bd_ram_size = <0x2000>; - mac_control = <0x20>; - slaves = <2>; - active_slave = <0>; - cpts_clock_mult = <0x80000000>; - cpts_clock_shift = <29>; - reg = <0x4a100000 0x800 - 0x4a100900 0x100>; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - /* - * c0_rx_thresh_pend - * c0_rx_pend - * c0_tx_pend - * c0_misc_pend - */ - interrupts = <40 41 42 43>; - ranges; - syscon = <&scm_conf>; - - davinci_mdio: mdio@4a100800 { - compatible = "ti,davinci_mdio"; + target-module@100000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x100900 0x4>, + <0x100908 0x4>, + <0x100904 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "davinci_mdio"; - bus_freq = <1000000>; - reg = <0x4a100800 0x100>; - }; - - cpsw_emac0: slave@4a100200 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 1>; + #size-cells = <1>; + ranges = <0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0 0x800>, + <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + + davinci_mdio: mdio@800 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x800 0x100>; + }; - }; + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; - cpsw_emac1: slave@4a100300 { - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - phys = <&phy_gmii_sel 2>; + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 1edc2b48b254..2a4934b60ded 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -4,6 +4,8 @@ * kind, whether express or implied. */ +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm816.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/omap.h> @@ -138,13 +140,123 @@ }; }; - edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; - interrupts = <12 13 14>; - #dma-cells = <1>; + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + }; + + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; }; elm: elm@48080000 { @@ -185,7 +297,7 @@ #address-cells = <2>; #size-cells = <1>; interrupts = <100>; - dmas = <&edma 52>; + dmas = <&edma 52 0>; dma-names = "rxtx"; gpmc,num-cs = <6>; gpmc,num-waitpins = <2>; @@ -202,7 +314,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <70>; - dmas = <&edma 58 &edma 59>; + dmas = <&edma 58 0 &edma 59 0>; dma-names = "tx", "rx"; }; @@ -213,7 +325,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <71>; - dmas = <&edma 60 &edma 61>; + dmas = <&edma 60 0 &edma 61 0>; dma-names = "tx", "rx"; }; @@ -311,10 +423,10 @@ interrupts = <65>; ti,spi-num-cs = <4>; ti,hwmods = "mcspi1"; - dmas = <&edma 16 &edma 17 - &edma 18 &edma 19 - &edma 20 &edma 21 - &edma 22 &edma 23>; + dmas = <&edma 16 0 &edma 17 0 + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; }; @@ -324,7 +436,7 @@ reg = <0x48060000 0x11000>; ti,hwmods = "mmc1"; interrupts = <64>; - dmas = <&edma 24 &edma 25>; + dmas = <&edma 24 0 &edma 25 0>; dma-names = "tx", "rx"; }; @@ -392,7 +504,7 @@ reg = <0x48020000 0x2000>; clock-frequency = <48000000>; interrupts = <72>; - dmas = <&edma 26 &edma 27>; + dmas = <&edma 26 0 &edma 27 0>; dma-names = "tx", "rx"; }; @@ -402,7 +514,7 @@ reg = <0x48022000 0x2000>; clock-frequency = <48000000>; interrupts = <73>; - dmas = <&edma 28 &edma 29>; + dmas = <&edma 28 0 &edma 29 0>; dma-names = "tx", "rx"; }; @@ -412,7 +524,7 @@ reg = <0x48024000 0x2000>; clock-frequency = <48000000>; interrupts = <74>; - dmas = <&edma 30 &edma 31>; + dmas = <&edma 30 0 &edma 31 0>; dma-names = "tx", "rx"; }; diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi index d3cbb4ea35a8..cc4878aaa8ea 100644 --- a/arch/arm/boot/dts/dra62x.dtsi +++ b/arch/arm/boot/dts/dra62x.dtsi @@ -12,12 +12,12 @@ /* Compared to dm814x, dra62x has different offsets for Ethernet */ &mac { - reg = <0x4a100000 0x800 - 0x4a101200 0x100>; + reg = <0 0x800>, + <0x1200 0x100>; }; &davinci_mdio { - reg = <0x4a101000 0x100>; + reg = <0x1000 0x100>; }; #include "dra62x-clocks.dtsi" diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 5f5ee16f07a3..4740989ed9c4 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -143,7 +143,7 @@ * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ - ocp { + ocp: ocp { compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -334,43 +334,73 @@ #pinctrl-cells = <2>; }; - edma: edma@43300000 { - compatible = "ti,edma3-tpcc"; - ti,hwmods = "tpcc"; - reg = <0x43300000 0x100000>; - reg-names = "edma3_cc"; - interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "edma3_mperr", - "edma3_ccerrint"; - dma-requests = <64>; - #dma-cells = <2>; + target-module@43300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43300000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43300000 0x100000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x100000>; + reg-names = "edma3_cc"; + interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + + /* + * memcpy is disabled, can be enabled with: + * ti,edma-memcpy-channels = <20 21>; + * for example. Note that these channels need to be + * masked in the xbar as well. + */ + }; + }; - ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>; + target-module@43400000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43400000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43400000 0x100000>; - /* - * memcpy is disabled, can be enabled with: - * ti,edma-memcpy-channels = <20 21>; - * for example. Note that these channels need to be - * masked in the xbar as well. - */ + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; - edma_tptc0: tptc@43400000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc0"; - reg = <0x43400000 0x100000>; - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; - }; + target-module@43500000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x43500000 0x4>; + reg-names = "rev"; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43500000 0x100000>; - edma_tptc1: tptc@43500000 { - compatible = "ti,edma3-tptc"; - ti,hwmods = "tptc1"; - reg = <0x43500000 0x100000>; - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_tcerrint"; + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma3_tcerrint"; + }; }; dmm@4e000000 { @@ -708,44 +738,99 @@ ti,irqs-safe-map = <0>; }; - dss: dss@58000000 { - compatible = "ti,dra7-dss"; - /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ - /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ - status = "disabled"; - ti,hwmods = "dss_core"; - /* CTRL_CORE_DSS_PLL_CONTROL */ - syscon-pll-ctrl = <&scm_conf 0x538>; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,dra7-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - /* CTRL_CORE_SMA_SW_1 */ - syscon-pol = <&scm_conf 0x534>; - }; + ranges = <0 0x58000000 0x800000>; - hdmi: encoder@58060000 { - compatible = "ti,dra7-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + dss: dss@0 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma_xbar 76>; - dma-names = "audio_tx"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,dra7-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,dra7-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma_xbar 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 82b57a35abc0..da334489b18f 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -60,9 +60,9 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1"; clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>, diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index c5abc436ca1f..7b1c61298253 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -132,11 +132,11 @@ }; &dss { - reg = <0x58000000 0x80>, - <0x58004054 0x4>, - <0x58004300 0x20>, - <0x58009054 0x4>, - <0x58009300 0x20>; + reg = <0 0x80>, + <0x4054 0x4>, + <0x4300 0x20>, + <0x9054 0x4>, + <0x9300 0x20>; reg-names = "dss", "pll1_clkctrl", "pll1", "pll2_clkctrl", "pll2"; diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts index 5651ae6dc969..f6eb71553b95 100644 --- a/arch/arm/boot/dts/ecx-2000.dts +++ b/arch/arm/boot/dts/ecx-2000.dts @@ -13,7 +13,6 @@ compatible = "calxeda,ecx-2000"; #address-cells = <2>; #size-cells = <2>; - clock-ranges; cpus { #address-cells = <1>; @@ -83,8 +82,7 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; + #address-cells = <0>; interrupt-controller; interrupts = <1 9 0xf04>; reg = <0xfff11000 0x1000>, @@ -95,7 +93,7 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; }; }; diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi index 66ee1d34f72b..57a028a69373 100644 --- a/arch/arm/boot/dts/ecx-common.dtsi +++ b/arch/arm/boot/dts/ecx-common.dtsi @@ -27,10 +27,11 @@ reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; dma-coherent; - calxeda,port-phys = <&combophy5 0 &combophy0 0 - &combophy0 1 &combophy0 2 - &combophy0 3>; - calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>; + calxeda,port-phys = < &combophy5 0>, <&combophy0 0>, + <&combophy0 1>, <&combophy0 2>, + <&combophy0 3>; + calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>, + <&gpioh 7 1>; calxeda,led-order = <4 0 1 2 3>; }; @@ -114,8 +115,8 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; - clocks = <&pclk>; - clock-names = "apb_pclk"; + clocks = <&pclk>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smic@fff3a000 { @@ -202,14 +203,14 @@ ethernet@fff50000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; dma-coherent; }; ethernet@fff51000 { compatible = "calxeda,hb-xgmac"; reg = <0xfff51000 0x1000>; - interrupts = <0 80 4 0 81 4 0 82 4>; + interrupts = <0 80 4>, <0 81 4>, <0 82 4>; dma-coherent; }; diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi index dee35e3a5c4b..b27a82072365 100644 --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi @@ -23,7 +23,7 @@ memory@40000000 { device_type = "memory"; - reg = <0x40000000 0x1ff00000>; + reg = <0x40000000 0x1f800000>; }; firmware@205f000 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index a1bdf7830a87..9dda6bdb9253 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -115,7 +115,7 @@ gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; lcd@0 { compatible = "samsung,ld9040"; @@ -124,8 +124,6 @@ vci-supply = <&ldo17_reg>; reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; - spi-cpol; - spi-cpha; power-on-delay = <10>; reset-delay = <10>; panel-width-mm = <90>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 9c39e82e4ecb..73d6a71da88d 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -165,6 +165,15 @@ cpu0-supply = <&buck2_reg>; }; +&cpu0_opp_table { + opp-1000000000 { + opp-suspend; + }; + opp-800000000 { + /delete-property/opp-suspend; + }; +}; + &pinctrl_1 { gpio_power_key: power_key { samsung,pins = "gpx1-3"; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index f8ebc620f42d..6904091d4837 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -93,22 +93,23 @@ compatible = "regulator-fixed"; reg = <0>; regulator-name = "MAIN_DC"; + regulator-always-on; }; mmc_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "VDD_33ON_2.8V"; + regulator-name = "VDD_MMC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "hdmi-en"; + regulator-always-on; }; vcc_1v2_reg: regulator@3 { @@ -117,6 +118,7 @@ regulator-name = "VCC_1V2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; vcc_1v8_reg: regulator@4 { @@ -125,6 +127,7 @@ regulator-name = "VCC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; vcc_3v3_reg: regulator@5 { @@ -133,6 +136,7 @@ regulator-name = "VCC_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index ee28d30f5476..e9a09dd0a49b 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -584,6 +584,7 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + regulator-always-on; regulator-state-mem { regulator-on-in-suspend; @@ -697,6 +698,7 @@ regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi index 1b8605cf2407..4b641b9b8179 100644 --- a/arch/arm/boot/dts/exynos5422-cpus.dtsi +++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi @@ -31,6 +31,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu1: cpu@101 { @@ -43,6 +44,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu2: cpu@102 { @@ -55,6 +57,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu3: cpu@103 { @@ -67,6 +70,7 @@ operating-points-v2 = <&cluster_a7_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <539>; + dynamic-power-coefficient = <90>; }; cpu4: cpu@0 { @@ -79,6 +83,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu5: cpu@1 { @@ -91,6 +96,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu6: cpu@2 { @@ -103,6 +109,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; cpu7: cpu@3 { @@ -115,6 +122,7 @@ operating-points-v2 = <&cluster_a15_opp_table>; #cooling-cells = <2>; /* min followed by max */ capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <310>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi index 5cf1aed20490..ab27ff8bc3dc 100644 --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi @@ -901,6 +901,7 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; + regulator-always-on; regulator-state-mem { regulator-off-in-suspend; diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts index f163206265bb..812659260278 100644 --- a/arch/arm/boot/dts/exynos5422-odroidhc1.dts +++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts @@ -215,6 +215,36 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <70000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <85000>; + hysteresis = <10000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&gpu 0 2>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 1865a708b49f..5da2d81e3be2 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -357,6 +357,65 @@ }; }; }; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + gpu_alert0: gpu-alert-0 { + temperature = <50000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert1: gpu-alert-1 { + temperature = <60000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_alert2: gpu-alert-2 { + temperature = <70000>; + hysteresis = <5000>; + type = "active"; + }; + gpu_crit0: gpu-crit-0 { + temperature = <120000>; + hysteresis = <0>; + type = "critical"; + }; + gpu_alert3: gpu-alert-3 { + temperature = <70000>; + hysteresis = <10000>; + type = "passive"; + }; + gpu_alert4: gpu-alert-4 { + temperature = <85000>; + hysteresis = <10000>; + type = "passive"; + }; + }; + cooling-maps { + map0 { + trip = <&gpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&gpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&gpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + map3 { + trip = <&gpu_alert3>; + cooling-device = <&gpu 0 2>; + }; + map4 { + trip = <&gpu_alert4>; + cooling-device = <&gpu 3 6>; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts index e2030ba16512..cc39289e99dd 100644 --- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts +++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts @@ -119,13 +119,11 @@ /* * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM. - * Since the platform has no temperature sensor, this is controlled - * from userspace by using the hard disks S.M.A.R.T. temperature * sensor. It is turned on when the temperature exceeds 46 degrees * and turned off when the temperatures goes below 41 degrees * (celsius). */ - gpio-fan { + fan0: gpio-fan { compatible = "gpio-fan"; /* Collides with IDE */ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -133,6 +131,40 @@ #cooling-cells = <2>; }; + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + /* Use the thermal sensor in the hard drive */ + thermal-sensors = <&drive0>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + alert: chassis-alert { + /* At 43 degrees turn on the fan */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&alert>; + cooling-device = <&fan0 1 1>; + }; + }; + }; + }; + /* * The touchpad input is connected to a GPIO bit-banged * I2C bus. @@ -443,8 +475,18 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; + + /* + * This drive may have a temperature sensor with a + * thermal zone we can use for thermal control of the + * chassis temperature using the fan. + */ + drive0: ide-port@0 { + reg = <0>; + #thermal-sensor-cells = <0>; + }; }; display-controller@6a000000 { diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts index 360642a02a48..c6f3d90e3e90 100644 --- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts +++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts @@ -297,7 +297,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index 521714f38eed..43c45f7e1e0a 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -170,11 +170,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index a98af0351906..a0916d3c1059 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -293,11 +293,11 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; - ata@63400000 { + ide@63400000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts index 239dfacaae4d..0c6e6d35bfaa 100644 --- a/arch/arm/boot/dts/gemini-sq201.dts +++ b/arch/arm/boot/dts/gemini-sq201.dts @@ -289,7 +289,7 @@ }; }; - ata@63000000 { + ide@63000000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index 8cf67b11751f..065ed10a79fa 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -356,7 +356,7 @@ }; }; - ata@63000000 { + ide@63000000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63000000 0x1000>; interrupts = <4 IRQ_TYPE_EDGE_RISING>; @@ -365,9 +365,11 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; - ata@63400000 { + ide@63400000 { compatible = "cortina,gemini-pata", "faraday,ftide010"; reg = <0x63400000 0x1000>; interrupts = <5 IRQ_TYPE_EDGE_RISING>; @@ -376,6 +378,8 @@ clock-names = "PCLK"; sata = <&sata>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; dma-controller@67000000 { diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index f4e4dca6f7e7..b6b0225a769e 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -13,7 +13,6 @@ compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; - clock-ranges; cpus { #address-cells = <1>; @@ -96,7 +95,7 @@ }; }; - memory { + memory@0 { name = "memory"; device_type = "memory"; reg = <0x00000000 0xff900000>; @@ -128,14 +127,12 @@ intc: interrupt-controller@fff11000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; - L2: l2-cache { + L2: cache-controller { compatible = "arm,pl310-cache"; reg = <0xfff12000 0x1000>; interrupts = <0 70 4>; @@ -145,14 +142,14 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 76 4 0 75 4 0 74 4 0 73 4>; + interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>; }; sregs@fff3c200 { compatible = "calxeda,hb-sregs-l2-ecc"; reg = <0xfff3c200 0x100>; - interrupts = <0 71 4 0 72 4>; + interrupts = <0 71 4>, <0 72 4>; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 4c9aafe00b5d..0729e72f2283 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -23,7 +23,7 @@ ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; bus-width = <4>; broken-cd; status = "okay"; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8257630f7a49..c5edff381213 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -267,6 +267,14 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc0_sck_cfg: mmc0-sck-cfg@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_SCK__SSP1_SCK + >; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + mmc1_4bit_pins_a: mmc1-4bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -422,7 +430,7 @@ clocks = <&clks 16>; }; - dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <53 54>; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f4516ccf2c1a..111bfdcbe552 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -82,6 +82,7 @@ #define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000 #define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000 #define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000 +#define MX25_PAD_EB0__CSPI3_SS0 0x040 0x258 0x4bc 0x06 0x000 #define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 #define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 @@ -102,11 +103,13 @@ #define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 #define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000 #define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000 +#define MX25_PAD_CS4__CSPI3_MOSI 0x054 0x264 0x4b8 0x06 0x000 #define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 #define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 #define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 +#define MX25_PAD_CS5__CSPI3_MISO 0x058 0x268 0x4b4 0x06 0x000 #define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 #define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 @@ -114,6 +117,7 @@ #define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 #define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000 #define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000 +#define MX25_PAD_ECB__CSPI3_SCLK 0x060 0x270 0x4ac 0x06 0x000 #define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 #define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 @@ -251,10 +255,12 @@ #define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 +#define MX25_PAD_LD12__KPP_ROW6 0x0f8 0x2f0 0x544 0x04 0x000 #define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001 #define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000 #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 +#define MX25_PAD_LD13__KPP_ROW7 0x0fc 0x2f4 0x548 0x04 0x000 #define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000 #define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000 @@ -512,9 +518,11 @@ #define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000 #define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000 +#define MX25_PAD_FEC_TX_EN__KPP_ROW4 0x1d8 0x3d0 0x53c 0x06 0x000 #define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000 #define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000 +#define MX25_PAD_FEC_RDATA0__KPP_ROW5 0x1dc 0x3d4 0x540 0x06 0x000 #define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000 /* diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 40b95a290bd6..1123e683025c 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -75,7 +75,7 @@ interrupt-parent = <&asic>; ranges; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -332,7 +332,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index f3464cf52e49..002cd223f22d 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -525,7 +525,7 @@ reg = <0x10024600 0x200>; }; - sahara2: sahara@10025000 { + sahara2: crypto@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index 3a184d13887b..c5acc19c982d 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -183,10 +183,20 @@ pinctrl-0 = <&auart2_2pins_a>; status = "okay"; }; + + usbphy1: usbphy@8007e000 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins_a>; + status = "okay"; + }; }; }; ahb@80080000 { + usb1: usb@80090000 { + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index e14d8ef0158b..a1cbbeb39a4f 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -998,7 +998,7 @@ clocks = <&clks 26>; }; - dcp: dcp@80028000 { + dcp: crypto@80028000 { compatible = "fsl,imx28-dcp", "fsl,imx23-dcp"; reg = <0x80028000 0x2000>; interrupts = <52 53 54>; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 6b62f0745b82..18270ec648fe 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -63,7 +63,7 @@ ranges = <0 0x1fffc000 0x4000>; }; - aips@43f00000 { /* AIPS1 */ + bus@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -225,7 +225,7 @@ }; }; - aips@53f00000 { /* AIPS2 */ + bus@53f00000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 9cbdc1a15cda..2ebf2c1fa682 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -66,7 +66,7 @@ cache-level = <2>; }; - aips1: aips@43f00000 { + aips1: bus@43f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,7 +199,7 @@ }; }; - aips2: aips@53f00000 { + aips2: bus@53f00000 { compatible = "fsl,aips", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0bfe7c91d0eb..d325658901c5 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -101,7 +101,7 @@ interrupt-parent = <&tzic>; ranges; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -389,7 +389,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index 3596060f52e7..e559ab0c3645 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -217,8 +217,8 @@ simple-audio-card,widgets = "Headphone", "Headphone Jack"; simple-audio-card,routing = - "Headphone Jack", "HPLEFT", - "Headphone Jack", "HPRIGHT"; + "Headphone Jack", "TPA6130A2 HPLEFT", + "Headphone Jack", "TPA6130A2 HPRIGHT"; simple-audio-card,aux-devs = <&hpa1>; sound_cpu: simple-audio-card,cpu { @@ -470,6 +470,7 @@ compatible = "ti,tpa6130a2"; reg = <0x60>; Vdd-supply = <®_3p3v>; + sound-name-prefix = "TPA6130A2"; }; ds1341: rtc@68 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index dea86b98e9c3..92fbb90bec57 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -104,6 +104,11 @@ #phy-cells = <0>; }; + capture-subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu_di0>, <&ipu_di1>; @@ -143,6 +148,14 @@ clock-names = "bus", "di0", "di1"; resets = <&src 2>; + ipu_csi0: port@0 { + reg = <0>; + }; + + ipu_csi1: port@1 { + reg = <1>; + }; + ipu_di0: port@2 { reg = <2>; @@ -158,7 +171,7 @@ }; }; - aips@70000000 { /* AIPS1 */ + bus@70000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -440,7 +453,7 @@ }; }; - aips@80000000 { /* AIPS2 */ + bus@80000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index ed341cfd9d09..8536f59f59e6 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -222,7 +222,7 @@ clock-names = "core_clk", "mem_iface_clk"; }; - aips@50000000 { /* AIPS1 */ + bus@50000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -654,7 +654,7 @@ }; }; - aips@60000000 { /* AIPS2 */ + bus@60000000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 84fcc203a2e4..65359aece950 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts new file mode 100644 index 000000000000..659a8e8714ea --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts new file mode 100644 index 000000000000..d7403c5c4337 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts new file mode 100644 index 000000000000..b282dbf953aa --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts new file mode 100644 index 000000000000..b7b1c07f96f3 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard"; + compatible = "technexion,imx6dl-pico", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 829654e1835a..065d3ab0f50a 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -89,11 +89,25 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; fsl,err006687-workaround-present; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &gpio1 { diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi index 80ed5f16a76e..2b9423d55c37 100644 --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi @@ -562,6 +562,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_usb_h1_vbus>; + over-current-active-low; status = "disabled"; }; @@ -569,6 +570,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; vbus-supply = <®_usb_otg_vbus>; + over-current-active-low; srp-disable; hnp-disable; adp-disable; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 008312ee0c31..77b65a402e19 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -44,6 +44,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu@1 { @@ -85,8 +87,8 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips1: aips-bus@2000000 { - iomuxc: iomuxc@20e0000 { + aips1: bus@2000000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc"; }; @@ -101,7 +103,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { i2c4: i2c@21f8000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index 4665e15b196d..fab83abb6466 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index a3fa04a97d81..1614b1ae501d 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 5ba49d0f4880..fa9f98dd15ac 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts index 84b30bd6908f..05ee28388229 100644 --- a/arch/arm/boot/dts/imx6q-marsboard.dts +++ b/arch/arm/boot/dts/imx6q-marsboard.dts @@ -111,8 +111,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + phy-handle = <&rgmii_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* Atheros AR8035 PHY */ + rgmii_phy: ethernet-phy@4 { + reg = <4>; + interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <1000>; + }; + }; }; &hdmi { diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts index 61347a545d6c..69f170ff31c5 100644 --- a/arch/arm/boot/dts/imx6q-novena.dts +++ b/arch/arm/boot/dts/imx6q-novena.dts @@ -107,7 +107,7 @@ }; panel: panel { - compatible = "innolux,n133hse-ea1", "simple-panel"; + compatible = "innolux,n133hse-ea1"; backlight = <&backlight>; }; diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts new file mode 100644 index 000000000000..618d2743e1e9 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts new file mode 100644 index 000000000000..7a666507b456 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-hobbit.