summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 12:50:35 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2017-11-16 12:50:35 -0800
commit441692aafc1731087bbaf657a8b6059d95c2a6df (patch)
tree9d3dd6d6e882bc9bb69e3389715b720ee9001ead /arch/arm
parent5b0e2cb020085efe202123162502e0b551e49a0e (diff)
parent02196144a0a0ad71fb75bd4a5a4785ab36c3b78e (diff)
downloadlinux-441692aafc1731087bbaf657a8b6059d95c2a6df.tar.bz2
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King: - add support for ELF fdpic binaries on both MMU and noMMU platforms - linker script cleanups - support for compressed .data section for XIP images - discard memblock arrays when possible - various cleanups - atomic DMA pool updates - better diagnostics of missing/corrupt device tree - export information to allow userspace kexec tool to place images more inteligently, so that the device tree isn't overwritten by the booting kernel - make early_printk more efficient on semihosted systems - noMMU cleanups - SA1111 PCMCIA update in preparation for further cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits) ARM: 8719/1: NOMMU: work around maybe-uninitialized warning ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r" ARM: 8713/1: NOMMU: Support MPU in XIP configuration ARM: 8712/1: NOMMU: Use more MPU regions to cover memory ARM: 8711/1: V7M: Add support for MPU to M-class ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE ARM: 8709/1: NOMMU: Disallow MPU for XIP ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers ARM: 8706/1: NOMMU: Move out MPU setup in separate module ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel() ARM: 8705/1: early_printk: use printascii() rather than printch() ARM: 8703/1: debug.S: move hexbuf to a writable section ARM: add additional table to compressed kernel ARM: decompressor: fix BSS size calculation pcmcia: sa1111: remove special sa1111 mmio accessors pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources ARM: better diagnostics with missing/corrupt dtb ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size() ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init ..
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig21
-rw-r--r--arch/arm/Kconfig-nommu4
-rw-r--r--arch/arm/boot/Makefile13
-rw-r--r--arch/arm/boot/compressed/Makefile7
-rw-r--r--arch/arm/boot/compressed/head.S2
-rw-r--r--arch/arm/boot/compressed/vmlinux.lds.S11
-rwxr-xr-xarch/arm/boot/deflate_xip_data.sh64
-rw-r--r--arch/arm/include/asm/cputype.h10
-rw-r--r--arch/arm/include/asm/dma-mapping.h7
-rw-r--r--arch/arm/include/asm/elf.h16
-rw-r--r--arch/arm/include/asm/highmem.h1
-rw-r--r--arch/arm/include/asm/mmu.h8
-rw-r--r--arch/arm/include/asm/mpu.h26
-rw-r--r--arch/arm/include/asm/processor.h22
-rw-r--r--arch/arm/include/asm/smp.h2
-rw-r--r--arch/arm/include/asm/ucontext.h1
-rw-r--r--arch/arm/include/asm/v7m.h10
-rw-r--r--arch/arm/include/uapi/asm/ptrace.h4
-rw-r--r--arch/arm/include/uapi/asm/unistd.h1
-rw-r--r--arch/arm/kernel/Makefile5
-rw-r--r--arch/arm/kernel/asm-offsets.c15
-rw-r--r--arch/arm/kernel/atags_parse.c7
-rw-r--r--arch/arm/kernel/debug.S39
-rw-r--r--arch/arm/kernel/early_printk.c16
-rw-r--r--arch/arm/kernel/elf.c24
-rw-r--r--arch/arm/kernel/entry-common.S9
-rw-r--r--arch/arm/kernel/head-common.S86
-rw-r--r--arch/arm/kernel/head-inflate-data.c62
-rw-r--r--arch/arm/kernel/head-nommu.S148
-rw-r--r--arch/arm/kernel/setup.c10
-rw-r--r--arch/arm/kernel/signal.c53
-rw-r--r--arch/arm/kernel/signal.h11
-rw-r--r--arch/arm/kernel/sigreturn_codes.S56
-rw-r--r--arch/arm/kernel/smp.c2
-rw-r--r--arch/arm/kernel/traps.c3
-rw-r--r--arch/arm/kernel/vmlinux-xip.lds.S115
-rw-r--r--arch/arm/kernel/vmlinux.lds.S40
-rw-r--r--arch/arm/mm/Makefile1
-rw-r--r--arch/arm/mm/dma-mapping.c21
-rw-r--r--arch/arm/mm/init.c10
-rw-r--r--arch/arm/mm/nommu.c254
-rw-r--r--arch/arm/mm/pmsa-v7.c484
42 files changed, 1180 insertions, 521 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d1346a160760..4f3ee0ef8fa7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -3,6 +3,7 @@ config ARM
bool
default y
select ARCH_CLOCKSOURCE_DATA
+ select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ELF_RANDOMIZE
@@ -240,15 +241,6 @@ config NEED_RET_TO_USER
config ARCH_MTD_XIP
bool
-config VECTORS_BASE
- hex
- default 0xffff0000 if MMU || CPU_HIGH_VECTOR
- default DRAM_BASE if REMAP_VECTORS_TO_RAM
- default 0x00000000
- help
- The base address of exception vectors. This must be two pages
- in size.
-
config ARM_PATCH_PHYS_VIRT
bool "Patch physical to virtual translations at runtime" if EMBEDDED
default y
@@ -2006,6 +1998,17 @@ config XIP_PHYS_ADDR
be linked for and stored to. This address is dependent on your
own flash usage.
+config XIP_DEFLATED_DATA
+ bool "Store kernel .data section compressed in ROM"
+ depends on XIP_KERNEL
+ select ZLIB_INFLATE
+ help
+ Before the kernel is actually executed, its .data section has to be
+ copied to RAM from ROM. This option allows for storing that data
+ in compressed form and decompressed to RAM rather than merely being
+ copied, saving some precious ROM space. A possible drawback is a
+ slightly longer boot delay.
+
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 22f34c423be6..1168a03c8525 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -53,8 +53,8 @@ config REMAP_VECTORS_TO_RAM
config ARM_MPU
bool 'Use the ARM v7 PMSA Compliant MPU'
- depends on CPU_V7
- default y
+ depends on CPU_V7 || CPU_V7M
+ default y if CPU_V7
help
Some ARM systems without an MMU have instead a Memory Protection
Unit (MPU) that defines the type and permissions for regions of
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 50f8d1be7fcb..a3af4dc08c3e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -31,8 +31,19 @@ targets := Image zImage xipImage bootpImage uImage
ifeq ($(CONFIG_XIP_KERNEL),y)
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c \
+ '$(srctree)/$(src)/deflate_xip_data.sh $< $@ || { rm -f $@; false; }'
+
+ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
+quiet_cmd_mkxip = XIPZ $@
+cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data)
+else
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+endif
+
$(obj)/xipImage: vmlinux FORCE
- $(call if_changed,objcopy)
+ $(call if_changed,mkxip)
@$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
$(obj)/Image $(obj)/zImage: FORCE
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index a5889238fc9f..45a6b9b7af2a 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -117,8 +117,11 @@ ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
- awk 'END{print $$3}')
+KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
+ perl -e 'while (<>) { \
+ $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \
+ $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \
+ }; printf "%d\n", $$bss_end - $$bss_start;')
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 8a756870c238..45c8823c3750 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -143,6 +143,8 @@ start:
.word _magic_start @ absolute load/run zImage address
.word _magic_end @ zImage end address
.word 0x04030201 @ endianness flag
+ .word 0x45454545 @ another magic number to indicate
+ .word _magic_table @ additional data table
__EFI_HEADER
1:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 7d06aa19c3e6..e6bf6774c4bb 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -44,12 +44,22 @@ SECTIONS
*(.glue_7t)
*(.glue_7)
}
+ .table : ALIGN(4) {
+ _table_start = .;
+ LONG(ZIMAGE_MAGIC(2))
+ LONG(ZIMAGE_MAGIC(0x5a534c4b))
+ LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+ LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+ LONG(0)
+ _table_end = .;
+ }
.rodata : {
*(.rodata)
*(.rodata.*)
}
.piggydata : {
*(.piggydata)
+ __piggy_size_addr = . - 4;
}
. = ALIGN(4);
@@ -97,6 +107,7 @@ SECTIONS
_magic_sig = ZIMAGE_MAGIC(0x016f2818);
_magic_start = ZIMAGE_MAGIC(_start);
_magic_end = ZIMAGE_MAGIC(_edata);
+ _magic_table = ZIMAGE_MAGIC(_table_start - _start);
. = BSS_START;
__bss_start = .;
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
new file mode 100755
index 000000000000..1189598a25eb
--- /dev/null
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -0,0 +1,64 @@
+#!/bin/sh
+
+# XIP kernel .data segment compressor
+#
+# Created by: Nicolas Pitre, August 2017
+# Copyright: (C) 2017 Linaro Limited
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License version 2 as
+# published by the Free Software Foundation.
+
+# This script locates the start of the .data section in xipImage and
+# substitutes it with a compressed version. The needed offsets are obtained
+# from symbol addresses in vmlinux. It is expected that .data extends to
+# the end of xipImage.
+
+set -e
+
+VMLINUX="$1"
+XIPIMAGE="$2"
+
+DD="dd status=none"
+
+# Use "make V=1" to debug this script.
+case "$KBUILD_VERBOSE" in
+*1*)
+ set -x
+ ;;
+esac
+
+sym_val() {
+ # extract hex value for symbol in $1
+ local val=$($NM "$VMLINUX" | sed -n "/ $1$/{s/ .*$//p;q}")
+ [ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; }
+ # convert from hex to decimal
+ echo $((0x$val))
+}
+
+__data_loc=$(sym_val __data_loc)
+_edata_loc=$(sym_val _edata_loc)
+base_offset=$(sym_val _xiprom)
+
+# convert to file based offsets
+data_start=$(($__data_loc - $base_offset))
+data_end=$(($_edata_loc - $base_offset))
+
+# Make sure data occupies the last part of the file.
