summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-06-18 20:36:17 -1000
committerLinus Torvalds <torvalds@linux-foundation.org>2016-06-18 20:36:17 -1000
commit049a40c0a2d4b458583161ec1b9ce109408cb1aa (patch)
treee304d16877c0446b1a6119e8bfa469419b38efa9 /arch/arm
parentc141afd1a28793c08c88325aa64b773be6f79ccf (diff)
parent8fd0976702f05042c776848819e5fd2a835f23c9 (diff)
downloadlinux-049a40c0a2d4b458583161ec1b9ce109408cb1aa.tar.bz2
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: "Another batch of fixes for ARM SoC platforms. Most are smaller fixes. Two areas that are worth pointing out are: - OMAP had a handful of changes to voltage specs that caused a bit of churn, most of volume of change in this branch is due to this. - There are a couple of _rcuidle fixes from Paul that touch common code and came in through the OMAP tree since they were the ones who saw the problems. The rest is smaller changes across a handful of platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: dts: STi: stih407-family: Disable reserved-memory co-processor nodes ARM: dts: am437x-sk-evm: Reduce i2c0 bus speed for tps65218 ARM: OMAP2+: timer: add probe for clocksources ARM: OMAP1: fix ams-delta FIQ handler to work with sparse IRQ memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing arm: Use _rcuidle for smp_cross_call() tracepoints MAINTAINERS: Add myself as reviewer of ARM FSL/NXP ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_mem_ret ARM: OMAP: DRA7: powerdomain data: Remove unused pwrsts_logic_ret ARM: OMAP: DRA7: powerdomain data: Set L3init and L4per to ON ARM: imx6ul: Fix Micrel PHY mask ARM: OMAP2+: Select OMAP_INTERCONNECT for SOC_AM43XX ARM: dts: DRA74x: fix DSS PLL2 addresses ARM: OMAP2: Enable Errata 430973 for OMAP3 ARM: dts: socfpga: Add missing PHY phandle ARM: dts: exynos: Fix port nodes names for Exynos5420 Peach Pit board ARM: dts: exynos: Fix port nodes names for Exynos5250 Snow board ARM: dts: sun6i: yones-toptech-bs1078-v2: Drop constraints on dc1sw regulator ARM: dts: sun6i: primo81: Drop constraints on dc1sw regulator ARM: dts: sunxi: Add OLinuXino Lime2 eMMC to the Makefile ...
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/Makefile1
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts2
-rw-r--r--arch/arm/boot/dts/am57xx-idk-common.dtsi32
-rw-r--r--arch/arm/boot/dts/dm8148-evm.dts8
-rw-r--r--arch/arm/boot/dts/dm8148-t410.dts9
-rw-r--r--arch/arm/boot/dts/dra7.dtsi2
-rw-r--r--arch/arm/boot/dts/dra74x.dtsi4
-rw-r--r--arch/arm/boot/dts/exynos5250-snow-common.dtsi13
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts13
-rw-r--r--arch/arm/boot/dts/omap3-evm-37xx.dts2
-rw-r--r--arch/arm/boot/dts/omap3-igep.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3-igep0020-common.dtsi11
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3-n950-n9.dtsi6
-rw-r--r--arch/arm/boot/dts/omap3-zoom3.dts6
-rw-r--r--arch/arm/boot/dts/omap5-board-common.dtsi48
-rw-r--r--arch/arm/boot/dts/omap5-igep0050.dts26
-rw-r--r--arch/arm/boot/dts/omap5-uevm.dts10
-rw-r--r--arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts1
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi3
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-primo81.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts2
-rw-r--r--arch/arm/configs/exynos_defconfig1
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/kernel/smp.c2
-rw-r--r--arch/arm/mach-exynos/Kconfig1
-rw-r--r--arch/arm/mach-imx/mach-imx6ul.c2
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S6
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq.c5
-rw-r--r--arch/arm/mach-omap1/include/mach/ams-delta-fiq.h2
-rw-r--r--arch/arm/mach-omap2/Kconfig12
-rw-r--r--arch/arm/mach-omap2/omap-secure.h1
-rw-r--r--arch/arm/mach-omap2/omap-smp.c48
-rw-r--r--arch/arm/mach-omap2/powerdomain.c9
-rw-r--r--arch/arm/mach-omap2/powerdomains7xx_data.c76
-rw-r--r--arch/arm/mach-omap2/timer.c7
-rw-r--r--arch/arm/plat-samsung/devs.c2
37 files changed, 248 insertions, 133 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d695bf..414b42710a36 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -741,6 +741,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som-evb.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime2.dtb \
+ sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-orangepi.dtb \
sun7i-a20-orangepi-mini.dtb \
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index d82dd6e3f9b1..5687d6b4da60 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -418,7 +418,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
tps@24 {
compatible = "ti,tps65218";
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index b01a5948cdd0..0e63b9dff6e7 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -60,10 +60,26 @@
tps659038_pmic {
compatible = "ti,tps659038-pmic";
+
+ smps12-in-supply = <&vmain>;
+ smps3-in-supply = <&vmain>;
+ smps45-in-supply = <&vmain>;
+ smps6-in-supply = <&vmain>;
+ smps7-in-supply = <&vmain>;
+ smps8-in-supply = <&vmain>;
+ smps9-in-supply = <&vmain>;
+ ldo1-in-supply = <&vmain>;