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts new file mode 100644 index 000000000000..fe5a7becc9e5 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts new file mode 100644 index 000000000000..9413f0a68f54 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-pico-pi.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-pico-pi.dtsi" + +/ { + model = "TechNexion PICO-IMX6 Quad Board and PI baseboard"; + compatible = "technexion,imx6q-pico", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 9d3be1cc6b64..78a4d64929f3 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -49,6 +49,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -164,7 +166,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ spba-bus@2000000 { ecspi5: spi@2018000 { #address-cells = <1>; @@ -181,7 +183,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6q-iomuxc"; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 347a5edc6927..e34be8fabd93 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2017 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index d03dff23863d..6e3c6b4925a7 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014-2016 Toradex AG + * Copyright 2014-2020 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 1a9a9d98f284..60563ff0b7ce 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -313,6 +313,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 54b2beadd7a2..8942bec65c5c 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -304,6 +304,11 @@ interrupts = <11 2>; wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 1b6c1331c220..c40583dbd96d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -361,6 +361,11 @@ interrupts = <12 2>; wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; }; + + accel@1e { + compatible = "nxp,fxos8700"; + reg = <0x1e>; + }; }; &ldb { diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi index a1066897be18..ee85031c3916 100644 --- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi @@ -173,6 +173,25 @@ pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + magn@1c { + compatible = "st,lsm9ds1-magn"; + reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mag>; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + + imu@6a { + compatible = "st,lsm9ds1-imu"; + reg = <0x6a>; + st,drdy-int-pin = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio7>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + }; + ltc3676: pmic@3c { compatible = "lltc,ltc3676"; reg = <0x3c>; @@ -426,6 +445,12 @@ >; }; + pinctrl_imu: imugrp { + fsl,pins = < + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + >; + }; + pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 @@ -449,6 +474,12 @@ >; }; + pinctrl_mag: maggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index be1af7482f89..30fe47ff64a4 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -220,6 +220,14 @@ status = "okay"; }; +/* cc1352 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + /* Sterling-LWB Bluetooth */ &uart4 { pinctrl-names = "default"; @@ -411,6 +419,23 @@ >; }; + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */ + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */ + MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */ + MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */ + >; + }; + pinctrl_uart4: uart4grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi index 77d871340eb7..41ebe4599e43 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi @@ -88,7 +88,7 @@ reg = <0x50>; }; - pmic@58 { + pmic: pmic@58 { compatible = "dlg,da9062"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic>; @@ -96,6 +96,8 @@ interrupt-parent = <&gpio1>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + gpio-controller; + #gpio-cells = <2>; da9062_rtc: rtc { compatible = "dlg,da9062-rtc"; @@ -107,6 +109,7 @@ watchdog { compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; }; regulators { diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi new file mode 100644 index 000000000000..3a968782e854 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi new file mode 100644 index 000000000000..144c4727fbc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c2 { + status = "okay"; + + adc081c: adc@50 { + compatible = "ti,adc081c"; + reg = <0x50>; + vref-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi new file mode 100644 index 000000000000..3d56a4216448 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&i2c1 { + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + io-expander@25 { + compatible = "nxp,pca9554"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; +}; + +&i2c3 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&pcie { + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi new file mode 100644 index 000000000000..b823dce62e63 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Copyright 2017 NXP + +#include "imx6qdl-pico.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&hdmi { + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi new file mode 100644 index 000000000000..39dfd90c2c6b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi @@ -0,0 +1,617 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +// +// Copyright 2018 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> + +#include <dt-bindings/gpio/gpio.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_1p5v: regulator-1p5v { + compatible = "regulator-fixed"; + regulator-name = "1P5V"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + reg_2p8v: regulator-2p8v { + compatible = "regulator-fixed"; + regulator-name = "2P8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; + + codec_osc: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-pico-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 50000 0>; + brightness-levels = <0 36 72 108 144 180 216 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lcd_display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + power-supply = <®_lcd_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii-id"; + phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + #sound-dai-cells = <0>; + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&codec_osc>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_1p8v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio5>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + wakeup-source; + }; + + camera@3c { + compatible = "ovti,ov5645"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5645>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "xclk"; + clock-frequency = <24000000>; + vdddo-supply = <®_1p8v>; + vdda-supply = <®_2p8v>; + vddd-supply = <®_1p5v>; + enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + + port { + ov5645_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5645_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_reset>; + reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { /* Bluetooth module */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc2 { /* Wifi/BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x4001b0b5 /* PICO_P24 */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x4001b0b5 /* PICO_P26 */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x4001b0b5 /* PICO_P28 */ + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b0b5 /* PICO_P30 */ + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b0b5 /* PICO_P32 */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x4001b0b5 /* PICO_P34 */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x4001b0b5 /* PICO_P42 */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x4001b0b5 /* PICO_P44 */ + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x4001b0b5 /* PICO_P48 */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x000f0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x1b0b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x1b0b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000f0b0 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x000f0b0 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1f0b1 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu1: ipu1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ov5645: ov5645grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + MX6QDL_PAD_GPIO_3__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_pcie_reset: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x130b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_reg_lcd: reglcdgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x17071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi index 44a97ba93a95..352ac585ca6b 100644 --- a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi @@ -153,6 +153,7 @@ bus-width = <4>; keep-power-in-suspend; mmc-pwrseq = <&pwrseq_ti_wifi>; + cap-power-off-card; non-removable; vmmc-supply = <&vcc_3v3>; /* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */ diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 0075637f9b0b..20350e803377 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -216,6 +216,13 @@ }; }; +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>; +}; + &cpu0 { fsl,soc-operating-points = < /* ARM kHz SOC-PU uV */ diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e6b4b8525f98..47982889d774 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -294,7 +294,7 @@ status = "disabled"; }; - aips-bus@2000000 { /* AIPS1 */ + bus@2000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -574,7 +574,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -661,7 +661,7 @@ #interrupt-cells = <2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -669,14 +669,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -684,7 +684,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -908,7 +908,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6dl-iomuxc", "fsl,imx6q-iomuxc"; reg = <0x20e0000 0x4000>; }; @@ -935,14 +935,14 @@ }; }; - aips-bus@2100000 { /* AIPS2 */ + bus@2100000 { /* AIPS2 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -954,13 +954,13 @@ <&clks IMX6QDL_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1161,10 +1161,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; tzasc@21d0000 { /* TZASC1 */ diff --git a/arch/arm/boot/dts/imx6qp.dtsi b/arch/arm/boot/dts/imx6qp.dtsi index 5f51f8e5c1fa..93b89dc1f53b 100644 --- a/arch/arm/boot/dts/imx6qp.dtsi +++ b/arch/arm/boot/dts/imx6qp.dtsi @@ -18,7 +18,7 @@ clocks = <&clks IMX6QDL_CLK_OCRAM>; }; - aips-bus@2100000 { + bus@2100000 { pre1: pre@21c8000 { compatible = "fsl,imx6qp-pre"; reg = <0x021c8000 0x1000>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 59c54e6ad09a..8230b45057a1 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -74,6 +74,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -143,7 +145,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -380,7 +382,7 @@ clock-names = "ipg", "per"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sl-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; @@ -491,7 +493,7 @@ <&iomuxc 21 161 1>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; @@ -499,14 +501,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -514,7 +516,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sl-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>, @@ -728,7 +730,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sl-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -777,7 +779,7 @@ power-domains = <&pd_disp>; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, @@ -786,7 +788,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -949,10 +951,16 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SL_CLK_OCOTP>; + #address-cells = <1>; + #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; audmux: audmux@21d8000 { diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi index a1bc5bb31756..edd3abb9a9f1 100644 --- a/arch/arm/boot/dts/imx6sll.dtsi +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -72,6 +72,8 @@ <&clks IMX6SLL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -144,7 +146,7 @@ arm,data-latency = <4 2 3>; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -652,7 +654,7 @@ status = "disabled"; }; - dcp: dcp@20fc000 { + dcp: crypto@20fc000 { compatible = "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -791,6 +793,10 @@ reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SLL_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 832b5c5d7441..d84ea6999377 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -484,31 +484,31 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; pinctrl_uart3: uart3grp { fsl,pins = < - MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x1b0b1 - MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x1b0b1 + MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x1b0b1 + MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x1b0b1 - MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x1b0b1 + MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h index aa194a2fdd53..0b02c7e60c17 100644 --- a/arch/arm/boot/dts/imx6sx-pinfunc.h +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -42,8 +42,8 @@ #define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX 0x0024 0x036C 0x0830 0x0 0x0 #define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0 @@ -51,8 +51,8 @@ #define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x0028 0x0370 0x0830 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX 0x0028 0x0370 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0 #define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0 @@ -60,21 +60,23 @@ #define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX 0x002C 0x0374 0x0838 0x0 0x0 #define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1 #define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0 #define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_DTE_CTS 0x002C 0x0374 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1 -#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x0030 0x0378 0x0838 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX 0x0030 0x0378 0x0000 0x0 0x0 #define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 #define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 #define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS 0x0030 0x0378 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_DTE_RTS 0x0030 0x0378 0x082C 0x4 0x1 #define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 @@ -83,7 +85,8 @@ #define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0 #define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1 -#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__UART2_DTE_CTS 0x0034 0x037C 0x0000 0x4 0x0 #define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0 @@ -92,7 +95,8 @@ #define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 #define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 #define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 -#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS 0x0038 0x0380 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_DTE_RTS 0x0038 0x0380 0x0834 0x4 0x1 #define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 #define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 #define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 @@ -177,8 +181,8 @@ #define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1 #define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0 #define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0 -#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x005C 0x03A4 0x0858 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_DTE_TX 0x005C 0x03A4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0 @@ -188,8 +192,8 @@ #define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1 #define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1 #define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0 -#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1 -#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_DTE_RX 0x0060 0x03A8 0x0858 0x4 0x1 #define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0 @@ -199,7 +203,8 @@ #define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1 #define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2 #define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0 -#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_DTE_CTS 0x0064 0x03AC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0 @@ -209,7 +214,8 @@ #define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 #define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 #define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 -#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x0068 0x03B0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_DTE_RTS 0x0068 0x03B0 0x0854 0x4 0x1 #define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 #define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 @@ -218,7 +224,8 @@ #define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0 #define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1 #define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1 -#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__UART4_DTE_CTS 0x006C 0x03B4 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0 @@ -228,8 +235,8 @@ #define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0 #define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1 #define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2 -#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_MCLK__UART4_DCE_RX 0x0070 0x03B8 0x0848 0x3 0x2 +#define MX6SX_PAD_CSI_MCLK__UART4_DTE_TX 0x0070 0x03B8 0x0000 0x3 0x0 #define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0 @@ -239,8 +246,8 @@ #define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0 #define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1 #define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0 -#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3 -#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX 0x0074 0x03BC 0x0848 0x3 0x3 #define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0 @@ -250,7 +257,8 @@ #define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 #define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 #define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 -#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS 0x0078 0x03C0 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_VSYNC__UART4_DTE_RTS 0x0078 0x03C0 0x0844 0x3 0x3 #define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 #define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 #define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 @@ -330,8 +338,8 @@ #define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1 -#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2 -#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_COL__UART1_DCE_RX 0x0094 0x03DC 0x0830 0x3 0x2 +#define MX6SX_PAD_ENET2_COL__UART1_DTE_TX 0x0094 0x03DC 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3 #define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1 @@ -341,8 +349,8 @@ #define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2 #define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1 -#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3 -#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DCE_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__UART1_DTE_RX 0x0098 0x03E0 0x0830 0x3 0x3 #define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1 #define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1 @@ -352,7 +360,8 @@ #define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0 #define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0 #define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1 -#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_DTE_CTS 0x009C 0x03E4 0x0000 0x3 0x0 #define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1 #define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1 @@ -362,7 +371,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 #define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 #define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 -#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS 0x00A0 0x03E8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_DTE_RTS 0x00A0 0x03E8 0x082C 0x3 0x3 #define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 #define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 #define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 @@ -371,7 +381,8 @@ #define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0 #define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DCE_RTS 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__UART6_DTE_CTS 0x00A4 0x03EC 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0 #define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0 #define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0 @@ -380,8 +391,8 @@ #define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2 -#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DCE_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_DTE_RX 0x00A8 0x03F0 0x0858 0x2 0x2 #define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0 #define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0 #define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0 @@ -389,7 +400,8 @@ #define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0 #define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1 -#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__UART5_DTE_CTS 0x00AC 0x03F4 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0 @@ -397,8 +409,8 @@ #define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2 -#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_DTE_RX 0x00B0 0x03F8 0x0850 0x2 0x2 #define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0 #define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0 #define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0 @@ -414,7 +426,8 @@ #define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 #define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS 0x00B8 0x0400 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_DTE_RTS 0x00B8 0x0400 0x0854 0x2 0x3 #define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 #define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 #define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 @@ -423,8 +436,8 @@ #define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3 -#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW1__UART6_DCE_RX 0x00BC 0x0404 0x0858 0x2 0x3 +#define MX6SX_PAD_KEY_ROW1__UART6_DTE_TX 0x00BC 0x0404 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0 #define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0 #define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0 @@ -433,7 +446,8 @@ #define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 #define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 -#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x00C0 0x0408 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW2__UART5_DTE_RTS 0x00C0 0x0408 0x084C 0x2 0x3 #define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 #define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 #define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 @@ -441,8 +455,8 @@ #define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0 #define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0 #define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0 -#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3 -#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x00C4 0x040C 0x0850 0x2 0x3 +#define MX6SX_PAD_KEY_ROW3__UART5_DTE_TX 0x00C4 0x040C 0x0000 0x2 0x0 #define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1 #define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1 #define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0 @@ -815,7 +829,8 @@ #define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_DTE_CTS 0x0160 0x04A8 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0 #define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0 @@ -825,7 +840,8 @@ #define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS 0x0164 0x04AC 