+file_end=$(stat -c "%s" "$XIPIMAGE")
+if [ "$file_end" != "$data_end" ]; then
+ printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
+ $(($file_end + $base_offset)) $_edata_loc 2>&1
+ exit 1;
+fi
+
+# be ready to clean up
+trap 'rm -f "$XIPIMAGE.tmp"' 0 1 2 3
+
+# substitute the data section by a compressed version
+$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
+$DD if="$XIPIMAGE" skip=$data_start iflag=skip_bytes |
+gzip -9 >> "$XIPIMAGE.tmp"
+
+# replace kernel binary
+mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index 441933311bbf..cb546425da8a 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -174,6 +174,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
return read_cpuid(CPUID_CACHETYPE);
}
+static inline unsigned int __attribute_const__ read_cpuid_mputype(void)
+{
+ return read_cpuid(CPUID_MPUIR);
+}
+
#elif defined(CONFIG_CPU_V7M)
static inline unsigned int __attribute_const__ read_cpuid_id(void)
@@ -186,6 +191,11 @@ static inline unsigned int __attribute_const__ read_cpuid_cachetype(void)
return readl(BASEADDR_V7M_SCB + V7M_SCB_CTR);
}
+static inline unsigned int __attribute_const__ read_cpuid_mputype(void)
+{
+ return readl(BASEADDR_V7M_SCB + MPU_TYPE);
+}
+
#else /* ifdef CONFIG_CPU_CP15 / elif defined(CONFIG_CPU_V7M) */
static inline unsigned int __attribute_const__ read_cpuid_id(void)
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 3ca119997818..daf837423a76 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -191,13 +191,6 @@ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
unsigned long attrs);
/*
- * This can be called during early boot to increase the size of the atomic
- * coherent DMA pool above the default value of 256KiB. It must be called
- * before postcore_initcall.
- */
-extern void __init init_dma_coherent_pool_size(unsigned long size);
-
-/*
* For SA-1111, IXP425, and ADI systems the dma-mapping functions are "magic"
* and utilize bounce buffers as needed to work around limited DMA windows.
*
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 8c5ca92a87a9..b078d992414b 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -101,10 +101,15 @@ struct elf32_hdr;
extern int elf_check_arch(const struct elf32_hdr *);
#define elf_check_arch elf_check_arch
+#define ELFOSABI_ARM_FDPIC 65 /* ARM FDPIC platform */
+#define elf_check_fdpic(x) ((x)->e_ident[EI_OSABI] == ELFOSABI_ARM_FDPIC)
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_ARM_PIC)
+#define ELF_FDPIC_CORE_EFLAGS 0
+
#define vmcore_elf64_check_arch(x) (0)
-extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
-#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+extern int arm_elf_read_implies_exec(int);
+#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(stk)
struct task_struct;
int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
@@ -121,6 +126,13 @@ int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
have no such handler. */
#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, dynamic_addr) \
+ do { \
+ (_r)->ARM_r7 = _exec_map_addr; \
+ (_r)->ARM_r8 = _interp_map_addr; \
+ (_r)->ARM_r9 = dynamic_addr; \
+ } while(0)
+
extern void elf_set_personality(const struct elf32_hdr *);
#define SET_PERSONALITY(ex) elf_set_personality(&(ex))
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index b03d3fa2e58d..eb4e4207cd3c 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -19,7 +19,6 @@
} while (0)
extern pte_t *pkmap_page_table;
-extern pte_t *fixmap_page_table;
extern void *kmap_high(struct page *page);
extern void kunmap_high(struct page *page);
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 65669b9ce128..1592a4264488 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -15,6 +15,10 @@ typedef struct {
#ifdef CONFIG_VDSO
unsigned long vdso;
#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
} mm_context_t;
#ifdef CONFIG_CPU_HAS_ASID
@@ -34,6 +38,10 @@ typedef struct {
*/
typedef struct {
unsigned long end_brk;
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
} mm_context_t;
#endif
diff --git a/arch/arm/include/asm/mpu.h b/arch/arm/include/asm/mpu.h
index 0c3f774fa4b5..6d1491c8ee22 100644
--- a/arch/arm/include/asm/mpu.h
+++ b/arch/arm/include/asm/mpu.h
@@ -2,8 +2,6 @@
#ifndef __ARM_MPU_H
#define __ARM_MPU_H
-#ifdef CONFIG_ARM_MPU
-
/* MPUIR layout */
#define MPUIR_nU 1
#define MPUIR_DREGION 8
@@ -18,6 +16,11 @@
/* MPU D/I Size Register fields */
#define MPU_RSR_SZ 1
#define MPU_RSR_EN 0
+#define MPU_RSR_SD 8
+
+/* Number of subregions (SD) */
+#define MPU_NR_SUBREGS 8
+#define MPU_MIN_SUBREG_SIZE 256
/* The D/I RSR value for an enabled region spanning the whole of memory */
#define MPU_RSR_ALL_MEM 63
@@ -39,6 +42,7 @@
#endif
/* Access permission bits of ACR (only define those that we use)*/
+#define MPU_AP_PL1RO_PL0NA (0x5 << 8)
#define MPU_AP_PL1RW_PL0RW (0x3 << 8)
#define MPU_AP_PL1RW_PL0R0 (0x2 << 8)
#define MPU_AP_PL1RW_PL0NA (0x1 << 8)
@@ -47,7 +51,7 @@
#define MPU_PROBE_REGION 0
#define MPU_BG_REGION 1
#define MPU_RAM_REGION 2
-#define MPU_VECTORS_REGION 3
+#define MPU_ROM_REGION 3
/* Maximum number of regions Linux is interested in */
#define MPU_MAX_REGIONS 16
@@ -65,13 +69,23 @@ struct mpu_rgn {
};
struct mpu_rgn_info {
- u32 mpuir;
+ unsigned int used;
struct mpu_rgn rgns[MPU_MAX_REGIONS];
};
extern struct mpu_rgn_info mpu_rgn_info;
-#endif /* __ASSEMBLY__ */
+#ifdef CONFIG_ARM_MPU
+
+extern void __init adjust_lowmem_bounds_mpu(void);
+extern void __init mpu_setup(void);
-#endif /* CONFIG_ARM_MPU */
+#else
+
+static inline void adjust_lowmem_bounds_mpu(void) {}
+static inline void mpu_setup(void) {}
+
+#endif /* !CONFIG_ARM_MPU */
+
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index c3d5fc124a05..338cbe0a18ef 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -47,15 +47,24 @@ struct thread_struct {
#define INIT_THREAD { }
-#ifdef CONFIG_MMU
-#define nommu_start_thread(regs) do { } while (0)
-#else
-#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
-#endif
-
#define start_thread(regs,pc,sp) \
({ \
+ unsigned long r7, r8, r9; \
+ \
+ if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC)) { \
+ r7 = regs->ARM_r7; \
+ r8 = regs->ARM_r8; \
+ r9 = regs->ARM_r9; \
+ } \
memset(regs->uregs, 0, sizeof(regs->uregs)); \
+ if (IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) && \
+ current->personality & FDPIC_FUNCPTRS) { \
+ regs->ARM_r7 = r7; \
+ regs->ARM_r8 = r8; \
+ regs->ARM_r9 = r9; \
+ regs->ARM_r10 = current->mm->start_data; \
+ } else if (!IS_ENABLED(CONFIG_MMU)) \
+ regs->ARM_r10 = current->mm->start_data; \
if (current->personality & ADDR_LIMIT_32BIT) \
regs->ARM_cpsr = USR_MODE; \
else \
@@ -65,7 +74,6 @@ struct thread_struct {
regs->ARM_cpsr |= PSR_ENDSTATE; \
regs->ARM_pc = pc & ~1; /* pc */ \
regs->ARM_sp = sp; /* sp */ \
- nommu_start_thread(regs); \
})
/* Forward declaration, a strange C thing */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 3d6dc8b460e4..709a55989cb0 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -60,7 +60,7 @@ asmlinkage void secondary_start_kernel(void);
*/
struct secondary_data {
union {
- unsigned long mpu_rgn_szr;
+ struct mpu_rgn_info *mpu_rgn_info;
u64 pgdir;
};
unsigned long swapper_pg_dir;
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 3f0d95ab14b8..5c5e62cb304b 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -3,6 +3,7 @@
#define _ASMARM_UCONTEXT_H
#include <asm/fpstate.h>
+#include <asm/user.h>
/*
* struct sigcontext only has room for the basic registers, but struct
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index e6d9e29fcae4..634e77107425 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -58,6 +58,16 @@
#define V7M_SCB_CCSIDR 0x80 /* Cache size ID register */
#define V7M_SCB_CSSELR 0x84 /* Cache size selection register */
+/* Memory-mapped MPU registers for M-class */
+#define MPU_TYPE 0x90
+#define MPU_CTRL 0x94
+#define MPU_CTRL_ENABLE 1
+#define MPU_CTRL_PRIVDEFENA (1 << 2)
+
+#define MPU_RNR 0x98
+#define MPU_RBAR 0x9c
+#define MPU_RASR 0xa0
+
/* Cache opeartions */
#define V7M_SCB_ICIALLU 0x250 /* I-cache invalidate all to PoU */
#define V7M_SCB_ICIMVAU 0x258 /* I-cache invalidate by MVA to PoU */
diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h
index b67cda536c25..3287d790c83c 100644
--- a/arch/arm/include/uapi/asm/ptrace.h
+++ b/arch/arm/include/uapi/asm/ptrace.h
@@ -32,6 +32,10 @@
#define PTRACE_SETVFPREGS 28
#define PTRACE_GETHBPREGS 29
#define PTRACE_SETHBPREGS 30
+#define PTRACE_GETFDPIC 31
+
+#define PTRACE_GETFDPIC_EXEC 0
+#define PTRACE_GETFDPIC_INTERP 1
/*
* PSR bits
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index 39b2ad997e91..93ecf8aa4fe5 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -36,5 +36,6 @@
#define __ARM_NR_usr26 (__ARM_NR_BASE+3)
#define __ARM_NR_usr32 (__ARM_NR_BASE+4)
#define __ARM_NR_set_tls (__ARM_NR_BASE+5)
+#define __ARM_NR_get_tls (__ARM_NR_BASE+6)
#endif /* _UAPI__ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 499f978fb1fd..b59ac4bf82b8 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -88,6 +88,11 @@ head-y := head$(MMUEXT).o
obj-$(CONFIG_DEBUG_LL) += debug.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+# This is executed very early using a temporary stack when no memory allocator
+# nor global data is available. Everything has to be allocated on the stack.