+ ldo2-in-supply = <&vmain>;
+ ldo3-in-supply = <&vmain>;
+ ldo4-in-supply = <&vmain>;
+ ldo9-in-supply = <&vmain>;
+ ldoln-in-supply = <&vmain>;
+ ldousb-in-supply = <&vmain>;
+ ldortc-in-supply = <&vmain>;
+
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
- vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -73,7 +89,6 @@
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
- vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@@ -84,7 +99,6 @@
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
- vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -94,7 +108,6 @@
smps6_reg: smps6 {
/* VDD_GPU */
- vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@@ -104,7 +117,6 @@
smps7_reg: smps7 {
/* VDD_CORE */
- vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@@ -115,13 +127,11 @@
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
- vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
- vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -132,7 +142,6 @@
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
- vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -142,7 +151,6 @@
ldo2_reg: ldo2 {
/* VDDSH18V */
- vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -152,7 +160,6 @@
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
- vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -162,7 +169,6 @@
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
- vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -174,7 +180,6 @@
ldo9_reg: ldo9 {
/* VDD_RTC */
- vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@@ -184,7 +189,6 @@
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
- vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -194,7 +198,6 @@
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
- vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -204,7 +207,6 @@
ldortc_reg: ldortc {
/* VDDA_RTC */
- vin-supply = <&vmain>;
regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index cbc17b0794b1..4128fa91823c 100644
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -93,6 +93,10 @@
};
};
+&mmc1 {
+ status = "disabled";
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pins>;
@@ -101,6 +105,10 @@
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
+&mmc3 {
+ status = "disabled";
+};
+
&pincntl {
sd1_pins: pinmux_sd1_pins {
pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 5d4313fd5a46..3f184863e0c5 100644
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -45,6 +45,14 @@
phy-mode = "rgmii";
};
+&mmc1 {
+ status = "disabled";
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&sd2_pins>;
@@ -53,6 +61,7 @@
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
dma-names = "tx", "rx";
+ non-removable;
};
&pincntl {
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e0074014385a..3a8f3976f6f9 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1451,6 +1451,8 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 4220eeffc65a..5e06020f450b 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -107,8 +107,8 @@
reg = <0x58000000 0x80>,
<0x58004054 0x4>,
<0x58004300 0x20>,
- <0x58005054 0x4>,
- <0x58005300 0x20>;
+ <0x58009054 0x4>,
+ <0x58009300 0x20>;
reg-names = "dss", "pll1_clkctrl", "pll1",
"pll2_clkctrl", "pll2";
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index ddfe1f558c10..fa14f77df563 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -242,7 +242,7 @@
hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
ports {
- port0 {
+ port {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
@@ -485,13 +485,20 @@
edid-emulation = <5>;
ports {
- port0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
- port1 {
+ port@1 {
+ reg = <1>;
+
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index f9d2e4f1a0e0..1de972d46a87 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -163,7 +163,7 @@
hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
- port0 {
+ port {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
@@ -631,13 +631,20 @@
use-external-pwm;
ports {
- port0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
- port1 {
+ port@1 {
+ reg = <1>;
+
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 76056ba92ced..ed449827c3d3 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -85,7 +85,7 @@
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
- OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+ OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 41f5d386f21f..f4f2ce46d681 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -188,6 +188,7 @@
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <4>;
+ cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
};
&mmc3 {
diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index d6f839cab649..b6971060648a 100644
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -194,6 +194,12 @@
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
>;
};
+
+ mmc1_wp_pins: pinmux_mmc1_cd_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
+ >;
+ };
};
&i2c3 {
@@ -250,3 +256,8 @@
};
};
};
+
+&mmc1 {
+ pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+ wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d9e2d9c6e999..2b74a81d1de2 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -288,7 +288,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
@@ -300,7 +300,7 @@
modem_pins: pinmux_modem {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
- OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index a00ca761675d..927b17fc4ed8 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -97,7 +97,7 @@
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
@@ -110,7 +110,7 @@
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
- OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
@@ -120,7 +120,7 @@
modem_pins1: pinmux_modem_core1_pins {
pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
>;
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index f19170bdcc1f..c29b41dc7b95 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -98,7 +98,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
- OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
@@ -107,7 +107,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
- OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
@@ -125,7 +125,7 @@
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
- OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
>;
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index dc759a3028b7..5d5b620b7d9b 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -14,6 +14,29 @@
display0 = &hdmi0;
};
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vsys_cobra: fixedregulator-vsys_cobra {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_cobra";
+ vin-supply = <&vmain>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdds_1v8_main: fixedregulator-vdds_1v8_main {
+ compatible = "regulator-fixed";
+ regulator-name = "vdds_1v8_main";
+ vin-supply = <&smps7_reg>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@@ -309,7 +332,7 @@
wlcore_irq_pin: pinmux_wlcore_irq_pin {
pinctrl-single,pins = <
- OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
+ OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
>;
};
};
@@ -409,6 +432,26 @@
ti,ldo6-vibrator;
+ smps123-in-supply = <&vsys_cobra>;
+ smps45-in-supply = <&vsys_cobra>;
+ smps6-in-supply = <&vsys_cobra>;
+ smps7-in-supply = <&vsys_cobra>;
+ smps8-in-supply = <&vsys_cobra>;
+ smps9-in-supply = <&vsys_cobra>;
+ smps10_out2-in-supply = <&vsys_cobra>;
+ smps10_out1-in-supply = <&vsys_cobra>;
+ ldo1-in-supply = <&vsys_cobra>;
+ ldo2-in-supply = <&vsys_cobra>;
+ ldo3-in-supply = <&vdds_1v8_main>;
+ ldo4-in-supply = <&vdds_1v8_main>;
+ ldo5-in-supply = <&vsys_cobra>;
+ ldo6-in-supply = <&vdds_1v8_main>;
+ ldo7-in-supply = <&vsys_cobra>;
+ ldo8-in-supply = <&vsys_cobra>;
+ ldo9-in-supply = <&vmmcsd_fixed>;
+ ldoln-in-supply = <&vsys_cobra>;
+ ldousb-in-supply = <&vsys_cobra>;
+
regulators {
smps123_reg: smps123 {
/* VDD_OPP_MPU */
@@ -600,7 +643,8 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
- ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
+
+ /* audpwron gpio defined in the board specific dts */
vio-supply = <&smps7_reg>;
v2v1-supply = <&smps9_reg>;
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 46ecb1dd3b5c..f75ce02fb398 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,22 @@
};
};
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+ status = "okay";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+};
+
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
@@ -52,3 +68,13 @@
<&gpio7 3 0>; /* 195, SDA */
};
+&twl6040 {
+ ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */
+};
+
+&twl6040_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */
+ OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
+ >;
+};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 60b3fbb3bf07..a51e60518eb6 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -51,3 +51,13 @@
<&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
<&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};
+
+&twl6040 {
+ ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
+};
+
+&twl6040_pins {
+ pinctrl-single,pins = <
+ OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
+ >;
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a3601e4c0a2e..b844473601d2 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -136,6 +136,7 @@
&gmac1 {
status = "okay";
phy-mode = "rgmii";
+ phy-handle = <&phy1>;
snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index ad8ba10764a3..d294e82447a2 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -24,18 +24,21 @@
compatible = "shared-dma-pool";
reg = <0x40000000 0x01000000>;
no-map;
+ status = "disabled";
};
gp1_reserved: rproc@41000000 {
compatible = "shared-dma-pool";
reg = <0x41000000 0x01000000>;
no-map;
+ status = "disabled";
};
audio_reserved: rproc@42000000 {
compatible = "shared-dma-pool";
reg = <0x42000000 0x01000000>;
no-map;
+ status = "disabled";
};
dmu_reserved: rproc@43000000 {
diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 68b479b8772c..73c133f5e79c 100644
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -176,8 +176,6 @@