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_DTE_RTS 0x0164 0x04AC 0x083C 0x3 0x1 #define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 #define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 @@ -835,8 +851,8 @@ #define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0 -#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DCE_RX 0x0168 0x04B0 0x0840 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_DTE_TX 0x0168 0x04B0 0x0000 0x3 0x0 #define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0 @@ -846,8 +862,8 @@ #define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0 #define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0 #define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0 -#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1 -#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DCE_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_DTE_RX 0x016C 0x04B4 0x0840 0x3 0x1 #define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0 #define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0 #define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0 @@ -967,7 +983,8 @@ #define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 #define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS 0x01A0 0x04E8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_DTE_RTS 0x01A0 0x04E8 0x083C 0x1 0x4 #define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 @@ -975,7 +992,8 @@ #define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_DTE_CTS 0x01A4 0x04EC 0x0000 0x1 0x0 #define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1 #define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2 #define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1 @@ -1007,8 +1025,8 @@ #define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4 -#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0 #define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 #define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 #define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 @@ -1016,8 +1034,8 @@ #define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0 #define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0 #define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5 -#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX 0x01B8 0x0500 0x0840 0x1 0x5 #define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1 #define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3 #define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1 @@ -1224,8 +1242,8 @@ #define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1 #define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2 -#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA0__UART2_DCE_RX 0x0228 0x0570 0x0838 0x4 0x2 +#define MX6SX_PAD_SD1_DATA0__UART2_DTE_TX 0x0228 0x0570 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0 @@ -1235,8 +1253,8 @@ #define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1 #define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3 -#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DCE_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_DTE_RX 0x022C 0x0574 0x0838 0x4 0x3 #define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0 @@ -1246,7 +1264,8 @@ #define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 #define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 #define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS 0x0230 0x0578 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_DTE_RTS 0x0230 0x0578 0x0834 0x4 0x2 #define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 @@ -1255,7 +1274,8 @@ #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1 #define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2 #define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0 -#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__UART2_DTE_CTS 0x0234 0x057C 0x0000 0x4 0x0 #define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0 #define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0 #define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2 @@ -1287,8 +1307,8 @@ #define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3 #define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4 -#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA0__UART4_DCE_RX 0x0240 0x0588 0x0848 0x7 0x4 +#define MX6SX_PAD_SD2_DATA0__UART4_DTE_TX 0x0240 0x0588 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0 @@ -1298,8 +1318,8 @@ #define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3 #define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5 -#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DCE_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_DTE_RX 0x0244 0x058C 0x0848 0x7 0x5 #define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0 @@ -1309,8 +1329,8 @@ #define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2 #define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0 -#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4 -#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA2__UART6_DCE_RX 0x0248 0x0590 0x0858 0x7 0x4 +#define MX6SX_PAD_SD2_DATA2__UART6_DTE_TX 0x0248 0x0590 0x0000 0x7 0x0 #define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0 #define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0 @@ -1320,12 +1340,13 @@ #define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2 #define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0 #define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4 -#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5 -#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DCE_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__UART6_DTE_RX 0x024C 0x0594 0x0858 0x7 0x5 #define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 #define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DCE_CTS 0x0250 0x0598 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_DTE_RTS 0x0250 0x0598 0x0844 0x1 0x0 #define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 #define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 #define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 @@ -1334,8 +1355,8 @@ #define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0 #define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0 -#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DCE_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_DTE_RX 0x0254 0x059C 0x0848 0x1 0x0 #define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0 #define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0 #define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1 @@ -1364,7 +1385,8 @@ #define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__UART4_DTE_CTS 0x0260 0x05A8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0 #define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0 #define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0 @@ -1374,8 +1396,8 @@ #define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0 #define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0 #define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0 -#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1 -#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA3__UART4_DCE_RX 0x0264 0x05AC 0x0848 0x1 0x1 +#define MX6SX_PAD_SD3_DATA3__UART4_DTE_TX 0x0264 0x05AC 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0 #define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0 #define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0 @@ -1387,8 +1409,8 @@ #define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0 #define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0 -#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2 -#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x0268 0x05B0 0x0840 0x3 0x2 +#define MX6SX_PAD_SD3_DATA4__UART3_DTE_TX 0x0268 0x05B0 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0 @@ -1398,8 +1420,8 @@ #define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3 -#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_DTE_RX 0x026C 0x05B4 0x0840 0x3 0x3 #define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0 @@ -1409,7 +1431,8 @@ #define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0 #define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0 -#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__UART3_DTE_CTS 0x0270 0x05B8 0x0000 0x3 0x0 #define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0 @@ -1419,7 +1442,8 @@ #define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 #define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 #define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 -#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x0274 0x05BC 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_DTE_RTS 0x0274 0x05BC 0x083C 0x3 0x3 #define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 #define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 #define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 @@ -1488,8 +1512,8 @@ #define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0 -#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x0290 0x05D8 0x0850 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_DTE_TX 0x0290 0x05D8 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0 #define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0 @@ -1499,8 +1523,8 @@ #define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1 -#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_DTE_RX 0x0294 0x05DC 0x0850 0x2 0x1 #define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0 #define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0 @@ -1510,7 +1534,8 @@ #define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_DTE_CTS 0x0298 0x05E0 0x0000 0x2 0x0 #define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0 #define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0 @@ -1520,7 +1545,8 @@ #define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 #define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 #define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 -#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS 0x029C 0x05E4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_DTE_RTS 0x029C 0x05E4 0x084C 0x2 0x1 #define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 #define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 #define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 @@ -1551,4 +1577,92 @@ #define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0 #define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0 +/* these are not supposed to be used any more and remove them after some time */ +#define MX6SX_PAD_GPIO1_IO04__UART1_RX MX6SX_PAD_GPIO1_IO04__UART1_DTE_RX +#define MX6SX_PAD_GPIO1_IO04__UART1_TX MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX +#define MX6SX_PAD_GPIO1_IO05__UART1_RX MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX +#define MX6SX_PAD_GPIO1_IO05__UART1_TX MX6SX_PAD_GPIO1_IO05__UART1_DTE_TX +#define MX6SX_PAD_GPIO1_IO06__UART2_RX MX6SX_PAD_GPIO1_IO06__UART2_DTE_RX +#define MX6SX_PAD_GPIO1_IO06__UART2_TX MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX +#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B MX6SX_PAD_GPIO1_IO06__UART1_DCE_RTS +#define MX6SX_PAD_GPIO1_IO07__UART2_RX MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX +#define MX6SX_PAD_GPIO1_IO07__UART2_TX MX6SX_PAD_GPIO1_IO07__UART2_DTE_TX +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B MX6SX_PAD_GPIO1_IO07__UART1_DCE_CTS +#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B MX6SX_PAD_GPIO1_IO08__UART2_DCE_RTS +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B MX6SX_PAD_GPIO1_IO09__UART2_DCE_CTS +#define MX6SX_PAD_CSI_DATA04__UART6_RX MX6SX_PAD_CSI_DATA04__UART6_DCE_RX +#define MX6SX_PAD_CSI_DATA04__UART6_TX MX6SX_PAD_CSI_DATA04__UART6_DTE_TX +#define MX6SX_PAD_CSI_DATA05__UART6_RX MX6SX_PAD_CSI_DATA05__UART6_DTE_RX +#define MX6SX_PAD_CSI_DATA05__UART6_TX MX6SX_PAD_CSI_DATA05__UART6_DCE_TX +#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS +#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B MX6SX_PAD_CSI_HSYNC__UART4_DCE_RTS +#define MX6SX_PAD_CSI_MCLK__UART4_RX MX6SX_PAD_CSI_MCLK__UART4_DCE_RX +#define MX6SX_PAD_CSI_MCLK__UART4_TX MX6SX_PAD_CSI_MCLK__UART4_DTE_TX +#define MX6SX_PAD_CSI_PIXCLK__UART4_RX MX6SX_PAD_CSI_PIXCLK__UART4_DTE_RX +#define MX6SX_PAD_CSI_PIXCLK__UART4_TX MX6SX_PAD_CSI_PIXCLK__UART4_DCE_TX +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B MX6SX_PAD_CSI_VSYNC__UART4_DCE_CTS +#define MX6SX_PAD_ENET2_COL__UART1_RX MX6SX_PAD_ENET2_COL__UART1_DCE_RX +#define MX6SX_PAD_ENET2_COL__UART1_TX MX6SX_PAD_ENET2_COL__UART1_DTE_TX +#define MX6SX_PAD_ENET2_CRS__UART1_RX MX6SX_PAD_ENET2_CRS__UART1_DTE_RX +#define MX6SX_PAD_ENET2_CRS__UART1_TX MX6SX_PAD_ENET2_CRS__UART1_DCE_TX +#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B MX6SX_PAD_ENET2_RX_CLK__UART1_DCE_RTS +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B MX6SX_PAD_ENET2_TX_CLK__UART1_DCE_CTS +#define MX6SX_PAD_KEY_COL0__UART6_RTS_B MX6SX_PAD_KEY_COL0__UART6_DCE_RTS +#define MX6SX_PAD_KEY_COL1__UART6_RX MX6SX_PAD_KEY_COL1__UART6_DTE_RX +#define MX6SX_PAD_KEY_COL1__UART6_TX MX6SX_PAD_KEY_COL1__UART6_DCE_TX +#define MX6SX_PAD_KEY_COL2__UART5_RTS_B MX6SX_PAD_KEY_COL2__UART5_DCE_RTS +#define MX6SX_PAD_KEY_COL3__UART5_RX MX6SX_PAD_KEY_COL3__UART5_DTE_RX +#define MX6SX_PAD_KEY_COL3__UART5_TX MX6SX_PAD_KEY_COL3__UART5_DCE_TX +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B MX6SX_PAD_KEY_ROW0__UART6_DCE_CTS +#define MX6SX_PAD_KEY_ROW1__UART6_RX MX6SX_PAD_KEY_ROW1__UART6_DCE_RX +#define MX6SX_PAD_KEY_ROW1__UART6_TX MX6SX_PAD_KEY_ROW1__UART6_DTE_TX +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS +#define MX6SX_PAD_KEY_ROW3__UART5_RX MX6SX_PAD_KEY_ROW3__UART5_DCE_RX +#define MX6SX_PAD_KEY_ROW3__UART5_TX MX6SX_PAD_KEY_ROW3__UART5_DTE_TX +#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B MX6SX_PAD_NAND_DATA04__UART3_DCE_RTS +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B MX6SX_PAD_NAND_DATA05__UART3_DCE_CTS +#define MX6SX_PAD_NAND_DATA06__UART3_RX MX6SX_PAD_NAND_DATA06__UART3_DCE_RX +#define MX6SX_PAD_NAND_DATA06__UART3_TX MX6SX_PAD_NAND_DATA06__UART3_DTE_TX +#define MX6SX_PAD_NAND_DATA07__UART3_RX MX6SX_PAD_NAND_DATA07__UART3_DTE_RX +#define MX6SX_PAD_NAND_DATA07__UART3_TX MX6SX_PAD_NAND_DATA07__UART3_DCE_TX +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B MX6SX_PAD_QSPI1B_DATA0__UART3_DCE_CTS +#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B MX6SX_PAD_QSPI1B_DATA1__UART3_DCE_RTS +#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX +#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX MX6SX_PAD_QSPI1B_SS0_B__UART3_DTE_RX +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX MX6SX_PAD_QSPI1B_SS0_B__UART3_DCE_TX +#define MX6SX_PAD_SD1_DATA0__UART2_RX MX6SX_PAD_SD1_DATA0__UART2_DCE_RX +#define MX6SX_PAD_SD1_DATA0__UART2_TX MX6SX_PAD_SD1_DATA0__UART2_DTE_TX +#define MX6SX_PAD_SD1_DATA1__UART2_RX MX6SX_PAD_SD1_DATA1__UART2_DTE_RX +#define MX6SX_PAD_SD1_DATA1__UART2_TX MX6SX_PAD_SD1_DATA1__UART2_DCE_TX +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B MX6SX_PAD_SD1_DATA2__UART2_DCE_CTS +#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B MX6SX_PAD_SD1_DATA3__UART2_DCE_RTS +#define MX6SX_PAD_SD2_DATA0__UART4_RX MX6SX_PAD_SD2_DATA0__UART4_DCE_RX +#define MX6SX_PAD_SD2_DATA0__UART4_TX MX6SX_PAD_SD2_DATA0__UART4_DTE_TX +#define MX6SX_PAD_SD2_DATA1__UART4_RX MX6SX_PAD_SD2_DATA1__UART4_DTE_RX +#define MX6SX_PAD_SD2_DATA1__UART4_TX MX6SX_PAD_SD2_DATA1__UART4_DCE_TX +#define MX6SX_PAD_SD2_DATA2__UART6_RX MX6SX_PAD_SD2_DATA2__UART6_DCE_RX +#define MX6SX_PAD_SD2_DATA2__UART6_TX MX6SX_PAD_SD2_DATA2__UART6_DTE_TX +#define MX6SX_PAD_SD2_DATA3__UART6_RX MX6SX_PAD_SD2_DATA3__UART6_DTE_RX +#define MX6SX_PAD_SD2_DATA3__UART6_TX MX6SX_PAD_SD2_DATA3__UART6_DCE_TX +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B MX6SX_PAD_SD3_CLK__UART4_DCE_CTS +#define MX6SX_PAD_SD3_CMD__UART4_RX MX6SX_PAD_SD3_CMD__UART4_DTE_RX +#define MX6SX_PAD_SD3_CMD__UART4_TX MX6SX_PAD_SD3_CMD__UART4_DCE_TX +#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B MX6SX_PAD_SD3_DATA2__UART4_DCE_RTS +#define MX6SX_PAD_SD3_DATA3__UART4_RX MX6SX_PAD_SD3_DATA3__UART4_DCE_RX +#define MX6SX_PAD_SD3_DATA3__UART4_TX MX6SX_PAD_SD3_DATA3__UART4_DTE_TX +#define MX6SX_PAD_SD3_DATA4__UART3_RX MX6SX_PAD_SD3_DATA4__UART3_DCE_RX +#define MX6SX_PAD_SD3_DATA4__UART3_TX MX6SX_PAD_SD3_DATA4__UART3_DTE_TX +#define MX6SX_PAD_SD3_DATA5__UART3_RX MX6SX_PAD_SD3_DATA5__UART3_DTE_RX +#define MX6SX_PAD_SD3_DATA5__UART3_TX MX6SX_PAD_SD3_DATA5__UART3_DCE_TX +#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS +#define MX6SX_PAD_SD4_DATA4__UART5_RX MX6SX_PAD_SD4_DATA4__UART5_DCE_RX +#define MX6SX_PAD_SD4_DATA4__UART5_TX MX6SX_PAD_SD4_DATA4__UART5_DTE_TX +#define MX6SX_PAD_SD4_DATA5__UART5_RX MX6SX_PAD_SD4_DATA5__UART5_DTE_RX +#define MX6SX_PAD_SD4_DATA5__UART5_TX MX6SX_PAD_SD4_DATA5__UART5_DCE_TX +#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B MX6SX_PAD_SD4_DATA6__UART5_DCE_RTS +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B MX6SX_PAD_SD4_DATA7__UART5_DCE_CTS + #endif /* __DTS_IMX6SX_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 315044ccd65f..825924448ab4 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -229,8 +229,8 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index f6972deb5e39..3e5fb72f21fc 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -564,17 +564,17 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart5: uart5grp { fsl,pins = < - MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 - MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 - MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 - MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + MX6SX_PAD_KEY_ROW3__UART5_DCE_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_DCE_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_DCE_CTS 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_DCE_RTS 0x1b0b1 >; }; diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts index 28563f21024e..6b728b03f1f2 100644 --- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts +++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts @@ -352,6 +352,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x10b0 + >; + }; + pinctrl_pwm1: pwm1grp-1 { fsl,pins = < /* blue LED */ @@ -384,15 +390,15 @@ pinctrl_uart1: uart1grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1 >; }; pinctrl_uart2: uart2grp { fsl,pins = < - MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 - MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1 >; }; @@ -490,6 +496,14 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + reset-gpio-active-high; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi index 25d4aa985a69..ee645655090d 100644 --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi @@ -235,28 +235,28 @@ pinctrl_uart1: uart1grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX 0x1b0b1>; }; pinctrl_uart2: uart2grp { fsl,pins = - <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, - <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + <MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX 0x1b0b1>; }; pinctrl_uart3: uart3grp { fsl,pins = - <MX6SX_PAD_SD3_DATA4__UART3_RX 0x13059>, - <MX6SX_PAD_SD3_DATA5__UART3_TX 0x13059>, - <MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x13059>, - <MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x13059>; + <MX6SX_PAD_SD3_DATA4__UART3_DCE_RX 0x13059>, + <MX6SX_PAD_SD3_DATA5__UART3_DCE_TX 0x13059>, + <MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS 0x13059>, + <MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS 0x13059>; }; pinctrl_uart5: uart5grp { fsl,pins = - <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, - <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + <MX6SX_PAD_SD4_DATA4__UART5_DCE_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_DCE_TX 0x1b0b1>; }; pinctrl_uart6: uart6grp { @@ -265,10 +265,10 @@ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, - <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, - <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + <MX6SX_PAD_CSI_DATA04__UART6_DCE_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_DCE_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS 0x1b0b1>; }; pinctrl_otg1_reg: otg1grp { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 59bad60a47dc..d6f831731460 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -87,6 +87,8 @@ "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -235,7 +237,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -466,7 +468,7 @@ status = "disabled"; }; - gpt: gpt@2098000 { + gpt: timer@2098000 { compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +561,7 @@ gpio-ranges = <&iomuxc 0 148 10>, <&iomuxc 10 169 2>; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -567,14 +569,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_IPG>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -582,7 +584,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6sx-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -806,7 +808,7 @@ }; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6sx-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -830,14 +832,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2100000 { + crypto: crypto@2100000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -850,13 +852,13 @@ <&clks IMX6SX_CLK_EIM_SLOW>; clock-names = "mem", "aclk", "ipg", "emi_slow"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; @@ -1051,13 +1053,17 @@ status = "disabled"; }; - ocotp: ocotp@21bc000 { + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,imx6sx-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6SX_CLK_OCOTP>; + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; + tempmon_calib: calib@38 { reg = <0x38 4>; }; @@ -1188,7 +1194,7 @@ }; }; - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1289,7 +1295,7 @@ status = "disabled"; }; - wdog3: wdog@2288000 { + wdog3: watchdog@2288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; reg = <0x02288000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts index 3749fdda3611..5d3805b07032 100644 --- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts @@ -25,7 +25,7 @@ }; panel { - compatible = "auo,g101evn010", "simple-panel"; + compatible = "auo,g101evn010"; power-supply = <&ldo4_ext>; backlight = <&lcd_backlight>; diff --git a/arch/arm/boot/dts/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts new file mode 100644 index 000000000000..162dc259edc8 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-pico-dwarf.