+CFLAGS_head-inflate-data.o := $(call cc-option,-Wframe-larger-than=10240)
+obj-$(CONFIG_XIP_DEFLATED_DATA) += head-inflate-data.o
+
obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o
AFLAGS_hyp-stub.o :=-Wa,-march=armv7-a
ifeq ($(CONFIG_ARM_PSCI),y)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 608008229c7d..f369ece99958 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -23,11 +23,13 @@
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
+#include <asm/mpu.h>
#include <asm/procinfo.h>
#include <asm/suspend.h>
#include <asm/vdso_datapage.h>
#include <asm/hardware/cache-l2x0.h>
#include <linux/kbuild.h>
+#include "signal.h"
/*
* Make sure that the compiler and target are compatible.
@@ -112,6 +114,9 @@ int main(void)
DEFINE(SVC_ADDR_LIMIT, offsetof(struct svc_pt_regs, addr_limit));
DEFINE(SVC_REGS_SIZE, sizeof(struct svc_pt_regs));
BLANK();
+ DEFINE(SIGFRAME_RC3_OFFSET, offsetof(struct sigframe, retcode[3]));
+ DEFINE(RT_SIGFRAME_RC3_OFFSET, offsetof(struct rt_sigframe, sig.retcode[3]));
+ BLANK();
#ifdef CONFIG_CACHE_L2X0
DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base));
DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl));
@@ -183,5 +188,15 @@ int main(void)
#ifdef CONFIG_VDSO
DEFINE(VDSO_DATA_SIZE, sizeof(union vdso_data_store));
#endif
+ BLANK();
+#ifdef CONFIG_ARM_MPU
+ DEFINE(MPU_RNG_INFO_RNGS, offsetof(struct mpu_rgn_info, rgns));
+ DEFINE(MPU_RNG_INFO_USED, offsetof(struct mpu_rgn_info, used));
+
+ DEFINE(MPU_RNG_SIZE, sizeof(struct mpu_rgn));
+ DEFINE(MPU_RGN_DRBAR, offsetof(struct mpu_rgn, drbar));
+ DEFINE(MPU_RGN_DRSR, offsetof(struct mpu_rgn, drsr));
+ DEFINE(MPU_RGN_DRACR, offsetof(struct mpu_rgn, dracr));
+#endif
return 0;
}
diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c
index 98fbfd235ac8..c10a3e8ee998 100644
--- a/arch/arm/kernel/atags_parse.c
+++ b/arch/arm/kernel/atags_parse.c
@@ -196,11 +196,8 @@ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
break;
}
- if (!mdesc) {
- early_print("\nError: unrecognized/unsupported machine ID"
- " (r1 = 0x%08x).\n\n", machine_nr);
- dump_machine_table(); /* does not return */
- }
+ if (!mdesc)
+ return NULL;
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 0a498cb3fad8..b795dc2408c0 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -55,7 +55,9 @@ ENDPROC(printhex4)
ENTRY(printhex2)
mov r1, #2
-printhex: adr r2, hexbuf
+printhex: adr r2, hexbuf_rel
+ ldr r3, [r2]
+ add r2, r2, r3
add r3, r2, r1
mov r1, #0
strb r1, [r3]
@@ -71,7 +73,11 @@ printhex: adr r2, hexbuf
b printascii
ENDPROC(printhex2)
-hexbuf: .space 16
+ .pushsection .bss
+hexbuf_addr: .space 16
+ .popsection
+ .align
+hexbuf_rel: .long hexbuf_addr - .
.ltorg
@@ -79,25 +85,28 @@ hexbuf: .space 16
ENTRY(printascii)
addruart_current r3, r1, r2
- b 2f
-1: waituart r2, r3
- senduart r1, r3
- busyuart r2, r3
- teq r1, #'\n'
- moveq r1, #'\r'
- beq 1b
-2: teq r0, #0
+1: teq r0, #0
ldrneb r1, [r0], #1
teqne r1, #0
- bne 1b
- ret lr
+ reteq lr
+2: teq r1, #'\n'
+ bne 3f
+ mov r1, #'\r'
+ waituart r2, r3
+ senduart r1, r3
+ busyuart r2, r3
+ mov r1, #'\n'
+3: waituart r2, r3
+ senduart r1, r3
+ busyuart r2, r3
+ b 1b
ENDPROC(printascii)
ENTRY(printch)
addruart_current r3, r1, r2
mov r1, r0
mov r0, #0
- b 1b
+ b 2b
ENDPROC(printch)
#ifdef CONFIG_MMU
@@ -124,7 +133,9 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
- adr r1, hexbuf
+ adr r1, hexbuf_rel
+ ldr r2, [r1]
+ add r1, r1, r2
strb r0, [r1]
mov r0, #0x03 @ SYS_WRITEC
ARM( svc #0x123456 )
diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c
index 43076536965c..9257736ec9fa 100644
--- a/arch/arm/kernel/early_printk.c
+++ b/arch/arm/kernel/early_printk.c
@@ -11,16 +11,20 @@
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/init.h>
+#include <linux/string.h>
-extern void printch(int);
+extern void printascii(const char *);
static void early_write(const char *s, unsigned n)
{
- while (n-- > 0) {
- if (*s == '\n')
- printch('\r');
- printch(*s);
- s++;
+ char buf[128];
+ while (n) {
+ unsigned l = min(n, sizeof(buf)-1);
+ memcpy(buf, s, l);
+ buf[l] = 0;
+ s += l;
+ n -= l;
+ printascii(buf);
}
}
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 846dda2f3c48..182422981386 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -4,6 +4,7 @@
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/elf.h>
+#include <linux/elf-fdpic.h>
#include <asm/system_info.h>
int elf_check_arch(const struct elf32_hdr *x)
@@ -81,7 +82,7 @@ EXPORT_SYMBOL(elf_set_personality);
* - the binary requires an executable stack
* - we're running on a CPU which doesn't support NX.
*/
-int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
+int arm_elf_read_implies_exec(int executable_stack)
{
if (executable_stack != EXSTACK_DISABLE_X)
return 1;
@@ -90,3 +91,24 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
return 0;
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
+
+#if defined(CONFIG_MMU) && defined(CONFIG_BINFMT_ELF_FDPIC)
+
+void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params,
+ struct elf_fdpic_params *interp_params,
+ unsigned long *start_stack,
+ unsigned long *start_brk)
+{
+ elf_set_personality(&exec_params->hdr);
+
+ exec_params->load_addr = 0x8000;
+ interp_params->load_addr = ELF_ET_DYN_BASE;
+ *start_stack = TASK_SIZE - SZ_16M;
+
+ if ((exec_params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == ELF_FDPIC_FLAG_INDEPENDENT) {
+ exec_params->flags &= ~ELF_FDPIC_FLAG_ARRANGEMENT;
+ exec_params->flags |= ELF_FDPIC_FLAG_CONSTDISP;
+ }
+}
+
+#endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 99c908226065..e655dcd0a933 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -400,17 +400,8 @@ ENDPROC(sys_fstatfs64_wrapper)
* offset, we return EINVAL.
*/
sys_mmap2:
-#if PAGE_SHIFT > 12
- tst r5, #PGOFF_MASK
- moveq r5, r5, lsr #PAGE_SHIFT - 12
- streq r5, [sp, #4]
- beq sys_mmap_pgoff
- mov r0, #-EINVAL
- ret lr
-#else
str r5, [sp, #4]
b sys_mmap_pgoff
-#endif
ENDPROC(sys_mmap2)
#ifdef CONFIG_OABI_COMPAT
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 8733012d231f..21dde771a7dd 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -79,47 +79,69 @@ ENDPROC(__vet_atags)
*/
__INIT
__mmap_switched:
- adr r3, __mmap_switched_data
-
- ldmia r3!, {r4, r5, r6, r7}
- cmp r4, r5 @ Copy data segment if needed
-1: cmpne r5, r6
- ldrne fp, [r4], #4
- strne fp, [r5], #4
- bne 1b
-
- mov fp, #0 @ Clear BSS (and zero fp)
-1: cmp r6, r7
- strcc fp, [r6],#4
- bcc 1b
-
- ARM( ldmia r3, {r4, r5, r6, r7, sp})
- THUMB( ldmia r3, {r4, r5, r6, r7} )
- THUMB( ldr sp, [r3, #16] )
- str r9, [r4] @ Save processor ID
- str r1, [r5] @ Save machine type
- str r2, [r6] @ Save atags pointer
- cmp r7, #0
- strne r0, [r7] @ Save control register values
+
+ mov r7, r1
+ mov r8, r2
+ mov r10, r0
+
+ adr r4, __mmap_switched_data
+ mov fp, #0
+
+#if defined(CONFIG_XIP_DEFLATED_DATA)
+ ARM( ldr sp, [r4], #4 )
+ THUMB( ldr sp, [r4] )
+ THUMB( add r4, #4 )
+ bl __inflate_kernel_data @ decompress .data to RAM
+ teq r0, #0
+ bne __error
+#elif defined(CONFIG_XIP_KERNEL)
+ ARM( ldmia r4!, {r0, r1, r2, sp} )
+ THUMB( ldmia r4!, {r0, r1, r2, r3} )
+ THUMB( mov sp, r3 )
+ sub r2, r2, r1
+ bl memcpy @ copy .data to RAM
+#endif
+
+ ARM( ldmia r4!, {r0, r1, sp} )
+ THUMB( ldmia r4!, {r0, r1, r3} )
+ THUMB( mov sp, r3 )
+ sub r1, r1, r0
+ bl __memzero @ clear .bss
+
+ ldmia r4, {r0, r1, r2, r3}
+ str r9, [r0] @ Save processor ID
+ str r7, [r1] @ Save machine type
+ str r8, [r2] @ Save atags pointer
+ cmp r3, #0
+ strne r10, [r3] @ Save control register values
+ mov lr, #0
b start_kernel
ENDPROC(__mmap_switched)
.align 2
.type __mmap_switched_data, %object
__mmap_switched_data:
- .long __data_loc @ r4
- .long _sdata @ r5
- .long __bss_start @ r6
- .long _end @ r7
- .long processor_id @ r4
- .long __machine_arch_type @ r5
- .long __atags_pointer @ r6
+#ifdef CONFIG_XIP_KERNEL
+#ifndef CONFIG_XIP_DEFLATED_DATA
+ .long _sdata @ r0
+ .long __data_loc @ r1
+ .long _edata_loc @ r2
+#endif
+ .long __bss_stop @ sp (temporary stack in .bss)
+#endif
+
+ .long __bss_start @ r0
+ .long __bss_stop @ r1
+ .long init_thread_union + THREAD_START_SP @ sp
+
+ .long processor_id @ r0
+ .long __machine_arch_type @ r1
+ .long __atags_pointer @ r2
#ifdef CONFIG_CPU_CP15
- .long cr_alignment @ r7
+ .long cr_alignment @ r3
#else
- .long 0 @ r7
+ .long 0 @ r3
#endif
- .long init_thread_union + THREAD_START_SP @ sp
.size __mmap_switched_data, . - __mmap_switched_data
/*
diff --git a/arch/arm/kernel/head-inflate-data.c b/arch/arm/kernel/head-inflate-data.c
new file mode 100644
index 000000000000..6dd0ce5e6058
--- /dev/null
+++ b/arch/arm/kernel/head-inflate-data.c
@@ -0,0 +1,62 @@
+/*
+ * XIP kernel .data segment decompressor
+ *
+ * Created by: Nicolas Pitre, August 2017
+ * Copyright: (C) 2017 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/zutil.h>
+
+/* for struct inflate_state */
+#include "../../../lib/zlib_inflate/inftrees.h"
+#include "../../../lib/zlib_inflate/inflate.h"
+#include "../../../lib/zlib_inflate/infutil.h"
+
+extern char __data_loc[];
+extern char _edata_loc[];
+extern char _sdata[];
+
+/*
+ * This code is called very early during the boot process to decompress
+ * the .data segment stored compressed in ROM. Therefore none of the global
+ * variables are valid yet, hence no kernel services such as memory
+ * allocation is available. Everything must be allocated on the stack and
+ * we must avoid any global data access. We use a temporary stack located
+ * in the .bss area. The linker script makes sure the .bss is big enough
+ * to hold our stack frame plus some room for called functions.