};
&reg_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};
diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 360adfb1e9ca..d6ad6196a768 100644
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -135,8 +135,6 @@
&reg_dc1sw {
regulator-name = "vcc-lcd-usb2";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
};
&reg_dc5ldo {
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 10f49ab5328e..47195e8690b4 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -82,6 +82,7 @@ CONFIG_TOUCHSCREEN_MMS114=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MAX77693_HAPTIC=y
CONFIG_INPUT_MAX8997_HAPTIC=y
+CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8f857564657f..8a5fff1b7f6f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -264,6 +264,7 @@ CONFIG_KEYBOARD_TEGRA=y
CONFIG_KEYBOARD_SPEAR=y
CONFIG_KEYBOARD_ST_KEYSCAN=y
CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_KEYBOARD_SAMSUNG=m
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=y
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index df90bc59bfce..861521606c6d 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -486,7 +486,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
{
- trace_ipi_raise(target, ipi_types[ipinr]);
+ trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
__smp_cross_call(target, ipinr);
}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e65aa7d11b20..20dcf6e904b2 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,7 +61,6 @@ config ARCH_EXYNOS4
select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
select CPU_EXYNOS4210
select GIC_NON_BANKED
- select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 (Cortex-A9) SoC based systems
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index a38b16b69923..b56de4b8cdf2 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -46,7 +46,7 @@ static int ksz8081_phy_fixup(struct phy_device *dev)
static void __init imx6ul_enet_phy_init(void)
{
if (IS_BUILTIN(CONFIG_PHYLIB))
- phy_register_fixup_for_uid(PHY_ID_KSZ8081, 0xffffffff,
+ phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
ksz8081_phy_fixup);
}
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 5d7fb596bf4a..bf608441b357 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -43,8 +43,8 @@
#define OTHERS_MASK (MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
/* IRQ handler register bitmasks */
-#define DEFERRED_FIQ_MASK (0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
-#define GPIO_BANK1_MASK (0x1 << INT_GPIO_BANK1)
+#define DEFERRED_FIQ_MASK OMAP_IRQ_BIT(INT_DEFERRED_FIQ)
+#define GPIO_BANK1_MASK OMAP_IRQ_BIT(INT_GPIO_BANK1)
/* Driver buffer byte offsets */
#define BUF_MASK (FIQ_MASK * 4)
@@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start)
mov r8, #2 @ reset FIQ agreement
str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
- cmp r10, #INT_GPIO_BANK1 @ is it GPIO bank interrupt?
+ cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt?
beq gpio @ yes - process it
mov r8, #1
diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index d1f12095f315..ec760ae2f917 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void)
* Since no set_type() method is provided by OMAP irq chip,
* switch to edge triggered interrupt type manually.
*/
- offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+ offset = IRQ_ILR0_REG_OFFSET +
+ ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
@@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void)
/*
* Redirect GPIO interrupts to FIQ
*/
- offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+ offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
val = omap_readl(OMAP_IH1_BASE + offset) | 1;
omap_writel(val, OMAP_IH1_BASE + offset);
}
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index adb5e7649659..6dfc3e1210a3 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,6 +14,8 @@
#ifndef __AMS_DELTA_FIQ_H
#define __AMS_DELTA_FIQ_H
+#include <mach/irqs.h>
+
/*
* Interrupt number used for passing control from FIQ to IRQ.
* IRQ12, described as reserved, has been selected.
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0517f0c1581a..1a648e9dfaa0 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP3
select PM_OPP if PM
select PM if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
+ select ARM_ERRATA_430973
config ARCH_OMAP4
bool "TI OMAP4"
@@ -36,6 +37,7 @@ config ARCH_OMAP4
select PM if CPU_IDLE
select ARM_ERRATA_754322
select ARM_ERRATA_775420
+ select OMAP_INTERCONNECT
config SOC_OMAP5
bool "TI OMAP5"
@@ -67,6 +69,8 @@ config SOC_AM43XX
select HAVE_ARM_SCU
select GENERIC_CLOCKEVENTS_BROADCAST
select HAVE_ARM_TWD
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
config SOC_DRA7XX
bool "TI DRA7XX"
@@ -240,4 +244,12 @@ endmenu
endif
+config OMAP5_ERRATA_801819
+ bool "Errata 801819: An eviction from L1 data cache might stall indefinitely"
+ depends on SOC_OMAP5 || SOC_DRA7XX
+ help
+ A livelock can occur in the L2 cache arbitration that might prevent
+ a snoop from completing. Under certain conditions this can cause the
+ system to deadlock.