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx6ul-pico.dtsi" +/ { + model = "TechNexion PICO-IMX6UL and DWARF baseboard"; + compatible = "technexion,imx6ul-pico-dwarf", "fsl,imx6ul"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6ul-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi index de9f83189ba8..df1da98ab10f 100644 --- a/arch/arm/boot/dts/imx6ul-pico.dtsi +++ b/arch/arm/boot/dts/imx6ul-pico.dtsi @@ -20,7 +20,7 @@ stdout-path = &uart6; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm3 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -72,6 +72,17 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <200000>; }; + + panel { + compatible = "vxt,vl050-8048nt-c01"; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; }; &can1 { @@ -154,31 +165,11 @@ &lcdif { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>; - display = <&display0>; status = "okay"; - display0: display0 { - bits-per-pixel = <32>; - bus-width = <24>; - - display-timings { - native-mode = <&timing0>; - - timing0: timing0 { - clock-frequency = <33200000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <46>; - hsync-len = <1>; - vback-porch = <22>; - vfront-porch = <23>; - vsync-len = <1>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index d9fdca12819b..2ccf67c4ac1a 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -204,7 +204,7 @@ status = "disabled"; }; - aips1: aips-bus@2000000 { + aips1: bus@2000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -430,7 +430,7 @@ status = "disabled"; }; - gpt1: gpt@2098000 { + gpt1: timer@2098000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x02098000 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -523,7 +523,7 @@ status = "disabled"; }; - kpp: kpp@20b8000 { + kpp: keypad@20b8000 { compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -531,14 +531,14 @@ status = "disabled"; }; - wdog1: wdog@20bc000 { + wdog1: watchdog@20bc000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6UL_CLK_WDOG1>; }; - wdog2: wdog@20c0000 { + wdog2: watchdog@20c0000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -546,7 +546,7 @@ status = "disabled"; }; - clks: ccm@20c4000 { + clks: clock-controller@20c4000 { compatible = "fsl,imx6ul-ccm"; reg = <0x020c4000 0x4000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, @@ -693,7 +693,7 @@ interrupt-parent = <&intc>; }; - iomuxc: iomuxc@20e0000 { + iomuxc: pinctrl@20e0000 { compatible = "fsl,imx6ul-iomuxc"; reg = <0x020e0000 0x4000>; }; @@ -704,7 +704,7 @@ reg = <0x020e4000 0x4000>; }; - gpt2: gpt@20e8000 { + gpt2: timer@20e8000 { compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt"; reg = <0x020e8000 0x4000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -771,14 +771,14 @@ }; }; - aips2: aips-bus@2100000 { + aips2: bus@2100000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x02100000 0x100000>; ranges; - crypto: caam@2140000 { + crypto: crypto@2140000 { compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -789,19 +789,19 @@ <&clks IMX6UL_CLK_CAAM_MEM>; clock-names = "ipg", "aclk", "mem"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr2@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; @@ -1007,7 +1007,7 @@ status = "disabled"; }; - wdog3: wdog@21e4000 { + wdog3: watchdog@21e4000 { compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt"; reg = <0x021e4000 0x4000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index b7e67d121322..fcde7f77ae42 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -51,7 +51,7 @@ / { soc { - aips3: aips-bus@2200000 { + aips3: bus@2200000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi new file mode 100644 index 000000000000..9fa701bec2ec --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + + +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiokeys>; + + power { + label = "Wake-Up"; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + compatible = "edt,et057090dhu"; + backlight = <&bl>; + power-supply = <®_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; + +&adc1 { + status = "okay"; +}; + +/* + * ADC2 is not available on the Aster board and + * conflicts with AD7879 resistive touchscreen. + */ +&adc2 { + status = "disabled"; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + power-supply = <®_3v3>; + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* Microchip/Atmel maxtouch controller */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiotouch>; + reg = <0x4a>; + interrupt-parent = <&gpio2>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 */ + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* SODIMM 106 */ + }; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpiotouch: touchgpios { + fsl,pins = < + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 + >; + }; +}; + +&lcdif { + status = "okay"; + + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + keep-power-in-suspend; + no-1-8-v; + wakeup-source; + vmmc-supply = <®_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi index 6aa123cbdadb..97601375f264 100644 --- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -1,46 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi index 04717cf69db0..e18e89dec879 100644 --- a/arch/arm/boot/dts/imx7-colibri.dtsi +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ / { @@ -130,6 +93,184 @@ status = "disabled"; }; +&gpio1 { + gpio-line-names = "SODIMM_43", + "SODIMM_45", + "SODIMM_135", + "SODIMM_22", + "", + "", + "SODIMM_37", + "SODIMM_29", + "SODIMM_59", + "SODIMM_28", + "SODIMM_30", + "SODIMM_67", + "", + "", + "SODIMM_188", + "SODIMM_178"; +}; + +&gpio2 { + gpio-line-names = "SODIMM_111", + "SODIMM_113", + "SODIMM_115", + "SODIMM_117", + "SODIMM_119", + "SODIMM_121", + "SODIMM_123", + "SODIMM_125", + "SODIMM_91", + "SODIMM_89", + "SODIMM_105", + "SODIMM_152", + "SODIMM_150", + "SODIMM_95", + "SODIMM_126", + "SODIMM_107", + "SODIMM_114", + "SODIMM_116", + "SODIMM_118", + "SODIMM_120", + "SODIMM_122", + "SODIMM_124", + "SODIMM_127", + "SODIMM_130", + "SODIMM_132", + "SODIMM_134", + "SODIMM_133", + "SODIMM_104", + "SODIMM_106", + "SODIMM_110", + "SODIMM_112", + "SODIMM_128"; +}; + +&gpio3 { + gpio-line-names = "SODIMM_56", + "SODIMM_44", + "SODIMM_68", + "SODIMM_82", + "SODIMM_93", + "SODIMM_76", + "SODIMM_70", + "SODIMM_60", + "SODIMM_58", + "SODIMM_78", + "SODIMM_72", + "SODIMM_80", + "SODIMM_46", + "SODIMM_62", + "SODIMM_48", + "SODIMM_74", + "SODIMM_50", + "SODIMM_52", + "SODIMM_54", + "SODIMM_66", + "SODIMM_64", + "SODIMM_57", + "SODIMM_61", + "SODIMM_136", + "SODIMM_138", + "SODIMM_140", + "SODIMM_142", + "SODIMM_144", + "SODIMM_146"; +}; + +&gpio4 { + gpio-line-names = "SODIMM_35", + "SODIMM_33", + "SODIMM_38", + "SODIMM_36", + "SODIMM_21", + "SODIMM_19", + "SODIMM_131", + "SODIMM_129", + "SODIMM_90", + "SODIMM_92", + "SODIMM_88", + "SODIMM_86", + "SODIMM_81", + "SODIMM_94", + "SODIMM_96", + "SODIMM_75", + "SODIMM_101", + "SODIMM_103", + "SODIMM_79", + "SODIMM_97", + "SODIMM_67", + "SODIMM_59", + "SODIMM_85", + "SODIMM_65"; +}; + +&gpio5 { + gpio-line-names = "SODIMM_69", + "SODIMM_71", + "SODIMM_73", + "SODIMM_47", + "SODIMM_190", + "SODIMM_192", + "SODIMM_49", + "SODIMM_51", + "SODIMM_53", + "", + "", + "SODIMM_98", + "SODIMM_184", + "SODIMM_186", + "SODIMM_23", + "SODIMM_31", + "SODIMM_100", + "SODIMM_102"; +}; + +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "", + "", + "", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + +&gpio7 { + gpio-line-names = "", + "", + "SODIMM_63", + "SODIMM_55", + "", + "", + "", + "", + "SODIMM_196", + "SODIMM_194", + "", + "SODIMM_99", + "", + "", + "SODIMM_137"; +}; + &gpmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpmi_nand>; @@ -345,7 +486,7 @@ &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4 - &pinctrl_gpio7>; + &pinctrl_gpio7 &pinctrl_usbc_det>; pinctrl_gpio1: gpio1-grp { fsl,pins = < @@ -356,7 +497,6 @@ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x74 /* SODIMM 105 */ - MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x74 /* SODIMM 107 */ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ @@ -373,7 +513,6 @@ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ - MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x74 /* SODIMM 106 */ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ @@ -450,7 +589,6 @@ pinctrl_enet1: enet1grp { fsl,pins = < - MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 @@ -648,6 +786,12 @@ >; }; + pinctrl_usbc_det: gpio-usbc-det { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + >; + }; + pinctrl_usbh_reg: gpio-usbh-vbus { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 7646284e13a7..89267cd59037 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -85,12 +85,12 @@ pmic: pmic@8 { compatible = "fsl,pfuze3000"; - reg = <0x08>; + reg = <0x8>; regulators { sw1a_reg: sw1a { regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1475000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; diff --git a/arch/arm/boot/dts/imx7d-colibri-aster.dts b/arch/arm/boot/dts/imx7d-colibri-aster.dts new file mode 100644 index 000000000000..f3f0537d5a37 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-aster", "toradex,colibri-imx7d", + "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts new file mode 100644 index 000000000000..20480276cb0e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-emmc-aster.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7d-colibri-emmc.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7D 1GB (eMMC) on Aster Carrier Board"; + compatible = "toradex,colibri-imx7d-emmc-aster", + "toradex,colibri-imx7d-emmc", "fsl,imx7d"; +}; + +&usbotg2 { + vbus-supply = <®_usbh_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi index 898f4b8d7421..af39e5370fa1 100644 --- a/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri-emmc.dtsi @@ -13,6 +13,32 @@ }; }; +&gpio6 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SODIMM_169", + "SODIMM_157", + "", + "SODIMM_163", + "SODIMM_77", + "SODIMM_24", + "", + "SODIMM_25", + "SODIMM_27", + "SODIMM_32", + "SODIMM_34"; +}; + &usbotg2 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index 136e11ab4893..87b132bcd272 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi index e2e327f437e3..c59d72e50920 100644 --- a/arch/arm/boot/dts/imx7d-colibri.dtsi +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7d.dtsi" diff --git a/arch/arm/boot/dts/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/imx7d-pico-dwarf.dts new file mode 100644 index 000000000000..5162fe227d1e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-dwarf.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7D and DWARF baseboard"; + compatible = "technexion,imx7d-pico-dwarf", "fsl,imx7d"; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&i2c4 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9554: io-expander@25 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0x25>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio2>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&pca9554 4 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; +}; + +&iomuxc { + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-pico-nymph.dts b/arch/arm/boot/dts/imx7d-pico-nymph.dts new file mode 100644 index 000000000000..104a85254adb --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pico-nymph.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2015 Technexion Ltd. +// +// Author: Wig Cheng <wig.cheng@technexion.com> +// Richard Hu <richard.hu@technexion.com> +// Tapani Utriainen <tapani@technexion.com> +/dts-v1/; + +#include "imx7d-pico.dtsi" +/ { + model = "TechNexion PICO-IMX7 and NYMPH baseboard"; + compatible = "technexion,imx7d-pico-nymph", "fsl,imx7d"; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led { + label = "gpio-led"; + gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx7d-sgtl5000"; + audio-cpu = <&sai1>; + audio-codec = <&sgtl5000>; + audio-routing = + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + }; + + sys_mclk: clock-sys-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&i2c1 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: audio-codec@a { + reg = <0x0a>; + compatible = "fsl,sgtl5000"; + clocks = <&sys_mclk>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; +}; + +&i2c2 { + clock_frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-aster.dts b/arch/arm/boot/dts/imx7s-colibri-aster.dts new file mode 100644 index 000000000000..fca4e0a95c1b --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-aster.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2017-2020 Toradex AG + * + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-aster.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Aster Carrier Board"; + compatible = "toradex,colibri-imx7s-aster", "toradex,colibri-imx7s", + "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts index bd2a49c1ade6..aa70d3f2e2e2 100644 --- a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi index 6d16e32aed89..94de220a5965 100644 --- a/arch/arm/boot/dts/imx7s-colibri.dtsi +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2016 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2016-2020 Toradex */ #include "imx7s.dtsi" diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 568d7a984aa6..76e3ffbbbfbf 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -315,7 +315,7 @@ <0x31006000 0x2000>; }; - aips1: aips-bus@30000000 { + aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -406,14 +406,14 @@ gpio-ranges = <&iomuxc 0 139 16>; }; - wdog1: wdog@30280000 { + wdog1: watchdog@30280000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; }; - wdog2: wdog@30290000 { + wdog2: watchdog@30290000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x30290000 0x10000>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -421,7 +421,7 @@ status = "disabled"; }; - wdog3: wdog@302a0000 { + wdog3: watchdog@302a0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302a0000 0x10000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -429,7 +429,7 @@ status = "disabled"; }; - wdog4: wdog@302b0000 { + wdog4: watchdog@302b0000 { compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; reg = <0x302b0000 0x10000>; interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +443,7 @@ fsl,input-sel = <&iomuxc>; }; - gpt1: gpt@302d0000 { + gpt1: timer@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; @@ -452,7 +452,7 @@ clock-names = "ipg", "per"; }; - gpt2: gpt@302e0000 { + gpt2: timer@302e0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -462,7 +462,7 @@ status = "disabled"; }; - gpt3: gpt@302f0000 { + gpt3: timer@302f0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -472,7 +472,7 @@ status = "disabled"; }; - gpt4: gpt@30300000 { + gpt4: timer@30300000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; @@ -482,7 +482,7 @@ status = "disabled"; }; - kpp: kpp@30320000 { + kpp: keypad@30320000 { compatible = "fsl,imx7d-kpp", "fsl,imx21-kpp"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; @@ -490,7 +490,7 @@ status = "disabled"; }; - iomuxc: iomuxc@30330000 { + iomuxc: pinctrl@30330000 { compatible = "fsl,imx7d-iomuxc"; reg = <0x30330000 0x10000>; }; @@ -606,13 +606,15 @@ compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_SNVS_CLK>; + clock-names = "snvs-pwrkey"; linux,keycode = <KEY_POWER>; wakeup-source; status = "disabled"; }; }; - clks: ccm@30380000 { + clks: clock-controller@30380000 { compatible = "fsl,imx7d-ccm"; reg = <0x30380000 0x10000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, @@ -663,7 +665,7 @@ }; }; - aips2: aips-bus@30400000 { + aips2: bus@30400000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -803,7 +805,7 @@ }; }; - aips3: aips-bus@30800000 { + aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -932,7 +934,7 @@ }; }; - crypto: caam@30900000 { + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; @@ -943,19 +945,19 @@ <&clks IMX7D_AHB_CHANNEL_ROOT_CLK>; clock-names = "ipg", "aclk"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr2: jr1@3000 { + sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts index a863a2b337d6..eff51e113db4 100644 --- a/arch/arm/boot/dts/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/imx7ulp-evk.dts @@ -72,7 +72,7 @@ srp-disable; hnp-disable; adp-disable; - over-current-active-low; + disable-over-current; status = "okay"; }; @@ -110,7 +110,6 @@ pinctrl_usbotg1_id: otg1idgrp { fsl,pins = < IMX7ULP_PAD_PTC13__USB0_ID 0x10003 - IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 >; }; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index ab91c98f2124..f7c4878534c8 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -132,13 +132,13 @@ <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; clock-names = "aclk", "ipg"; - sec_jr0: jr0@1000 { + sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; }; - sec_jr1: jr1@2000 { + sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index 94d2ff9836d0..198d66181c50 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -9,7 +9,6 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; - dma-ranges = <0x80000000 0x0 0x80000000>; cpus { #address-cells = <1>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index 51e1305c6471..2093b38d6e6d 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -148,7 +148,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt2701-scpsys", "syscon"; #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index a79f0b6c3429..f76b4a3c34b9 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -268,7 +268,7 @@ reg = <0 0x10005000 0 0x1000>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys", "syscon"; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 867b88103b9d..5cbb3d244c75 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -90,7 +90,7 @@ #clock-cells = <1>; }; - scpsys: scpsys@10006000 { + scpsys: power-controller@10006000 { compatible = "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys"; #power-domain-cells = <1>; @@ -241,6 +241,20 @@ status = "disabled"; }; + pwm: pwm@11006000 { + compatible = "mediatek,mt7629-pwm"; + reg = <0x11006000 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM_PD>, + <&pericfg CLK_PERI_PWM1_PD>; + clock-names = "top", "main", "pwm1"; + assigned-clocks = <&topckgen CLK_TOP_PWM_SEL>; + assigned-clock-parents = + <&topckgen CLK_TOP_UNIVPLL2_D4>; + status = "disabled"; + }; + i2c: i2c@11007000 { compatible = "mediatek,mt7629-i2c", "mediatek,mt2712-i2c"; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index 459fd7027591..ef59e4e97d7c 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1529,6 +1529,7 @@ }; }; + /* Unused DSS L4 access, see L3 instead */ target-module@40000 { /* 0x48040000, ap 13 0a.0 */ compatible = "ti,sysc"; status = "disabled"; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 9a87440d0b9d..763bdea8c829 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -108,7 +108,6 @@ dsp { compatible = "ti,omap3-c64"; - ti,hwmods = "dsp"; }; iva { @@ -415,87 +414,213 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap4-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + /* + * DSS is only using l3 mapping without l4 as noted in the TRM + * "10.1.3 DSS Register Manual" for omap4460. + */ + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; - - dispc@58001000 { - compatible = "ti,omap4-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap4-rfbi"; - reg = <0x58002000 0x1000>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; - clock-names = "fck", "ick"; - }; + ranges = <0 0x58000000 0x1000000>; - venc: encoder@58003000 { - compatible = "ti,omap4-venc"; - reg = <0x58003000 0x1000>; + dss: dss@0 { + compatible = "ti,omap4-dss"; + reg = <0 0x80>; status = "disabled"; - ti,hwmods = "dss_venc"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap4-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap4-dsi"; - reg = <0x58005000 0x200>, - <0x58005200 0x40>, - <0x58005300 0x20>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58006000 { - compatible = "ti,omap4-hdmi"; - reg = <0x58006000 0x200>, - <0x58006200 0x100>, - <0x58006300 0x100>, - <0x58006400 0x1000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, - <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap4-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>; + clock-names = "fck", "ick"; + }; + }; + + target-module@3000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x3000 0x4>; + reg-names = "rev"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "sys_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x3000 0x1000>; + + venc: encoder@0 { + compatible = "ti,omap4-venc"; + reg = <0 0x1000>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>; + clock-names = "fck"; + }; + }; + + target-module@4000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4000 0x4>, + <0x4010 0x4>, + <0x4014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap4-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x20>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + }; + }; + + target-module@6000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x6000 0x4>, + <0x6010 0x4>; + reg-names = "rev", "sysc"; + /* + * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP + * but HDMI audio will fail with them. + */ + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x6000 0x2000>; + + hdmi: encoder@0 { + compatible = "ti,omap4-hdmi"; + reg = <0 0x200>, + <0x200 0x100>, + <0x300 0x100>, + <0x400 0x1000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>, + <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi index 4ec7909df78b..bafd6adf9f45 100644 --- a/arch/arm/boot/dts/omap5-l4-abe.dtsi +++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi @@ -426,8 +426,20 @@ }; target-module@f1000 { /* 0x401f1000, ap 32 20.0 */ - compatible = "ti,sysc"; - status = "disabled"; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0xf1000 0x4>, + <0xf1010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + /* Domains (V, P, C): iva, abe_pwrdm, abe_clkdm */ + clocks = <&abe_clkctrl OMAP5_AESS_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xf1000 0x1000>, diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a7562d3deb1a..2ac7f021c284 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -293,78 +293,185 @@ */ }; - dss: dss@58000000 { - compatible = "ti,omap5-dss"; - reg = <0x58000000 0x80>; - status = "disabled"; - ti,hwmods = "dss_core"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; - clock-names = "fck"; + target-module@58000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x58000000 4>, + <0x58000014 4>; + reg-names = "rev", "syss"; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 11>; + clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0 0x58000000 0x1000000>; - dispc@58001000 { - compatible = "ti,omap5-dispc"; - reg = <0x58001000 0x1000>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dss_dispc"; + dss: dss@0 { + compatible = "ti,omap5-dss"; + reg = <0 0x80>; + status = "disabled"; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; - }; - - rfbi: encoder@58002000 { - compatible = "ti,omap5-rfbi"; - reg = <0x58002000 0x100>; - status = "disabled"; - ti,hwmods = "dss_rfbi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; - clock-names = "fck", "ick"; - }; - - dsi1: encoder@58004000 { - compatible = "ti,omap5-dsi"; - reg = <0x58004000 0x200>, - <0x58004200 0x40>, - <0x58004300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi1"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - dsi2: encoder@58005000 { - compatible = "ti,omap5-dsi"; - reg = <0x58009000 0x200>, - <0x58009200 0x40>, - <0x58009300 0x40>; - reg-names = "proto", "phy", "pll"; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_dsi2"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - }; - - hdmi: encoder@58060000 { - compatible = "ti,omap5-hdmi"; - reg = <0x58040000 0x200>, - <0x58040200 0x80>, - <0x58040300 0x80>, - <0x58060000 0x19000>; - reg-names = "wp", "pll", "phy", "core"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - ti,hwmods = "dss_hdmi"; - clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; - clock-names = "fck", "sys_clk"; - dmas = <&sdma 76>; - dma-names = "audio_tx"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x1000000>; + + target-module@1000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x1000 0x4>, + <0x1010 0x4>, + <0x1014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000 0x1000>; + + dispc@0 { + compatible = "ti,omap5-dispc"; + reg = <0 0x1000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@2000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x2000 0x4>, + <0x2010 0x4>, + <0x2014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + rfbi: encoder@0 { + compatible = "ti,omap5-rfbi"; + reg = <0 0x100>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>, <&l3_iclk_div>; + clock-names = "fck", "ick"; + }; + }; + + target-module@5000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x5000 0x4>, + <0x5010 0x4>, + <0x5014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5000 0x1000>; + + dsi1: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@9000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x9000 0x4>, + <0x9010 0x4>, + <0x9014 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY | + SYSC_OMAP2_ENAWAKEUP | + SYSC_OMAP2_SOFTRESET | + SYSC_OMAP2_AUTOIDLE)>; + ti,syss-mask = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x9000 0x1000>; + + dsi2: encoder@0 { + compatible = "ti,omap5-dsi"; + reg = <0 0x200>, + <0x200 0x40>, + <0x300 0x40>; + reg-names = "proto", "phy", "pll"; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck"; + }; + }; + + target-module@40000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; + clock-names = "fck", "dss_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x40000 0x40000>; + + hdmi: encoder@0 { + compatible = "ti,omap5-hdmi"; + reg = <0 0x200>, + <0x200 0x80>, + <0x300 0x80>, + <0x20000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>; + clock-names = "fck", "sys_clk"; + dmas = <&sdma 76>; + dma-names = "audio_tx"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 8b79b4112ee1..2687c4e890ba 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -350,6 +350,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm_pinmux 0 0 90>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fa1852eed37b..bf6a03506b45 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -403,6 +403,7 @@ compatible = "qcom,apq8084-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 147>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 71bb25a8afc0..bfa9ce4c6e69 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -201,6 +201,7 @@ compatible = "qcom,ipq4019-pinctrl"; reg = <0x01000000 0x300000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 100>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 16c0da97932c..4021f661cd11 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -119,6 +119,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&qcom_pinmux 0 0 69>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index 356e9535f7a6..347b4f7d7889 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -128,6 +128,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,mdm9615-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 88>; #gpio-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index ec5cbc468bd3..480fc08cbe8e 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -115,6 +115,7 @@ reg = <0x800000 0x4000>; gpio-controller; + gpio-ranges = <&tlmm 0 0 173>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index f2aeaccdc1ad..172ea3c70eac 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -107,6 +107,7 @@ msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; + gpio-ranges = <&msmgpio 0 0 152>; #gpio-cells = <2>; interrupts = <0 16 0x4>; interrupt-controller; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 3487daf98e81..32b474bfeec3 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -12,6 +12,7 @@ aliases { serial0 = &blsp1_uart1; + serial1 = &blsp2_uart10; }; chosen { @@ -355,6 +356,57 @@ bias-disable; }; }; + + bt_pin: bt { + hostwake { + pins = "gpio42"; + function = "gpio"; + }; + + devwake { + pins = "gpio62"; + function = "gpio"; + }; + + shutdown { + pins = "gpio41"; + function = "gpio"; + }; + }; + + blsp2_uart10_pin_a: blsp2-uart10-pin-active { + tx { + pins = "gpio53"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio54"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + cts { + pins = "gpio55"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-pull-up; + }; + + rts { + pins = "gpio56"; + function = "blsp_uart10"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -418,6 +470,25 @@ }; }; + serial@f9960000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart10_pin_a>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_pin>; + + host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>; + }; + }; + i2c@f9967000 { status = "ok"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index 450b8321e0a6..611bae9fe66b 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -260,6 +260,31 @@ }; &soc { + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + sdhci@f9824900 { status = "ok"; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 4b161b809dd5..2ea2308d91b3 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -715,6 +715,15 @@ status = "disabled"; }; + blsp2_uart10: serial@f9960000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf9960000 0x1000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + sdhci@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -925,6 +934,7 @@ compatible = "qcom,msm8974-pinctrl"; reg = <0xfd510000 0x4000>; gpio-controller; + gpio-ranges = <&msmgpio 0 0 146>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/r7s72100-gr-peach.dts b/arch/arm/boot/dts/r7s72100-gr-peach.dts index fe1a4aa4d7cb..2562cc9b5356 100644 --- a/arch/arm/boot/dts/r7s72100-gr-peach.dts +++ b/arch/arm/boot/dts/r7s72100-gr-peach.dts @@ -41,6 +41,9 @@ bank-width = <4>; device-width = <1>; + clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index 75b2796ebfca..0a567d8ebc66 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -467,11 +467,12 @@ #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0xfcfe0438 4>; - clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>, <&b_clk>, <&b_clk>; clock-indices = < R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + R7S72100_CLK_SPIBSC0 R7S72100_CLK_SPIBSC1 >; - clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3", "spibsc0", "spibsc1"; }; mstp10_clks: mstp10_clks@fcfe043c { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index a5351ddbf506..b088e8e351d5 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -157,11 +157,8 @@ &cpu0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1950000 1115000 - 1462500 995000 - >; + operating-points = <1950000 1115000>, /* kHz uV */ + <1462500 995000>; voltage-tolerance = <1>; /* 1% */ }; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index 1cd19a569bd0..e8b340bb99bc 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -1669,9 +1669,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 1c82dd0abd76..def840b8b2d3 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -1655,9 +1655,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index 2aeebfc9e4f1..92aa26ba423c 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -108,6 +108,12 @@ }; }; +&lcd_panel { + status = "disabled"; + + /delete-node/ port; +}; + &pfc { can1_pins: can1 { groups = "can1_data_b"; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 58d369ad8279..b15b1b088a32 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -30,6 +30,7 @@ /dts-v1/; #include "r8a7745-iwg22m.