+ *
+ * We mimic the code in lib/decompress_inflate.c to use the smallest work
+ * area possible. And because everything is statically allocated on the
+ * stack then there is no need to clean up before returning.
+ */
+
+int __init __inflate_kernel_data(void)
+{
+ struct z_stream_s stream, *strm = &stream;
+ struct inflate_state state;
+ char *in = __data_loc;
+ int rc;
+
+ /* Check and skip gzip header (assume no filename) */
+ if (in[0] != 0x1f || in[1] != 0x8b || in[2] != 0x08 || in[3] & ~3)
+ return -1;
+ in += 10;
+
+ strm->workspace = &state;
+ strm->next_in = in;
+ strm->avail_in = _edata_loc - __data_loc; /* upper bound */
+ strm->next_out = _sdata;
+ strm->avail_out = _edata_loc - __data_loc;
+ zlib_inflateInit2(strm, -MAX_WBITS);
+ WS(strm)->inflate_state.wsize = 0;
+ WS(strm)->inflate_state.window = NULL;
+ rc = zlib_inflate(strm, Z_FINISH);
+ if (rc == Z_OK || rc == Z_STREAM_END)
+ rc = strm->avail_out; /* should be 0 */
+ return rc;
+}
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 2e21e08de747..2e38f85b757a 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -13,6 +13,7 @@
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <linux/errno.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
@@ -110,8 +111,8 @@ ENTRY(secondary_startup)
#ifdef CONFIG_ARM_MPU
/* Use MPU region info supplied by __cpu_up */
- ldr r6, [r7] @ get secondary_data.mpu_szr
- bl __setup_mpu @ Initialize the MPU
+ ldr r6, [r7] @ get secondary_data.mpu_rgn_info
+ bl __secondary_setup_mpu @ Initialize the MPU
#endif
badr lr, 1f @ return (PIC) address
@@ -175,19 +176,33 @@ ENDPROC(__after_proc_init)
#ifdef CONFIG_ARM_MPU
+#ifndef CONFIG_CPU_V7M
/* Set which MPU region should be programmed */
-.macro set_region_nr tmp, rgnr
+.macro set_region_nr tmp, rgnr, unused
mov \tmp, \rgnr @ Use static region numbers
mcr p15, 0, \tmp, c6, c2, 0 @ Write RGNR
.endm
/* Setup a single MPU region, either D or I side (D-side for unified) */
-.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE
+.macro setup_region bar, acr, sr, side = MPU_DATA_SIDE, unused
mcr p15, 0, \bar, c6, c1, (0 + \side) @ I/DRBAR
mcr p15, 0, \acr, c6, c1, (4 + \side) @ I/DRACR
mcr p15, 0, \sr, c6, c1, (2 + \side) @ I/DRSR
.endm
+#else
+.macro set_region_nr tmp, rgnr, base
+ mov \tmp, \rgnr
+ str \tmp, [\base, #MPU_RNR]
+.endm
+
+.macro setup_region bar, acr, sr, unused, base
+ lsl \acr, \acr, #16
+ orr \acr, \acr, \sr
+ str \bar, [\base, #MPU_RBAR]
+ str \acr, [\base, #MPU_RASR]
+.endm
+#endif
/*
* Setup the MPU and initial MPU Regions. We create the following regions:
* Region 0: Use this for probing the MPU details, so leave disabled.
@@ -201,64 +216,137 @@ ENDPROC(__after_proc_init)
ENTRY(__setup_mpu)
/* Probe for v7 PMSA compliance */
- mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
+M_CLASS(movw r12, #:lower16:BASEADDR_V7M_SCB)
+M_CLASS(movt r12, #:upper16:BASEADDR_V7M_SCB)
+
+AR_CLASS(mrc p15, 0, r0, c0, c1, 4) @ Read ID_MMFR0
+M_CLASS(ldr r0, [r12, 0x50])
and r0, r0, #(MMFR0_PMSA) @ PMSA field
teq r0, #(MMFR0_PMSAv7) @ PMSA v7
- bne __error_p @ Fail: ARM_MPU on NOT v7 PMSA
+ bxne lr
/* Determine whether the D/I-side memory map is unified. We set the
* flags here and continue to use them for the rest of this function */
- mrc p15, 0, r0, c0, c0, 4 @ MPUIR
+AR_CLASS(mrc p15, 0, r0, c0, c0, 4) @ MPUIR
+M_CLASS(ldr r0, [r12, #MPU_TYPE])
ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
- beq __error_p @ Fail: ARM_MPU and no MPU
+ bxeq lr
tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
/* Setup second region first to free up r6 */
- set_region_nr r0, #MPU_RAM_REGION
+ set_region_nr r0, #MPU_RAM_REGION, r12
isb
/* Full access from PL0, PL1, shared for CONFIG_SMP, cacheable */
ldr r0, =PLAT_PHYS_OFFSET @ RAM starts at PHYS_OFFSET
ldr r5,=(MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL)
- setup_region r0, r5, r6, MPU_DATA_SIDE @ PHYS_OFFSET, shared, enabled
- beq 1f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ PHYS_OFFSET, shared, enabled
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ PHYS_OFFSET, shared, enabled
+ beq 1f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ PHYS_OFFSET, shared, enabled
1: isb
/* First/background region */
- set_region_nr r0, #MPU_BG_REGION
+ set_region_nr r0, #MPU_BG_REGION, r12
isb
/* Execute Never, strongly ordered, inaccessible to PL0, rw PL1 */
mov r0, #0 @ BG region starts at 0x0
ldr r5,=(MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA)
mov r6, #MPU_RSR_ALL_MEM @ 4GB region, enabled
- setup_region r0, r5, r6, MPU_DATA_SIDE @ 0x0, BG region, enabled
- beq 2f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ 0x0, BG region, enabled
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ 0x0, BG region, enabled
+ beq 2f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE r12 @ 0x0, BG region, enabled
2: isb
- /* Vectors region */
- set_region_nr r0, #MPU_VECTORS_REGION
+#ifdef CONFIG_XIP_KERNEL
+ set_region_nr r0, #MPU_ROM_REGION, r12
isb
- /* Shared, inaccessible to PL0, rw PL1 */
- mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
- ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
- /* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
- mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
-
- setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
- beq 3f @ Memory-map not unified
- setup_region r0, r5, r6, MPU_INSTR_SIDE @ VECTORS_BASE, PL0 NA, enabled
+
+ ldr r5,=(MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL)
+
+ ldr r0, =CONFIG_XIP_PHYS_ADDR @ ROM start
+ ldr r6, =(_exiprom) @ ROM end
+ sub r6, r6, r0 @ Minimum size of region to map
+ clz r6, r6 @ Region size must be 2^N...