+
endmenu
diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index af2851fbcdf0..bae263fba640 100644
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -46,6 +46,7 @@
#define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX 0x109
#define OMAP5_MON_AMBA_IF_INDEX 0x108
+#define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107
/* Secure PPA(Primary Protected Application) APIs */
#define OMAP4_PPA_L2_POR_INDEX 0x23
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index c625cc10d9f9..8cd1de914ee4 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -50,6 +50,39 @@ void __iomem *omap4_get_scu_base(void)
return scu_base;
}
+#ifdef CONFIG_OMAP5_ERRATA_801819
+void omap5_erratum_workaround_801819(void)
+{
+ u32 acr, revidr;
+ u32 acr_mask;
+
+ /* REVIDR[3] indicates erratum fix available on silicon */
+ asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr));
+ if (revidr & (0x1 << 3))
+ return;
+
+ asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+ /*
+ * BIT(27) - Disables streaming. All write-allocate lines allocate in
+ * the L1 or L2 cache.
+ * BIT(25) - Disables streaming. All write-allocate lines allocate in
+ * the L1 cache.
+ */
+ acr_mask = (0x3 << 25) | (0x3 << 27);
+ /* do we already have it done.. if yes, skip expensive smc */
+ if ((acr & acr_mask) == acr_mask)
+ return;
+
+ acr |= acr_mask;
+ omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
+
+ pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n",
+ __func__, smp_processor_id());
+}
+#else
+static inline void omap5_erratum_workaround_801819(void) { }
+#endif
+
static void omap4_secondary_init(unsigned int cpu)
{
/*
@@ -64,12 +97,15 @@ static void omap4_secondary_init(unsigned int cpu)
omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
4, 0, 0, 0, 0, 0);
- /*
- * Configure the CNTFRQ register for the secondary cpu's which
- * indicates the frequency of the cpu local timers.
- */
- if (soc_is_omap54xx() || soc_is_dra7xx())
+ if (soc_is_omap54xx() || soc_is_dra7xx()) {
+ /*
+ * Configure the CNTFRQ register for the secondary cpu's which
+ * indicates the frequency of the cpu local timers.
+ */
set_cntfreq();
+ /* Configure ACR to disable streaming WA for 801819 */
+ omap5_erratum_workaround_801819();
+ }
/*
* Synchronise with the boot thread.
@@ -218,6 +254,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
if (cpu_is_omap446x())
startup_addr = omap4460_secondary_startup;
+ if (soc_is_dra74x() || soc_is_omap54xx())
+ omap5_erratum_workaround_801819();
/*
* Write the address of secondary startup routine into the
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 78af6d8cf2e2..daf2753de7aa 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
trace_state = (PWRDM_TRACE_STATES_FLAG |
((next & OMAP_POWERSTATE_MASK) << 8) |
((prev & OMAP_POWERSTATE_MASK) << 0));
- trace_power_domain_target(pwrdm->name, trace_state,
- smp_processor_id());
+ trace_power_domain_target_rcuidle(pwrdm->name,
+ trace_state,
+ smp_processor_id());
}
break;
default:
@@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
- trace_power_domain_target(pwrdm->name, pwrst,
- smp_processor_id());
+ trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
+ smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}
diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 0ec2d00f4237..eb350a673133 100644
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -36,14 +36,7 @@ static struct powerdomain iva_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IVA_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 4,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* hwa_mem */
- [1] = PWRSTS_OFF_RET, /* sl2_mem */
- [2] = PWRSTS_OFF_RET, /* tcm1_mem */
- [3] = PWRSTS_OFF_RET, /* tcm2_mem */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* hwa_mem */
[1] = PWRSTS_ON, /* sl2_mem */
@@ -76,12 +69,7 @@ static struct powerdomain ipu_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_IPU_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 2,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* aessmem */
- [1] = PWRSTS_OFF_RET, /* periphmem */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* aessmem */
[1] = PWRSTS_ON, /* periphmem */
@@ -95,11 +83,7 @@ static struct powerdomain dss_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_DSS_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* dss_mem */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dss_mem */
},
@@ -111,13 +95,8 @@ static struct powerdomain l4per_7xx_pwrdm = {
.name = "l4per_pwrdm",
.prcm_offs = DRA7XX_PRM_L4PER_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
+ .pwrsts = PWRSTS_ON,
.banks = 2,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* nonretained_bank */
- [1] = PWRSTS_OFF_RET, /* retained_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* nonretained_bank */