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "iWave Systems RainboW-G22D-SODIMM board based on RZ/G1E"; @@ -78,6 +79,49 @@ gpios-states = <1>; states = <3300000 1>, <1800000 0>; }; + + vccq_panel: regulator-vccq-panel { + compatible = "regulator-fixed"; + regulator-name = "Panel VccQ"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 13 GPIO_ACTIVE_LOW>; + enable-active-high; + }; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&tpu 3 5000000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + + lcd_panel: lcd { + compatible = "edt,etm043080dh6gp"; + power-supply = <&vccq_panel>; + backlight = <&backlight_lcd>; + + port { + lcd_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&lcd_in>; + }; + }; + }; }; &avb { @@ -127,6 +171,39 @@ status = "okay"; clock-frequency = <400000>; + stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; #sound-dai-cells = <0>; @@ -149,11 +226,21 @@ function = "avb"; }; + backlight_pins: backlight { + groups = "tpu_to3_c"; + function = "tpu"; + }; + can0_pins: can0 { groups = "can0_data"; function = "can0"; }; + du0_pins: du0 { + groups = "du0_rgb666", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + hscif1_pins: hscif1 { groups = "hscif1_data", "hscif1_ctrl"; function = "hscif1"; @@ -229,6 +316,12 @@ shared-pin; }; +&tpu { + pinctrl-0 = <&backlight_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 3f88a7e34af2..7ab58d8bb740 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -1506,11 +1506,12 @@ du: display@feb00000 { compatible = "renesas,du-r8a7745"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 6efcef1670e1..f55153192276 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -942,9 +942,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 097fd9317c6e..69745def44d4 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -674,6 +674,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index a315ba749aa4..4138efb2766d 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -203,6 +203,7 @@ interrupt-parent = <&irqc0>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 334ba19769b9..e5ef9fd4284a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1719,6 +1719,8 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>; clock-names = "du.0", "du.1", "du.2"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 2b096d5e06fb..687167b70cb6 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -633,6 +633,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index f9ece7ab2010..a8e0335148a5 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -307,6 +307,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 59a55e87fcc6..6e5bd86731cd 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1681,9 +1681,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index 39af16caa2ae..4627eefa502b 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -852,9 +852,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 22ca7cd1e7d2..cfe06a74ce89 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -591,6 +591,7 @@ interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index eef035c4d983..dadbda16161b 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -1341,9 +1341,10 @@ reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 724>, - <&cpg CPG_MOD 723>; + clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index f79fce74cd9c..935935c1dbac 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -343,6 +343,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 2c16ad854300..9aaa96ea9943 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -394,6 +394,7 @@ interrupt-parent = <&irqc0>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; + reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 05ef79c6ed7f..2c9e7a1ebfec 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -1356,6 +1356,8 @@ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; + resets = <&cpg 724>; + reset-names = "du.0"; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts index fb3cf005cc90..2ff9f152d29b 100644 --- a/arch/arm/boot/dts/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rk3036-kylin.dts @@ -319,7 +319,7 @@ bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; - default-sample-phase = <90>; + rockchip,default-sample-phase = <90>; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index cf36e25195b4..781ac7583522 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -54,7 +54,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -101,7 +101,7 @@ #clock-cells = <0>; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -263,7 +263,7 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; dma-names = "rx-tx"; @@ -281,8 +281,6 @@ compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; reg = <0x10220000 0x4000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; dmas = <&pdma 0>, <&pdma 1>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 3d1b02f45ffd..b599394d149d 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -156,14 +156,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x10118000 0x2000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 4>, <&dmac1_s 5>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <8>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -174,14 +172,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -192,14 +188,12 @@ compatible = "rockchip,rk3066-i2s"; reg = <0x1011c000 0x2000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 9>, <&dmac1_s 10>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts index ad1afd403052..66a0ff196eb1 100644 --- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts +++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts @@ -58,20 +58,25 @@ lvds-encoder { compatible = "ti,sn75lvds83", "lvds-encoder"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - lvds_in_vop0: endpoint { - remote-endpoint = <&vop0_out_lvds>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lvds_in_vop0: endpoint { + remote-endpoint = <&vop0_out_lvds>; + }; }; - }; - port@1 { - reg = <1>; - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; }; }; }; @@ -465,7 +470,7 @@ non-removable; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; - vmmcq-supply = <&vccio_wl>; + vqmmc-supply = <&vccio_wl>; #address-cells = <1>; #size-cells = <0>; status = "okay"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 10ede65d90f3..2298a8d840ba 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -166,14 +166,12 @@ compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s"; reg = <0x1011a000 0x2000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac1_s 6>, <&dmac1_s 7>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; #sound-dai-cells = <0>; @@ -184,8 +182,8 @@ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; reg = <0x1011e000 0x2000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; dmas = <&dmac1_s 8>; dma-names = "tx"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 4e90efdc9630..06172ebbf0ce 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -95,7 +95,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -152,8 +152,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; dmas = <&pdma 14>, <&pdma 15>; @@ -167,8 +165,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100c0000 0x4000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; dmas = <&pdma 11>, <&pdma 12>; @@ -193,8 +189,6 @@ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100e0000 0x4000>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; clock-names = "i2s_clk", "i2s_hclk"; clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; dmas = <&pdma 0>, <&pdma 1>; @@ -698,7 +692,7 @@ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; bus-width = <8>; - default-sample-phase = <158>; + rockchip,default-sample-phase = <158>; fifo-depth = <0x100>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; @@ -718,7 +712,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy0_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -729,7 +722,6 @@ reg = <0x30080000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -740,7 +732,6 @@ reg = <0x300a0000 0x20000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy0>; - clock-names = "usbhost", "utmi"; phys = <&u2phy0_host>; phy-names = "usb"; status = "disabled"; @@ -751,7 +742,6 @@ reg = <0x300c0000 0x20000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -762,7 +752,6 @@ reg = <0x300e0000 0x20000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST1>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_otg>; phy-names = "usb"; status = "disabled"; @@ -775,7 +764,6 @@ clocks = <&cru HCLK_HOST2>, <&u2phy1>; phys = <&u2phy1_host>; phy-names = "usb"; - clock-names = "usbhost", "utmi"; status = "disabled"; }; @@ -784,7 +772,6 @@ reg = <0x30120000 0x20000>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST2>, <&u2phy1>; - clock-names = "usbhost", "utmi"; phys = <&u2phy1_host>; phy-names = "usb"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 80080767c365..be695b8c1f67 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB ACT8846"; compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; vcc_lcd: vcc-lcd { diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index 16788209625b..42384ea4ca21 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -4,6 +4,7 @@ #include "rk3288-evb.dtsi" / { + model = "Rockchip RK3288 EVB RK808"; compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; }; diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts index 1574383fd2dc..8c38bda21a7c 100644 --- a/arch/arm/boot/dts/rk3288-firefly-reload.dts +++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts @@ -234,6 +234,7 @@ }; &saradc { + vref-supply = <&vcc_18>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts index a6ffc381abaa..a258c7ae5329 100644 --- a/arch/arm/boot/dts/rk3288-r89.dts +++ b/arch/arm/boot/dts/rk3288-r89.dts @@ -9,6 +9,7 @@ #include "rk3288.dtsi" / { + model = "Netxeon R89"; compatible = "netxeon,r89", "rockchip,rk3288"; memory@0 { diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 312582c1bd37..acfaa12ec239 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -276,6 +276,7 @@ }; vccio_sd: LDO_REG5 { + regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts index ba06e9f97ddc..385dd59393e1 100644 --- a/arch/arm/boot/dts/rk3288-vyasa.dts +++ b/arch/arm/boot/dts/rk3288-vyasa.dts @@ -78,6 +78,18 @@ vin-supply = <&vcc_io>; }; + vcc50_hdmi: vcc50-hdmi { + compatible = "regulator-fixed"; + regulator-name = "vcc50_hdmi"; + enable-active-high; + gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */ + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsus_5v>; + }; + vusb1_5v: vusb1-5v { compatible = "regulator-fixed"; regulator-name = "vusb1_5v"; @@ -150,7 +162,7 @@ }; &hdmi { - ddc-i2c-bus = <&i2c2>; + ddc-i2c-bus = <&i2c5>; status = "okay"; }; @@ -286,15 +298,15 @@ }; }; - vcc10_lcd: LDO_REG6 { - regulator-name = "vcc10_lcd"; + vdd10_lcd: LDO_REG6 { + regulator-name = "vdd10_lcd"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; + regulator-suspend-microvolt = <1000000>; }; }; @@ -347,7 +359,7 @@ }; }; -&i2c2 { +&i2c5 { status = "okay"; }; @@ -446,6 +458,12 @@ }; }; + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 9beb662166aa..0cd88774db95 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -155,7 +155,7 @@ }; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; @@ -420,6 +420,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 1>, <&dmac_peri 2>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; status = "disabled"; @@ -433,6 +435,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 3>, <&dmac_peri 4>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -459,6 +463,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 7>, <&dmac_peri 8>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; status = "disabled"; @@ -472,6 +478,8 @@ reg-io-width = <4>; clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac_peri 9>, <&dmac_peri 10>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart4_xfer>; status = "disabled"; @@ -601,7 +609,6 @@ reg = <0x0 0xff500000 0x0 0x100>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST0>; - clock-names = "usbhost"; phys = <&usbphy1>; phy-names = "usb"; status = "disabled"; @@ -644,7 +651,6 @@ reg = <0x0 0xff5c0000 0x0 0x100>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HSIC>; - clock-names = "usbhost"; status = "disabled"; }; @@ -718,7 +724,7 @@ status = "disabled"; }; - bus_intmem@ff700000 { + bus_intmem: sram@ff700000 { compatible = "mmio-sram"; reg = <0x0 0xff700000 0x0 0x18000>; #address-cells = <1>; @@ -730,7 +736,7 @@ }; }; - sram@ff720000 { + pmu_sram: sram@ff720000 { compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; reg = <0x0 0xff720000 0x0 0x1000>; }; @@ -946,8 +952,8 @@ compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; reg = <0x0 0xff8b0000 0x0 0x10000>; #sound-dai-cells = <0>; - clock-names = "hclk", "mclk"; - clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + clocks = <&cru SCLK_SPDIF8CH>, <&cru HCLK_SPDIF8CH>; + clock-names = "mclk", "hclk"; dmas = <&dmac_bus_s 3>; dma-names = "tx"; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; @@ -962,12 +968,10 @@ reg = <0x0 0xff890000 0x0 0x10000>; #sound-dai-cells = <0>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0>; + clock-names = "i2s_clk", "i2s_hclk"; dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; rockchip,playback-channels = <8>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 241f43e29c77..f9fcb7e9657b 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -32,7 +32,7 @@ spi1 = &spi1; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -91,7 +91,7 @@ status = "disabled"; }; - L2: l2-cache-controller@10138000 { + L2: cache-controller@10138000 { compatible = "arm,pl310-cache"; reg = <0x10138000 0x1000>; cache-unified; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 1fd06e7cb983..f9cfe2c80791 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -85,7 +85,7 @@ #clock-cells = <0>; }; - amba { + amba: bus { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -102,7 +102,7 @@ }; }; - bus_intmem@10080000 { + bus_intmem: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x2000>; #address-cells = <1>; @@ -120,7 +120,6 @@ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 6>, <&pdma 7>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart2m0_xfer>; status = "disabled"; @@ -136,7 +135,6 @@ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 4>, <&pdma 5>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; status = "disabled"; @@ -152,7 +150,6 @@ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; dmas = <&pdma 2>, <&pdma 3>; - #dma-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "disabled"; @@ -208,7 +205,6 @@ clock-names = "spiclk", "apb_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; - #dma-cells = <2>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -370,7 +366,6 @@ reg = <0x1038c000 0x100>; interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - clock-frequency = <1000000>; clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; clock-names = "saradc", "apb_pclk"; status = "disabled"; @@ -499,7 +494,6 @@ reg = <0x30140000 0x20000>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -510,7 +504,6 @@ reg = <0x30160000 0x20000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST0>, <&u2phy>; - clock-names = "usbhost", "utmi"; phys = <&u2phy_host>; phy-names = "usb"; status = "disabled"; @@ -527,7 +520,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 326b39328b58..6763423d64b8 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -686,6 +686,14 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k 0>; }; + + watchdog: watchdog@ffffff80 { + compatible = "microchip,sam9x60-wdt"; + reg = <0xffffff80 0x24>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k 0>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2012b7407c60..ab550d69db91 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -695,7 +695,7 @@ }; rtc: rtc@f80480b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d2-rtc"; reg = <0xf80480b0 0x30>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 203d40be70a5..f11b018e9173 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -159,8 +159,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>, <&dma0 2 AT91_DMA_CFG_PER_ID(8)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi0_clk>; @@ -174,8 +177,11 @@ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>, <&dma0 2 AT91_DMA_CFG_PER_ID(10)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi1_clk>; @@ -357,8 +363,11 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi2_clk>; @@ -639,6 +648,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */ }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -647,6 +662,12 @@ <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */ AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -655,6 +676,12 @@ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 6ab27a7b388d..c9c0316b5b0e 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -458,8 +458,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(3))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c0>; + pinctrl-1 = <&pinctrl_i2c0_gpio>; + sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 32>; @@ -477,8 +480,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; @@ -519,8 +525,11 @@ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(7))>; dma-names = "tx", "rx"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>; + scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; @@ -884,7 +893,7 @@ }; rtc@fc0686b0 { - compatible = "atmel,at91rm9200-rtc"; + compatible = "atmel,sama5d4-rtc"; reg = <0xfc0686b0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; @@ -1122,6 +1131,12 @@ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; + + pinctrl_i2c0_gpio: i2c0-gpio { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c1 { @@ -1130,6 +1145,12 @@ <AT91_PIOE 29 AT91_PERIPH_C AT91_PINCTRL_NONE /* TWD1, conflicts with UART0 RX and DIBP */ AT91_PIOE 30 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* TWCK1, conflicts with UART0 TX and DIBN */ }; + + pinctrl_i2c1_gpio: i2c1-gpio { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; i2c2 { @@ -1138,6 +1159,12 @@ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* TWD2, conflicts with RD0 and PWML1 */ AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* TWCK2, conflicts with RF0 */ }; + + pinctrl_i2c2_gpio: i2c2-gpio { + atmel,pins = + <AT91_PIOB 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; isi { diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 1916f31a30ff..5a8d92a061df 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -25,12 +25,9 @@ cpus { cpu@0 { cpu0-supply = <&vdd_dvfs>; - operating-points = < - /* kHz uV */ - 1196000 1315000 - 598000 1175000 - 398667 1065000 - >; + operating-points = <1196000 1315000>, /* kHz uV */ + < 598000 1175000>, + < 398667 1065000>; voltage-tolerance = <1>; /* 1% */ }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 2a86e72d9791..3b8571b8b412 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -431,8 +431,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -451,8 +451,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; @@ -471,8 +471,8 @@ snps,perfect-filter-entries = <128>; tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; - clocks = <&l4_mp_clk>; - clock-names = "stmmaceth"; + clocks = <&l4_mp_clk>, <&peri_emac_ptp_clk>; + clock-names = "stmmaceth", "ptp_ref"; resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index 9bd9e04c7361..9aa897b79544 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -16,11 +16,11 @@ partition@0 { label = "Boot and fpga data"; - reg = <0x0 0x1C00000>; + reg = <0x0 0x02000000>; }; partition@1c00000 { label = "Root Filesystem - JFFS2"; - reg = <0x1C00000 0x6400000>; + reg = <0x02000000 0x06000000>; }; }; }; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 14d4d8617d75..3cd6ee6d50e0 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -314,13 +314,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi index c72aa250bf6f..67bc69e67b33 100644 --- a/arch/arm/boot/dts/ste-ab8505.dtsi +++ b/arch/arm/boot/dts/ste-ab8505.dtsi @@ -261,13 +261,13 @@ mcde@a0350000 { vana-supply = <&ab8500_ldo_ana_reg>; - dsi@a0351000 { + dsi-controller@a0351000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0352000 { + dsi-controller@a0352000 { vana-supply = <&ab8500_ldo_ana_reg>; }; - dsi@a0353000 { + dsi-controller@a0353000 { vana-supply = <&ab8500_ldo_ana_reg>; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 6671f74c9f03..3e10da3f8fd3 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -1097,7 +1097,7 @@ ranges; status = "disabled"; - dsi0: dsi@a0351000 { + dsi0: dsi-controller@a0351000 { compatible = "ste,mcde-dsi"; reg = <0xa0351000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>; @@ -1105,7 +1105,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi1: dsi@a0352000 { + dsi1: dsi-controller@a0352000 { compatible = "ste,mcde-dsi"; reg = <0xa0352000 0x1000>; clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>; @@ -1113,7 +1113,7 @@ #address-cells = <1>; #size-cells = <0>; }; - dsi2: dsi@a0353000 { + dsi2: dsi-controller@a0353000 { compatible = "ste,mcde-dsi"; reg = <0xa0353000 0x1000>; /* This DSI port only has the Low Power / Energy Save clock */ diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index e32d0c36feb8..b8fd8f18ba16 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -199,7 +199,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index e024520f4d47..de82b9db956f 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -66,7 +66,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "samsung,s6d16d0"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index cb3677f0a1cb..9f285c7cf914 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -45,7 +45,7 @@ mcde@a0350000 { status = "okay"; - dsi@a0351000 { + dsi-controller@a0351000 { panel { compatible = "sony,acx424akp"; reg = <0>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts new file mode 100644 index 000000000000..292ed5286652 --- /dev/null +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Devicetree for the Samsung XCover 2 GT-S7710 also known as Skomer. + */ + +/dts-v1/; +#include "ste-db8500.dtsi" +#include "ste-ab8505.dtsi" +#include "ste-dbx5x0-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung XCover 2 (GT-S7710)"; + compatible = "samsung,skomer", "st-ericsson,u8500"; + + chosen { + stdout-path = &serial2; + }; + + /* TI TXS0206 level translator for 2.9 V */ + sd_level_translator: regulator-gpio { + compatible = "regulator-fixed"; + + /* GPIO87 EN */ + gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + + regulator-name = "sd-level-translator"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-type = "voltage"; + + startup-delay-us = <200>; + + pinctrl-names = "default"; + pinctrl-0 = <&sd_level_translator_default>; + }; + + /* External LDO MIC5366-3.3YMT for eMMC */ + ldo_3v3_reg: regulator-gpio-ldo-3v3 { + compatible = "regulator-fixed"; + regulator-name = "en-3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <5000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_ldo_en_default_mode>; + }; + + wlan_en: regulator-gpio-wlan-en { + compatible = "regulator-fixed"; + regulator-name = "wl-reg-on"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + startup-delay-us = <200000>; + /* GPIO215 WLAN_EN */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default_mode>; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_default>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_default_mode>; + + button-home { + linux,code = <KEY_HOME>; + label = "HOME"; + /* GPIO91 */ + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + }; + button-volup { + linux,code = <KEY_VOLUMEUP>; + label = "VOL+"; + /* GPIO67 */ + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + button-voldown { + linux,code = <KEY_VOLUMEDOWN>; + label = "VOL-"; + /* GPIO92 */ + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + }; + button-menu { + linux,code = <KEY_MENU>; + label = "MENU"; + /* GPIO204 */ + gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + }; + button-back { + linux,code = <KEY_BACK>; + label = "BACK"; + /* GPIO205 */ + gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * FIXME: this is not quite GPIO backlight. This is a + * KTD253 one-wire GPIO-controlled backlight. It can + * work as a GPIO backlight. + */ + gpio_bl: backlight { + compatible = "gpio-backlight"; + /* GPIO 69 */ + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_backlight_default_mode>; + }; + + i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_0_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the NCP6914 Camera power management unit */ + }; + + i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_gpio_1_default>; + #address-cells = <1>; + #size-cells = <0>; + /* TODO: this should be used by the ALPS HSCDTD008A compass sensor */ + }; + + soc { + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + /* All direction control is used */ + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-pin-fbclk; + full-pwr-cycle; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&sd_level_translator>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_1_default>; + pinctrl-1 = <&mc0_a_1_sleep>; + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + non-removable; + cap-sd-highspeed; + vmmc-supply = <&wlan_en>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_2_default>; + pinctrl-1 = <&mc1_a_2_sleep>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + /* GPIO216 WL_HOST_WAKE */ + interrupt-parent = <&gpio6>; + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_mode>; + }; + }; + + // eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + non-removable; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&ldo_3v3_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + + status = "okay"; + }; + + /* GBF (Bluetooth) UART */ + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + + /* FIXME: not quite working yet, probably needs regulators */ + bluetooth { + compatible = "brcm,bcm4330-bt"; + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bluetooth_default_mode>; + }; + }; + + /* GPF UART */ + uart@80121000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u1rxtx_a_1_default &u1ctsrts_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep &u1ctsrts_a_1_sleep>; + }; + + /* Debugging console UART connected to AB8505 USB */ + uart@80007000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + }; + + prcmu@80157000 { + ab8505 { + ab8500_usb { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + ab8505-regulators { + ab8500_ldo_aux1 { + /* Used for VDD for sensors */ + regulator-name = "AUX1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux2 { + /* Supplies the Cypress TMA140 touchscreen only with 3.3V */ + regulator-name = "AUX2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux3 { + /* Used for voltage for external MMC/SD card */ + regulator-name = "AUX3"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <3300000>; + }; + + ab8500_ldo_aux4 { + regulator-name = "AUX4"; + /* Hammer to 3.0V for the display */ + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ab8500_ldo_aux5 { + regulator-name = "AUX5"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <2790000>; + regulator-always-on; + }; + + ab8500_ldo_aux6 { + regulator-name = "AUX6"; + /* Hammer to 1.8V for the display */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ab8500_ldo_aux8 { + /* Mostly VIO for sensors */ + regulator-name = "AUX8"; + }; + }; + }; + }; + + /* I2C0 */ + i2c@80004000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + + proximity@44 { + compatible = "sharp,gp2ap002s00f"; + clock-frequency = <400000>; + reg = <0x44>; + + interrupt-parent = <&gpio4>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gp2ap002_skomer_default>; + sharp,proximity-far-hysteresis = /bits/ 8 <0x2f>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x0f>; + }; + }; + + + /* I2C2 */ + i2c@80128000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + + accel@18 { + compatible = "bosch,bma254"; + clock-frequency = <400000>; + reg = <0x18>; + + /* GPIO224 used as "smart alert" interrupt */ + interrupt-parent = <&gpio7>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&ab8500_ldo_aux8_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&bma254_skomer_default>; + }; + }; + + /* I2C3 */ + i2c@80110000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + + /* TODO: this should be used by the Cypress TMA140 touchscreen */ + }; + + mcde@a0350000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dsi_default_mode>; + + dsi-controller@a0351000 { + panel { + /* NT35510-based Hydis HVA40WV1 */ + compatible = "hydis,hva40wv1", "novatek,nt35510"; + reg = <0>; + /* v_lcd_3v0 2.3-4.8V */ + vdd-supply = <&ab8500_ldo_aux4_reg>; + /* v_lcd_1v8 1.65-3.3V */ + vddi-supply = <&ab8500_ldo_aux6_reg>; + /* GPIO 139 */ + reset-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&display_default_mode>; + backlight = <&gpio_bl>; + }; + }; + }; + }; +}; + +&pinctrl { + /* + * This extends the MC0 default config to include DAT32DIR + * which is used by this machine. If we don't do this the + * SD card does not work. + */ + sdi0 { + mc0_a_1_default { + default_mux { + function = "mc0"; + /* This machine uses the DAT31 pin */ + groups = "mc0_a_1", "mc0dat31dir_a_1"; + }; + default_cfg5 { + pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + }; + }; + + mcde { + dsi_default_mode: dsi_default { + default_mux1 { + /* Mux in VSI0 used for DSI TE */ + function = "lcd"; + groups = "lcdvsi0_a_1"; /* VSI0 for LCD */ + }; + default_cfg1 { + pins = "GPIO68_E1"; /* VSI0 */ + ste,config = <&in_nopull>; + }; + }; + }; + + /* Two GPIO lines used by the display */ + display { + display_default_mode: display_default { + skomer_cfg1 { + /* + * OLED DETECT or check_pba, this appears to be high + * on "PBA" which I guess is "prototype board A". + */ + pins = "GPIO93_B7"; + ste,config = <&gpio_in_nopull>; + }; + skomer_cfg2 { + pins = "GPIO139_C9"; + /* + * MIPI_DSI0_RESET_N resets the display, leave high + * (de-asserted) so we only assert reset explicitly + * from the display driver. + */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + backlight { + gpio_backlight_default_mode: backlight_default { + skomer_cfg1 { + pins = "GPIO69_E2"; /* LCD_BL_CTRL */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + /* GPIO that enables the 2.9V SD card level translator */ + sd-level-translator { + sd_level_translator_default: sd_level_translator_default { + /* level shifter on GPIO87 */ + skomer_cfg1 { + pins = "GPIO87_B3"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO that enables the LDO regulator for the eMMC */ + emmc-ldo { + emmc_ldo_en_default_mode: emmc_ldo_default { + /* LDO enable on GPIO223 */ + skomer_cfg1 { + pins = "GPIO223_AH9"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + /* GPIO keys */ + gpio-keys { + gpio_keys_default_mode: gpio_keys_default { + skomer_cfg1 { + pins = "GPIO67_G2", /* VOL UP */ + "GPIO91_B6", /* HOME */ + "GPIO92_D6", /* VOL DOWN */ + "GPIO204_AF23", /* MENU */ + "GPIO205_AG23"; /* BACK */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + /* Interrupt line for BMA254 */ + bma254 { + bma254_skomer_default: bma254_skomer { + skomer_cfg1 { + pins = "GPIO224_AG9"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + /* Interrupt line for light/proximity sensor GP2AP002 */ + gp2ap002 { + gp2ap002_skomer_default: gp2ap002_skomer { + skomer_cfg1 { + pins = "GPIO146_D13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for NCP6914 */ + i2c-gpio-0 { + i2c_gpio_0_default: i2c_gpio_0 { + skomer_cfg1 { + pins = "GPIO143_D12", "GPIO144_B13"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + /* GPIO-based I2C bus for ALPS HSCD compass */ + i2c-gpio-1 { + i2c_gpio_1_default: i2c_gpio_1 { + skomer_cfg1 { + pins = "GPIO151_B17", "GPIO152_D16"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + wlan { + wlan_default_mode: wlan_default { + skomer_cfg1 { + pins = "GPIO216_AG12"; + ste,config = <&gpio_in_pd>; + }; + }; + wlan_en_default_mode: wlan_en_default { + skomer_cfg2 { + pins = "GPIO215_AH13"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + bluetooth { + bluetooth_default_mode: bluetooth_default { + skomer_cfg1 { + pins = "GPIO199_AH23", "GPIO222_AJ9"; + ste,config = <&gpio_out_lo>; + }; + skomer_cfg2 { + pins = "GPIO97_D9"; + ste,config = <&gpio_in_nopull>; + }; + }; + }; + vibrator { + vibrator_default: vibrator_default { + skomer_cfg1 { + pins = "GPIO195_AG28"; /* MOT_EN */ + ste,config = <&gpio_out_lo>; + }; + }; + }; +}; + +&ab8505_gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_default>; + + gpio { + gpio_default: gpio_default { + skomer_mux { + /* Change unused pins to GPIO mode */ + function = "gpio"; + groups = "gpio3_a_1", /* default: SysClkReq4 */ + "gpio14_a_1"; /* default: PWMOut1 */ + }; + skomer_cfg1 { + pins = "GPIO11_B17", "GPIO13_D17", "GPIO50_L4"; + bias-disable; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts index fcc804e3c158..4ea3f98dd275 100644 --- a/arch/arm/boot/dts/stm32746g-eval.dts +++ b/arch/arm/boot/dts/stm32746g-eval.dts @@ -165,7 +165,7 @@ interrupts = <8 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpioi>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 0237d4ddaa92..73c07f0dfad2 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -162,6 +162,40 @@ }; }; + ethernet0_rmii_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF0)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_pins_sleep_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + fmc_pins_a: fmc-0 { pins1 { pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ @@ -685,6 +719,26 @@ }; }; + + sai2a_pins_b: sai2a-2 { + pins1 { + pinmux = <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, AF10)>; /* SAI2_SCK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_b: sai2a-sleep-3 { + pins { + pinmux = <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('D', 13, ANALOG)>; /* SAI2_SCK_A */ + }; + }; + sai2b_pins_a: sai2b-0 { pins1 { pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ @@ -1000,6 +1054,19 @@ }; }; + usart3_pins_a: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ + bias-disable; + }; + }; + uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ @@ -1040,6 +1107,32 @@ bias-disable; }; }; + + uart8_pins_a: uart8-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */ + }; + }; + + usbotg_fs_dp_dm_pins_a: usbotg-fs-dp-dm-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* OTG_FS_DM */ + <STM32_PINMUX('A', 12, ANALOG)>; /* OTG_FS_DP */ + }; + }; }; &pinctrl_z { diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index fb41d0778b00..3ea05ba48215 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -17,6 +17,7 @@ cpu0: cpu@0 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <0>; }; @@ -483,6 +484,7 @@ resets = <&rcc I2C1_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -496,6 +498,7 @@ resets = <&rcc I2C2_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -509,6 +512,7 @@ resets = <&rcc I2C3_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -522,6 +526,7 @@ resets = <&rcc I2C5_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -959,6 +964,7 @@ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA1>; + resets = <&rcc DMA1_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -976,6 +982,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc DMA2>; + resets = <&rcc DMA2_R>; #dma-cells = <4>; st,mem2mem; dma-requests = <8>; @@ -989,6 +996,7 @@ dma-masters = <&dma1 &dma2>; dma-channels = <16>; clocks = <&rcc DMAMUX>; + resets = <&rcc DMAMUX_R>; }; adc: adc@48003000 { @@ -1044,7 +1052,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1055,6 +1063,7 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; + usb33d-supply = <&usb33>; status = "disabled"; }; @@ -1280,6 +1289,7 @@ reg = <0x58000000 0x1000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc MDMA>; + resets = <&rcc MDMA_R>; #dma-cells = <5>; dma-channels = <32>; dma-requests = <48>; @@ -1369,10 +1379,12 @@ clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx", + "eth-ck", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, + <&rcc ETHCK_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1473,6 +1485,7 @@ resets = <&rcc I2C4_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; @@ -1508,6 +1521,7 @@ resets = <&rcc I2C6_R>; #address-cells = <1>; #size-cells = <0>; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi index 2d759fc6015c..6d9ab08667fc 100644 --- a/arch/arm/boot/dts/stm32mp153.dtsi +++ b/arch/arm/boot/dts/stm32mp153.dtsi @@ -10,6 +10,7 @@ cpus { cpu1: cpu@1 { compatible = "arm,cortex-a7"; + clock-frequency = <650000000>; device_type = "cpu"; reg = <1>; }; diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts index cbfa4075907e..425175f7d83c 100644 --- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts +++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts @@ -135,10 +135,6 @@ #interrupt-cells = <2>; status = "okay"; - st,main-control-register = <0x04>; - st,vin-control-register = <0xc0>; - st,usb-control-register = <0x30>; - regulators { compatible = "st,stpmic1-regulators"; @@ -173,7 +169,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; - st,mask_reset; regulator-initial-mode = <0>; regulator-over-current-protection; }; @@ -213,8 +208,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; interrupt-parent = <&pmic>; }; @@ -240,7 +233,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -300,7 +292,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts new file mode 100644 index 000000000000..af99e132e1b1 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ + +#include "stm32mp157c-dhcom-som.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)"; + compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + serial2 = &uart8; + ethernet0 = ðernet0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + display_bl: display-bl { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; + default-brightness-level = <8>; + enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + ethernet_vio: vioregulator { + compatible = "regulator-fixed"; + regulator-name = "vio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; + regulator-always-on; + regulator-boot-on; + }; + + panel { + compatible = "edt,etm0700g0edh6"; + backlight = <&display_bl>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + sound { + compatible = "audio-graph-card"; + routing = + "MIC_IN", "Capture", + "Capture", "Mic Bias", + "Playback", "HP_OUT"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rmii_pins_a>; + pinctrl-1 = <ðernet0_rmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&phy0>; + st,eth-ref-clk-sel; + phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&v3v3>; + VDDIO-supply = <&vdd>; + + sgtl5000_port: port { + #address-cells = <1>; + #size-cells = <0>; + + sgtl5000_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + sgtl5000_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + + }; + + polytouch@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpiog>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ + linux,wakeup; + }; +}; + +<dc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_b>; + pinctrl-1 = <<dc_pins_sleep_b>; + status = "okay"; + + port { + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; +}; + +&m_can1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&sgtl5000_tx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&sgtl5000_rx_endpoint>; + format = "i2s"; + mclk-fs = <512>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <16>; + }; + }; + }; +}; + +&timers2 { + /* spare dmas for other usage (un-delete to enable pwm capture) */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + pwm2: pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins_a>; + status = "okay"; +}; + +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usbphyc { + status = "okay"; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi new file mode 100644 index 000000000000..f81dc3134135 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi @@ -0,0 +1,368 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2019 Marek Vasut <marex@denx.de> + */ +/dts-v1/; + +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + memory@c0000000 { + device_type = "memory"; + reg = <0xC0000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; +}; + +&adc { + vdd-supply = <&vdd>; + vdda-supply = <&vdda>; + vref-supply = <&vdda>; + status = "okay"; + + adc1: adc@0 { + st,min-sample-time-nsecs = <5000>; + st,adc-channels = <0>; + status = "okay"; + }; + + adc2: adc@100 { + st,adc-channels = <1>; + st,min-sample-time-nsecs = <5000>; + status = "okay"; + }; +}; + +&dac { + pinctrl-names = "default"; + pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; + vref-supply = <&vdda>; + status = "okay"; + + dac1: dac@1 { + status = "okay"; + }; + dac2: dac@2 { + status = "okay"; + }; +}; + +&dts { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + rtc@32 { + compatible = "microcrystal,rv8803"; + reg = <0x32>; + }; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask-reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>; + interrupt-names = "onkey-falling", "onkey-rising"; + power-off-time-sec = <10>; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + touchscreen@49 { + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <&v3v3>; + interrupts-extended = <&gpioh 3 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + vqmmc-supply = <&v3v3>; + mmc-ddr-3_3v; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 1fc43251d697..9d2592db630c 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -130,10 +130,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -218,8 +220,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -241,7 +241,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -313,7 +312,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiog 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,sig-dir; st,neg-edge; st,use-ckin; @@ -334,7 +334,7 @@ st,neg-edge; bus-width = <8>; vmmc-supply = <&v3v3>; - vqmmc-supply = <&v3v3>; + vqmmc-supply = <&vdd>; mmc-ddr-3_3v; status = "okay"; }; @@ -355,6 +355,10 @@ status = "okay"; }; +&usbotg_hs { + vbus-supply = <&vbus_otg>; +}; + &usbphyc_port0 { phy-supply = <&vdd_usb>; vdda1v1-supply = <®11>; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index 228e35e16884..8a4c7ff31a92 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -174,8 +174,9 @@ }; &i2c2 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -210,7 +211,7 @@ interrupt-parent = <&gpioi>; vdd-supply = <&v3v3>; - stmfx_pinctrl: stmfx-pin-controller { + stmfx_pinctrl: pinctrl { compatible = "st,stmfx-0300-pinctrl"; gpio-controller; #gpio-cells = <2>; @@ -218,7 +219,7 @@ #interrupt-cells = <2>; gpio-ranges = <&stmfx_pinctrl 0 0 24>; - joystick_pins: joystick { + joystick_pins: joystick-pins { pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; bias-pull-down; }; @@ -227,8 +228,9 @@ }; &i2c5 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c5_pins_a>; + pinctrl-1 = <&i2c5_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; @@ -353,7 +355,8 @@ }; &usbotg_hs { - dr_mode = "peripheral"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index f6672e87aef3..d946e0a02f5c 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -216,10 +216,12 @@ }; &i2c4 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c4_pins_a>; + pinctrl-1 = <&i2c4_pins_sleep_a>; i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; + clock-frequency = <400000>; status = "okay"; /* spare dmas for other usage */ /delete-property/dmas; @@ -304,8 +306,6 @@ vdd_usb: ldo4 { regulator-name = "vdd_usb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; interrupts = <IT_CURLIM_LDO4 0>; }; @@ -328,7 +328,6 @@ vref_ddr: vref_ddr { regulator-name = "vref_ddr"; regulator-always-on; - regulator-over-current-protection; }; bst_out: boost { @@ -479,7 +478,8 @@ pinctrl-0 = <&sdmmc1_b4_pins_a>; pinctrl-1 = <&sdmmc1_b4_od_pins_a>; pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; - broken-cd; + cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; + disable-wp; st,neg-edge; bus-width = <4>; vmmc-supply = <&v3v3>; diff --git a/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts new file mode 100644 index 000000000000..e9ef97c9c893 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-pocketbook-touch-lux-3.dts @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright 2019 Ondrej Jirman <megous@megous.com> + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "PocketBook Touch Lux 3"; + compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */ + default-state = "on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + label = "GPIO Keys"; + + key-right { + label = "Right"; + linux,code = <KEY_RIGHT>; + gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */ + }; + + key-left { + label = "Left"; + linux,code = <KEY_LEFT>; + gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */ + }; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-1v8-nor-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_1v8_nor: regulator-nor { + compatible = "regulator-fixed"; + regulator-name = "vdd-nor"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + regulator-always-on; + }; + + reg_1v8_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "vdd-ctp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_1v8>; + }; + + reg_3v3_mmc0: regulator-mmc0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-mmc0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */ + vin-supply = <®_vcc3v3>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + status = "okay"; + + /* Touchpanel is connected here. */ +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-200 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <200000>; + }; + + button-400 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + vmmc-supply = <®_3v3_mmc0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pc_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + /* We need this otherwise the LDO3 would overload */ + regulator-soft-start; + regulator-ramp-delay = <1600>; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>; + status = "okay"; + + epd_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "macronix,mx25u4033", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pg_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index b8bb58b0180e..e6b036734a64 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -773,9 +773,6 @@ interconnect-names = "dma-mem"; status = "disabled"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 7762fbd9a133..f3425a66fc0a 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -1139,9 +1139,6 @@ "ram"; resets = <&ccu RST_AHB1_BE1>; - assigned-clocks = <&ccu CLK_BE1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1185,9 +1182,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC1>; - assigned-clocks = <&ccu CLK_IEP_DRC1>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1231,9 +1225,6 @@ "ram"; resets = <&ccu RST_AHB1_BE0>; - assigned-clocks = <&ccu CLK_BE0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; @@ -1274,9 +1265,6 @@ "ram"; resets = <&ccu RST_AHB1_DRC0>; - assigned-clocks = <&ccu CLK_IEP_DRC0>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts new file mode 100644 index 000000000000..da5a2eea4ce3 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-linutronix-testbox-v2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2020 Linutronix GmbH + * Author: Benedikt Spranger <b.spranger@linutronix.de> + */ + +/dts-v1/; +#include "sun7i-a20-lamobo-r1.dts" + +/ { + model = "Lamobo R1"; + compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20"; + + leds { + led-opto1 { + label = "lamobo_r1:opto:powerswitch"; + gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>; + }; + + led-opto2 { + label = "lamobo_r1:opto:relay"; + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + status = "okay"; + }; + + atecc508a@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; +}; + +&can0 { + pinctrl-names = "default"; + pinctrl-0 = <&can_ph_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 92b5be97085d..ffe1d10a1a84 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/clock/sun7i-a20-ccu.h> #include <dt-bindings/reset/sun4i-a10-ccu.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> / { interrupt-parent = <&gic>; @@ -404,11 +405,12 @@ }; tcon0: lcd-controller@1c0c000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon0", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0c000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - resets = <&ccu RST_TCON0>; - reset-names = "lcd"; + resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>; + reset-names = "lcd", "lvds"; clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_TCON0_CH0>, <&ccu CLK_TCON0_CH1>; @@ -454,7 +456,8 @@ }; tcon1: lcd-controller@1c0d000 { - compatible = "allwinner,sun7i-a20-tcon"; + compatible = "allwinner,sun7i-a20-tcon1", + "allwinner,sun7i-a20-tcon"; reg = <0x01c0d000 0x1000>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; resets = <&ccu RST_TCON1>; @@ -932,6 +935,20 @@ }; /omit-if-no-ref/ + lcd_lvds0_pins: lcd-lvds0-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9"; + function = "lvds0"; + }; + + /omit-if-no-ref/ + lcd_lvds1_pins: lcd-lvds1-pins { + pins = "PD10", "PD11", "PD12", "PD13", "PD14", + "PD15", "PD16", "PD17", "PD18", "PD19"; + function = "lvds1"; + }; + + /omit-if-no-ref/ mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48487f6d4ab9..c1362d0f0ff8 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -684,9 +684,6 @@ clock-names = "ahb", "mod", "ram"; resets = <&ccu RST_BUS_DRC>; - assigned-clocks = <&ccu CLK_DRC>; - assigned-clock-rates = <300000000>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index a2c37adacf77..cfd3858afb3e 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -372,8 +372,6 @@ "ram", "sat"; resets = <&ccu RST_BUS_DE_BE>, <&ccu RST_BUS_SAT>; reset-names = "be", "sat"; - assigned-clocks = <&ccu CLK_DE_BE>; - assigned-clock-rates = <300000000>; }; &ccu { diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index e8b3669e0e5d..bfc9bb277a49 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -493,7 +493,6 @@ }; &usb_otg { - dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index e7b9bef1be6b..655404d6d3a3 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -72,7 +72,7 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -83,7 +83,7 @@ #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -94,7 +94,7 @@ #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C0CPUX>; @@ -116,7 +116,7 @@ #cooling-cells = <2>; }; - cpu@101 { + cpu101: cpu@101 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -127,7 +127,7 @@ #cooling-cells = <2>; }; - cpu@102 { + cpu102: cpu@102 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -138,7 +138,7 @@ #cooling-cells = <2>; }; - cpu@103 { + cpu103: cpu@103 { compatible = "arm,cortex-a7"; device_type = "cpu"; clocks = <&ccu CLK_C1CPUX>; @@ -314,7 +314,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-a83t-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_PLL_DE>; clock-names = "bus", @@ -324,6 +324,17 @@ #reset-cells = <1>; }; + rotate: rotate@1020000 { + compatible = "allwinner,sun8i-a83t-de2-rotate"; + reg = <0x1020000 0x10000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&display_clocks CLK_BUS_ROT>, + <&display_clocks CLK_ROT>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_ROT>; + }; + mixer0: mixer@1100000 { compatible = "allwinner,sun8i-a83t-de2-mixer-0"; reg = <0x01100000 0x100000>; @@ -1188,12 +1199,60 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu0_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1_thermal: cpu1-thermal { polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 1>; + + trips { + cpu1_hot: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_very_hot: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu1_hot>; + cooling-device = <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal: gpu-thermal { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 20217e2ca4d3..e83aa6866e7e 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-h3-h5.