+ rsb r6, r6, #31 @ ...so round up region size
+ lsl r6, r6, #MPU_RSR_SZ @ Put size in right field
+ orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit
+
+ setup_region r0, r5, r6, MPU_DATA_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
+ beq 3f @ Memory-map not unified
+ setup_region r0, r5, r6, MPU_INSTR_SIDE, r12 @ XIP_PHYS_ADDR, shared, enabled
3: isb
+#endif
+
+ /* Enable the MPU */
+AR_CLASS(mrc p15, 0, r0, c1, c0, 0) @ Read SCTLR
+AR_CLASS(bic r0, r0, #CR_BR) @ Disable the 'default mem-map'
+AR_CLASS(orr r0, r0, #CR_M) @ Set SCTRL.M (MPU on)
+AR_CLASS(mcr p15, 0, r0, c1, c0, 0) @ Enable MPU
+
+M_CLASS(ldr r0, [r12, #MPU_CTRL])
+M_CLASS(bic r0, #MPU_CTRL_PRIVDEFENA)
+M_CLASS(orr r0, #MPU_CTRL_ENABLE)
+M_CLASS(str r0, [r12, #MPU_CTRL])
+ isb
+
+ ret lr
+ENDPROC(__setup_mpu)
+
+#ifdef CONFIG_SMP
+/*
+ * r6: pointer at mpu_rgn_info
+ */
+
+ENTRY(__secondary_setup_mpu)
+ /* Probe for v7 PMSA compliance */
+ mrc p15, 0, r0, c0, c1, 4 @ Read ID_MMFR0
+ and r0, r0, #(MMFR0_PMSA) @ PMSA field
+ teq r0, #(MMFR0_PMSAv7) @ PMSA v7
+ bne __error_p
+
+ /* Determine whether the D/I-side memory map is unified. We set the
+ * flags here and continue to use them for the rest of this function */
+ mrc p15, 0, r0, c0, c0, 4 @ MPUIR
+ ands r5, r0, #MPUIR_DREGION_SZMASK @ 0 size d region => No MPU
+ beq __error_p
+
+ ldr r4, [r6, #MPU_RNG_INFO_USED]
+ mov r5, #MPU_RNG_SIZE
+ add r3, r6, #MPU_RNG_INFO_RNGS
+ mla r3, r4, r5, r3
+
+1:
+ tst r0, #MPUIR_nU @ MPUIR_nU = 0 for unified
+ sub r3, r3, #MPU_RNG_SIZE
+ sub r4, r4, #1
+
+ set_region_nr r0, r4
+ isb
+
+ ldr r0, [r3, #MPU_RGN_DRBAR]
+ ldr r6, [r3, #MPU_RGN_DRSR]
+ ldr r5, [r3, #MPU_RGN_DRACR]
+
+ setup_region r0, r5, r6, MPU_DATA_SIDE
+ beq 2f
+ setup_region r0, r5, r6, MPU_INSTR_SIDE
+2: isb
+
+ mrc p15, 0, r0, c0, c0, 4 @ Reevaluate the MPUIR
+ cmp r4, #0
+ bgt 1b
/* Enable the MPU */
mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
- bic r0, r0, #CR_BR @ Disable the 'default mem-map'
+ bic r0, r0, #CR_BR @ Disable the 'default mem-map'
orr r0, r0, #CR_M @ Set SCTRL.M (MPU on)
mcr p15, 0, r0, c1, c0, 0 @ Enable MPU
isb
+
ret lr
-ENDPROC(__setup_mpu)
-#endif
+ENDPROC(__secondary_setup_mpu)
+
+#endif /* CONFIG_SMP */
+#endif /* CONFIG_ARM_MPU */
#include "head-common.S"
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8e9a3e40d949..fc40a2b40595 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1069,6 +1069,16 @@ void __init setup_arch(char **cmdline_p)
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
mdesc = setup_machine_tags(__atags_pointer, __machine_arch_type);
+ if (!mdesc) {
+ early_print("\nError: invalid dtb and unrecognized/unsupported machine ID\n");
+ early_print(" r1=0x%08x, r2=0x%08x\n", __machine_arch_type,
+ __atags_pointer);
+ if (__atags_pointer)
+ early_print(" r2[]=%*ph\n", 16,
+ phys_to_virt(__atags_pointer));
+ dump_machine_table();
+ }
+
machine_desc = mdesc;
machine_name = mdesc->name;
dump_stack_set_arch_desc("%s", mdesc->name);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index b67ae12503f3..bd8810d4acb3 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -19,11 +19,12 @@
#include <asm/elf.h>
#include <asm/cacheflush.h>
#include <asm/traps.h>
-#include <asm/ucontext.h>
#include <asm/unistd.h>
#include <asm/vfp.h>
-extern const unsigned long sigreturn_codes[7];
+#include "signal.h"
+
+extern const unsigned long sigreturn_codes[17];
static unsigned long signal_return_offset;
@@ -172,15 +173,6 @@ static int restore_vfp_context(char __user **auxp)
/*
* Do a signal return; undo the signal stack. These are aligned to 64-bit.
*/
-struct sigframe {
- struct ucontext uc;
- unsigned long retcode[2];
-};
-
-struct rt_sigframe {
- struct siginfo info;
- struct sigframe sig;
-};
static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
{
@@ -366,9 +358,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
unsigned long __user *rc, void __user *frame)
{
unsigned long handler = (unsigned long)ksig->ka.sa.sa_handler;
+ unsigned long handler_fdpic_GOT = 0;
unsigned long retcode;
- int thumb = 0;
+ unsigned int idx, thumb = 0;
unsigned long cpsr = regs->ARM_cpsr & ~(PSR_f | PSR_E_BIT);
+ bool fdpic = IS_ENABLED(CONFIG_BINFMT_ELF_FDPIC) &&
+ (current->personality & FDPIC_FUNCPTRS);
+
+ if (fdpic) {
+ unsigned long __user *fdpic_func_desc =
+ (unsigned long __user *)handler;
+ if (__get_user(handler, &fdpic_func_desc[0]) ||
+ __get_user(handler_fdpic_GOT, &fdpic_func_desc[1]))
+ return 1;
+ }
cpsr |= PSR_ENDSTATE;
@@ -408,9 +411,26 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
if (ksig->ka.sa.sa_flags & SA_RESTORER) {
retcode = (unsigned long)ksig->ka.sa.sa_restorer;
+ if (fdpic) {
+ /*
+ * We need code to load the function descriptor.
+ * That code follows the standard sigreturn code
+ * (6 words), and is made of 3 + 2 words for each
+ * variant. The 4th copied word is the actual FD
+ * address that the assembly code expects.
+ */
+ idx = 6 + thumb * 3;
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ idx += 5;
+ if (__put_user(sigreturn_codes[idx], rc ) ||
+ __put_user(sigreturn_codes[idx+1], rc+1) ||
+ __put_user(sigreturn_codes[idx+2], rc+2) ||
+ __put_user(retcode, rc+3))
+ return 1;
+ goto rc_finish;
+ }
} else {
- unsigned int idx = thumb << 1;
-
+ idx = thumb << 1;
if (ksig->ka.sa.sa_flags & SA_SIGINFO)
idx += 3;
@@ -422,6 +442,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
__put_user(sigreturn_codes[idx+1], rc+1))
return 1;
+rc_finish:
#ifdef CONFIG_MMU
if (cpsr & MODE32_BIT) {
struct mm_struct *mm = current->mm;
@@ -441,7 +462,7 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
* the return code written onto the stack.
*/
flush_icache_range((unsigned long)rc,
- (unsigned long)(rc + 2));
+ (unsigned long)(rc + 3));
retcode = ((unsigned long)rc) + thumb;
}
@@ -451,6 +472,8 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
regs->ARM_sp = (unsigned long)frame;
regs->ARM_lr = retcode;
regs->ARM_pc = handler;
+ if (fdpic)
+ regs->ARM_r9 = handler_fdpic_GOT;
regs->ARM_cpsr = cpsr;
return 0;
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
new file mode 100644
index 000000000000..b7b838b05229
--- /dev/null
+++ b/arch/arm/kernel/signal.h
@@ -0,0 +1,11 @@
+#include <asm/ucontext.h>
+
+struct sigframe {
+ struct ucontext uc;
+ unsigned long retcode[4];
+};
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct sigframe sig;
+};
diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
index b84d0cb13682..2c7b22e32152 100644
--- a/arch/arm/kernel/sigreturn_codes.S
+++ b/arch/arm/kernel/sigreturn_codes.S
@@ -14,6 +14,8 @@
* GNU General Public License for more details.
*/
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
#include <asm/unistd.h>
/*
@@ -51,6 +53,17 @@ ARM_OK( .arm )
.thumb
.endm
+ .macro arm_fdpic_slot n
+ .org sigreturn_codes + 24 + 20 * (\n)
+ARM_OK( .arm )
+ .endm
+
+ .macro thumb_fdpic_slot n
+ .org sigreturn_codes + 24 + 20 * (\n) + 12
+ .thumb
+ .endm
+
+
#if __LINUX_ARM_ARCH__ <= 4
/*
* Note we manually set minimally required arch that supports
@@ -90,13 +103,46 @@ ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) )
movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
swi #0
+ /* ARM sigreturn restorer FDPIC bounce code snippet */
+ arm_fdpic_slot 0
+ARM_OK( ldr r3, [sp, #SIGFRAME_RC3_OFFSET] )
+ARM_OK( ldmia r3, {r3, r9} )
+#ifdef CONFIG_ARM_THUMB
+ARM_OK( bx r3 )
+#else
+ARM_OK( ret r3 )
+#endif
+
+ /* Thumb sigreturn restorer FDPIC bounce code snippet */
+ thumb_fdpic_slot 0
+ ldr r3, [sp, #SIGFRAME_RC3_OFFSET]
+ ldmia r3, {r2, r3}
+ mov r9, r3
+ bx r2
+
+ /* ARM sigreturn_rt restorer FDPIC bounce code snippet */
+ arm_fdpic_slot 1
+ARM_OK( ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET] )
+ARM_OK( ldmia r3, {r3, r9} )
+#ifdef CONFIG_ARM_THUMB
+ARM_OK( bx r3 )
+#else
+ARM_OK( ret r3 )
+#endif
+
+ /* Thumb sigreturn_rt restorer FDPIC bounce code snippet */
+ thumb_fdpic_slot 1
+ ldr r3, [sp, #RT_SIGFRAME_RC3_OFFSET]
+ ldmia r3, {r2, r3}
+ mov r9, r3
+ bx r2
+
/*
- * Note on addtional space: setup_return in signal.c
- * algorithm uses two words copy regardless whether
- * it is thumb case or not, so we need additional
- * word after real last entry.
+ * Note on additional space: setup_return in signal.c
+ * always copies the same number of words regardless whether
+ * it is thumb case or not, so we need one additional padding
+ * word after the last entry.
