ARM: DRA7: Provide proper IO map table

DRA7 uses OMAP5 IO table at the moment. This is purely spurious since
the OMAP5 and DRA7 register maps are different in many aspects.

AM57xx/DRA7 TRM Reference: http://www.ti.com/lit/ug/spruhz6/spruhz6.pdf

NOTE: Most of the drivers are already doing ioremap, so, there should'nt
be any functional improvement involved here, other than making the
initial iotable more accurate.

Fixes: a3a9384a1157 ("ARM: DRA7: Reuse io tables and add a new .init_early")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

5 files changed, 130 insertions, 4 deletions

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 34ff14b7beab..b4fbe50672a3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -297,7 +297,7 @@ static const char *const dra74x_boards_compat[] __initconst = {
 DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
 	.reserve	= omap_reserve,
 	.smp		= smp_ops(omap4_smp_ops),
-	.map_io		= omap5_map_io,
+	.map_io		= dra7xx_map_io,
 	.init_early	= dra7xx_init_early,
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
@@ -316,7 +316,7 @@ static const char *const dra72x_boards_compat[] __initconst = {
 
 DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
 	.reserve	= omap_reserve,
-	.map_io		= omap5_map_io,
+	.map_io		= dra7xx_map_io,
 	.init_early	= dra7xx_init_early,
 	.init_late	= dra7xx_init_late,
 	.init_irq	= omap_gic_of_init,
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index cf3cf22ecd42..749d50bb4ca5 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -198,6 +198,7 @@ void __init omap3_map_io(void);
 void __init am33xx_map_io(void);
 void __init omap4_map_io(void);
 void __init omap5_map_io(void);
+void __init dra7xx_map_io(void);
 void __init ti81xx_map_io(void);
 
 /**
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 820dde8b5b04..c10fb291b99f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -236,7 +236,7 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 };
 #endif
 
-#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
 static struct map_desc omap54xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_54XX_VIRT,
@@ -265,6 +265,53 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 };
 #endif
 
+#ifdef CONFIG_SOC_DRA7XX
+static struct map_desc dra7xx_io_desc[] __initdata = {
+	{
+		.virtual	= L4_CFG_MPU_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS),
+		.length		= L4_CFG_MPU_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L3_MAIN_SN_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS),
+		.length		= L3_MAIN_SN_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER1_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER1_DRA7XX_PHYS),
+		.length		= L4_PER1_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER2_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER2_DRA7XX_PHYS),
+		.length		= L4_PER2_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_PER3_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_PER3_DRA7XX_PHYS),
+		.length		= L4_PER3_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_CFG_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_CFG_DRA7XX_PHYS),
+		.length		= L4_CFG_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= L4_WKUP_DRA7XX_VIRT,
+		.pfn		= __phys_to_pfn(L4_WKUP_DRA7XX_PHYS),
+		.length		= L4_WKUP_DRA7XX_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+#endif
+
 #ifdef CONFIG_SOC_OMAP2420
 void __init omap242x_map_io(void)
 {
@@ -309,12 +356,19 @@ void __init omap4_map_io(void)
 }
 #endif
 