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpu0_opp_table: opp_table0 { @@ -227,6 +228,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index 769efb4d7775..b782041e0e04 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-de2.h> +#include <dt-bindings/thermal/thermal.h> / { #address-cells = <1>; @@ -110,6 +111,22 @@ status = "disabled"; }; + thermal-zones { + cpu_thermal: cpu0-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; + + gpu_thermal: gpu-thermal { + /* milliseconds */ + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -119,7 +136,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-r40-de2-clk", "allwinner,sun8i-h3-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -562,6 +579,17 @@ clocks = <&osc24M>; }; + ths: thermal-sensor@1c24c00 { + compatible = "allwinner,sun8i-r40-ths"; + reg = <0x01c24c00 0x100>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + /* TODO: add nvmem-cells for calibration */ + #thermal-sensor-cells = <1>; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi index 81ea50838cd5..e5312869c0d2 100644 --- a/arch/arm/boot/dts/sun8i-v3s.dtsi +++ b/arch/arm/boot/dts/sun8i-v3s.dtsi @@ -105,7 +105,7 @@ display_clocks: clock@1000000 { compatible = "allwinner,sun8i-v3s-de2-clk"; - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 62ca0d287008..01a5df9aa71b 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -114,7 +114,7 @@ display_clocks: clock@1000000 { /* compatible is in per SoC .dtsi file */ - reg = <0x01000000 0x100000>; + reg = <0x01000000 0x10000>; clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; clock-names = "bus", @@ -894,6 +894,21 @@ pins = "PL0", "PL1"; function = "s_i2c"; }; + + r_pwm_pin: r-pwm-pin { + pins = "PL10"; + function = "s_pwm"; + }; + }; + + r_pwm: pwm@1f03800 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01f03800 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index 97a5c3504bbe..d3e032e7d21a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -1296,7 +1296,13 @@ clocks = <&tegra_car TEGRA114_CLK_PLL_A>, <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA114_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA114_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA114_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA114_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 0d7a6327e404..450a1f1b12a0 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra114-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra114"; @@ -514,11 +515,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi index 0462ed2dd8b8..de499f736bda 100644 --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi @@ -2009,8 +2009,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi index d1e8593ef0d9..d70a86da4ee4 100644 --- a/arch/arm/boot/dts/tegra124-apalis.dtsi +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -2001,8 +2001,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index d5fd642f8b77..1b567e2d5ce0 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1782,12 +1782,6 @@ }; ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - /* Mini PCIe */ usb2-1 { status = "okay"; @@ -2058,8 +2052,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; thermal-zones { diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 3b10f475037f..9b1af50cd4b8 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -788,9 +788,15 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>; nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 7309393bfced..8c2ee6e7d6f1 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1266,8 +1266,14 @@ clocks = <&tegra_car TEGRA124_CLK_PLL_A>, <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA124_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA124_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 7f330b1f150f..94cac13d3e50 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/tegra124-car.h> #include <dt-bindings/thermal/tegra124-soctherm.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra124"; @@ -595,11 +596,12 @@ clocks = <&tegra_car TEGRA124_CLK_RTC>; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; fuse@7000f800 { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 9c58e7fcf5c0..c3b8ad53b967 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra20-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra20"; @@ -608,11 +609,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi index 8b7a827d604d..387b17458e22 100644 --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi @@ -1189,7 +1189,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index c18f6f61d764..6648506f3aa4 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1171,7 +1171,13 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index a3b0f3555cd2..45ef6002b225 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -2111,7 +2111,13 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 7ce61edd52f5..4b4f49a49394 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -619,8 +619,14 @@ clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; gpio-keys { diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 1f9198bb24ff..adba554381c7 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -1030,8 +1030,14 @@ nvidia,audio-codec = <&sgtl5000>; clocks = <&tegra_car TEGRA30_CLK_PLL_A>, <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA30_CLK_EXTERN1>; + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; clock-names = "pll_a", "pll_a_out0", "mclk"; + + assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>, + <&tegra_pmc TEGRA_PMC_CLK_OUT_1>; + + assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 55ae050042ce..d2d05f1da274 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/memory/tegra30-mc.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/tegra-pmc.h> / { compatible = "nvidia,tegra30"; @@ -714,11 +715,12 @@ status = "disabled"; }; - pmc@7000e400 { + tegra_pmc: pmc@7000e400 { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; }; mc: memory-controller@7000f000 { diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi index 64ec46c72a4c..06e7400d2940 100644 --- a/arch/arm/boot/dts/uniphier-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ld4.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -245,7 +245,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -265,7 +265,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -375,7 +375,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-ld4-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -398,7 +398,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi index 2ec04d7972ef..1c866f0306fc 100644 --- a/arch/arm/boot/dts/uniphier-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-pro4.dtsi @@ -59,7 +59,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -279,7 +279,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -299,7 +299,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -317,7 +317,7 @@ non-removable; }; - sd1: sdhc@5a600000 { + sd1: mmc@5a600000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a600000 0x200>; @@ -426,7 +426,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro4-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -588,7 +588,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi index ea3961f920a0..8f1ae0957f5f 100644 --- a/arch/arm/boot/dts/uniphier-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-pro5.dtsi @@ -131,7 +131,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -144,7 +144,7 @@ next-level-cache = <&l3>; }; - l3: l3-cache@500c8000 { + l3: cache-controller@500c8000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; @@ -174,8 +174,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 11>; /* common with spi0 */ + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -408,7 +408,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pro5-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -453,7 +453,155 @@ }; }; - nand: nand@68000000 { + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 134 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus0>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host"; + interrupts = <0 137 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro5-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pro5-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pro5-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@280 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x280 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@290 { + compatible = "socionext,uniphier-pro5-usb3-hsphy"; + reg = <0x290 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@380 { + compatible = "socionext,uniphier-pro5-usb3-ssphy"; + reg = <0x380 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + vbus-supply = <&usb1_vbus0>; + }; + }; + + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; @@ -469,7 +617,7 @@ resets = <&sys_rst 2>, <&sys_rst 2>; }; - emmc: sdhc@68400000 { + emmc: mmc@68400000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68400000 0x800>; @@ -485,7 +633,7 @@ non-removable; }; - sd: sdhc@68800000 { + sd: mmc@68800000 { compatible = "socionext,uniphier-sd-v3.1"; status = "disabled"; reg = <0x68800000 0x800>; diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index 13b0d4a7741f..2f2a24994c69 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -157,7 +157,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; @@ -187,8 +187,8 @@ interrupts = <0 216 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; - clocks = <&peri_clk 11>; - resets = <&peri_rst 11>; + clocks = <&peri_clk 12>; + resets = <&peri_rst 12>; }; serial0: serial@54006800 { @@ -446,7 +446,7 @@ }; }; - emmc: sdhc@5a000000 { + emmc: mmc@5a000000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a000000 0x800>; @@ -462,7 +462,7 @@ non-removable; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v3.1.1"; status = "disabled"; reg = <0x5a400000 0x800>; @@ -508,7 +508,7 @@ }; }; - aidet: aidet@5fc20000 { + aidet: interrupt-controller@5fc20000 { compatible = "socionext,uniphier-pxs2-aidet"; reg = <0x5fc20000 0x200>; interrupt-controller; @@ -761,7 +761,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi index 04e60c295319..a11897669c26 100644 --- a/arch/arm/boot/dts/uniphier-ref-daughter.dtsi +++ b/arch/arm/boot/dts/uniphier-ref-daughter.dtsi @@ -7,7 +7,7 @@ &i2c0 { eeprom@50 { - compatible = "microchip,24lc128"; + compatible = "microchip,24lc128", "atmel,24c128"; reg = <0x50>; pagesize = <64>; }; diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi index 4fc6676f5486..09992163e1f4 100644 --- a/arch/arm/boot/dts/uniphier-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-sld8.dtsi @@ -51,7 +51,7 @@ ranges; interrupt-parent = <&intc>; - l2: l2-cache@500c0000 { + l2: cache-controller@500c0000 { compatible = "socionext,uniphier-system-cache"; reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; @@ -249,7 +249,7 @@ #dma-cells = <1>; }; - sd: sdhc@5a400000 { + sd: mmc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a400000 0x200>; @@ -269,7 +269,7 @@ sd-uhs-sdr50; }; - emmc: sdhc@5a500000 { + emmc: mmc@5a500000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; reg = <0x5a500000 0x200>; @@ -379,7 +379,7 @@ interrupt-controller; }; - aidet: aidet@61830000 { + aidet: interrupt-controller@61830000 { compatible = "socionext,uniphier-sld8-aidet"; reg = <0x61830000 0x200>; interrupt-controller; @@ -402,7 +402,7 @@ }; }; - nand: nand@68000000 { + nand: nand-controller@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; reg-names = "nand_data", "denali_reg"; diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts index 5890cb974f78..c577ff4bb4be 100644 --- a/arch/arm/boot/dts/versatile-ab-ib2.dts +++ b/arch/arm/boot/dts/versatile-ab-ib2.dts @@ -10,7 +10,7 @@ model = "ARM Versatile AB + IB2 board"; /* Special IB2 control register */ - ib2_syscon@27000000 { + syscon@27000000 { compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd"; reg = <0x27000000 0x4>; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index dfae90adbb7c..5c183483ec3b 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -19,7 +19,7 @@ */ / { - smb@8000000 { + bus@8000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 2e29d7790497..5e48b641068a 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -19,7 +19,7 @@ */ / { - smb@4000000 { + bus@4000000 { motherboard { model = "V2M-P1"; arm,hbi = <0x190>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 0dc4277d5f8b..f82fa34c90be 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -236,7 +236,7 @@ }; }; - smb@8000000 { + bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 1de0a658adf1..3ac95a179452 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -608,7 +608,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index d5b47d526f9e..7aa64ae25779 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -206,7 +206,7 @@ }; }; - smb: smb@8000000 { + smb: bus@8000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index d796efaadbe3..623246f37448 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -295,7 +295,7 @@ }; }; - smb: smb@4000000 { + smb: bus@4000000 { compatible = "simple-bus"; #address-cells = <2>; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi index e2da122a63f4..c12a1b8bc086 100644 --- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ / { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index fba37b8756f7..cc1e069c44e6 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG + * Copyright 2014-2020 Toradex * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ / { diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 076998968fb5..088964f8dc4b 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index 92255f8893ce..8af7ed56e653 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf500.dtsi" diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi index b0ec475017ad..0c0dd442300a 100644 --- a/arch/arm/boot/dts/vf500.dtsi +++ b/arch/arm/boot/dts/vf500.dtsi @@ -23,7 +23,7 @@ }; soc { - aips-bus@40000000 { + bus@40000000 { intc: interrupt-controller@40003000 { compatible = "arm,cortex-a9-gic"; @@ -43,7 +43,7 @@ }; }; - aips-bus@40080000 { + bus@40080000 { pmu@40089000 { compatible = "arm,cortex-a5-pmu"; interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index ef9b4d6209f6..fb661e8a2dc6 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ /dts-v1/; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 05c9a39509b8..607cec2df861 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* - * Copyright 2014 Toradex AG - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright 2014-2020 Toradex */ #include "vf610.dtsi" diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts index 28732249cfc0..ce1920c052fc 100644 --- a/arch/arm/boot/dts/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -71,6 +71,14 @@ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28VDC_IN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index a1b4ccee2a10..95d0060fb56c 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -84,6 +84,14 @@ regulator-boot-on; gpio = <&gpio0 6 0>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* VCC_1V5 */ + <&adc0 9>, /* VCC_1V8 */ + <&adc1 8>, /* VCC_1V0 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts index 77e1484211e4..55b4201e27f6 100644 --- a/arch/arm/boot/dts/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts @@ -42,6 +42,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 28V_SW */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts index 847c5858fea1..a6c22a79779e 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts index 453fce80f858..3d05c894bdc0 100644 --- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -46,6 +46,14 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + supply-voltage-monitor { + compatible = "iio-hwmon"; + io-channels = <&adc0 8>, /* 12V_MAIN */ + <&adc0 9>, /* +3.3V */ + <&adc1 8>, /* VCC_1V5 */ + <&adc1 9>; /* VCC_1V2 */ + }; }; &adc0 { diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts index d4bc0e3f2f11..2c2db47af441 100644 --- a/arch/arm/boot/dts/vf610m4-colibri.dts +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -1,45 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Device tree for Colibri VF61 Cortex-M4 support * * Copyright (C) 2015 Stefan Agner - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 028e0ec30e0c..2d547e7b21ad 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -59,7 +59,7 @@ interrupt-parent = <&mscm_ir>; ranges; - aips0: aips-bus@40000000 { + aips0: bus@40000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -471,7 +471,7 @@ }; }; - aips1: aips-bus@40080000 { + aips1: bus@40080000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 5ef76fe3f33d..fa2ff41f84b9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -24,16 +24,11 @@ extern struct omap_hwmod_ocp_if am33xx_l3_s__l4_wkup; extern struct omap_hwmod_ocp_if am33xx_l3_main__l3_instr; extern struct omap_hwmod_ocp_if am33xx_mpu__prcm; extern struct omap_hwmod_ocp_if am33xx_l3_s__l3_main; -extern struct omap_hwmod_ocp_if am33xx_pruss__l3_main; extern struct omap_hwmod_ocp_if am33xx_gfx__l3_main; extern struct omap_hwmod_ocp_if am33xx_l3_main__gfx; extern struct omap_hwmod_ocp_if am33xx_l4_wkup__rtc; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; extern struct omap_hwmod_ocp_if am33xx_l4_ls__timer2; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tpcc; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc0; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc1; -extern struct omap_hwmod_ocp_if am33xx_l3_main__tptc2; extern struct omap_hwmod_ocp_if am33xx_l3_main__ocmc; extern struct omap_hwmod am33xx_l3_main_hwmod; @@ -42,7 +37,6 @@ extern struct omap_hwmod am33xx_l3_instr_hwmod; extern struct omap_hwmod am33xx_l4_ls_hwmod; extern struct omap_hwmod am33xx_l4_wkup_hwmod; extern struct omap_hwmod am33xx_mpu_hwmod; -extern struct omap_hwmod am33xx_pruss_hwmod; extern struct omap_hwmod am33xx_gfx_hwmod; extern struct omap_hwmod am33xx_prcm_hwmod; extern struct omap_hwmod am33xx_ocmcram_hwmod; @@ -52,10 +46,6 @@ extern struct omap_hwmod am33xx_gpmc_hwmod; extern struct omap_hwmod am33xx_rtc_hwmod; extern struct omap_hwmod am33xx_timer1_hwmod; extern struct omap_hwmod am33xx_timer2_hwmod; -extern struct omap_hwmod am33xx_tpcc_hwmod; -extern struct omap_hwmod am33xx_tptc0_hwmod; -extern struct omap_hwmod am33xx_tptc1_hwmod; -extern struct omap_hwmod am33xx_tptc2_hwmod; extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index ac7d5bb1a02f..0ebbfbb4fb1c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -74,14 +74,6 @@ struct omap_hwmod_ocp_if am33xx_l3_s__l3_main = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* pru-icss -> l3 main */ -struct omap_hwmod_ocp_if am33xx_pruss__l3_main = { - .master = &am33xx_pruss_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* gfx -> l3 main */ struct omap_hwmod_ocp_if am33xx_gfx__l3_main = { .master = &am33xx_gfx_hwmod, @@ -122,38 +114,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__timer2 = { .user = OCP_USER_MPU, }; -/* l3 main -> tpcc */ -struct omap_hwmod_ocp_if am33xx_l3_main__tpcc = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tpcc_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc0 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc0 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc0_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc1 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc1 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc1_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - -/* l3 main -> tpcc2 */ -struct omap_hwmod_ocp_if am33xx_l3_main__tptc2 = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_tptc2_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU, -}; - /* l3 main -> ocmc */ struct omap_hwmod_ocp_if am33xx_l3_main__ocmc = { .master = &am33xx_l3_main_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 78ec1bc8e3a1..dca5a3a7b97c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -133,34 +133,6 @@ struct omap_hwmod_class am33xx_wkup_m3_hwmod_class = { .name = "wkup_m3", }; -/* - * 'pru-icss' class - * Programmable Real-Time Unit and Industrial Communication Subsystem - */ -static struct omap_hwmod_class am33xx_pruss_hwmod_class = { - .name = "pruss", -}; - -static struct omap_hwmod_rst_info am33xx_pruss_resets[] = { - { .name = "pruss", .rst_shift = 1 }, -}; - -/* pru-icss */ -/* Pseudo hwmod for reset control purpose only */ -struct omap_hwmod am33xx_pruss_hwmod = { - .name = "pruss", - .class = &am33xx_pruss_hwmod_class, - .clkdm_name = "pruss_ocp_clkdm", - .main_clk = "pruss_ocp_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .rst_lines = am33xx_pruss_resets, - .rst_lines_cnt = ARRAY_SIZE(am33xx_pruss_resets), -}; - /* gfx */ /* Pseudo hwmod for reset control purpose only */ static struct omap_hwmod_class am33xx_gfx_hwmod_class = { @@ -393,80 +365,6 @@ struct omap_hwmod am33xx_timer2_hwmod = { }, }; -/* tpcc */ -static struct omap_hwmod_class am33xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -struct omap_hwmod am33xx_tpcc_hwmod = { - .name = "tpcc", - .class = &am33xx_tpcc_hwmod_class, - .clkdm_name = "l3_clkdm", - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_class_sysconfig am33xx_tptc_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x10, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_SMART | MSTANDBY_FORCE), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -/* 'tptc' class */ -static struct omap_hwmod_class am33xx_tptc_hwmod_class = { - .name = "tptc", - .sysc = &am33xx_tptc_sysc, -}; - -/* tptc0 */ -struct omap_hwmod am33xx_tptc0_hwmod = { - .name = "tptc0", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc1 */ -struct omap_hwmod am33xx_tptc1_hwmod = { - .name = "tptc1", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* tptc2 */ -struct omap_hwmod am33xx_tptc2_hwmod = { - .name = "tptc2", - .class = &am33xx_tptc_hwmod_class, - .clkdm_name = "l3_clkdm", - .