*/
- arm_slot 2
.space 4
.size sigreturn_codes, . - sigreturn_codes
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index c9a0a5299827..b4fbf00ee4ad 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -114,7 +114,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
*/
secondary_data.stack = task_stack_page(idle) + THREAD_START_SP;
#ifdef CONFIG_ARM_MPU
- secondary_data.mpu_rgn_szr = mpu_rgn_info.rgns[MPU_RAM_REGION].drsr;
+ secondary_data.mpu_rgn_info = &mpu_rgn_info;
#endif
#ifdef CONFIG_MMU
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 0fcd82f01388..5cf04888c581 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -655,6 +655,9 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
set_tls(regs->ARM_r0);
return 0;
+ case NR(get_tls):
+ return current_thread_info()->tp_value[0];
+
default:
/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
if not implemented, rather than raising SIGILL. This
diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 0951df916b85..ec4b3f94ad80 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -7,6 +7,8 @@
/* No __ro_after_init data in the .rodata section - which will always be ro */
#define RO_AFTER_INIT_DATA
+#include <linux/sizes.h>
+
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
@@ -78,9 +80,7 @@ SECTIONS
*(.text.fixup)
*(__ex_table)
#endif
-#ifndef CONFIG_SMP_ON_UP
*(.alt.smp.init)
-#endif
*(.discard)
*(.discard.*)
}
@@ -182,19 +182,7 @@ SECTIONS
*(.taglist.init)
__tagtable_end = .;
}
-#ifdef CONFIG_SMP_ON_UP
- .init.smpalt : {
- __smpalt_begin = .;
- *(.alt.smp.init)
- __smpalt_end = .;
- }
-#endif
- .init.pv_table : {
- __pv_table_begin = .;
- *(.pv_table)
- __pv_table_end = .;
- }
- .init.data : {
+ .init.rodata : {
INIT_SETUP(16)
INIT_CALLS
CON_INITCALL
@@ -202,48 +190,49 @@ SECTIONS
INIT_RAM_FS
}
-#ifdef CONFIG_SMP
- PERCPU_SECTION(L1_CACHE_BYTES)
+#ifdef CONFIG_ARM_MPU
+ . = ALIGN(SZ_128K);
#endif
-
_exiprom = .; /* End of XIP ROM area */
- __data_loc = ALIGN(4); /* location in binary */
- . = PAGE_OFFSET + TEXT_OFFSET;
- .data : AT(__data_loc) {
- _data = .; /* address in memory */
- _sdata = .;
-
- /*
- * first, the init task union, aligned
- * to an 8192 byte boundary.
- */
- INIT_TASK_DATA(THREAD_SIZE)
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+ __data_loc = ALIGN(4); /* location in file */
+ . = PAGE_OFFSET + TEXT_OFFSET; /* location in memory */
+#undef LOAD_OFFSET
+#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
+
+ . = ALIGN(THREAD_SIZE);
+ _sdata = .;
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+ *(.data..ro_after_init)
+ }
+ _edata = .;
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
+ }
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
ARM_EXIT_KEEP(EXIT_DATA)
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-
- *(.data..ro_after_init)
-
- NOSAVE_DATA
- CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
- READ_MOSTLY_DATA(L1_CACHE_BYTES)
-
- /*
- * and the usual data section
- */
- DATA_DATA
- CONSTRUCTORS
-
- _edata = .;
}
- _edata_loc = __data_loc + SIZEOF(.data);
+#ifdef CONFIG_SMP
+ PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+ /*
+ * End of copied data. We need a dummy section to get its LMA.
+ * Also located before final ALIGN() as trailing padding is not stored
+ * in the resulting binary file and useless to copy.
+ */
+ .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+ _edata_loc = LOADADDR(.data.endmark);
- BUG_TABLE
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
#ifdef CONFIG_HAVE_TCM
/*
@@ -302,7 +291,7 @@ SECTIONS
}
#endif
- BSS_SECTION(0, 0, 0)
+ BSS_SECTION(0, 0, 8)
_end = .;
STABS_DEBUG
@@ -323,3 +312,29 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
*/
ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
"HYP init code too big or misaligned")
+
+#ifdef CONFIG_XIP_DEFLATED_DATA
+/*
+ * The .bss is used as a stack area for __inflate_kernel_data() whose stack
+ * frame is 9568 bytes. Make sure it has extra room left.
+ */
+ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
+#endif
+
+#ifdef CONFIG_ARM_MPU
+/*
+ * Due to PMSAv7 restriction on base address and size we have to
+ * enforce minimal alignment restrictions. It was seen that weaker
+ * alignment restriction on _xiprom will likely force XIP address
+ * space spawns multiple MPU regions thus it is likely we run in
+ * situation when we are reprogramming MPU region we run on with
+ * something which doesn't cover reprogramming code itself, so as soon
+ * as we update MPU settings we'd immediately try to execute straight
+ * from background region which is XN.
+ * It seem that alignment in 1M should suit most users.
+ * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
+ * disable
+ */
+ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
+ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
+#endif
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 1845a5affb44..ee53f6518872 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -215,14 +215,9 @@ SECTIONS
*(.pv_table)
__pv_table_end = .;
}
- .init.data : {
- INIT_DATA
- INIT_SETUP(16)
- INIT_CALLS
- CON_INITCALL
- SECURITY_INITCALL
- INIT_RAM_FS
- }
+
+ INIT_DATA_SECTION(16)
+
.exit.data : {
ARM_EXIT_KEEP(EXIT_DATA)
}
@@ -237,33 +232,10 @@ SECTIONS
. = ALIGN(THREAD_SIZE);
#endif
__init_end = .;
- __data_loc = .;
-
- .data : AT(__data_loc) {
- _data = .; /* address in memory */
- _sdata = .;
-
- /*
- * first, the init task union, aligned
- * to an 8192 byte boundary.
- */
- INIT_TASK_DATA(THREAD_SIZE)
-
- NOSAVE_DATA
- CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
- READ_MOSTLY_DATA(L1_CACHE_BYTES)
-
- /*
- * and the usual data section
- */
- DATA_DATA
- CONSTRUCTORS
-
- _edata = .;
- }
- _edata_loc = __data_loc + SIZEOF(.data);
- BUG_TABLE
+ _sdata = .;
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
#ifdef CONFIG_HAVE_TCM
/*
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index f353ee569f6b..01bcc33f59e3 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_MMU) += fault-armv.o flush.o idmap.o ioremap.o \
ifneq ($(CONFIG_MMU),y)
obj-y += nommu.o
+obj-$(CONFIG_ARM_MPU) += pmsa-v7.o
endif
obj-$(CONFIG_ARM_PTDUMP) += dump.o
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index fcf1473d6fed..ada8eb206a90 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -382,9 +382,9 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
}
#define DEFAULT_DMA_COHERENT_POOL_SIZE SZ_256K
-static struct gen_pool *atomic_pool;
+static struct gen_pool *atomic_pool __ro_after_init;
-static size_t atomic_pool_size = DEFAULT_DMA_COHERENT_POOL_SIZE;
+static size_t atomic_pool_size __initdata = DEFAULT_DMA_COHERENT_POOL_SIZE;
static int __init early_coherent_pool(char *p)
{
@@ -393,21 +393,6 @@ static int __init early_coherent_pool(char *p)
}
early_param("coherent_pool", early_coherent_pool);
-void __init init_dma_coherent_pool_size(unsigned long size)
-{
- /*
- * Catch any attempt to set the pool size too late.
- */
- BUG_ON(atomic_pool);
-
- /*
- * Set architecture specific coherent pool size only if
- * it has not been changed by kernel command line parameter.
- */
- if (atomic_pool_size == DEFAULT_DMA_COHERENT_POOL_SIZE)
- atomic_pool_size = size;
-}
-
/*
* Initialise the coherent pool for atomic allocations.
*/
@@ -443,7 +428,7 @@ static int __init atomic_pool_init(void)
gen_pool_set_algo(atomic_pool,
gen_pool_first_fit_order_align,
- (void *)PAGE_SHIFT);
+ NULL);
pr_info("DMA: preallocated %zu KiB pool for atomic coherent allocations\n",
atomic_pool_size / 1024);
return 0;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ad80548325fe..81d4482b6861 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -580,16 +580,6 @@ void __init mem_init(void)
BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > PAGE_OFFSET);
#endif
-
- if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
- extern int sysctl_overcommit_memory;
- /*
- * On a machine this small we won't get
- * anywhere without overcommit, so turn
- * it on by default.
- */
- sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
- }
}
#ifdef CONFIG_STRICT_KERNEL_RWX
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 91537d90f5f5..e4370810f4f1 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -27,259 +27,7 @@ unsigned long vectors_base;
#ifdef CONFIG_ARM_MPU
struct mpu_rgn_info mpu_rgn_info;
-
-/* Region number */
-static void rgnr_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c2, 0" : : "r" (v));
-}
-
-/* Data-side / unified region attributes */
-
-/* Region access control register */
-static void dracr_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 4" : : "r" (v));
-}
-
-/* Region size register */
-static void drsr_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 2" : : "r" (v));
-}
-
-/* Region base address register */
-static void drbar_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 0" : : "r" (v));
-}
-
-static u32 drbar_read(void)
-{
- u32 v;
- asm("mrc p15, 0, %0, c6, c1, 0" : "=r" (v));
- return v;
-}
-/* Optional instruction-side region attributes */
-
-/* I-side Region access control register */
-static void iracr_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 5" : : "r" (v));
-}
-
-/* I-side Region size register */
-static void irsr_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 3" : : "r" (v));
-}
-
-/* I-side Region base address register */
-static void irbar_write(u32 v)
-{
- asm("mcr p15, 0, %0, c6, c1, 1" : : "r" (v));
-}
-
-static unsigned long irbar_read(void)
-{
- unsigned long v;
- asm("mrc p15, 0, %0, c6, c1, 1" : "=r" (v));
- return v;
-}
-
-/* MPU initialisation functions */
-void __init adjust_lowmem_bounds_mpu(void)
-{
- phys_addr_t phys_offset = PHYS_OFFSET;
- phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
- struct memblock_region *reg;
- bool first = true;
- phys_addr_t mem_start;
- phys_addr_t mem_end;
-
- for_each_memblock(memory, reg) {
- if (first) {
- /*
- * Initially only use memory continuous from
- * PHYS_OFFSET */
- if (reg->base != phys_offset)
- panic("First memory bank must be contiguous from PHYS_OFFSET");
-
- mem_start = reg->base;
- mem_end = reg->base + reg->size;
- specified_mem_size = reg->size;
- first = false;
- } else {
- /*
- * memblock auto merges contiguous blocks, remove
- * all blocks afterwards in one go (we can't remove
- * blocks separately while iterating)
- */
- pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
- &mem_end, &reg->base);
- memblock_remove(reg->base, 0 - reg->base);
- break;
- }
- }
-
- /*
- * MPU has curious alignment requirements: Size must be power of 2, and
- * region start must be aligned to the region size
- */
- if (phys_offset != 0)
- pr_info("PHYS_OFFSET != 0 => MPU Region size constrained by alignment requirements\n");
-
- /*
- * Maximum aligned region might overflow phys_addr_t if phys_offset is
- * 0. Hence we keep everything below 4G until we take the smaller of
- * the aligned_region_size and rounded_mem_size, one of which is
- * guaranteed to be smaller than the maximum physical address.