-#if defined(CONFIG_SOC_OMAP5) ||  defined(CONFIG_SOC_DRA7XX)
+#ifdef CONFIG_SOC_OMAP5
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
 }
 #endif
+
+#ifdef CONFIG_SOC_DRA7XX
+void __init dra7xx_map_io(void)
+{
+	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+}
+#endif
 /*
  * omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
  *
diff --git a/arch/arm/mach-omap2/iomap.h b/arch/arm/mach-omap2/iomap.h
index cce2b65039f1..6191d244438a 100644
--- a/arch/arm/mach-omap2/iomap.h
+++ b/arch/arm/mach-omap2/iomap.h
@@ -194,3 +194,66 @@
 #define L4_PER_54XX_PHYS	L4_PER_54XX_BASE /* 0x48000000 --> 0xfa000000 */
 #define L4_PER_54XX_VIRT	(L4_PER_54XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_54XX_SIZE	SZ_4M
+
+/*
+ * ----------------------------------------------------------------------------
+ * DRA7xx specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+/*
+ * L3_MAIN_SN_DRA7XX_PHYS 0x44000000 --> 0xf8000000
+ * The overall space is 24MiB (0x4400_0000<->0x457F_FFFF), but mapping
+ * everything is just inefficient, since, there are too many address holes.
+ */
+#define L3_MAIN_SN_DRA7XX_PHYS		L3_MAIN_SN_DRA7XX_BASE
+#define L3_MAIN_SN_DRA7XX_VIRT		(L3_MAIN_SN_DRA7XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_MAIN_SN_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER1_DRA7XX_PHYS	(0x4800_000<>0x480D_2FFF) -> 0.82MiB (alloc 1MiB)
+ *	(0x48000000<->0x48100000) <=> (0xFA000000<->0xFA100000)
+ */
+#define L4_PER1_DRA7XX_PHYS		L4_PER1_DRA7XX_BASE
+#define L4_PER1_DRA7XX_VIRT		(L4_PER1_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER1_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_CFG_MPU_DRA7XX_PHYS	(0x48210000<>0x482A_F2FF) -> 0.62MiB (alloc 1MiB)
+ *	(0x48210000<->0x48310000) <=> (0xFA210000<->0xFA310000)
+ * NOTE: This is a bit of an orphan memory map sitting isolated in TRM
+ */
+#define L4_CFG_MPU_DRA7XX_PHYS		L4_CFG_MPU_DRA7XX_BASE
+#define L4_CFG_MPU_DRA7XX_VIRT		(L4_CFG_MPU_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_CFG_MPU_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER2_DRA7XX_PHYS	(0x4840_0000<>0x4848_8FFF) -> .53MiB (alloc 1MiB)
+ *	(0x48400000<->0x48500000) <=> (0xFA400000<->0xFA500000)
+ */
+#define L4_PER2_DRA7XX_PHYS		L4_PER2_DRA7XX_BASE
+#define L4_PER2_DRA7XX_VIRT		(L4_PER2_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER2_DRA7XX_SIZE		SZ_1M
+
+/*
+ * L4_PER3_DRA7XX_PHYS	(0x4880_0000<>0x489E_0FFF) -> 1.87MiB (alloc 2MiB)
+ *	(0x48800000<->0x48A00000) <=> (0xFA800000<->0xFAA00000)
+ */
+#define L4_PER3_DRA7XX_PHYS		L4_PER3_DRA7XX_BASE
+#define L4_PER3_DRA7XX_VIRT		(L4_PER3_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER3_DRA7XX_SIZE		SZ_2M
+
+/*
+ * L4_CFG_DRA7XX_PHYS	(0x4A00_0000<>0x4A22_BFFF) ->2.17MiB (alloc 3MiB)?
+ *	(0x4A000000<->0x4A300000) <=> (0xFC000000<->0xFC300000)
+ */
+#define L4_CFG_DRA7XX_PHYS		L4_CFG_DRA7XX_BASE
+#define L4_CFG_DRA7XX_VIRT		(L4_CFG_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_CFG_DRA7XX_SIZE		(SZ_1M + SZ_2M)
+
+/*
+ * L4_WKUP_DRA7XX_PHYS	(0x4AE0_0000<>0x4AE3_EFFF) -> .24 mb (alloc 1MiB)?
+ *	(0x4AE00000<->4AF00000)	<=> (0xFCE00000<->0xFCF00000)
+ */
+#define L4_WKUP_DRA7XX_PHYS		L4_WKUP_DRA7XX_BASE
+#define L4_WKUP_DRA7XX_VIRT		(L4_WKUP_DRA7XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WKUP_DRA7XX_SIZE		SZ_1M
diff --git a/arch/arm/mach-omap2/omap54xx.h b/arch/arm/mach-omap2/omap54xx.h
index 2d35c5709408..0ca8e938096b 100644
--- a/arch/arm/mach-omap2/omap54xx.h
+++ b/arch/arm/mach-omap2/omap54xx.h
@@ -30,6 +30,14 @@
 #define OMAP54XX_CTRL_BASE		0x4a002800
 #define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
+/* DRA7 specific base addresses */
+#define L3_MAIN_SN_DRA7XX_BASE		0x44000000
+#define L4_PER1_DRA7XX_BASE		0x48000000
+#define L4_CFG_MPU_DRA7XX_BASE		0x48210000
+#define L4_PER2_DRA7XX_BASE		0x48400000
+#define L4_PER3_DRA7XX_BASE		0x48800000
+#define L4_CFG_DRA7XX_BASE		0x4A000000
+#define L4_WKUP_DRA7XX_BASE		0x4ae00000
 #define DRA7XX_CM_CORE_AON_BASE		0x4a005000
 #define DRA7XX_CTRL_BASE		0x4a003400
 #define DRA7XX_TAP_BASE			0x4ae0c000