[1] = PWRSTS_ON, /* retained_bank */
@@ -132,9 +111,6 @@ static struct powerdomain gpu_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* gpu_mem */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* gpu_mem */
},
@@ -148,8 +124,6 @@ static struct powerdomain wkupaon_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* wkup_bank */
},
@@ -161,15 +135,7 @@ static struct powerdomain core_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_CORE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
.banks = 5,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* core_nret_bank */
- [1] = PWRSTS_OFF_RET, /* core_ocmram */
- [2] = PWRSTS_OFF_RET, /* core_other_bank */
- [3] = PWRSTS_OFF_RET, /* ipu_l2ram */
- [4] = PWRSTS_OFF_RET, /* ipu_unicache */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* core_nret_bank */
[1] = PWRSTS_ON, /* core_ocmram */
@@ -226,11 +192,7 @@ static struct powerdomain vpe_7xx_pwrdm = {
.prcm_offs = DRA7XX_PRM_VPE_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
- .pwrsts_logic_ret = PWRSTS_OFF,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* vpe_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* vpe_bank */
},
@@ -260,14 +222,8 @@ static struct powerdomain l3init_7xx_pwrdm = {
.name = "l3init_pwrdm",
.prcm_offs = DRA7XX_PRM_L3INIT_INST,
.prcm_partition = DRA7XX_PRM_PARTITION,
- .pwrsts = PWRSTS_RET_ON,
- .pwrsts_logic_ret = PWRSTS_RET,
+ .pwrsts = PWRSTS_ON,
.banks = 3,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* gmac_bank */
- [1] = PWRSTS_OFF_RET, /* l3init_bank1 */
- [2] = PWRSTS_OFF_RET, /* l3init_bank2 */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* gmac_bank */
[1] = PWRSTS_ON, /* l3init_bank1 */
@@ -283,9 +239,6 @@ static struct powerdomain eve3_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* eve3_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve3_bank */
},
@@ -299,9 +252,6 @@ static struct powerdomain emu_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* emu_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* emu_bank */
},
@@ -314,11 +264,6 @@ static struct powerdomain dsp2_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 3,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* dsp2_edma */
- [1] = PWRSTS_OFF_RET, /* dsp2_l1 */
- [2] = PWRSTS_OFF_RET, /* dsp2_l2 */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dsp2_edma */
[1] = PWRSTS_ON, /* dsp2_l1 */
@@ -334,11 +279,6 @@ static struct powerdomain dsp1_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 3,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* dsp1_edma */
- [1] = PWRSTS_OFF_RET, /* dsp1_l1 */
- [2] = PWRSTS_OFF_RET, /* dsp1_l2 */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* dsp1_edma */
[1] = PWRSTS_ON, /* dsp1_l1 */
@@ -354,9 +294,6 @@ static struct powerdomain cam_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* vip_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* vip_bank */
},
@@ -370,9 +307,6 @@ static struct powerdomain eve4_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* eve4_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve4_bank */
},
@@ -386,9 +320,6 @@ static struct powerdomain eve2_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* eve2_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve2_bank */
},
@@ -402,9 +333,6 @@ static struct powerdomain eve1_7xx_pwrdm = {
.prcm_partition = DRA7XX_PRM_PARTITION,
.pwrsts = PWRSTS_OFF_ON,
.banks = 1,
- .pwrsts_mem_ret = {
- [0] = PWRSTS_OFF_RET, /* eve1_bank */
- },
.pwrsts_mem_on = {
[0] = PWRSTS_ON, /* eve1_bank */
},
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5b385bb8aff9..cb9497a20fb3 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -496,8 +496,7 @@ void __init omap_init_time(void)
__omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
2, "timer_sys_ck", NULL, false);
- if (of_have_populated_dt())
- clocksource_probe();
+ clocksource_probe();
}
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
@@ -505,6 +504,8 @@ void __init omap3_secure_sync32k_timer_init(void)
{
__omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
2, "timer_sys_ck", NULL, false);
+
+ clocksource_probe();
}
#endif /* CONFIG_ARCH_OMAP3 */
@@ -513,6 +514,8 @@ void __init omap3_gptimer_timer_init(void)
{
__omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
1, "timer_sys_ck", "ti,timer-alwon", true);
+
+ clocksource_probe();
}
#endif
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 84baa16f4c0b..e93aa6734147 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -68,7 +68,7 @@
#include <linux/platform_data/asoc-s3c.h>
#include <linux/platform_data/spi-s3c64xx.h>
-static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
/* AC97 */
#ifdef CONFIG_CPU_S3C2440