- */
- aligned_region_size = (phys_offset - 1) ^ (phys_offset);
- /* Find the max power-of-two sized region that fits inside our bank */
- rounded_mem_size = (1 << __fls(specified_mem_size)) - 1;
-
- /* The actual region size is the smaller of the two */
- aligned_region_size = aligned_region_size < rounded_mem_size
- ? aligned_region_size + 1
- : rounded_mem_size + 1;
-
- if (aligned_region_size != specified_mem_size) {
- pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
- &specified_mem_size, &aligned_region_size);
- memblock_remove(mem_start + aligned_region_size,
- specified_mem_size - aligned_region_size);
-
- mem_end = mem_start + aligned_region_size;
- }
-
- pr_debug("MPU Region from %pa size %pa (end %pa))\n",
- &phys_offset, &aligned_region_size, &mem_end);
-
-}
-
-static int mpu_present(void)
-{
- return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
-}
-
-static int mpu_max_regions(void)
-{
- /*
- * We don't support a different number of I/D side regions so if we
- * have separate instruction and data memory maps then return
- * whichever side has a smaller number of supported regions.
- */
- u32 dregions, iregions, mpuir;
- mpuir = read_cpuid(CPUID_MPUIR);
-
- dregions = iregions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
-
- /* Check for separate d-side and i-side memory maps */
- if (mpuir & MPUIR_nU)
- iregions = (mpuir & MPUIR_IREGION_SZMASK) >> MPUIR_IREGION;
-
- /* Use the smallest of the two maxima */
- return min(dregions, iregions);
-}
-
-static int mpu_iside_independent(void)
-{
- /* MPUIR.nU specifies whether there is *not* a unified memory map */
- return read_cpuid(CPUID_MPUIR) & MPUIR_nU;
-}
-
-static int mpu_min_region_order(void)
-{
- u32 drbar_result, irbar_result;
- /* We've kept a region free for this probing */
- rgnr_write(MPU_PROBE_REGION);
- isb();
- /*
- * As per ARM ARM, write 0xFFFFFFFC to DRBAR to find the minimum
- * region order
- */
- drbar_write(0xFFFFFFFC);
- drbar_result = irbar_result = drbar_read();
- drbar_write(0x0);
- /* If the MPU is non-unified, we use the larger of the two minima*/
- if (mpu_iside_independent()) {
- irbar_write(0xFFFFFFFC);
- irbar_result = irbar_read();
- irbar_write(0x0);
- }
- isb(); /* Ensure that MPU region operations have completed */
- /* Return whichever result is larger */
- return __ffs(max(drbar_result, irbar_result));
-}
-
-static int mpu_setup_region(unsigned int number, phys_addr_t start,
- unsigned int size_order, unsigned int properties)
-{
- u32 size_data;
-
- /* We kept a region free for probing resolution of MPU regions*/
- if (number > mpu_max_regions() || number == MPU_PROBE_REGION)
- return -ENOENT;
-
- if (size_order > 32)
- return -ENOMEM;
-
- if (size_order < mpu_min_region_order())
- return -ENOMEM;
-
- /* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */
- size_data = ((size_order - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN;
-
- dsb(); /* Ensure all previous data accesses occur with old mappings */
- rgnr_write(number);
- isb();
- drbar_write(start);
- dracr_write(properties);
- isb(); /* Propagate properties before enabling region */
- drsr_write(size_data);
-
- /* Check for independent I-side registers */
- if (mpu_iside_independent()) {
- irbar_write(start);
- iracr_write(properties);
- isb();
- irsr_write(size_data);
- }
- isb();
-
- /* Store region info (we treat i/d side the same, so only store d) */
- mpu_rgn_info.rgns[number].dracr = properties;
- mpu_rgn_info.rgns[number].drbar = start;
- mpu_rgn_info.rgns[number].drsr = size_data;
- return 0;
-}
-
-/*
-* Set up default MPU regions, doing nothing if there is no MPU
-*/
-void __init mpu_setup(void)
-{
- int region_err;
- if (!mpu_present())
- return;
-
- region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
- ilog2(memblock.memory.regions[0].size),
- MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
- if (region_err) {
- panic("MPU region initialization failure! %d", region_err);
- } else {
- pr_info("Using ARMv7 PMSA Compliant MPU. "
- "Region independence: %s, Max regions: %d\n",
- mpu_iside_independent() ? "Yes" : "No",
- mpu_max_regions());
- }
-}
-#else
-static void adjust_lowmem_bounds_mpu(void) {}
-static void __init mpu_setup(void) {}
-#endif /* CONFIG_ARM_MPU */
+#endif
#ifdef CONFIG_CPU_CP15
#ifdef CONFIG_CPU_HIGH_VECTOR
diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c
new file mode 100644
index 000000000000..976df60ac426
--- /dev/null
+++ b/arch/arm/mm/pmsa-v7.c
@@ -0,0 +1,484 @@
+/*
+ * Based on linux/arch/arm/mm/nommu.c
+ *
+ * ARM PMSAv7 supporting functions.
+ */
+
+#include <linux/bitops.h>
+#include <linux/memblock.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/cputype.h>
+#include <asm/mpu.h>
+#include <asm/sections.h>
+
+#include "mm.h"
+
+struct region {
+ phys_addr_t base;
+ phys_addr_t size;
+ unsigned long subreg;
+};
+
+static struct region __initdata mem[MPU_MAX_REGIONS];
+#ifdef CONFIG_XIP_KERNEL
+static struct region __initdata xip[MPU_MAX_REGIONS];
+#endif
+
+static unsigned int __initdata mpu_min_region_order;
+static unsigned int __initdata mpu_max_regions;
+
+static int __init __mpu_min_region_order(void);
+static int __init __mpu_max_regions(void);
+
+#ifndef CONFIG_CPU_V7M
+
+#define DRBAR __ACCESS_CP15(c6, 0, c1, 0)
+#define IRBAR __ACCESS_CP15(c6, 0, c1, 1)
+#define DRSR __ACCESS_CP15(c6, 0, c1, 2)
+#define IRSR __ACCESS_CP15(c6, 0, c1, 3)
+#define DRACR __ACCESS_CP15(c6, 0, c1, 4)
+#define IRACR __ACCESS_CP15(c6, 0, c1, 5)
+#define RNGNR __ACCESS_CP15(c6, 0, c2, 0)
+
+/* Region number */
+static inline void rgnr_write(u32 v)
+{
+ write_sysreg(v, RNGNR);
+}
+
+/* Data-side / unified region attributes */
+
+/* Region access control register */
+static inline void dracr_write(u32 v)
+{
+ write_sysreg(v, DRACR);
+}
+
+/* Region size register */
+static inline void drsr_write(u32 v)
+{
+ write_sysreg(v, DRSR);
+}
+
+/* Region base address register */
+static inline void drbar_write(u32 v)
+{
+ write_sysreg(v, DRBAR);
+}
+
+static inline u32 drbar_read(void)
+{
+ return read_sysreg(DRBAR);
+}
+/* Optional instruction-side region attributes */
+
+/* I-side Region access control register */
+static inline void iracr_write(u32 v)
+{
+ write_sysreg(v, IRACR);
+}
+
+/* I-side Region size register */
+static inline void irsr_write(u32 v)
+{
+ write_sysreg(v, IRSR);
+}
+
+/* I-side Region base address register */
+static inline void irbar_write(u32 v)
+{
+ write_sysreg(v, IRBAR);
+}
+
+static inline u32 irbar_read(void)
+{
+ return read_sysreg(IRBAR);
+}
+
+#else
+
+static inline void rgnr_write(u32 v)
+{
+ writel_relaxed(v, BASEADDR_V7M_SCB + MPU_RNR);
+}
+
+/* Data-side / unified region attributes */
+
+/* Region access control register */
+static inline void dracr_write(u32 v)
+{
+ u32 rsr = readl_relaxed(BASEADDR_V7M_SCB + MPU_RASR) & GENMASK(15, 0);
+
+ writel_relaxed((v << 16) | rsr, BASEADDR_V7M_SCB + MPU_RASR);
+}
+
+/* Region size register */
+static inline void drsr_write(u32 v)
+{
+ u32 racr = readl_relaxed(BASEADDR_V7M_SCB + MPU_RASR) & GENMASK(31, 16);
+
+ writel_relaxed(v | racr, BASEADDR_V7M_SCB + MPU_RASR);
+}
+
+/* Region base address register */
+static inline void drbar_write(u32 v)
+{
+ writel_relaxed(v, BASEADDR_V7M_SCB + MPU_RBAR);
+}
+
+static inline u32 drbar_read(void)
+{
+ return readl_relaxed(BASEADDR_V7M_SCB + MPU_RBAR);
+}
+
+/* ARMv7-M only supports a unified MPU, so I-side operations are nop */
+
+static inline void iracr_write(u32 v) {}
+static inline void irsr_write(u32 v) {}
+static inline void irbar_write(u32 v) {}
+static inline unsigned long irbar_read(void) {return 0;}
+
+#endif
+
+static int __init mpu_present(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR0) & MMFR0_PMSA) == MMFR0_PMSAv7);
+}
+
+static bool __init try_split_region(phys_addr_t base, phys_addr_t size, struct region *region)
+{
+ unsigned long subreg, bslots, sslots;
+ phys_addr_t abase = base & ~(size - 1);
+ phys_addr_t asize = base + size - abase;
+ phys_addr_t p2size = 1 << __fls(asize);
+ phys_addr_t bdiff, sdiff;
+
+ if (p2size != asize)
+ p2size *= 2;
+
+ bdiff = base - abase;
+ sdiff = p2size - asize;
+ subreg = p2size / MPU_NR_SUBREGS;
+
+ if ((bdiff % subreg) || (sdiff % subreg))
+ return false;
+
+ bslots = bdiff / subreg;
+ sslots = sdiff / subreg;
+
+ if (bslots || sslots) {
+ int i;
+
+ if (subreg < MPU_MIN_SUBREG_SIZE)
+ return false;
+
+ if (bslots + sslots > MPU_NR_SUBREGS)
+ return false;
+
+ for (i = 0; i < bslots; i++)
+ _set_bit(i, &region->subreg);
+
+ for (i = 1; i <= sslots; i++)
+ _set_bit(MPU_NR_SUBREGS - i, &region->subreg);
+ }
+
+ region->base = abase;
+ region->size = p2size;
+
+ return true;
+}
+
+static int __init allocate_region(phys_addr_t base, phys_addr_t size,
+ unsigned int limit, struct region *regions)
+{
+ int count = 0;
+ phys_addr_t diff = size;
+ int attempts = MPU_MAX_REGIONS;
+
+ while (diff) {
+ /* Try cover region as is (maybe with help of subregions) */
+ if (try_split_region(base, size, &regions[count])) {
+ count++;
+ base += size;
+ diff -= size;
+ size = diff;
+ } else {
+ /*
+ * Maximum aligned region might overflow phys_addr_t
+ * if "base" is 0. Hence we keep everything below 4G
+ * until we take the smaller of the aligned region
+ * size ("asize") and rounded region size ("p2size"),
+ * one of which is guaranteed to be smaller than the
+ * maximum physical address.