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), - .main_clk = "l3_gclk", - .prcm = { - .omap4 = { - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - static void omap_hwmod_am33xx_clkctrl(void) { CLKCTRL(am33xx_timer2_hwmod, AM33XX_CM_PER_TIMER2_CLKCTRL_OFFSET); @@ -481,12 +379,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM33XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tpcc_hwmod, AM33XX_CM_PER_TPCC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc0_hwmod, AM33XX_CM_PER_TPTC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc1_hwmod, AM33XX_CM_PER_TPTC1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc2_hwmod, AM33XX_CM_PER_TPTC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gfx_hwmod, AM33XX_CM_GFX_GFX_CLKCTRL_OFFSET); - CLKCTRL(am33xx_pruss_hwmod, AM33XX_CM_PER_PRUSS_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM33XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM33XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM33XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); @@ -494,7 +387,6 @@ static void omap_hwmod_am33xx_clkctrl(void) static void omap_hwmod_am33xx_rst(void) { - RSTCTRL(am33xx_pruss_hwmod, AM33XX_RM_PER_RSTCTRL_OFFSET); RSTCTRL(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTCTRL_OFFSET); RSTST(am33xx_gfx_hwmod, AM33XX_RM_GFX_RSTST_OFFSET); } @@ -518,12 +410,7 @@ static void omap_hwmod_am43xx_clkctrl(void) CLKCTRL(am33xx_l4_ls_hwmod, AM43XX_CM_PER_L4LS_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_wkup_hwmod, AM43XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_main_hwmod, AM43XX_CM_PER_L3_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tpcc_hwmod, AM43XX_CM_PER_TPCC_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc0_hwmod, AM43XX_CM_PER_TPTC0_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc1_hwmod, AM43XX_CM_PER_TPTC1_CLKCTRL_OFFSET); - CLKCTRL(am33xx_tptc2_hwmod, AM43XX_CM_PER_TPTC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gfx_hwmod, AM43XX_CM_GFX_GFX_CLKCTRL_OFFSET); - CLKCTRL(am33xx_pruss_hwmod, AM43XX_CM_PER_PRUSS_CLKCTRL_OFFSET); CLKCTRL(am33xx_mpu_hwmod , AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET); CLKCTRL(am33xx_l3_instr_hwmod , AM43XX_CM_PER_L3_INSTR_CLKCTRL_OFFSET); CLKCTRL(am33xx_ocmcram_hwmod , AM43XX_CM_PER_OCMCRAM_CLKCTRL_OFFSET); @@ -531,9 +418,7 @@ static void omap_hwmod_am43xx_clkctrl(void) static void omap_hwmod_am43xx_rst(void) { - RSTCTRL(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTCTRL_OFFSET); RSTCTRL(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTCTRL_OFFSET); - RSTST(am33xx_pruss_hwmod, AM43XX_RM_PER_RSTST_OFFSET); RSTST(am33xx_gfx_hwmod, AM43XX_RM_GFX_RSTST_OFFSET); } diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index f1ea8c604595..c64b735c8acc 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -233,14 +233,6 @@ static struct omap_hwmod_ocp_if am33xx_l4_wkup__wkup_m3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l4 hs -> pru-icss */ -static struct omap_hwmod_ocp_if am33xx_l4_hs__pruss = { - .master = &am33xx_l4_hs_hwmod, - .slave = &am33xx_pruss_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main -> debugss */ static struct omap_hwmod_ocp_if am33xx_l3_main__debugss = { .master = &am33xx_l3_main_hwmod, @@ -292,7 +284,6 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l3_instr, &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, - &am33xx_pruss__l3_main, &am33xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, &am33xx_l3_main__debugss, @@ -302,13 +293,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__smartreflex1, &am33xx_l4_wkup__timer1, &am33xx_l4_wkup__rtc, - &am33xx_l4_hs__pruss, &am33xx_l4_ls__timer2, - &am33xx_l3_main__tpcc, &am33xx_l3_s__gpmc, - &am33xx_l3_main__tptc0, - &am33xx_l3_main__tptc1, - &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index d0867dbd788e..d2203f44af88 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -156,75 +156,6 @@ static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = { }, }; -/* dss */ - -static struct omap_hwmod am43xx_dss_core_hwmod = { - .name = "dss_core", - .class = &omap2_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* dispc */ - -static struct omap_dss_dispc_dev_attr am43xx_dss_dispc_dev_attr = { - .manager_count = 1, - .has_framedonetv_irq = 0 -}; - -static struct omap_hwmod_class_sysconfig am43xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SOFTRESET | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_MIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class am43xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &am43xx_dispc_sysc, -}; - -static struct omap_hwmod am43xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &am43xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - }, - }, - .dev_attr = &am43xx_dss_dispc_dev_attr, - .parent_hwmod = &am43xx_dss_core_hwmod, -}; - -/* rfbi */ - -static struct omap_hwmod am43xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap2_rfbi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "disp_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = AM43XX_CM_PER_DSS_CLKCTRL_OFFSET, - }, - }, - .parent_hwmod = &am43xx_dss_core_hwmod, -}; - - /* Interfaces */ static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { .master = &am33xx_l3_main_hwmod, @@ -254,13 +185,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__wkup_m3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_l3_main__pruss = { - .master = &am33xx_l3_main_hwmod, - .slave = &am33xx_pruss_hwmod, - .clk = "dpll_core_m4_ck", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_wkup__smartreflex0 = { .master = &am33xx_l4_wkup_hwmod, .slave = &am33xx_smartreflex0_hwmod, @@ -310,37 +234,8 @@ static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_ocp_if am43xx_dss__l3_main = { - .master = &am43xx_dss_core_hwmod, - .slave = &am33xx_l3_main_hwmod, - .clk = "l3_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_core_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_dispc = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_dispc_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if am43xx_l4_ls__dss_rfbi = { - .master = &am33xx_l4_ls_hwmod, - .slave = &am43xx_dss_rfbi_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_wkup__synctimer, - &am43xx_l3_main__pruss, &am33xx_mpu__l3_main, &am33xx_mpu__prcm, &am33xx_l3_s__l4_ls, @@ -351,7 +246,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, &am43xx_l3_main__emif, - &am33xx_pruss__l3_main, &am43xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, &am43xx_l4_wkup__wkup_m3, @@ -360,18 +254,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_wkup__smartreflex1, &am43xx_l4_wkup__timer1, &am33xx_l4_ls__timer2, - &am33xx_l3_main__tpcc, &am33xx_l3_s__gpmc, - &am33xx_l3_main__tptc0, - &am33xx_l3_main__tptc1, - &am33xx_l3_main__tptc2, &am33xx_l3_main__ocmc, &am43xx_l3_s__usbotgss0, &am43xx_l3_s__usbotgss1, - &am43xx_dss__l3_main, - &am43xx_l4_ls__dss, - &am43xx_l4_ls__dss_dispc, - &am43xx_l4_ls__dss_rfbi, NULL, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index b7c51ea8c9a6..33f6596c03f7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -356,306 +356,6 @@ static struct omap_hwmod omap44xx_debugss_hwmod = { }; /* - * 'dsp' class - * dsp sub-system - */ - -static struct omap_hwmod_class omap44xx_dsp_hwmod_class = { - .name = "dsp", -}; - -/* dsp */ -static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = { - { .name = "dsp", .rst_shift = 0 }, -}; - -static struct omap_hwmod omap44xx_dsp_hwmod = { - .name = "dsp", - .class = &omap44xx_dsp_hwmod_class, - .clkdm_name = "tesla_clkdm", - .rst_lines = omap44xx_dsp_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_resets), - .main_clk = "dpll_iva_m4x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, - .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, - .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class omap44xx_dss_hwmod_class = { - .name = "dss", - .sysc = &omap44xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "tv_clk", .clk = "dss_tv_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_hwmod = { - .name = "dss_core", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .class = &omap44xx_dss_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap44xx_dispc_sysc, -}; - -/* dss_dispc */ -static struct omap_dss_dispc_dev_attr omap44xx_dss_dispc_dev_attr = { - .manager_count = 3, - .has_framedonetv_irq = 1 -}; - -static struct omap_hwmod omap44xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap44xx_dispc_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .dev_attr = &omap44xx_dss_dispc_dev_attr, - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'dsi' class - * display serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_dsi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { - .name = "dsi", - .sysc = &omap44xx_dsi_sysc, -}; - -/* dss_dsi1 */ -static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { - .name = "dss_dsi1", - .class = &omap44xx_dsi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_dsi1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* dss_dsi2 */ -static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { - .name = "dss_dsi2", - .class = &omap44xx_dsi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_dsi2_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig omap44xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &omap44xx_hdmi_sysc, -}; - -/* dss_hdmi */ -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &omap44xx_hdmi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - /* - * HDMI audio requires to use no-idle mode. Hence, - * set idle mode by software. - */ - .flags = HWMOD_SWSUP_SIDLE | HWMOD_OPT_CLKS_NEEDED, - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap44xx_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap44xx_rfbi_sysc, -}; - -/* dss_rfbi */ -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "l3_div_ck" }, -}; - -static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap44xx_rfbi_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .parent_hwmod = &omap44xx_dss_hwmod, -}; - -/* - * 'venc' class - * video encoder - */ - -static struct omap_hwmod_class omap44xx_venc_hwmod_class = { - .name = "venc", -}; - -/* dss_venc */ -static struct omap_hwmod_opt_clk dss_venc_opt_clks[] = { - { .role = "tv_clk", .clk = "dss_tv_clk" }, -}; - -static struct omap_hwmod omap44xx_dss_venc_hwmod = { - .name = "dss_venc", - .class = &omap44xx_venc_hwmod_class, - .clkdm_name = "l3_dss_clkdm", - .main_clk = "dss_tv_clk", - .flags = HWMOD_OPT_CLKS_NEEDED, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, - }, - }, - .parent_hwmod = &omap44xx_dss_hwmod, - .opt_clks = dss_venc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_venc_opt_clks), -}; - - - -/* * 'emif' class * external memory interface no1 */ @@ -737,39 +437,6 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { }, }; - -/* - * 'ipu' class - * imaging processor unit - */ - -static struct omap_hwmod_class omap44xx_ipu_hwmod_class = { - .name = "ipu", -}; - -/* ipu */ -static struct omap_hwmod_rst_info omap44xx_ipu_resets[] = { - { .name = "cpu0", .rst_shift = 0 }, - { .name = "cpu1", .rst_shift = 1 }, -}; - -static struct omap_hwmod omap44xx_ipu_hwmod = { - .name = "ipu", - .class = &omap44xx_ipu_hwmod_class, - .clkdm_name = "ducati_clkdm", - .rst_lines = omap44xx_ipu_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets), - .main_clk = "ducati_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, - .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, - .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - /* * 'iss' class * external images sensor pixel data processor @@ -1236,22 +903,6 @@ static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* dss -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_dss__l3_main_1 = { - .master = &omap44xx_dss_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { .master = &omap44xx_l3_main_2_hwmod, @@ -1284,14 +935,6 @@ static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* ipu -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_ipu__l3_main_2 = { - .master = &omap44xx_ipu_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* iss -> l3_main_2 */ static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { .master = &omap44xx_iss_hwmod, @@ -1364,14 +1007,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_l4_abe_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> l4_abe */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = { .master = &omap44xx_l3_main_1_hwmod, @@ -1476,142 +1111,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* dsp -> iva */ -static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_iva_hwmod, - .clk = "dpll_iva_m5x2_ck", - .user = OCP_USER_DSP, -}; - -/* dsp -> sl2if */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { - .master = &omap44xx_dsp_hwmod, - .slave = &omap44xx_sl2if_hwmod, - .clk = "dpll_iva_m5x2_ck", - .user = OCP_USER_DSP, -}; - -/* l4_cfg -> dsp */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_dsp_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dispc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dsi1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_dsi2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* l4_per -> dss_venc */ -static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { - .master = &omap44xx_l4_per_hwmod, - .slave = &omap44xx_dss_venc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU, -}; - /* l3_main_2 -> gpmc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .master = &omap44xx_l3_main_2_hwmod, @@ -1620,14 +1119,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__gpmc = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_2 -> ipu */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ipu = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_ipu_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_2 -> iss */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { .master = &omap44xx_l3_main_2_hwmod, @@ -1762,13 +1253,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_instr, &omap44xx_l3_main_3__l3_instr, &omap44xx_ocp_wp_noc__l3_instr, - &omap44xx_dsp__l3_main_1, - &omap44xx_dss__l3_main_1, &omap44xx_l3_main_2__l3_main_1, &omap44xx_l4_cfg__l3_main_1, &omap44xx_mpu__l3_main_1, &omap44xx_debugss__l3_main_2, - &omap44xx_ipu__l3_main_2, &omap44xx_iss__l3_main_2, &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, @@ -1778,7 +1266,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, &omap44xx_l3_main_1__l4_cfg, @@ -1792,25 +1279,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_wkup__ctrl_module_wkup, &omap44xx_l4_wkup__ctrl_module_pad_wkup, &omap44xx_l3_instr__debugss, - &omap44xx_dsp__iva, - /* &omap44xx_dsp__sl2if, */ - &omap44xx_l4_cfg__dsp, - &omap44xx_l3_main_2__dss, - &omap44xx_l4_per__dss, - &omap44xx_l3_main_2__dss_dispc, - &omap44xx_l4_per__dss_dispc, - &omap44xx_l3_main_2__dss_dsi1, - &omap44xx_l4_per__dss_dsi1, - &omap44xx_l3_main_2__dss_dsi2, - &omap44xx_l4_per__dss_dsi2, - &omap44xx_l3_main_2__dss_hdmi, - &omap44xx_l4_per__dss_hdmi, - &omap44xx_l3_main_2__dss_rfbi, - &omap44xx_l4_per__dss_rfbi, - &omap44xx_l3_main_2__dss_venc, - &omap44xx_l4_per__dss_venc, &omap44xx_l3_main_2__gpmc, - &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index ad398f6bc011..08f34f4732fd 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -227,240 +227,6 @@ static struct omap_hwmod omap54xx_counter_32k_hwmod = { }; /* - * 'dss' class - * display sub-system - */ -static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class omap54xx_dss_hwmod_class = { - .name = "dss", - .sysc = &omap54xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "32khz_clk", .clk = "dss_32khz_clk" }, - { .role = "sys_clk", .clk = "dss_sys_clk" }, - { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_hwmod = { - .name = "dss_core", - .class = &omap54xx_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap54xx_dispc_sysc, -}; - -/* dss_dispc */ -static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -/* dss_dispc dev_attr */ -static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { - .has_framedonetv_irq = 1, - .manager_count = 4, -}; - -static struct omap_hwmod omap54xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &omap54xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dispc_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), - .dev_attr = &dss_dispc_dev_attr, - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'dsi1' class - * display serial interface controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = { - .name = "dsi1", - .sysc = &omap54xx_dsi1_sysc, -}; - -/* dss_dsi1_a */ -static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { - .name = "dss_dsi1", - .class = &omap54xx_dsi1_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dsi1_a_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* dss_dsi1_c */ -static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { - .name = "dss_dsi2", - .class = &omap54xx_dsi1_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_dsi1_c_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &omap54xx_hdmi_sysc, -}; - -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_sys_clk" }, -}; - -static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &omap54xx_hdmi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap54xx_rfbi_sysc, -}; - -/* dss_rfbi */ -static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { - { .role = "ick", .clk = "l3_iclk_div" }, -}; - -static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { - .name = "dss_rfbi", - .class = &omap54xx_rfbi_hwmod_class, - .clkdm_name = "dss_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_rfbi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), - .parent_hwmod = &omap54xx_dss_hwmod, -}; - -/* * 'emif' class * external memory interface no1 (wrapper) */ @@ -908,54 +674,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_wkup__counter_32k = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_2 -> dss */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dispc */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dispc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dsi1_a */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dsi1_a_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_dsi1_c */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_dsi1_c_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_hdmi */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_hdmi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> dss_rfbi */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_dss_rfbi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -1030,12 +748,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l3_main_1__l4_wkup, &omap54xx_mpu__mpu_private, &omap54xx_l4_wkup__counter_32k, - &omap54xx_l3_main_2__dss, - &omap54xx_l3_main_2__dss_dispc, - &omap54xx_l3_main_2__dss_dsi1_a, - &omap54xx_l3_main_2__dss_dsi1_c, - &omap54xx_l3_main_2__dss_hdmi, - &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_cfg__mpu, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index acef3733db4c..e95668bdbc3f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -277,203 +277,6 @@ static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { }; /* - * 'tpcc' class - * - */ -static struct omap_hwmod_class dra7xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -static struct omap_hwmod dra7xx_tpcc_hwmod = { - .name = "tpcc", - .class = &dra7xx_tpcc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPCC_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPCC_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'tptc' class - * - */ -static struct omap_hwmod_class dra7xx_tptc_hwmod_class = { - .name = "tptc", -}; - -/* tptc0 */ -static struct omap_hwmod dra7xx_tptc0_hwmod = { - .name = "tptc0", - .class = &dra7xx_tptc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPTC1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* tptc1 */ -static struct omap_hwmod dra7xx_tptc1_hwmod = { - .name = "tptc1", - .class = &dra7xx_tptc_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_TPTC2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_TPTC2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'dss' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_dss_sysc = { - .rev_offs = 0x0000, - .syss_offs = 0x0014, - .sysc_flags = SYSS_HAS_RESET_STATUS, -}; - -static struct omap_hwmod_class dra7xx_dss_hwmod_class = { - .name = "dss", - .sysc = &dra7xx_dss_sysc, - .reset = omap_dss_reset, -}; - -/* dss */ -static struct omap_hwmod_opt_clk dss_opt_clks[] = { - { .role = "dss_clk", .clk = "dss_dss_clk" }, - { .role = "hdmi_phy_clk", .clk = "dss_48mhz_clk" }, - { .role = "32khz_clk", .clk = "dss_32khz_clk" }, - { .role = "video2_clk", .clk = "dss_video2_clk" }, - { .role = "video1_clk", .clk = "dss_video1_clk" }, - { .role = "hdmi_clk", .clk = "dss_hdmi_clk" }, - { .role = "hdcp_clk", .clk = "dss_deshdcp_clk" }, -}; - -static struct omap_hwmod dra7xx_dss_hwmod = { - .name = "dss_core", - .class = &dra7xx_dss_hwmod_class, - .clkdm_name = "dss_clkdm", - .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_DSS_DSS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = dss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), -}; - -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig dra7xx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class dra7xx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &dra7xx_dispc_sysc, -}; - -/* dss_dispc */ -/* dss_dispc dev_attr */ -static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { - .has_framedonetv_irq = 1, - .manager_count = 4, -}; - -static struct omap_hwmod dra7xx_dss_dispc_hwmod = { - .name = "dss_dispc", - .class = &dra7xx_dispc_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_dss_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .dev_attr = &dss_dispc_dev_attr, - .parent_hwmod = &dra7xx_dss_hwmod, -}; - -/* - * 'hdmi' class - * hdmi controller - */ - -static struct omap_hwmod_class_sysconfig dra7xx_hdmi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_hdmi_hwmod_class = { - .name = "hdmi", - .sysc = &dra7xx_hdmi_sysc, -}; - -/* dss_hdmi */ - -static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { - { .role = "sys_clk", .clk = "dss_hdmi_clk" }, -}; - -static struct omap_hwmod dra7xx_dss_hdmi_hwmod = { - .name = "dss_hdmi", - .class = &dra7xx_hdmi_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dss_48mhz_clk", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_DSS_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, - .opt_clks = dss_hdmi_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), - .parent_hwmod = &dra7xx_dss_hwmod, -}; - - - - - -/* * 'gpmc' class * */ @@ -1077,54 +880,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* l3_main_1 -> tpcc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tpcc = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tpcc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> tptc0 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc0 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tptc0_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> tptc1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_tptc1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> dss */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> dispc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_dispc_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> dispc */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dss_hdmi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - /* l3_main_1 -> gpmc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__gpmc = { .master = &dra7xx_l3_main_1_hwmod, @@ -1309,12 +1064,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { &dra7xx_l3_main_1__bb2d, &dra7xx_l4_wkup__counter_32k, &dra7xx_l4_wkup__ctrl_module_wkup, - &dra7xx_l3_main_1__tpcc, - &dra7xx_l3_main_1__tptc0, - &dra7xx_l3_main_1__tptc1, - &dra7xx_l3_main_1__dss, - &dra7xx_l3_main_1__dispc, - &dra7xx_l3_main_1__hdmi, &dra7xx_l3_main_1__gpmc, &dra7xx_l4_cfg__mpu, &dra7xx_l3_main_1__pciess1, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 83230d9ce5ed..6a9f1ad9d413 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -129,13 +129,6 @@ static struct omap_hwmod dm81xx_alwon_l3_med_hwmod = { .flags = HWMOD_NO_IDLEST, }; -static struct omap_hwmod dm81xx_alwon_l3_fast_hwmod = { - .name = "l3_fast", - .clkdm_name = "alwon_l3_fast_clkdm", - .class = &l3_hwmod_class, - .flags = HWMOD_NO_IDLEST, -}; - /* * L4 standard peripherals, see TRM table 1-12 for devices using this. * See TRM table 1-73 for devices using the 125MHz SYSCLK6 clock. @@ -867,62 +860,6 @@ static struct omap_hwmod_ocp_if dm816x_l4_ls__timer7 = { .user = OCP_USER_MPU, }; -/* CPSW on dm814x */ -static struct omap_hwmod_class_sysconfig dm814x_cpgmac_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x8, - .syss_offs = 0x4, - .sysc_flags = SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSS_HAS_RESET_STATUS, - .idlemodes = SIDLE_FORCE | SIDLE_NO | MSTANDBY_FORCE | - MSTANDBY_NO, - .sysc_fields = &omap_hwmod_sysc_type3, -}; - -static struct omap_hwmod_class dm814x_cpgmac0_hwmod_class = { - .name = "cpgmac0", - .sysc = &dm814x_cpgmac_sysc, -}; - -static struct omap_hwmod dm814x_cpgmac0_hwmod = { - .name = "cpgmac0", - .class = &dm814x_cpgmac0_hwmod_class, - .clkdm_name = "alwon_ethernet_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "cpsw_125mhz_gclk", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_ETHERNET_0_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_class dm814x_mdio_hwmod_class = { - .name = "davinci_mdio", -}; - -static struct omap_hwmod dm814x_mdio_hwmod = { - .name = "davinci_mdio", - .class = &dm814x_mdio_hwmod_class, - .clkdm_name = "alwon_ethernet_clkdm", - .main_clk = "cpsw_125mhz_gclk", -}; - -static struct omap_hwmod_ocp_if dm814x_l4_hs__cpgmac0 = { - .master = &dm81xx_l4_hs_hwmod, - .slave = &dm814x_cpgmac0_hwmod, - .clk = "cpsw_125mhz_gclk", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm814x_cpgmac0__mdio = { - .master = &dm814x_cpgmac0_hwmod, - .slave = &dm814x_mdio_hwmod, - .user = OCP_USER_MPU, - .flags = HWMOD_NO_IDLEST, -}; - /* EMAC Ethernet */ static struct omap_hwmod_class_sysconfig dm816x_emac_sysc = { .rev_offs = 0x0, @@ -1321,154 +1258,6 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { - .name = "tpcc", -}; - -static struct omap_hwmod dm81xx_tpcc_hwmod = { - .name = "tpcc", - .class = &dm81xx_tpcc_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPCC_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tpcc = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tpcc_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc0_hwmod_class = { - .name = "tptc0", -}; - -static struct omap_hwmod dm81xx_tptc0_hwmod = { - .name = "tptc0", - .class = &dm81xx_tptc0_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC0_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc0 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc0_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc0__alwon_l3_fast = { - .master = &dm81xx_tptc0_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc1_hwmod_class = { - .name = "tptc1", -}; - -static struct omap_hwmod dm81xx_tptc1_hwmod = { - .name = "tptc1", - .class = &dm81xx_tptc1_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC1_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc1 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc1_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc1__alwon_l3_fast = { - .master = &dm81xx_tptc1_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc2_hwmod_class = { - .name = "tptc2", -}; - -static struct omap_hwmod dm81xx_tptc2_hwmod = { - .name = "tptc2", - .class = &dm81xx_tptc2_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC2_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc2 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc2_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc2__alwon_l3_fast = { - .master = &dm81xx_tptc2_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_class dm81xx_tptc3_hwmod_class = { - .name = "tptc3", -}; - -static struct omap_hwmod dm81xx_tptc3_hwmod = { - .name = "tptc3", - .class = &dm81xx_tptc3_hwmod_class, - .clkdm_name = "alwon_l3s_clkdm", - .main_clk = "sysclk4_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DM81XX_CM_ALWON_TPTC3_CLKCTRL, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -static struct omap_hwmod_ocp_if dm81xx_alwon_l3_fast__tptc3 = { - .master = &dm81xx_alwon_l3_fast_hwmod, - .slave = &dm81xx_tptc3_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - -static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { - .master = &dm81xx_tptc3_hwmod, - .slave = &dm81xx_alwon_l3_fast_hwmod, - .clk = "sysclk4_ck", - .user = OCP_USER_MPU, -}; - /* * REVISIT: Test and enable the following once clocks work: * dm81xx_l4_ls__mailbox @@ -1499,19 +1288,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm814x_l4_ls__mmc1, &dm814x_l4_ls__mmc2, &ti81xx_l4_ls__rtc, - &dm81xx_alwon_l3_fast__tpcc, - &dm81xx_alwon_l3_fast__tptc0, - &dm81xx_alwon_l3_fast__tptc1, - &dm81xx_alwon_l3_fast__tptc2, - &dm81xx_alwon_l3_fast__tptc3, - &dm81xx_tptc0__alwon_l3_fast, - &dm81xx_tptc1__alwon_l3_fast, - &dm81xx_tptc2__alwon_l3_fast, - &dm81xx_tptc3__alwon_l3_fast, &dm814x_l4_ls__timer1, &dm814x_l4_ls__timer2, - &dm814x_l4_hs__cpgmac0, - &dm814x_cpgmac0__mdio, &dm81xx_alwon_l3_slow__gpmc, &dm814x_default_l3_slow__usbss, &dm814x_alwon_l3_med__mmc3, @@ -1554,15 +1332,6 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, &dm81xx_l4_hs__sata, - &dm81xx_alwon_l3_fast__tpcc, - &dm81xx_alwon_l3_fast__tptc0, - &dm81xx_alwon_l3_fast__tptc1, - &dm81xx_alwon_l3_fast__tptc2, - &dm81xx_alwon_l3_fast__tptc3, - &dm81xx_tptc0__alwon_l3_fast, - &dm81xx_tptc1__alwon_l3_fast, - &dm81xx_tptc2__alwon_l3_fast, - &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, &dm816x_default_l3_slow__usbss, NULL, |