+ */
+ phys_addr_t asize = (base - 1) ^ base;
+ phys_addr_t p2size = (1 << __fls(diff)) - 1;
+
+ size = asize < p2size ? asize + 1 : p2size + 1;
+ }
+
+ if (count > limit)
+ break;
+
+ if (!attempts)
+ break;
+
+ attempts--;
+ }
+
+ return count;
+}
+
+/* MPU initialisation functions */
+void __init adjust_lowmem_bounds_mpu(void)
+{
+ phys_addr_t specified_mem_size = 0, total_mem_size = 0;
+ struct memblock_region *reg;
+ bool first = true;
+ phys_addr_t mem_start;
+ phys_addr_t mem_end;
+ unsigned int mem_max_regions;
+ int num, i;
+
+ if (!mpu_present())
+ return;
+
+ /* Free-up MPU_PROBE_REGION */
+ mpu_min_region_order = __mpu_min_region_order();
+
+ /* How many regions are supported */
+ mpu_max_regions = __mpu_max_regions();
+
+ mem_max_regions = min((unsigned int)MPU_MAX_REGIONS, mpu_max_regions);
+
+ /* We need to keep one slot for background region */
+ mem_max_regions--;
+
+#ifndef CONFIG_CPU_V7M
+ /* ... and one for vectors */
+ mem_max_regions--;
+#endif
+
+#ifdef CONFIG_XIP_KERNEL
+ /* plus some regions to cover XIP ROM */
+ num = allocate_region(CONFIG_XIP_PHYS_ADDR, __pa(_exiprom) - CONFIG_XIP_PHYS_ADDR,
+ mem_max_regions, xip);
+
+ mem_max_regions -= num;
+#endif
+
+ for_each_memblock(memory, reg) {
+ if (first) {
+ phys_addr_t phys_offset = PHYS_OFFSET;
+
+ /*
+ * Initially only use memory continuous from
+ * PHYS_OFFSET */
+ if (reg->base != phys_offset)
+ panic("First memory bank must be contiguous from PHYS_OFFSET");
+
+ mem_start = reg->base;
+ mem_end = reg->base + reg->size;
+ specified_mem_size = reg->size;
+ first = false;
+ } else {
+ /*
+ * memblock auto merges contiguous blocks, remove
+ * all blocks afterwards in one go (we can't remove
+ * blocks separately while iterating)
+ */
+ pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
+ &mem_end, &reg->base);
+ memblock_remove(reg->base, 0 - reg->base);
+ break;
+ }
+ }
+
+ num = allocate_region(mem_start, specified_mem_size, mem_max_regions, mem);
+
+ for (i = 0; i < num; i++) {
+ unsigned long subreg = mem[i].size / MPU_NR_SUBREGS;
+
+ total_mem_size += mem[i].size - subreg * hweight_long(mem[i].subreg);
+
+ pr_debug("MPU: base %pa size %pa disable subregions: %*pbl\n",
+ &mem[i].base, &mem[i].size, MPU_NR_SUBREGS, &mem[i].subreg);
+ }
+
+ if (total_mem_size != specified_mem_size) {
+ pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
+ &specified_mem_size, &total_mem_size);
+ memblock_remove(mem_start + total_mem_size,
+ specified_mem_size - total_mem_size);
+ }
+}
+
+static int __init __mpu_max_regions(void)
+{
+ /*
+ * We don't support a different number of I/D side regions so if we
+ * have separate instruction and data memory maps then return
+ * whichever side has a smaller number of supported regions.
+ */
+ u32 dregions, iregions, mpuir;
+
+ mpuir = read_cpuid_mputype();
+
+ dregions = iregions = (mpuir & MPUIR_DREGION_SZMASK) >> MPUIR_DREGION;
+
+ /* Check for separate d-side and i-side memory maps */
+ if (mpuir & MPUIR_nU)
+ iregions = (mpuir & MPUIR_IREGION_SZMASK) >> MPUIR_IREGION;
+
+ /* Use the smallest of the two maxima */
+ return min(dregions, iregions);
+}
+
+static int __init mpu_iside_independent(void)
+{
+ /* MPUIR.nU specifies whether there is *not* a unified memory map */
+ return read_cpuid_mputype() & MPUIR_nU;
+}
+
+static int __init __mpu_min_region_order(void)
+{
+ u32 drbar_result, irbar_result;
+
+ /* We've kept a region free for this probing */
+ rgnr_write(MPU_PROBE_REGION);
+ isb();
+ /*
+ * As per ARM ARM, write 0xFFFFFFFC to DRBAR to find the minimum
+ * region order
+ */
+ drbar_write(0xFFFFFFFC);
+ drbar_result = irbar_result = drbar_read();
+ drbar_write(0x0);
+ /* If the MPU is non-unified, we use the larger of the two minima*/
+ if (mpu_iside_independent()) {
+ irbar_write(0xFFFFFFFC);
+ irbar_result = irbar_read();
+ irbar_write(0x0);
+ }
+ isb(); /* Ensure that MPU region operations have completed */
+ /* Return whichever result is larger */
+
+ return __ffs(max(drbar_result, irbar_result));
+}
+
+static int __init mpu_setup_region(unsigned int number, phys_addr_t start,
+ unsigned int size_order, unsigned int properties,
+ unsigned int subregions, bool need_flush)
+{
+ u32 size_data;
+
+ /* We kept a region free for probing resolution of MPU regions*/
+ if (number > mpu_max_regions
+ || number >= MPU_MAX_REGIONS)
+ return -ENOENT;
+
+ if (size_order > 32)
+ return -ENOMEM;
+
+ if (size_order < mpu_min_region_order)
+ return -ENOMEM;
+
+ /* Writing N to bits 5:1 (RSR_SZ) specifies region size 2^N+1 */
+ size_data = ((size_order - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN;
+ size_data |= subregions << MPU_RSR_SD;
+
+ if (need_flush)
+ flush_cache_all();
+
+ dsb(); /* Ensure all previous data accesses occur with old mappings */
+ rgnr_write(number);
+ isb();
+ drbar_write(start);
+ dracr_write(properties);
+ isb(); /* Propagate properties before enabling region */
+ drsr_write(size_data);
+
+ /* Check for independent I-side registers */
+ if (mpu_iside_independent()) {
+ irbar_write(start);
+ iracr_write(properties);
+ isb();
+ irsr_write(size_data);
+ }
+ isb();
+
+ /* Store region info (we treat i/d side the same, so only store d) */
+ mpu_rgn_info.rgns[number].dracr = properties;
+ mpu_rgn_info.rgns[number].drbar = start;
+ mpu_rgn_info.rgns[number].drsr = size_data;
+
+ mpu_rgn_info.used++;
+
+ return 0;
+}
+
+/*
+* Set up default MPU regions, doing nothing if there is no MPU
+*/
+void __init mpu_setup(void)
+{
+ int i, region = 0, err = 0;
+
+ if (!mpu_present())
+ return;
+
+ /* Setup MPU (order is important) */
+
+ /* Background */
+ err |= mpu_setup_region(region++, 0, 32,
+ MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA,
+ 0, false);
+
+#ifdef CONFIG_XIP_KERNEL
+ /* ROM */
+ for (i = 0; i < ARRAY_SIZE(xip); i++) {
+ /*
+ * In case we overwrite RAM region we set earlier in
+ * head-nommu.S (which is cachable) all subsequent
+ * data access till we setup RAM bellow would be done
+ * with BG region (which is uncachable), thus we need
+ * to clean and invalidate cache.
+ */
+ bool need_flush = region == MPU_RAM_REGION;
+
+ if (!xip[i].size)
+ continue;
+
+ err |= mpu_setup_region(region++, xip[i].base, ilog2(xip[i].size),
+ MPU_AP_PL1RO_PL0NA | MPU_RGN_NORMAL,
+ xip[i].subreg, need_flush);
+ }
+#endif
+
+ /* RAM */
+ for (i = 0; i < ARRAY_SIZE(mem); i++) {
+ if (!mem[i].size)
+ continue;
+
+ err |= mpu_setup_region(region++, mem[i].base, ilog2(mem[i].size),
+ MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL,
+ mem[i].subreg, false);
+ }
+
+ /* Vectors */
+#ifndef CONFIG_CPU_V7M
+ err |= mpu_setup_region(region++, vectors_base, ilog2(2 * PAGE_SIZE),
+ MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL,
+ 0, false);
+#endif
+ if (err) {
+ panic("MPU region initialization failure! %d", err);
+ } else {
+ pr_info("Using ARMv7 PMSA Compliant MPU. "
+ "Region independence: %s, Used %d of %d regions\n",
+ mpu_iside_independent() ? "Yes" : "No",
+ mpu_rgn_info.used, mpu_max_regions);
+ }
+}